New DVD burner

Similar Questions

• A new DVD burner for satellite pro 2100

  Ive got a satellite pro 2100 and I want to change the recorder to a dvd burner. is there a template I can get which will be a swap of right for in-house or will I need an external dvd burner? Thank you.

  HI Jamie,

  DVD writers usually come in two varieties, IDE usually designates those intended for 'slimline' and Office Tower systems which are generally mounted in laptops.

  The physical form of the player is usually constant models (in this case Toshiba use different brands in their notebooks). The device will have various plastic components fittings attached to it which will need tro be transferred to your new unit and have threaded metal accessories which are used to secure the unit to the laptop. These must also be transferred to the new unit.

  You also need device drivers dedicated to this new unit that can are provided on a CD or even be downloaded on the website of unit manufacturers.

  HTH

• Portege A100 - problems recognizing a new DVD burner

  Hello

  I'm looking to replace the Panasonic/Matsu * player UJDA750 combo with a LiteOn SOSW - 852S DVD burner. The LiteOn is CSEL and is not recognized by the Portege A100. I tried to change the master/slave/CSEL and Inverse CSEL using E2MS_WIN_SOSW - 852 S .exe (in an Acer Travelmate 220, which sees all configurations), but the Portege A100 still does not recognize LiteOn.

  I ran IDEDIAG using a WinME boot CD and the Matsu * a Combo drive in Portege reports as secondary master. So, I tried flashing the drive LiteOn (using the Acer Travelmate platform) with MTKFlash version 183 c using the a command? "mtkflash 3 w/b PRS9.bin" (using the original firmware of saved), '3' to change the drive to the secondary master. I came across problems here - the flash appears to hang. The drive is always ok, however. I flashed it back to the original ok CSEL using E2MS program in Acer.

  I have not tried bridging the pins 45 to 47 on the LiteOn - I thought maybe it was a last resort.
  -Can help you with the correct configuration for a CD/DVD drive in the Portege A100? There are a bunch of different ones - primary, secondary, tertiary, Quarternary master/slave and CSEL and Inverse CSEL. Portege A100 'sees' the Matsu * a CDROM model CR-176_B of Acer.

  Or - can you recommend me a DVD burner for this laptop?

  Hello

  The evolution of the master/slave/c-salt settings is not recommended and tell the truth I put t know if its possible. I presume that it of not possible to Flash these settings on medium power.
  In my opinion it doesn't make any sense to do.
  This procedure may damage the drive. Maybe you will not be able to use this drive more and more you will void the warranty!

  I think it s better to buy a compatible device and supported as trying to drive not compatible flash.

  Did you check your user manual? Usually the user manual should provide information on compatible CD/DVD players and supported.

  Good bye

• Dimension B110 does not recognize a new DVD burner

  Two years old B110 came with only a CD - RW (TSST). You just bought a new Philips 20 x SPD2413BDDVD - RW with DVD-RAM 12 x.

  

  I set the jumper slave and installed. He ran, but the sound was very agitated. I ran the Dell store and discovered that they use the Cable Select for optical drives.

  I changed the setting to CSEL, and he did not recognize the drive. I checked the BIOS settings and all discover the second IDE auto. Now it shows DRIVE UNKNOWN. Updated to the latest version of the BIOS, no change. Windows Explorer does not see the disk; Plug-and-Play finds him or the other.

  Tried to erase the NVRAM, checked to make sure that DMA is selected and tried to connect this drive only. Computer still does not see it. Any ideas?

  Thanks, man NRG

  
  

• New DVD - RW double layer burner on Satellite 2450-S203 (IDE 1 # ERROR)

  Hi all

  I have a toshiba 2450 S203.
  For this laptop, I bought a new writer NEC ND-6650 double layer DVD.
  I took out the orginal, unscrewed the chassis power off and place it on the new. Insert the new DVD burner in my computer, the led starts too burn. Insert a cd in there and nothing happened. Looked in my computer and the DVD player was not shown. Restart my computer and I got an erro: IDE 1 # ERROR. Can someone help me with this problem.

