new driver hp p1005 windows 8

Similar Questions

• How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Wow for on 1 computer install 2 operating systems with 2 hd

  I have 2 hard drives; We have Windows XP and the new one is empty (empty) installed on a computer.  I would like to install Windows 7 on the new hard drive.  How can I install Windows 7 onto the new drive while keeping Windows XP on the old drive?

  Thank you

  Hello

  Sound pretty simple you just need to start from the disc and choose the 2nd hard drive during the installation of windows 7
  your xp will remain such what. every time that you start the system it will ask you to choose which operating system you need
  Start with.
  thanx.

• Partition the new drive and put windows on a small partition, how can I "move it".

  Hard drive crashed and had to get a new.  We partitioned the 500 Gig into 5 segments C:.5 Gig F:10 Gig G:H: I: integer 100 Gig... We used the production disks for the computer will... After a window few months started slow like a turtle, and then began there was not enough space on the drive to work. Other readers are empty or almost empty.  I am hoping there is a simple way to move everything to another drive with more space or something.  I just drag and start again, but I have programs that I also installed that I have since lost the discs too much that I don't want to lose.
  Thank you
  Zyn

  Thanks for the info... uh do often criticize people on this site? I'm just a question because I am very novice in computer technology and I trust often more educated people. But I don't like to be belittled because I thought it was one person and another don't think it's a good idea. Worried if I should keep coming back here to get help or not.

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• Can I install Windows XP on a new drive with the product key only?

  The hard drive on my HP desktop computer failed and died.  I don't have a recovery disk.  Can I reinstall windows XP on a new drive as Windows XP product key is located on the cover of PC.  If so, how?  Any suggestion please!

  With the procuct only key?  No, you cannot, the product key is just a combination of 25 alphanumeric characters, where the installation files will come from?   You will need to contact HP for a recovery disc.

  John

• New Driver for MFC-4800 for Window Vista 64-bit?

  Hello
  How can I get my printer Brother mfc 4800 to print using Windows Vista 64-bit.  The printer is connected by usb cable and the machine is recognized by the computer.  It appears in Control Panel > printer folder.  When I choose printer and each attempt a test page or print a document the printer "ramps" upward as it wants to print but nothing prints ever.  This printer is connected to a computer, that I just replaced that had XP as an operating system.   Printer drivers claim to be "integrated" in Vista. I call brother and they say he works at their end, there is something missing on the microsoft side.  If you the new driver or support can you pls send.

  I hope someone can help. Thank you.

  Got

  http://welcome.solutions.brother.com/BSC/Public/Templates/DownloadTop.aspx?NRMODE=Published&NRNODEGUID=%7b44CBEF26-F458-4FEF-B683-5F7B6D26AF08%7d&NRORIGINALURL=%2fbsc%2fpublic%2fas%2fau%2fen%2fdlf%2fdownload_top%2ehtml%3freg%3das%26c%3dau%26lang%3den%26prod%3dmfc4800_as&NRCACHEHINT=NoModifyGuest&prod=mfc4800_as®=as&c=au&lang=en

  Above is the link for your model printer MFC 4800 drivers.

  If you click on drivers in STEP 1, then STEP 2, check for the operating system, you will see that Vista is not an option, and so the Vista drivers were never written for this model of printer by brother.

  They rely on drivers XP to do the work for them.

  Brother is the one who wrote the drivers for its hardware, not Microsoft.

  I suggest that revisit you brother and ask them when they wrote the so-called Vista compatible drivers for Microsoft.

  It's all brother wrote for your model:

  MFC-4800 > downloads

  Downloads

  Manuals

  Frequently asked questions & troubleshooting

  Utilities/Windows Vista®

  Resolution improvement tool scan (WIA)

  Language	Version	Size	Release Date	File
  English	B	0.06 MB	03/05/2007

  Version B

  Version A

  This tool will expand the capacity of maximum scanning resolution and allow you to scan legal-size documents. Depending on your environment PC, the utility is available only in English, but will work with a PC configured or installed with a different language.

  1. Create a temporary directory on your drive HARD to save the downloaded file, for example C:\bront
  2. Start the download.
  3. Once the download is complete, double-click the downloaded file to extract it.
  4. Double-click the file "BrScUtil.exe".
  5. Select a WIA device, resolution and scan size and click on 'OK '.

  See you soon. Mick Murphy - Microsoft partner

• My new HDD is damaged, I would that the instructions to remove the hard drive and install windows 7, so I can later install windows 8.

  Hardware failure on the disk.  Installer installed new drive and put it on Vista.  I have corrupted data and can not download the service pack 1 upgrade to windows 8.  Can I erase the hard drive and buy a cd for windows 8.  If yes how I wipe the drive hard and etc.  Thanks in advance, baildaily

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-8000ffff-unable-to-fix-need-advise/597003cb-e5a7-4198-8ae6-36cafe876005

• How to install windows on the new drive?

