New controller to a PE2950 for readers of 4 TB
We have 2 new Seagate SAS 4 TB of disk and a (cleaned) don PE2950 (SAS). Which controller should I get welcome the biggest readers.
I tried to install 2012 Server Essentials and not very far (didn't a driver). I would like to RAID and I lean toward RAID0, but I'm open to other ideas such 2012 virtualization.
Thank you!
Gary
Service tag
None of the supported controllers can handle 4 terabytes of disks, and not all unsupported controllers working in the system. If you try a third-party card, I recommend Adaptec or LSI and just know that you won't be able to use it in the 'ordinary' storage location (where to go of 2950 controllers PERC and SAS 5/6 5/6). PERC 5/6 and 5/6 SAS pilots should originate from the server 2012, so if it does not find the drives to install, then you probably have a PERC 5/6, which is NOT compatible non-RAID - you must first configure RAID until all disks are visible. Do not use RAID 0 functions. Period. Tags: Dell Servers Communication controller need simple pci for an old hp dc 5800 desktop Original title: looking for always communication controller need simple pci for an older hp dc 5800 desktop vista business 32-bit Communication controller map Add-ons, are hard to find at low prices... Try this link. http://www.serversupply.com/controllers/ This company has what it ever developed for a pc, new/used/rebuilt... Also, look at the hardware of pc from amazon.com Migration 1240 APs from a controller to a new controller Hi guys,. I want to install a new controller 4404 and I just want to move the access points that are associated with my current controller to the new controller once installed. The plan is to change the DHCP server once my new WLC is ready and change address IP 43 option of the old controller to the new controller. This seems simple enough for me. BUT, I know that flash LWAPP on the AP sometimes gets stuck, and all access points are drilling above the ceiling and would be a nighmare to lower the ceiling and console in each of them. If at the initial plan of simply by changing the option of server DHCP 41 in the new work of WLC IP address OK, or do a big risk for getting low ceiling tiles and all that jazz? Please can someone advise me? Thx a lot indeed. Ken Hi Ken, First of all, if both controllers to run the same code, there is no program flash. Yet, the APs tend to remember the previous controller, that they were connected, so you might see APs taking time Looong to join the new controller, but they are expected to join later in any case. Some other ways to do it: -my favorite: Add the new controller to the same group of mobility than the first and let them know each other (add each IP and MAC controller to another). Then define this new controller the PDC on all points of access, restart them. -Variant: If you use WCS, use a model to push the APs for the new controller. -If you change the controller, set up a new one with the same IP addresses as the old (and of course to remove the old before you plug in the other). -You can also put one of the APs in the same subnet as the other and use OTAP for others to join. Don't forget that option 43 is just one means, among others, for the AP to the discovery of controllers as much as she possibly can before choosing which is best to join. Change option 43 will not remove the info on the former Comptroller of the memory of the AP, then it might be more effective to push toward the new more gently... but the technique 43 option should work even when... HTH J Type of SCSI controller and the driver for Win XP Pro Can anyone tell me please what SCSI type should I use for Windows XP Pro? Any SCSI controller I use, VSphere, ensures an error telling me that Win XP does not support the driver that uses VMware ESX to SCSI virtual devices - but it works very well. Any help is appreciated. TY This is the document that I always follow when creating XP workstations, http://www.VMware.com/files/PDF/XP_guide_vdi.PDF Note that you need the new version of the driver for new service packs. That said, like André request can you put a picture of your error. As a result, I'm moving this post to the guest OS of the forums section. What is the new version of the software for iPad pro What is the new version of the software for iPad Pro TThe latest version for the new iPad 9.7 Pro is iOS 9.3.1. Apple pulled iOS 9.3.2 for this device because there were some problems with it and they have not released a fix yet, if you have the bigger iPad Pro, it is 9.3.2. Qosmio X X 770-11 - new motherboard and power supply for sale Brand new motherboard and power supply for sale Also Intel® Core i7-2670QM CPU Y at - it a new version of NOR-VXI for Linux including Red Hat Enterprise 4? We now use the NOR-VXI 2.1 on kernel 2.6.19, it works very well. Now, we try to use on kernel 2.6.20, but it fails to compile the driver for nivxi, it seems not easy to resolve compile errors, do you know if there is a new NO-VXI software released for Linux? Thank you Huaqing Zhan mdsaero, According to this article in the knowledge baseon ni.com, our last official kernel that is supported is 2.6.15. This can be updated since you say that you can run on 2.6.19 I'll check with R & D to see what the latest status of this driver. Thank you controller vga compatible video for hp dx6100m Hello Everyone please. so I can get the video controller (vga compatible) driver for hp dx6100m minitower pc? Try these messages. What video card is installed in your PC? Hello I am drivers mising Bus controller universal series (USB) for hp hp Notbook - 14-r100nx for win 7 I search in google using pilot id n I find the driver but that drivers for asus I try download n installation, done but can not go windows after restart So what I would do... ?? Hello: After reinstalling W7, this driver USB3 is good for both versions of W7 bit and includes the driver for the chipset that has your laptop. Download, unzip and run the setup.exe