Will not update to Vista SP2 - but think it is.
Hello
What happens is-
- I run the SP2 Setup (which was updated by the way is only 6 MB is told)
- I got the warning in close all programs and that it might take several reboots
- When I click on Next , the dialogue IMMEDIATELY disappears and I get Windows Update says it is installed correctly (and I mean immediately)
- I find the update history and reports of successful installation but there is no trace of what either updated elsewhere as in the properties of the system or the installed updates
- I run Windows Update, and it offers to install SP2 again
Have repeated several times - see screenshot:
http://img4.imageshack.us/img4/1122/03062009022109.PNG
I'm running a Lenove 3000 N500
Any help greatly appreciated
Hello
Thanks for all the help
I couldn't run even in safe mode.
So I decided to just do a full reinstall from the recovery partition.
Given that I had downloaded the full SP2 that combines the previous updates, it looked like a great time.
SP2 installed without problems now.
Only problem now is that Lenovo ThinkVantage Updater is not yet compatible with SP2 - but that's for another forum!
Tags: Windows
Similar Questions
-
Google Chrome will not update on Vista
Get this message from Google Chrome which signals that Google Chrome will not update with Windows Vista more.
Should I do something?
I searched through the updates of Windows to see if we have missed something, but nothing helped. I saw a post about the pre installed "youcam"... we should be arrived at?
Do not uninstall Google Chrome still... You can install Firefox, front - and then import your Google Chrome Favorites, before you uninstall.
Updates to Google Chrome does not come through Windows Update, but when you click on the "Hamburgermenu" in Google Chrome. (3 lines under the Red close button)
See help
Click on Google Chrome
This will start the update...
-
I've had Vista for a few years and had installed SP2. After a pretty bad fall, I had to "restore to the factory settings." This has left the machine as it had been when he came out of the box.
I checked for Service packs, after he tried to update to IE7 for IE9 to say that I couldn't because I didn't have to update MS. I checked the system and found or SP1 or 2 is installed.So I checked updates, where it was SP1 is available. I clicked on "install" and followed the couple to guests where to he started to update. He completed the process and that you follow point that SP1 has been installed, however...When I check the system again, there is no sign on SP1 installed on the machine, and when I go to check updates, SP1 is also available, like as if it was never installed. Ive gone round in circles for a few days. Whenever it appears to install, but whenever he of not here and keep appearing as ready to be downloadedHelp, please!Hello
You did it happen any changes made to the computer before the show?
Conduct the audit mentioned of the following measures:
Step 1:
Check if you have installed Windows Vista SP1 on your computer:
To do:
(a) click Start.
(b) type winver and then press enter.
Step 2: Perform the steps in the following article and see if it helps:
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
http://support.Microsoft.com/kb/910339
Let us know if this helps
-
Windows Update will not update on Vista
Have a Dell Inspiron 530 desktop computer that I use very rarely. Windows Vista service Pack 2 32-bit, Internet explorer 9. Last used in July 2015 and was properly executed alll Windows updates. When I turned this back on a week, he n;' t running windows updaIe, he just constantly sought to updates - no error code. It would also not essential security update. I thought that maybe I had lost the connection with microsoft, so I checked to see if I could download Security Essentials, which I did and installed successfully as he said it was the essential security upgrade and the definitions are updated.
When I initially turned it a week ago, I noticed that it was not keeping the date correctly, so I figured well battery CMOS was dead. Put a new battery in and now is keep date and time correctly.
All other functions of the computer seem to work normally, internet, Word, etc.. Just cannot get a Windows Update. I checked F2 Setup and it does not appear that anything was out of sync because of the battery flat, except he apparently went back to the default values on boot encode as he thought he had a diskette that is not. Changed and it is now successfully boot from C:
Any thoughts? Thank you.
Install KB3078601, KB3109094, KB3145739, KB3164033, KB3168965 and KB3185911.
Best regards, VZ
-
Error Code 80096001 appears during tried updates, will not update
I tried Microsoft Fixit 50202.msi and Microsoft Fixit.wu.run.exe and it indicates the default location has changed, but it will not restore. He also says that it has fixed the problem. Still will not update windows Vista
Hi John K 4114.
The steps of troubleshooting in this thread has helped other users affected by the message 'ongoing'.
Let us know if that helps.
-
TOSHIBA DVGW/HD TS-L802A-ATA do not work after the update to Vista SP2
Hello
My devices Toshiba P200 DVD/CDROM has stopped working (code 39) since I've updated with Vista SP2.
TOSHIBA DVGW/HD TS-L802A-ATA
RSFOBUJ XEBG5QVCPQ7C SCSII run Microsoft Fix It (http://support.microsoft.com/gp/mats/?ln=en) + "your CD or DVD drive cannot read or write media.
But it has not solved the problem.I download and run the Microsoft devcon command-line utility.
> devcon stack gencdrom
IDE\CDROMTOSHIBA_DVDW/HD_TS-L802A___TO35___\5&31E4E654&0&0.0.0
Name: TOSHIBA DVGW/HD TS-L802A ATA Device
Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
Controlling service:
CDROM
Lower filters:
tdcmdpst
5 SCSI\CDROM&VEN_RSFOBUJ&PROD_XEBG5QVCPQ7C&REV_1.03\ & 36E5972 & 0 & 000000
Name: RSFOBUJ XEBG5QVCPQ7C SCSI CdRom Device
Setup class: {4d36e965-e325-11ce-bfc1-08002be10318} CDROM
Controlling service:
CDROM
Lower filters:
tdcmdpstI guess that this lower filter of "tdcmdpst" (the writing of TOSHIBA motor filter driver) is the issue.
