New environment (passage of the Hyper-V) - Q p410i Raid

Similar Questions

• New environment: URL expirations, the failures of Configuration, connection of Regional service failures

  We are our 9.3.1 material migration environment. We completely changed our Essbase, EAS, planning, Reporting, Shared Services at the latest and plates (Essbase 9.3.1.6, EAS 9.3.1.5, planning 9.3.1.3, SS 9.3.1.1, Reporting 9.3.1.3)
  
  We are in a development environment and "anything goes", but we find that pulling up shared Services, planning URLS, the Web console for the Regional service are stopwatch. We receive errors of time-out during the configuration utilities. Services on a server (e.g. shared services) take more than 4 minutes to "recognized".
  
  Also using esscmd, we did order createapp that it takes more than 15 minutes to complete.
  
  Could the MSAD Shared Services setting (we use MSAD to our users, our groups are indigenous) cause delays? By examining several files there is a timeout in css.xml that refers to an external MSAD server that is not in the field of the development of newspapers.
  
  Just look for avenues/ideas/newspapers check...
  
  Thank you
  
  JTS

  I guess it would be more related to HSS > MSAD on a side of essbase, it would be a shock to see the issue lying with essbase, if an application takes 15 minutes to create.

  Is it when even chance you could disable the MSAD in the configuration of shared services, at least that would give a clearer indication if it is a MSAD question.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error 401 during the passage of the assessment of the production environment

  Hello

  We recently moved our application for assessment of the production environment by using the credentials provided by the Push of BB Services, only to find out that we receive an "HTTP 401 - PushServiceId/password status invalid in the authorization HTTP header" whenever we try to send a push notification.

  We do not have change our code (which works very well using assessment data) at all except for his replacement by credentials. We use the URL https://cpxxx.pushapi.na.blackberry.com/mss/PD_pushRequest to send our push notifications, where xxx is the CPID provided by BlackBerry, and we're certainly using the password for the initiator to push (instead of the password for the portal content provider).

  Needless to say that we are base64 encoding app id and the password in the header, and as I said if switch back us to the environment assessment (change credentials), everything works fine.

  This becomes a problem, I would appreciate help if someone was faced with a similar problem.

  That's all. He works with the new credentials.

  Thank you.

• Classic report shows wrong "could not parse the SQL query: ORA-00942" error after migrating app to the new environment

  After migrating my APEX 4.1 application to a new environment, one classic report displays a "cannot parse the SQL query: ORA-00942: table or view does not exist" error when the page is displayed. Change the region to report SQL source to somehow (e.g., remove spaces, changing the order of the variables in the WHERE clause) immediately solves the problem, but by returning to the source of the region causes the report error again (the source region valid code without error, however).

  Throw the error message:

  Select v.id,

  v.Col1

  of view_vw v

  where (: P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Do not throw error:

  Select v.id,

  v.Col1

  of view_vw v

  where (:P1_FILTER is null or)

  v.col2 = :P1_FILTER)

  Changing the order of column in the report has the same effect; i.e. He arranges, but return back to the original column order causes the error to display.

  It's as if a cached result for the correct select statement used by the report is displayed. However, the application does not use the caching of page/region. Any ideas of what could be the cause?

  He solved. Ultimately, all that was necessary was to clear the DB cache using:

  alter system flush shared_pool;

• migration of user to the new environment of horizon profile view

  Hello, we have a new environment of horizon view during the installation of hardware new and ready to go

  at the moment we saw 5.1 in production. 5.1 environment is configured with dedicated workstations + user data disks. the windows profile is redirected to the user data disk. We also have records of the location of desktop and my documents redirection to a cifs share.

  We must abandon our users to the new environment with minimum disruption of our EBU end (IE not re - create profiles). We also want to integrate the management of persona in the new environment of horizon view.

  no indication on how to better accomplish the migration would be greatly appreciated.

  Thanks in advance.

  -charlie

  With regard to the use of Windows and persona profiles that should be pretty simple migration.  I had a similar situation, and the first thing I would do is to configure persona in your GPOS.  You can use the existing path or create a new path in there is an option for "Override Active Directory chemin_profil_utilisateur if it is set."   Alternatively, you can make the folder redirection with persona at the same location. Again, I would set up your GPOS with the same settings you use for roaming profiles and folder redirection, then remove the old GPO and implement the new persona profiles.  I've lived without interruption of service, but you may need to do a global gpupdate/force on the clients.

