New... computer power supply begins with 20pin but interrupts when 4 pin is connected

Similar Questions

• My new power supply work with my motherboard?

  Hello

  I reasontly bourght a few upgrades for my PC.

  I bourght an i7 870 and an AMD 5670 + a new power supply

  So my question, what ive in doubt, my new PSU(CX-500) work with my motherboad (MS-7613(Lona-GL8E)?

  Thanks in advance

  René Tyrsted

  Thank you.

  Yes. It will work.

  However you will probably find a little tight because of remaining unused cable bundles. My preference for the PC ATX Mid-size boxes are of the modular power supply. With a modular power supply connect only s connector as much as you want.

  Do the upgrades one at a time.  Start with the power SUPPLY and any other origin. Check that it works and then close.  Then go to the graphics card.

  Happy update.

  Best regards
  ERICO

• I have a new computer toshiba laptop satellite with windows 8. NEED HELP!

  I have a new computer toshiba laptop satellite with windows 8.  It starts to turn on everytime I open the lid. How to disable this option? I want to press the button to turn on the laptop, not just open the lid? Thank you

  Hello

  Try to go into the Panel... Power options, and then select "Change Plan settings".

  Now, select 'Change Advanced Power Settings'... on the screen that opens, you will see a menu with different options, which is "Power button and lid"

• I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

  I have Adobe Acrobat Professional 7.0 I want to migrate my new laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put the serial number, it tells me its invalid.

  You're right: 22020134.exe is the download of the installer of my link.  Did you use the serial number on the right of this download link?

• My laptop was connected to the internet before, but now when I want to connect I get this message "application Profile problem!

  Problem to apply the profile! "How to fix

  Hi, my laptop is connected to the internet before, but now when I want to connect I get this message "Application Profile problem!" how to solve this problem.

  I search in Google allot, but I a not end an answer to solve my problems. Can someone help me?

  Thank you.

  Hello

  ·         Using internet connection wired or wireless?

  Follow these steps:

  Step 1:

  Updated driver for your network card to the last. Also updated the firmware on the router as well. Follow the steps in troubleshooting section and check if that helps:

   

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  Step 2:

  Follow the form of measures troubleshooting article and check if that helps.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  This behavior is generated by the Manager of Intel wireless cards. This feeder is usually loaded with the Intel Wireless card drivers. If that's the problem, you can try Intel support and check.

• I need a way to test the computer Power Supply

  Im running a Dell XPS 2005

  Intel Pentium 4 3.4GHz

  I get a BSOD (Blue Screen of DEATH) every once in awhile.  Especially at the start.

  The code seems to be something with hard drives.

  Now being an old laundry and adding 2 additional discs for a total of 3 got us dispatchers to power everything.

  I also have a card Nvidia 9800GT 1024Mo RAM with 2 power six raced him also.

  I looked outside my case, but cannot see what is my power to power supply.

  I know that I was able to open it but I was wondering if there was any software a bit like CPU - Z that could read what is inside my computer?

  Maybe something that could match the everything that is inside and see how much is used?

  I will build a new i7 soon, but for now, that's what I have.

  I ran the PPBM4 test and think im going to take the LAST spot.

  Here are the results:

  Powered by ID DESIGN, personal or computer
  DELL, the computer manufacturer
  XPS, computer model
  329.6, time Total dry Benchmark
  54, AVI encoding dry time
  179,6, dry MPEG has elapsed
  96, seconds rendering time
  Intel, CPU manufacturer
  4 550, Pentium processor model
  3.4 GHz processor
  1, number of CPU chips
  1, total number of cores
  3 GB RAM
  4.2.1 APP Version PPBM4 DV
  XP 32, OSVersion
  SATA disk OS Interface
  1000 GB of capacity OS disk
  7200, disk OS speed
  SATA Interface drive project
  500, disk space for the Go project
  7200, project disc speed
  750, disc preview interface
  500, disk capacity Go Preview
  7200, preview disc speed
  SATA Interface output disc
  500, output GB disc capacity
  7200, speed disk
  NVIDIA GeForce 9800 GT graphics card
  This test shows really is the slowness of my computer, comment

  Enjoy: GLenn

  Glenn,

  Maybe your motherboard does not support this (being a bit older), but I'd be interested to see the results as follows:

  

  and

  

  because that will show the tensions on the different tracks.

  BTW, your disk temperature is quite high and the CPU and the GPU. These are of course former components and these run hotter than the current CPU/GPU, so, we can't really compare these modern components, but cooling can be a problem. When was the last time you cleaned the inside of your suitcase, removed all the dust accumulated on the CPU cooler and clean your system fans?

• Power supply is turned on, but not fans.

  I have a Gateway with Vista Home 5478. My power supply is on, but the vista system will not start. The power light is on, but that's all. I also noticed that all fans, including the fans inside my diet, are dead. I changed power supplies, increased from 400 to 430 watts, and it has not changed a thing. Is this maybe my motherboard?

  It looks like a hardware problem.

  Contact Gateway if under warranty.

  If this is not the case, contact a local and trusted computer repairman.

  See you soon.

  Mick Murphy - Microsoft partner

• Power supply problem with Dell Inspiron One 2310

  Hello

  I have a problem with my computer Dell 2310, as far as I can see that the power supply burned out or something similar. Blue bright lighting supply cable indicates that power delivery is correct, but the power light on the power button does not respond.