  Thanks in advance,

  Daniel

  Hello Niko

  Is it possible to make it work properly? My Tecra M1 has a CD burner. I wish I had a DVD burner inside.

  Thank you.

• installation of a new dvd in hp pavilion a730n burner

  My old dvd burner installed in these slick ide cables.  This new dvd burner has e-sata cables and said to connect on a direct x 9 sound card.  There is a card plugged into the motherboard but I don't think it's a sound card and there is no cable on this topic e-sata port.  I think my computer has an internal sound card?  I can see if a cluster of four e-sata ports of different color on the lower right corner of the motherboard.  One of the ports, the black has an e-sata cable that comes from a rectangular box at the front of the computer (hard drive?).  The other three ports are empty and different colors. Connect the cable e-sata burner dvd into one of these ports?  And if so, is it important what color?

  Thanks for any help, I'm not very computer literate.

  I found a post more soon similar to mine.  Looks like any e-sata port I plug.

  Thank you for this forum.

• What caused my DVD burner, to stop working

  OK, my main hard drive is SATA, if it is relevant to anyone who can help me that I don't know, but I'd rather just give too much information than not enough. I had to go and change my diet because he could not support my new DVD of LG Super Multi burner. Once I replaced it, it worked fine, I then a day later added a HDD IDE to put in shape, it did not work, I realized I should enable in my bios. I did, none of my devices would start and the computer would not go past the initial splash screen. I unplugged my hard drive and the computer starts correctly. now the hard drive does not work, I could care less because it's not as important to me as my NEW DVD burner. Also no power at all not going through my burner. I have plug into my diet and nothing happens. I fear he may have been fried somehow, but I don't know. I even tried other IDE cables on my power supply to power. nothing works! Please help me to find out why the * he decided to stop working completely. Thank you and excuse my language ^_^ didn't need to make the drive master/slave, like I said I don't like hard disk, he won. but the DVD burner is now completely insensitive. This is my problem, why she will not receive any power. It is a question, I want to do light, so keep in mind that I don't like hard disk, just my DVD ROM not working

  Hello

  I suggest you try to execute this fixit and see if it helps:
  http://support.Microsoft.com/kb/982116

  Also check out this link:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  It will be useful.

• DVD Burner problem

  I'm writing a DVD mastered with data. He is preparing to go, and then tells me "There was an error burning disc."  I then put in another disc and it never passes the validation errors entry screen. I bought another brand of DVD media and also a new DVD burner. I put the slow write speed as I can.

  Hello FarmBoy59,

  I suggest that you run the fixit by following the link below. This will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  If this does not work, I suggest that you follow the steps in the link below:

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Need help to replace my DVD burner in the Acer laptop

  Hello

  I have a laptop Acer (TravelMate 5720) running in very good condition I bought about 7 years back!

  However, the motor in the DVD player does not now - he is gone and must be replaced by a new DVD burner.

  When I checked on eBay to buy a new DVD burner for this model, there are 2 types sold either IDE (PATA) and SATA DVD burners. I don't know which of those above my laptop supports.

  I checked the properties of the CD drive in my computer and it says "hl-dt-st dvdram gsa-t40n ata device.

  How will I know which of the 2 above that you buy... ??

  Kindly help me. Let me know in case additional specifications are necessary on this you.

  -Mr. Abed

  You must remove the unit from your laptop. You will immediately see if it has an IDE or a SATA connector. See Wikipedia so not sure what these connectors look like.

• New DVD on Satellite M40-193 burner uses 100% of CPU

  Hello everyone,

  recently, I replaced my DVD burner with a new. My laptop is a Satellite M40-193 (PSM40E-06M026IT) and the original drive is a carpet * a UJ - 831B. I replaced it with a Sony-Nec Optiarc AD - 7633A because I like the slit in the feature and the Labelflash feature.

  Unfortunately, it's a problem. Whenever I use it, it will use 100% of CPU. I can't understand the problem. Is there anyone who can help me? It is a software or hardware problem?

  Thank you.

  Before we start the discussion please can you me if this optical disk drive is compatible with your laptop model? Did you even check this? Please be honest.