• Problems opening existing Oracle 9i in the new environment of 11g

  Hello world
  
  I have a challenge for you! Just to be clear, I am not a specialist of the Oracle (or call me a noob Oracle).
  
  Challenge: Open an Oracle 9i database in a new Oracle 11 g environment.
  
  Result: Be able to connect to an Oracle database running with "SSMA for Oracle" to convert it to a SQL database.
  
  Starting point:
  -Receipt of the customer: DBF, CTL and logs of an Oracle environment existing.
  -Since I can't download Oracle 9i environment, I chose to install 11g environment and hope for a good backward compatibility.
  
  How I got:
  -Installed 11g environment
  -Set up a database pointing to the files DBF
  ~ Change init.ora to use CTL files
  ~ Create init.ora spfile
  ~ Start database mount and rename the database and data files using sqlplus (liaison with "sys as sysdba")
  
  Questions:
  Now I can start the database, but sometimes with a * "ORA-00704: bootstrap process failure" * and recommend I start it with the UPGRADE option. "» Start with UPGRADE option works and I can navigate through the database using Toad tool (login 'as sysdba'). But 'SSMA for Oracle' is not an option to connect 'as sysdba' and gives me a "ORA-39710: only connect AS SYSDBA is allowed when it is OPENED in UPGRADE mode.
  
  Since the MASA for customer Oracle cannot connect to a database started with the UPGRADE option I probably have to fix the "ORA-00704: bootstrap process failure»
  I tried to avoid the upgrade option in trying to upgrade the database to 11g. But utlu112i.sql and catalog.sql give me errors like "ORA-04023: object SYS." STANDARD cannot be validated. "
  
  Issues related to the:
  -Do you think I want to achieve is possible at all?
  -Can I easily run an Oracle 9i database in a 11g environment or what I really need to upgrade?
  -Do you think it is the best way to get an Oracle existing database running in a new environment?
  -If Yes: how to solve the error ORA-00704?
  
  If you need more information, alert logs, files .ora or anything to give an appropriate response, please ask and I'll give them.
  
  Thanks in advance!
  
  Kind regards
  
  DirCo

  Hello

  9i binaries are no more on the website of oracle since this version is located in the long ago.

  What I would do (since you have your files backed up somewhere, at least I hope) is simply:
  Set oracle_sid = xxx
  sqlplus/nolog
  Connect / as sysdba
  start upgrade
  @?\rdbms\admin\catupgrd.sql (to upgrade the database)
  @?\rdbms\admin\utlrp.sql (to compile the modules)

  Wait a while (2-3 hours)

  immediate stop
  startup

  Check no errors in alert_log and you have access to your data.

  Then 2 possibilities:

  It worked - so everything goes well for you.
  It does not, replace your original files and try something else.

  I think this will work if, as we have already said, you're 9.2.0.4 or more.

  Do not lose time on futile questions such as 'what is really the version of my files. You care, upgrade script works for all of the above versions 9.2.0.4.

  Don't forget that:
  Passwords are now (11g) case sensitive (but you can change them when logged in sysdba)
  Some pl/sql will not compile, but I think that you are mainly interested in the data.

  I hope this helps.

  Christian COMMARMOND

• How to move Oracle APPS 12 configuration data to the new environment of production of 12 APPS

  Dear all
  
  I need to know, how we can move from Oracle APPS 12 configuration data to the new environment of production of 12 APPS? What is the safe and easy way, we do not want to make the new facility of 12 APPS and reinstalling things...
  
  see you soon

  Hello

  The scenario above is correct and should work fine. Make sure that the central source and instances of the target are the same patch upgraded.

  Kind regards
  Hussein

• New chassis ucs to the existing environment

  Hello

  I connect second ucs chassis to an interconnection fabric. How to copy a profile of 1e-2e chassis service

  and is the Director of the ucs need license

  and there at - it best practices to this new chassis

  Thank you

  Hythim,

  Are these two chassis in the same field? (Under the same cluster IP address?) If so, you can simply create new profiles Service among the models. If they are in two different areas, Yes, copy XML or just re - create the template in the new domain would probably be easier.