But I can't remove the filter 'tdcmdpst' even with admin rights.> devcon classfilter lower tdcmdpst
DevCon has failed.
How can I remove this filter to upgrade Vista SP2?
Kind regards
Nicolas
Can roll you back OS to an earlier time before installation of SP2?
Drive works properly again? -
I have windows vista 32 bit on my Toshiba laptop. I recently reset back to factory settings using a disc of resettlement. Now she will not update. I was check updates leaving work for a few hours and it does not find all that it just keeps check found nothing. There is no error message it is just stuck updates. It says last update installed never and never last audit. It just seems to be stuck looking for updates.
Try the following: download and install all the missing updates mentioned in the table above to this page:
These are difficult to manage for the client to update. Set never 'Find updates' automatic updates and reboot before.
Best regards, VZ
Ty so much, it was long to apply, but ultimately it worked!
I looked for a solution for months. My update of Windows vista displays 153 updates. He was just looking for months until I did this: D
great work! New Ty
-
My firefox is the latest version, but will not update
My firefox is the latest version, but will not update
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
-
Windows vista service pack 1 will not update. I get Error 80070002.
Vista - install a drive - error 80070103
I am trying to install a disc and it says I have error 80070103
I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002
Hello
See if that helps you.
"Windows Update 80070002 error."
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
"If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »
And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
Or you can repost you this link in the Windows Update Forum.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
See you soon.
-
I realized that I had a message to update for a while then when I checked, I found that the app CC was missing. I downloaded and installed the application, but it will not update of software. In the creative cloud Panel, the only options I get are the Home tab to check the activity and the Stock tab. The applications tab is missing. How can I get that back so I can update photoshop and lightroom?
Please, try the steps mentioned here https://helpx.adobe.com/creative-cloud/kb/apps-panel-reflect-creative-cloud.html
Let me know if it works!
-
my adobe handler will not update. Adobe manager displays the updates but won't go further. What could be wrong? There is nothing wrong with my computer, although there may be a setting that needs to change, but I'm guessing.
Try direct updates
https://www.Adobe.com/downloads/updates/
updates CC:
http://prodesigntools.com/Adobe-CC-updates-direct-links-Windows.html
http://prodesigntools.com/Adobe-CC-updates-direct-links-Mac.htmlCC updates of 2014:
http://prodesigntools.com/Adobe-CC-2014-updates-links-Windows.html
http://prodesigntools.com/Adobe-CC-2014-updates-links-Mac.htmlCC updates to 2015:
http://prodesigntools.com/Adobe-CC-2015-updates-links-Windows.html
http://prodesigntools.com/Adobe-CC-2015-updates-links-Mac.html -
LR and PS will not update 'Download error' 49 customer service contact? anyone had this problem and how to solve? was running windows 8.1 and now running windows 10 but had the same problem with two BONES
Check your hosts file. to help with this and more:
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
-
I could not update Windows Vista for months. I fixed it once by using the Vista disc and is not updated yet. What can I do now? And how this affects the integrity of the PC?
Thank you
Peg
Hello!
Thank you for using the Microsoft Windows Vista Forums.
To fix the windows update problem, Microsoft came with reset of the Windows Update. Help, clik here .
Make sure you click on "FIX IT"
You can always access this page:
http://support.Microsoft.com/kb/971058
The respect of
Anurag Shukla.
-
Windows Vista Home Basic will not update, System 5 error, access is denied.
My windows will not update. Microsoft fixit tool will not install on my machine. When I try to reset the updates manually I get the error System 5, access is denied.
Hello!
This link may be usefulThank youMakoi -
WWhat can be done when Revel app on iPhone and iPad will not update? Delete apps and reinstall? Photos will be lost?
Please see the post below updates on the issue of the revel facilities:
Maybe you are looking for
-
Apple Gen 4 tv says restoration
How to restore an Apple TV 4th Gen without iTunes?
-
Problem of recovering files after completing the reduced image of the system
I wanted a quick and easy way to remove bloatware on my HP Pavilion dv6 laptop and I recently found the option to minimize the system image. During execution of the task, I was given the option to first back all my files and I thought it was excelle
-
Have no status levels monitor/ink on my Epson Stylus Photo 1400 inkjet
My computer operating system is MS XP Pro and my Epson ink jet is connected directly to a USB port. All the other features of my printer works fine, as was my "Status Monitor" (all my cartridge showing ink levels) until recently. Epson by phone and o
-
Sonic activate the module popping error at startup guard
The question preceding above is correct. Activate Sonic module drives me crazy. Please to eliminate this problem. Thank you Alyne B may E-mail address is removed from the privacy *. Original title: sonic activate the module continues to appear. How
-
Goonsearch has become my default browser, how can I remove this divert Explorer
Hello Goonsearch has become my default browser. When I go to tools and change the default to google it does not take effect. can you suggest how I can remove this away from Solution Explorer. Thank you