  I suspect that the power supply is blown and needs to be replaced, I hope that a replacement is available on the list of spare parts and hits on how to properly check if my preliminary diagnosis is correct. I see no reason to suspect problems with the other componentts such as motherboard, memory, disk HARD etc.

  Grateful for advice on how to check my diagnose some material.

  Kind regards

  Axel

  Hi Axel,

  Sorry, no one answered. This is a user forum. We organise warranty service. You should contact Dell technical support in your country.

• Power supply problem with HP officejet 4620

  I just bought a Hp Officejet 4620 printer all-in-one. It works fine apart from a problem that is if I turn off the power by pressing on the button on the front of the printer, the power goes off. If I then try to turn on the machine it will not until I unplugged the power cable and then reinsert. I think I should be able to put the printer without having to unplug the power cable from each time I want to use it. Would appreciate any suggestions.

  Hi - I think I have the same problem. At, first once I power off, the light on the back of the printer green power stays on and I turn again on OK. Later, the green light goes off and I have to unplug the power cable and plug it back before works the power button.

  The power supply inside the printer is very loose, and I assumed that the issue was a faulty connection, especially since when I move around the light seems to sometimes get a lot brighter. I just replaced the printer and the power supply in the new looks the same, IE loose, so I replaced it again from a different source in case it is a batch production number. I read in a post "Photosmart 5510: brick of power inside the unit does not move" here which suggests in bulk may be normal.

  I also read on power off and power on demand off, but as I put the wireless printer, these shouldn't have been activated, and in any case, I guess they should affect only the power button and should not require that you disconnect and reconnect the power cable.

• New computer, need to Rebel XSI utility but can not find the CD

  Hi all

  We just got a new computer, an IMAC and I have an EOS Rebel XSI, I want to use with it.  Currently I use the camera with my laptop Mac under OSX Yosemite.  I can't find the CD that came with it (and doubt it would work anyway), so not sure how to get a beam compatible EOS Utility that will work with the camera and the computer.

  Is there a way to download this and is it available?  What utility EOS Rebel is compatible, if any?  I plan on implementing this new computer with the camera (if possible) the weekend of the new year.

  Thanks to all in advance, any help is highly appreciated.

  Go here and download the EOS Solution Disk file; This is a digital image of the CD.

  https://www.USA.Canon.com/Internet/portal/us/home/support/details/cameras/support-DSLR/EOS-Rebel-XSi...

• New computer - what to do with my CC apps?

  Hello

  At the moment my CC apps are installed on a Windows computer, but I'm going to buy a new computer (Apple iMac). My question is; There are steps to take to ensure that I will be able to download and (re-) install my CC product on my new computer (e.g., uninstall windows, install Mac OS)?

  I look forward to receiving your response.

  Best regards

  Wendy

  Simply run help--> Sign Out of any one of the programs to free activation. In addition there is nothing more necessary.

  Mylenium

• The Portege 7020CT power supply works with the dock?

  Hello

  I have a Toshiba Portege 7020CT (I know its old)
  I would buy a Toshiba PA3007E-1DST on eBay!
  In the description of sellers on eBay, it is written that a power supply is not included!
  So he lies to be included power supply? Or am I ment to use my laptop Portege of power?

  All responses are greatly appreciated!

  Thank you
  Nick

  Eh, it's really amazing that someone still use this old machine Portege. I hope it works perfectly.
  If I m remembering well at the back of this port replicator is the DC power connector, so you should be able to use the AC for your Portege power cable and connect it to the port replicator.

  The connector must be the same.

• New computer laptop need 64 bit version but initially bought the 32-bit version.

  I just got a new laptop, a 64 bit version of Windows 7.  However, my download of Lightroom is the 32-bit version.  Does anyone know if I can I get the 64 bit version and use it on my new computer without having to pay more?

  Thanks for all the advice I can get.

  Just download it from the site Web of Lightroom (the trial version is the full version) and select the correct version. Simply enter your serial number and you will be ready to go.

• Adding synchronization to my new computer cannot me sync with my account on my other computer.

  The window to add information about synchronizing with my existing computer has 2 buttons - add a new account - and - I have an account-. The Create button again will respond, but since I already have an account that did not help. The button "I have an account" will not answer. Touch screen finger or stylus and highlighting the button and using the key "Enter" all have absolutely no effect. I deleted Firefox and reinstalled but still exactly the same. My OS is Windows 8.1. Any ideas on how I can take this form d...d?

  Mode of contact if you have the metro market. Try to click with the right button on the link and open it in a new tab. Or you can manage the account in Firefox > Options > Sync
  Unfortunately Metro will continue, but it should normally out of touch mode.

  If nothing appears in the error Console? When you click on the link?

• I have a windows vista desktop computer. My usb adapter see all fi networks wi and the lapttops work with it, but it says that it cannot connect when I try to connect. What is my settings on my pc?

  My computer settings re-put recently. It's not the adapter I bought a new and the wi - fi works very well. Help, please! I already did the thing where you go on manage wi fi represents and has deleted information and tried again, but they don't seem to work.

  Hello

  
  

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  
  

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.