installation of a new dvd in hp pavilion a730n burner

Similar Questions

• Pavilion 500-420nl: installation of a new GPU in HP Pavilion 500-420nl

  Hello everybody, basically, I bought a HP Pavilion 500-420nl PC and decided to improve a bit with a new power SUPPLY and GPU. The new PSU: Thermaltake Berlin 630W and the GPU is Sapphire R9 270 X double-X OC. The problem is that when I insert the GPU and connect the 2 connectors of 6 pins, I get only a black screen. There is no beeps, the fan runs but the screen remains black. I deleted the old GPU drivers and the new one is plugged correctly, but there is only a black screen. The motherboard should be compatible with the GPU, seeing that it has a PCI-E x 16 slot 3.0. What could be the problem?

  Hello

  Please see the following documents.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

• New DVD on Satellite M40-193 burner uses 100% of CPU

  Hello everyone,

  recently, I replaced my DVD burner with a new. My laptop is a Satellite M40-193 (PSM40E-06M026IT) and the original drive is a carpet * a UJ - 831B. I replaced it with a Sony-Nec Optiarc AD - 7633A because I like the slit in the feature and the Labelflash feature.

  Unfortunately, it's a problem. Whenever I use it, it will use 100% of CPU. I can't understand the problem. Is there anyone who can help me? It is a software or hardware problem?

  Thank you.

  Before we start the discussion please can you me if this optical disk drive is compatible with your laptop model? Did you even check this? Please be honest.

• drive DVD/cd that came with the computer failed. you want to install two new dvd/cd players.

  Pavilion p7-1054 pc, windows 7.  I installed a new dvd/cd drive (hp dvd1260i).  works perfectly.  you want to install a second drive of cd in expansion Bay.  I don't see sata cables extra or riders on the new dvd/cd drive (hp dvd1260i).

  a power cable.  everything works fine. thenk you very much.

• Clean install of an installation of Lenovo. DVD: UEFI vs Legacy + installation according to Lenovo Thinkpad user Guide

  Machine: T520 purchased February 2012

  O.S. W ~ 7 Pro 64-bit

  I want to wipe the hard drive, buy a Lenovo W ~ 7 DVD installation of PRO and make a completely clean install.

  The user guide for Lenovo (.pdf), Ch. 8, Adv Config, installation Windows 7, p. 295 (298 212) said:

  Start the installation of Thinkpad, choose UEFI against Legacy, and then insert the installation DVD.

  This of course does not apply when the hard drive has already been erased (required to 100% remove all traces of damage caused by a virus, including the recovery partition (Q-drive).

  When an intallation DVD is purchased from Lenovo, is not the first step to insert the DVD? Then there is probably a resulting install wizard an O.S. restored?

  If this isn't the case, please tell me what are the surprises in store, and where I can find a reliable resource to consult written!

  Thank you.

  Hi, Z

  Sorry, but I'm not all-new advanced in the understanding of the apparent contradictions, or how to proceed.

  It is not the case in this case that the Lenovo User Guide is referring to one of several types of clean install, and that he has no idea the other methods?

  If my first step to reinstall the version of Lenovo's W ~ Pro 7 is to use a 3 rd-party app to remove completely all the files from the hard drive, how do I then perform any action before inserting a facility provided by Lenovo dvd? I know that the BIOS software is separated from Windows, but it's still there? Alternatively, is the User Guide of Lenovo referring to a situation in which a first is not a so-called "hard drive wiping" before to start a clean reinstall? In addition, if a wipe everything first or not, is the guide referring to an installation of Microsoft (generic) dvd and not wearing only not on a Lenovo purchase? I think that an installation DVD purchased from Lenovo back on my computer, exactly what was there before and ask me not to make decisions as the UEFI against Legacy (in fact, the words "UEFI" and "Legacy" are not yet in any computer on my computer profile file.

  On the other hand, if the L ~ the User Guide instructions apply in fact to a hard drive wiped, the Guide says absolutely nothing about what criteria to use to make this 'choice' between UEFI 64-bit and 64-bit legacy.

  (When the Lenovo user guide instructions raise more questions than the original question, then these instructions are worse than no instructions at all!)

• Windows 7 serial key is integrated in the new DVD of restoration?

  Hello!

  I set up my laptop, but the key of Win 7 is not readable...

  Is the key in restoring integrated image or do I have to indicate the same as a 'normal '?

  Is the key integrated if I order the new DVD of restoration?

