New hard drive IBM T61p

Similar Questions

• HDD problem IBM Thinkpad T42. I can't install NEW Hard Drive and NEW OEM Windows XP?

  Hi all

  When I turn on the notebook Windows XP starts up and everything is loaded. But after 5 or 10 minutes, the response is very slow. If I click on any window and try to open any folder, or open internet explore it takes about 1 or 2 minutes to respond. I tried several ways to scan disk and Defrag, but still that are of no use. I also tried 'Difficulty automatically File System Errors' and ' will search for and attempt recovery of bad sectors ", but this problem is still there. Even when I stop it takes too long to stop about 15 to 20 minutes.

  When I turn on again NEXT DAY Windows XP starts and everything loads quickly. After 5 or 10 minutes, the response is very slow. This problem occurs for a few days.

  I then used "IBM Rescue and Restore" to load fresh operating system. Still the problem does not get fixed.

  Can you get it someone please let me know if this is problem of hard disk or something else. I'm guessing it's related to the hard drive.

  If it is the drive hard problem how to save (clone) of this old hard drive AGAIN DISK (after buying) HARD.

  If I buy the NEW HARD DRIVE and CD/DVD of NEW OPERATING SYSTEM OEM VERSION it will work? Do existing mother board ALLOW to load a NEW VERSION of OS OEM?

  Thank you

  Contact the manufacturer of your computer, IBM and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  Buy a new hard drive > Reinstall.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Portege 3500: OS crashes after the new HARD drive update

  I have a problem with the new hard drive - Seagate Momentus 100 GB 7200 rpm, ATA - and...
  instalator blue screen starts normally (from recovery CD or OEM CD) and when partitioning is startis - system is stopped...

  HARD drive is ok - tested on another laptop
  Laptop is ok? instalator and works windows, tested on 2 HDD (40 and 60 GB, two IBM)

  It is possible, that this new hard drive is not compatybille with this laptop?

  Please help, because it's my boss laptop :(

  P.S. - sorry for peut English

  Hello

  Are you sure that the HARD drive is recognized correctly in the BIOS?
  Seems that the laptop does not support the new drive (100 GB, 7200 RPM).

  Perhaps because of the large size of HARD drive and the fast rotation value.
  I would try to use a 60GB 5400 RPM a 80 GB HARD drive maybe works but it seems that the 100 GB HARD drive is not compatible

• New hard drive in Inspiron 5000e has failed, NTLDR

  HELLO community,

  I have an Inspiron 5000e (2001) and to replace the old hard drive (IBM Travelmate 10 GB) against a new, a Seagate Ultra ATA (80 GB).

  I partitioned the new drive HARD, C with Fat32 (30 GB), D with NTFS (47 GB).

  Then I had to run Fdisk from a floppy, the computer could identify them.

  On C, I had Windows ME (German version) a success, but the Grafic driver was missing, and I couldn't see D more.

  When I tried to put Windows XP (English version) on D, an error message came during the installation process: "NTLDR is missing". Plant was shut down.  Y at - there anyprogram to put that right on the hard disk during the installation process?

  Also after that, C not more also began.

  What I will do, to bring at least Windows XP on a partition, it is able to securely access internet and normal working office?

  Thanks for any help,

  Jens

  
  

• new hard drive G41, factory restored, now stuck to always start at R & R

  G41 2886-79U with XP Pro.  Hard drive died last year, still under warranty then took to an IBM service center.  They have replaced the hard drive under warranty and gave me a set of R & R and product recovery CD.  Laptop computer R & RL ran OK for about a month.  He started to be right about the time when my warranty has expired, becoming slow example, 45 minutes to start.  Random crashes, most often when closing programs, the error message this program could not write to the hard disk.  Frequency of accident back.

  Abandoned, taken from the hard drive to install a new hard drive.  [Hmmmm, I notice that they in fact did not replace my original with a new drive, this drive warranty-replaced has a sticker saying "Good used State party"].

  Installed the new HD, started using the CD R & R, then followed the six guests R & R factory restore since the product recovery CD.  After the sixth disc, message box saying it needs to restart the PC, you click Yes or no.  There is no direction to remove the CD from the drive, at this point.

  It restarts at the R & R window, with the popup of restore factory warning that the product recovery program is only for the unrecoverable system problems.  This looks at where we started the process of factory restore, there are seven CDs.  Choices here are OK, Cancel, or help.  Clicking OK brings you back at the beginning of the factory restore procedure.  Cancel on your vacuum on the main R & R screen. By clicking on restart here restarts once again to the screen of Rescue and Recovery.

  Now the G41 is stuck, still boots to R R & does not start in XP.

  I pulled the HD and installed temporarily in another PC that has a floppy drive, this allowed me to start with Partition Magic.

  R & R 3 partitions on the new disk as follows:

  1. the label is IBMPSP, Type FAT32, size = 406 MB, used (s) = 290,4 Mb, status = None, Pri/Log = primary.

  2 no label, Type unallocated =, size = Mo 71738,8, used (s) = 0.0 MB, status = None, Pri/Log = primary.

  3 no label, Type unallocated =, size = Mo 4171,3, used (s) = 0.0 MB, status = Active, Pri/Log = primary.

  On this PC, I let him try to boot from the hard drive and got the message "Missing Operating System".

  I put it in the G41, it starts at IBM Rescue and Recovery as before.

  I've searched the web and this forum looking for this same issue, have not found something exactly like this.

  If anybody out there knows how to get a new HD to market, let me know.