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.

  

• need help with nero kwik dvd burner to the top and running.new nget computer appreciate any help

  new computer, need help for nero dvd borning kwik place and ongoing, as if I wanted to get stuff for my grandchildren, any help really appreciated. Thank you

  http://www.Softpedia.com/get/portable-software/CD-DVD-tools/Windows-portable-applications-portable-AmoK-CD-DVD-burning.shtml

• CD/DVD burner with vantec enclosure iHas424Y refreshes new media

  Win 7 ultimate 64-bit

  I ordered a recorder of Y (optiarc rebadge) CD/DVD Lite-on iHAS424 and an external enclosure, VANTEC NST - 530S 2 and try to use them together (SATA to USB2).  Links:

  http://www.Newegg.com/product/product.aspx?item=N82E16817392021

  http://www.Newegg.com/product/product.aspx?item=N82E16827106335

  The drive burns without flaw, however, the player is a little funky.  CD works fine.  Full data and video DVD with small episodes of tv series (350 MB, xvid, 40 minutes) work well, most of the time.  Full movies (mkv, 1hr30min in 3 hours, 1 GB to 4.5gbin size) will work when the dvd is in the drive bay when starting and not deleted.  I can not put a new DVD in the Bay, it will not refresh dvd data and if he doesn't give me undefined error codec (regardless of the player).  Activities of dvd are able to explore freezing.

  At first I thought oh, funky speaker/reader.  But, everything works perfectly / fast when starting and running ubuntu 9.10 and 10.4 (direct copy of each, so no frills or special features).  Tried on several laptops / PC, as an attachment. Problem with the enclosure or the drive with win7 ultimate?  Or maybe a service is disabled?  I tried the fixit thing, didn't come with anything.  I tried an update to the latest (version zl1w).  Got the drive preinstalled on ultimate, driver could not find something for each speaker.  Not defeated cables (and works on the other OS / boot).

  Anyone have any ideas?  Or just incompatibility?  It just seems like a miss-communication between the pregnant reader (?) and windows 7.  I don't have a way to test the drive itself now (can't pop my laptop open, nor have I not a turn laying around).  Any comments would be greatly appreciated.

  For those who have similar problems, it is the service Detection hardware core.  Turn the power off and everything works perfectly.

• DISCS DVD BURNER / can I replace it with new grade DVR_RW and software up, which comes from withDRIVE

  Have more old Dell computer/Dimension 4500/P4 2.4gig / iGig Ram

  running WINDOWS XP PROFESSIONAL,

  ? He is working have new in the box of DVD burner/22XDVD + R writing speed.

  8.5 GB DVD + Double layer 16 x

  DVD_R 22 X / DVD + RW 8 X/DVD-RAM 12 X / 16 X/DVD-R DL 12 X DVD + DL? CD-R48x/CD-RW 32 x.

  Registration of NERO software (Nero Express in CD)

  CyberLink & playback software

  (PowerProducter, Power DVD)

  Process CONTROW PANEL? Remove sign dvd player / then turn off computer computer open remove old drive IDE cable

  and DVD player instal Moses / if the sound card has Digital Imput add a new cable of cable/ide audéo,.

  When starting in safe mode to remove any old player not yet deleted.

  computer restart lodge on add new hardware chect, should ask to reboot to complete. ?

  If it works? Feedback wellcom

  THANKS: 4ROB

  Hi 4ROB,

  You will be able to connect the DVD recorder and install the Nero app on it, but the reader must have the connector of the IDE cable instead of SATA cable connector as the Dell Dimension 4500 comes only with the IDE connector on the motherboard.

  Please respond to all queries.

• How can I burn a DVD from Encore CS6 on an external DVD burner to a new iMac?

  I am still appalled that the new iMac does not include a DVD slot so I bought an external DVD burner.  Then, I discovered that I need software Roxio Toast11 actually burn a disc of Encore CS6.  Still nothing.  What should I do with the new software to get a real DVD burned with video files?

  This thread continues this discussion...

  New Macbook Pro and Adobe still 5.1