  Thank you!

  The recovery disk contains the image of Toshiba and this image Windows 7, drivers and other software. Windows 7 is already enabled and requires no serial key.

• Re: New DVD player is not recognized - Satellite 5200 801

  The old DVD drive no longer works, so I bought a new DVD player (SonyNEC Optiarc AD - 7593A).
  But the system does not recognize the new drive at all.

  I can not boot from the CD and in the hardwaremanager, there is no CD/DVD.

  But the drive works. If I put a CD in, you can hear how he turns upward.
  If I put the old drive, it is recognized in the hardwaremanager, but the reader no longer works.

  Any ideas?

  Thank you
  FO

  > But the drive works. If I put a CD in, you can hear how he turns upward.

  It says nothing! You can hear the rotating disc because it s connected to the laptop and it s operated.

  The BIOS is important! Your new CD/DVD drive is recognized in the BIOS?

  If not, then you have purchased NOT compatible CD/DVD player!

  I think that the master/slave/c-salt settings are not compatible with the laptop and so the CD/DVD drive may not be recognized.

• 1800 514 does not start with the new dvd/CD-RW drive

  My old dvd - rom on my toshiba s1800-514 drive was broken, so I had to replace it. I used an old teac as a temporary replacement cd-rom drive. but now, I bought a new dvd/CD-RW-drive combo (toshiba sd-r2612). but the laptop does not seem to post, I get the "toshiba" screen (when it says press f12 to select boot device). but it stops there and does nothing. I can open the player, it seems to be connected ok.

  Why won't it work? (only the bios setting which applies is one that I can't change...). the drive is nine ar so small chance it's already broken.

  What should do?

  Hello

  A few weeks ago one of my friends also had a problem with his replacement new drive. He wanted to move the DVD/CD player to a DVD burner.

  The only thing he had to do was change the master/slave settings!

  Goodbye Chris

• New DVD - RW double layer burner on Satellite 2450-S203 (IDE 1 # ERROR)

  Hi all

  I have a toshiba 2450 S203.
  For this laptop, I bought a new writer NEC ND-6650 double layer DVD.
  I took out the orginal, unscrewed the chassis power off and place it on the new. Insert the new DVD burner in my computer, the led starts too burn. Insert a cd in there and nothing happened. Looked in my computer and the DVD player was not shown. Restart my computer and I got an erro: IDE 1 # ERROR. Can someone help me with this problem.

  Thanks in advance,

  Daniel

  Hello Niko

  Is it possible to make it work properly? My Tecra M1 has a CD burner. I wish I had a DVD burner inside.

  Thank you.

• Download osx dvd installation and applications install dvd for free?

  I intend to remove the hard drive on my mac mini mid 2010 and I'm not quite sure my dvd osx installation works. My installation of applications that DVD does not work. Is it possible to download free copies? Best regards

  N °

  (137046)

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.

  

• I get a region code error when I try to play a new DVD

  I just bought a new DVD of the store, and I get a region code error message.  Laptop computer wants me to change the region code before I can read the DVD.

  Regardless of your operating system go to Device Manager, go to the CD/DVD drives, click the sign more or pointer, right click on the line that appears and click Properties, then go to the region of the DVD tab.

  Now, you have the choice to make, you will see changes remaining X, the value must be 4 if it has not been changed before, if you change you will need to change it back - 3-2, if you get to 0, you're stuck in this region!

  If the specified region is yours then I would take the rear DVD, if the region is other than your, you have the choice above then you must indicate other PC users.

• name the new dvd

  When I put in a new DVD the computer automatically gives the new DVD of emptiness, a strange name with Chinese characters. I rename the new DVD, but is it possible to automatically find a blank for the name row or perhaps the date?

  It is usually a function/option of the burning in use software.

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway

• After new XP installed the computer sees my old CD Drive not my new DVD drive

  After new XP installed the computer sees my old CD Drive not my new DVD player.   My newest DVD burner was in the computer before I did the reformat and install again, but for some reason any my old CD player shows. He is no longer in the machine!

  Yes, I did what the measurements LITEON told me to do and I work like a dream! I went to do computer right click, click on manage, click on Device Manager, click on CD-ROM/DVD-ROM, double on this box, click on DVD region, mine had an empty box, I sailed to USA clicked OK, did a restart AND IT WORKS LIKE a DREAM!     I hope that the foregoing will help someone else!     Thanks for your time!

  Carrmas dad