  Hello

  I have a HP Pavilion dv7-3080, which came with Windows7. Now, I bought a 120 GB SSD. I tried to install Windows on the SSD by selecting Factory Reset. However, I get the message that the size of the hard drive has changed and that's why I can't use Factory Reset.

  Is there a way how can I use the Windows7 that came with my laptop and install this on my new drive!

  To my knowledge, I am not break everything right since Windows7 came with the laptop and was part of the price I paid for the laptop.

  Kind regards

  Sja785

  Hello:

  Partitions or recovery discs do not work on a smaller hard drive.

  You need to install a simplified version of windows 7 on your SSD. You will not break the laws or rules of license by using the product key on the bottom of the PC to activate the installation.

  However, if you can not read all 25 characters of the product key you are flat out of luck and will have to buy a new operating system.

  Here's how to make your own simple Windows 7 installation disc if you have not already.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down. I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  I lost the disc to my windows Vista 64 bit OEM System Builder, but; I have the audit validation info he writes down.  I need a new drive.

  EU the link below to download the ISO of Windows Vista. It's totally free.
  The site is Digital River. It is 100% legitimate. It is recognized and supported by Microsoft.

  The link also teach you how to burn the iso file on a bootable install DVD.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-Vista-official-ISO-download-links-Digital-River.aspx

  Although it says Dell at the top of the page, it applies to both Dell or other than Dell.

  Make sure that you select the correct version of bit.

  x 86 32-bit version =

  x 64 = 64-bit version.

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• HP Probook 470 G2: Recovery 8.1 of Windows on a new drive

  I have a HP Probook 470 G2. The original disk is fine, but I want to migrate to an SSD. I did a restore USB and replaced with a 120 GB SSD HD. It is much less than the size of the windows on the original disk partition so I don't see a problem with that.

  Having exchanged the disks and booted from the USB, I chose "reset windows" and everything seems to go well until 74% when I'm "there was a problem of resetting your PC", with an option to restart.

  I found a thread here where there are similar symptoms, but because I am using a new drive I don't think I can replace the drive in the middle of the recovery.

  I saw some videos on YouTube that show a HP Recovery Manager in Windows itself (which I don't have) or in the screens according to press F11, and I don't understand that either.

  I have to correct, then restart. Choice of troubleshooting, I get Refresh (does not work, because the disc is empty), refresh (arrives at 74% as I said) and advanced. Advanced led system, System Image recovery restore settings, Start Up repair, prompt command or UEFI firmware.

  As I have said that there is no HP recovery in Windows itself, I used a Windows procedure, but he said the HP Recovery disc in the middle of the construction so I assumed that he had built himself ok. It's driving me crazy now, should not it lasts migrate to a better record, but I have not found a conclusive answer via Google or HP pages where my post here.

  Any ideas? My position of strength, it's that I still have the HARD intact original disc so I did not burn bridges.

  OK, so you pouvez use a recovery USB disk to install on a smaller disk. It's just that something was wrong with my recovery USB drive. I have a friend (with the same laptop) to create a recovery on his drive and it worked.

• I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  I need to format the hard drive but don't have the windows vista disc to reinstall, but have had the key code that vista was preinstalled do I have to buy a new drive for vista

  Hello

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• try to install windows in a new driver and gave me the error code 0 x 80070017

  Original title: install windows in a new driver

  try to install windows in a new driver and gave me an error code 0 x 80070017 Windows vista the hd is brand new, what I am doing wrong

  Hello

  Here's how to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• How to uninstall & reinstall a printer driver (R146832) on Windows 7 (new) laptop computer?

  How to uninstall & reinstall a printer driver (R146832) on Windows 7 (new) laptop computer?

  Thank you, I have the same problem with a machine running xp and win 7.  I read where Vista users have also the same cursor jumping problem.  Where should I be to find help or answers.  is this a problem of office?

  You don't have the same problem/question.

  How a jumping cursor is linked to a printer driver problem?

  Transfer your question in your own Thread in the correct Forums:

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  .

  Mick Murphy - Microsoft partner

• Reference Dell touchpad driver updated for Windows 10 new gesture

  Hello

  A new major upgrade for Windows 10 has been released a few days ago, and the update included a new gesture that allow the user to pass the workstations with 4 fingers on the touchpad and slide between the left or right to switch workstations.

  This new gesture does not work on my touchpad and I guess this can refer to the current version of the touchpad driver is not yet supported in this function because other gestures as three finger swipe to move all open windows and three finger tap to call Cortana are always works well for me.

  I was wondering if there is no update for the driver for the touchpad to soon, or all those were just my own question...

  Thank you!

  CALVINLAU0914,

  Can you give us the model of the computer you have so that I can look for drivers?