file. https://Downloadcenter.Intel.com/download/23789/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC After response failure attaching pictures to the email received, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply. Hi Mike,. You are welcome. If you have any other questions, you can always report to Microsoft Answers. My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers. My HP DVD/ROM does not appear in the device under my computer Manager or when I scan for readers, most of the time. Every now and then it will be visible and I can use it but 90% of the time it does not exist. I tried the regedit fix, nothing. I tried the program Microsoft Fix It, it tells me it cannot locate a DVD/ROM. I removed, cleaned and reinserted my DVD/ROM drive, but no difference. I tried everything, except the upgrade to Windows 7... who will be my last resort. Hello gargoyle28m, If your hardware is not detected to upgrade to Windows 7 is not a resolution. This issue may be caused if the DVD drive is faulty or connections loose on the mother board. You may need to check the connections. I suggest you check if the DVD drive works on another computer. You can contact the manufacturer of your computer to help you with this problem. Thank you Get a new case and power supply for my HP Pavilion a6355.uk 1. sound of the HP Pavilion a6355.uk 2. Windows 7 Professional 64-bit 3. no error message 4. it is not a problem, but its had a new graphics card, new ssd, another hard drive, removed the 500 GB hard drive, and that's all I think. Hi, I want to get a new case and power supply for my office If I want is http://www.pcworld.co.uk/gbuk/antec-one-0-761345-15970-8-atx-full-tower-pc-case-black-13374257-pdt.h... The power I want is http://www.pcworld.co.uk/gbuk/zs650w-uk-zs-series-ocz-zs650w-uk-atx-psu-650w-11342059-pdt.html Is 650 Watt most the jury can take? I read somewhere that most can take is 650 watts. My only concern is that, how do you take the I/O shield? I've never done before. Yes, it will fit your card mother Μatx. PS > remember to toggle the toggle SOLVED / SOLUTION to the right of MY post/reply. How to solve: ' Enhanced Standard PCI to USB Host Controller: a driver (service) for this device has been disabled. " Another driver can provide this functionality. (Code 32). » Just to ensure follow-up on the post of joel S can you check the following registry key, which relates to the USB: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000) Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window? If so, what is 'Data' for these names? New second screen will Dim for 2secs sometimes. Original monitor problems title: Dual I have just set up another monitor in the office. Are Dell monitors, the original is a 23 "as the news is a 22" monitor. The problem is that the screen on the new monitor will sporadically dark for 1-2 seconds at a time. Anyone know what causes this problem? Hi Will, Sorry for the late reply. It can occur due to lack of updates, damaged or corrupt drivers and settings on the monitors. I suggest to update the display drivers for computer and monitors by visiting its respective manufacturers Web sites download and install the latest drivers and check. What is the brand and model of the computer? Updated a hardware driver that is not working properly http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly If the problem persists, then, refer to the article. Solving the multiple monitor problems: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-multiple-monitor-problems For more information Work and play better with multiple monitors: http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors I hope this helps to solve the issue. If the problem persists please contact us. We will be happy to help you. How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9 How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9 'option 43 hexagonal f104c0a80a05' looks right to me... If you're talking about only a few APs, you could hold the AP in the same vlan as the WLC Management Interface and allow discovery by diffusion... Once he knows the controller you could put in a different subnet and you don't even need option 43. But then again, Option 43 I guess is a safe bet to ensuring that the always AP knows an IP address to find out. I keep getting FF or error that responded to the questionnaire. When I close it I get "your FF profile cannot be loaded. I read about the removal of the parent.lock. When I try to delete told me "can not delete the file because it is being used. So w 2015 Macbook: keyboard product strikes without touching (for only the T key) I have a Macbook or 2015 in perfect condition, original owner, never damaged, still under warranty. A few months ago, I noticed that the T key would occasionally insist on its own. With nothing, contacting the keyboard, keys T would have picked up. T 1020 more: Y at - it an option to select food tray at the time of the impression paper I like select feeding tray is 1 set of 2 at the time of giving the option to print. Y at - it a seting in the printer in seats option or option. m125nw HP mfp error: error whin I try to copy I have a problem in the m125nw hp mfp errorEvery time I try to copy and then and show me teas messages and then return to the ready screen SAN starts a B200M2 with local disk I have a B200M2 with two local disks in it. Currently, I'm SAN all my startup B200M2. If I had a few drafts to the blade, but I didn't so I go in, I'd take the local drive. Service profile, I configure to configure my blades has the boot order usiSimilar Questions
Posted by jtk
4 096 + 4 096) MB, DDR3 RAM (1 333 MHz) memory
1 000 hard drive (Solid State hybrid 4 G Drive with 500 GB and 4 GB of memory NAND flash + 500 GB) GB
Jim Kerr sent from my iPad
Hope I'm doing this right - tried restar, apparently seeking the answers and by publishing this request elsewhere. Appreciatte guidance!
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.Maybe you are looking for