  Thank you, Don.  I found the idea on another forum of Lenovo.  So far things are working OK.  The other hard drive will be float-tested as soon as I do not know there is nothing on it that I still need.

  As the professor said, it's just not intuitively obvious to the casual observer.

  A note, when the PC was bought, it came with Norton Antivirus installed, long expired.  After the factory restore, the Nortonware registered with the site of Norton and apparently it has been recognized as a new installation and got the last update.

• My MacBook Pro was built in mid-2009, I understand that I won't be able to get the next Sierra of OS.  I just put a new hard drive 700 GB, more I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars. What I need to by

  My MacBook Pro was built in mid-2009, a 2.6 GHz, 13-inch, I just put a new hard drive 700 GB and I added a new battery to include a new CD/DVD drive.  I spent more than 400 million dollars.

  I understand that I won't be able to get the next Sierra of OS. I need to by a new Mac?

  Talk to the people the more I would get if I turn in I'd get is about are about $ 100 million.  Please tell me it isn't so.

  If you want Siera you will need a new Mac, but you can continue to use the old one as long as you want.

• Cannot copy old backup on new hard drive

  I can't copy my old backup to a new hard drive directory by dragging the old new th diving in such Finder recommended by Apple.  There seems to be some controversy about how to accomplish this task.  Instructions would be appreciated.

  Did you follow the following steps:

  https://support.Apple.com/en-GB/HT202380

  to the letter? If so, what was the error message?

  C.

• new hard drive, how to reinstall OS x

  I have a new hard drive after a crash of the former. How can I install OSX top?

  You should be able to boot the Mac using recovery Internet if you updated the firmware to enable.

  OS X: on OS X Recovery - Apple Support

  If you don't have to update the Firmware to allow it to use the Internet in recovery, you need to use the installation provided with the Mac DVD.

  Either way, you start the Mac.

  Open disk utility and format the drive under OS X Extended journaled.

  Then, quit disk utility and reinstall OS X.

  Who will install the operating system on the Mac (likely Lion).

  You can then improve it to El Capitan.

  If you have a Time Machine backup, you can restore it in recovery from the Internet instead of reinstalling the operating system.

• Old favourites (nqa1hp6f.default) registered. New hard drive, new FFox 06/08/13 to W - 7. New bookmarks (?) (qlqx1k82.default). how to load the old b-brands?

  My question is similar to the previous, BUT I don't HAVE my old file of saved bookmarks (nqa1hp6f.default). My old hard drive crashed and now have the new Firefox on new hard drive with Windows 7. New firefox bookmark name (August 6, 2013) seems to be (qlqx1k82.default), but not sure. Is there an easy way to put all of my old favourites in new file of firefox?

  See also:

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• New hard drive backup restore

  I installed a new hard drive after backing up my old one (Snow Leopard) on Time Machine. I can't understand how to restore the backup to the new hard drive.

  First install the OS on the new drive.

  During the installation process (or just after, I forget exactly), it will offer you the possibility to configure the machine based on a Time Machine backup. Point it at your TM drive and come back in the morning (it will take a long time).

• I changed the hard drive, how do I put on an operating system on the new hard drive

  I changed the hard drive, how do I put on an operating system on the new hard drive

  Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

  Follow the prompts on the screen.

  (142198)

• Copy a project and media for the new hard drive

  Greetings,

  I have a very large project stored on an external hard drive and would like to copy the whole thing, including the original media linked to a new hard drive... because I'm afraid that my old one may cease to operate quickly. How can I go on the copy of my project to a new hard disc as well that all sounds, music and video are related?

  Thanks for your help.

  Hello.

  You can create a library of transfer in the user interface and move the top project. (It it will copy as you move it to a new drive)

  If you also move the media, it will break the links between the project and the media (audio and video). When you do that, use the command create a link (on the file menu). If you point to the good volume, it should find the media and offer you the ability to link again.

  Good luck.

  Russ

• HARD drive failure. You want to transfer the passwords to new HARD drive. If it is located. I don't remember the last time.

  HARD drive wasn't in my other computer. Put in a new HARD drive and transferred the bookmarks (FFox. (++ 16 on both), but do not remember how to transfer my saved passwords. Some people have helped me with this when I rebuilt this PC (the one that I use to send this info) and I remember most of the way and the method, but not well enough to attempt it without some guidance.
  The other PC is a laptop ASUS G50VT - X 5.

  XP:

  • C:\Documents and Settings\ < user > < profile > \Application Data\Mozilla\Firefox\Profiles\.

  Vista/Windows 7:

  • C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.

  Windows: %AppData%\Mozilla\Firefox\Profiles\ < profile >.

  The "Application Data" in XP/Win2K folder and the folder "AppData" in Windows Vista and later versions of Windows 7 + are hidden folders.

  • http://KB.mozillazine.org/Show_hidden_files_and_folders

  For passwords, you must the signons.sqlite and signons3.txt file.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• How to recharge my hard drive with photos that are stored in iCloud.  After installing a new hard drive, there's no pictures found in the Photos, and I get this error "cannot find system Photo library named"Library.photoslibrary Photos".

  How to recharge my hard drive with photos that are stored in iCloud?  After installing a new hard drive, there's no pictures found in the Photos, and I get this error, "could not find the picture of system library named"Library.photoslibrary Photos".

  Soon as your App Photos or iPhoto lost track of your photo library, or there has not been migrated from your old drive. You can create an empty library and probably enable iCloud photo library for photos to upload to the cloud.

  Designate a library in pictures - Apple Support System