  If you have central UCS, you could join the two areas to the Central and use Service Global profiles and all together to avoid the problem.

  HTH,

  Wes

• Competitor not starting not not to DR after passage in the

  Hello

  We have successfully configured recovery disaster for 11i ebs on windows environment.

  Redo log shipping and applying normally and its working fine.

  After the passage of the primary on the eve, we synchronized with the new primary database application services.

  But while watching the concurrent managers, we are facing questions.

  In the concurrent Manager log as its display error

  Could not contact Service Manager FNDSM_ORACLEAP_HRDR. The TNS alias could not be located, the listening on ORACLEAP process could not be contacted or the listener cannot generate the process from the Service Manager.

  Could not contact Service Manager FNDSM_ORACLEAP_HRDR. The TNS alias could not be located, the listening on ORACLEDB process could not be contacted or the listener cannot generate the process from the Service Manager.

  We have made the steps below but make even persistent.

  (1) connect apps/primaryapps

  (2) exec FND_CONC_CLONE. SETUP_CLEAN;

  (3) validation;

  (4) run cmclean.sql

  (5) run on nodes DB, CM & WEB autoconfig.

  (6) run @%FND_TOP%\patch\115\sql\afdcm037.sql sccripts also.

  (7) we have correct host entries in the system hosts file.

  Kindly help me to solve this problem.

  
  

  Thanks and greetings

  Villi Kumar

  Hello

  The problem is solved now concurrent Manager is up and running after the digital switchover.

  Solution:

  After the passage of the database:

  ------------------------------------------

  Complete the Configuration of database:

  ----------------------------------------

  connect the apps/primaryapps

  SQL > exec fnd_net_services.remove_system ('HRDR');

  SQL > commit;

  SQL > exec fnd_conc_clone.setup_clean;

  run the automatic configuration on db

  lsnrctl stop STHRDR

  lsnrctl start STHRDR

  Synchronization of the application:

  -------------------------------

  disable the listener applcaiton both on the odes before running the automatic configuration.

  Run the autoconfiguration on cm node service

  Run the autoconfig on the node of the Web

  Check the node values using query below:

  ----------------------------------------------------

  Select nodeName in fnd_nodes;

  Select CONCURRENT_QUEUE_NAME from FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM'; ---> to the result of the query, for me web node hostname only came so I ran script below.

  @%FND_TOP%\patch\115\sql\afdcm037.sql ---> this script updates the table with the details of the cm node

  now, it seems very well.

  Select CONCURRENT_QUEUE_NAME in the FND_CONCURRENT_QUEUES where CONCURRENT_QUEUE_NAME like '% FNDSM ';

  Then restart all servers.

  Now start the database and applications.

  Problem will solve itself.

  Concerning

  Villi Kumar

• H9-1350 impossible to activate the Hyper-V technology

  I just bought a new Phoenix h9-1350 HP Envy, running under Windows 8 64-bit on i7-3770. I want to activate the Hyper-V technology. I have looked at the BIOS settings and cannot see an option for Data Execution Prevention. According to other threads like this one to another desire with the same motherboard, it should be in respect of the security of the system. But all I see is the option for virtualization.

  Does anyone know if there is another way to turn on DEP? Do I need a BIOS update? The version I see is FOR_814.ROM V8.14

  TIA

  Hello

  You must run Windows 8 Pro and VT must be enabled in the bios.  Go to the Control Panel - programs and features, and then click Windows features turn on or off.  Check Hyper-V as it is not defined by default.  See the image below.

  

  Click OK, and then restart.

• I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  I tried to install 300 photos on a USB I installed and come with an Ox80070052 error message. Please advis how can I install the rest of the photos without the passage of the error.

  Hello BrendaMay,

  ·         What exactly do you mean by saying that you install photos?

  ·         You try to copy photos from your computer to the USB key?

  Try to format the hard disk to the NTFS Format USB and check if you can copy the photos.

  If does not work, try to format to FAT32.
  1. type devicemgmt.msc in the Vista Start menu or in the Run dialog box.

  2 expand disk drives, right-click on your USB key that you want to format it in NTFS file system, and then select Properties.

  3. on the Policy tab, select optimize for performance option. Click OK and return to my computer.

  4. right click on your key USB. Select Format.

  5. Select NTFS from the drop-down list (you can also select FAT32).

  6. click on apply to format your drive to NTFS.

  Note: The pilot of formatting will destroy all data on the disk.

  If this does not work, try to create a new folder in the drive, and then copy the photos on this folder.

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• HP LaserJet Enterprise 600 m602 slow printing during the passage of the trays

  Hello world!

  On the HP LaserJet Enterprise 600 m602, who met breaks in print jobs during the passage of the trays?  Example, we are going to print invoices and we have a rule configuration that prints on plate 2 with the exception of the last page that is perforated paper tray 3.  So, in a job of 5 pages, pages 1-4 are the tray 2 paper... then page 5 is perforated tray 3.  There is a 2 to 3 seconds when the last page is extracted from tray 3.  If the invoice is only 2 pages, the print job appears super slow.

  This printer was working fine with no delay until we applied the firmware 2302786_433718.  Now, the delay is very noticeable.  We do not know if it was intentional or not in the new firmware.

  We use the latest PCL 5 Universal Print Driver.  The only thing that has changed is the firmware.  We even tried a full reset of firmware.  Problem is still there.

  I worked with HP support, but we were told to wait... the next version of firmware that may or may not fix everything.

  Any help or insight is appreciated.

  We have this same problem with our printer HP Laserjet 600 M602.

  Could solve by setting the Print Mode to all papertypes that are used for the same parameter.  We thought initially can be a problem, issue or firmware of the Board of adjustment, but in reality was the paper type settings. We set up printer for ordinary paper into tray 2 and tray 3, default regular bond has been set at light mode printing and binding for the print mode binding. Each time dial-up printer and trays, he stops to configure different paper type settings.

  Hopefully the other help solve their printing problems

  Enjoy your day,

• How to store values by default when a work of recognition processor creates a new document due to the separator page?

  Environment : business Capture 11.1.1.8.0

  Question : How do I keep the default values when a work of recognition processor creates a new document due to the separator page?

  Background :

  1. we have a job to import processor.

  2 failing a metadata to the sender of the email message ID value.

  3 work as expected if it is a single document, with no separator.

  4 but when it is to have several documents with a separator page, My Job of recognition is split into several documents.

  5. in the present case, I am losing by default (SenderEmailId) to all documents created by split.

  In this regard, any help is appreciated.

  MetaLink article describing almost word for Word the question shown here.

  "Sample company Capture recognition processor Script to keep the existing metadata for new Documents (Doc, ID 1918874.1).

• How to get the Hyper-V feature turned on in VMware Workstation VM?

  I think it's possible, but I can't find the corresponding thread more.

  Can someone enlighten me please on how I can enable the Hyper-V feature in a VMware Workstation VM?

  I know that it is not supported. But come with the new Microsoft Visual Studio 2015 there will be only a bundled Android emulator which seems to demand of Hyper-V.

  In my view, that nested VMs running is what you are looking for.

  André

  Note: Discussion left VMware Workstation for nested virtualization

• Issue of SDRS to vCloud Director after you add the new data store to the Cluster of DTS

  Hi people,

  We use vCloud Director 5.5 in a vSphere full 5.5 environment.

  We have several DTS Cluster in vSphere and connected to vCloud Director.

  Following problem.

  When I add a data store to a Cluster of DTS and connect this to the corresponding storage profile data store, the storage profile is not available to vCloud Director more.

  After removing the new store data in the cluster of DTS, the profile becomes available again.

  Any ideas?

  Concerning

  Jean

  How did you the storage profile associated with the data store?  via c# client or vSphere web client?

  If you did the wrong way (c#) there no storage class label appropriate against it.

  A data cluster store has the storage class who would have all preparations of data contained inside.

  I think that you should check the service class is associated properly in vSphere web client (before adding to the DS Cluster).  Once it displays correctly, and then add the data store to the cluster.