new hard drive mounted recently in my pc...

Similar Questions

• New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  VAIO laptop

  New hard drive mounted, didn't save lost all devices sony and Microsoft word. Still have the product that was supplied with the laptop key. Can I get this without having to buy new?

  To restore the software preinstalled on the computer, or to install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

  Sony support:
  http://eSupport.Sony.com/

• New hard drive mounted on my iMac, lightroom 5 was not saved, how can I reinstall

  IMac 27 "had the hard drive replaced at the Apple Store - unfortunately I did not support it up - how can I reinstall without having to buy another copy?

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• New hard drive - new windows 7?

  My HDD recently crashed, I could not find one of my original system comes with the laptop drives and could not solve the problem.

  So I got a new hard drive mounted, do I have to buy a new copy of windows 7 or is it possible that I can get it installed free because this is not a new machine just a new hard drive.
  I can't go back to the shop I bought because it was the Comet which have since closed.
  Help, please.

  If you still have your product key download Windows 7 proper. ISO file that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• I recently installed a new disk of hard on my laptop, is there a way I can still use my OS to a new hard drive? pls help

  I recently installed a new hard drive on my laptop, and Ive had an activation problem my windows 7 OS, it says that I cannot activate my OS on this machine, is it possible that I can still use my OS to a new hard drive? pls help

  You must activate by phone and speak to a representative of activation.

  How to activate Windows 7 manually (activate by phone)

  1) click Start and in the search for box type: slui.exe 4

  (2) press the ENTER"" key.

  (3) select your "country" in the list.

  (4) choose the option "activate phone".

  5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

  (6) explain your problem clearly to the support person.

• New HARD drive is not recognized on Tecra M1

  Hello

  I am new to this forum, so apologies if this is an old question.

  My Tecra M1 gave a quality service for the past 6 years, but recently, the Toshiba management console has put a message saying that the HARD drive will fail quickly.

  I loaded immediately turned off my main files before you remove the HARD drive. It is a Toshiba MK6022gax 60 gig IDE hard drive. I bought a new disc of gigabytes of 60 MK6022gax, but when I mounted this same I got the error message "error ide #0". Installation XP or the BIOS can see this new record.

  I then reassembled the old HARD drive, which started OK. I then mounted the new disk in a USB enclosure, initialized, partitioned and quick formatted using the XP disk management. He picked up OK. Then I copied some files to it and read them back with no problems, then the drive itself works very well. But when I plug as the main 'C' drive, I get the error message again and is not recognized by the bios or XP put in place.

  Clearly, there is some BIOS (?) or startup procedure I have to do to get this recognized record. Help!

  I have Tecra M1 long with 60 GB HARD drive. Right now, I've updated compatible HDD TOSHIBA HDD 2184 B.
  I can confirm that the HARD drive is recognized correctly and I actually have the new install of WXP Pro.

  In any case, have you tried to upgrade the BIOS to the default settings?
  As far as I know that nothing should be set before you put the new HARD drive and it must be recognized correctly.

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• Portege 3500: Need a new HARD drive

  Hello

  I bought a Portege 3500 and after a few weeks of use, the hard disk or fan (safe) started to make loud noises and now every time I turn on the laptop screens toshiba rises and it happens eventually to a screen I wrote what he said below.

  I read somewhere that this means that my hard drive is over and I have to buy a new hard drive.
  Is this true and if so anyone know where I can get a drive hard because the laptop is old?

  The only one I've seen that is in stock is of about £230 and it's about the same price, I bought the laptop.
  Or is there a solution ive tried going on in all modes but it just restarts and Ive also tried to reinstall the OS using the cd but I can't in the menu option to reinstall XP.

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

  If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows normally.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt
  Last good Configuration known (your most recent settings that worked)
  Start Windows normally

  Use top and down arrow keys to move the selection of your choice.

  Seconds until Windows starts: 30 "

  Hello

  AFAIK Portege 3500 was equipped with the 40 GB IDE HDD.
  This is why you must use an IDE hard drives (not SATA).

  Now, it would be important to know what max HD size could be compatible;
  If the laptop supports 40 GB I think a 60 GB HARD drive might work too.

  I think that you should just google for some 40 GB, 60 GB hard drives, that supports the IDE!

  Best regards

• Re: Satellite C855 - installation of operating system on new HARD drive

  Hello everyone

  My son c855 SATELLITE are collected next week for the replacement of the hard disk to be mounted under warranty; does anyone know if the Windows operating system installed on the new HD?

  Of course you can do it. I just hope that you have created a recovery media.
  If Yes this recovery disc to install the original recovery image on the new HARD drive.

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• NB200-10 - new hard drive and media test failure

  We have 2 NB200 if we take hardrive out 1 and in the other data on the disk will be lost.

  I mounted new NB200-10z hardrive when turn on I get the error message 'media test check the cable to break. There is no cable as hard drive just plugs into t he average new hard drive is faulty?

  > f we take hardrive out 1 and in the other data on the disk will be lost

  Of course, you won't lose any data. If only you don't drop it on the ground. :)

• Pavilion p6230y: how to reinstall Windows on a new hard drive

  Hello

  Recently, I had a hard drive failure. The drive is about 7 years so I understand he lived a life busy for a long time, and I plan replace it. Unfortunately, I wasn't able to make the recovery discs and I don't have a windows CD, because it is installed on the disk hard when I bought the computer. If I had to buy a new HARD drive, how would I reinstall Windows on it without re-purchase a copy? I was told there would be a product key on the chasis somewhere but I couldn't find the model and serial number for the bureau, nothing to do with Windows. I also searched HP website to see if I could order recovery disks, but this option is not visible anywhere. Help, please!

  Thank you, Alex.

  Alex, welcome to the forum.

  Unfortunately, because you did not the system recovery media when you bought the computer, you will need to buy a full copy of Windows 7.

  Here's a guide to help you try to order the HP discs.  However, I believe that it is very unlikely that they are always available from your computer is more than 7 years old.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• new hard drive for laptop

  I have a laptop dv7-3140el and HD samsung HM641JI 640GB 2.5 "SATA 5400 RPM (to replace car failure). To buy a new hard drive I have to take the same or I can take 7200 RPM instead of 5400? What technical specifications should I look for when buying a hard drive for computer laptop dv7-3140el? I wouldn't make a bad purchase!

  Sorry for my bad English

  Hello

  Here are a few points to note when replacing your HARD drive:

  You are not limited to any particular drive manufacturer.

  The speed of rotation of the disc can be 5400 RPM or 7200 RPM

  The new drive HARD should be at least the same capacity (or slightly more is okay) as the original drive - mounting a drive smaller than the original often causes risks with recovery media.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  If necessary, the procedure to replace the hard drive begins on Page 47 of your maintenance & Service Guide.

  Kind regards

  DP - K

• Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

  Hello

  I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
  I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.

  After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
  I can't boot the CD of form (I can't select same drive to start by pressing F12)

  It just hangs.

  When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.

  I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.

  HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).

  You have no idea where could be the problem?
  Should I format hard drive in a different way?

  BR,

  hosss

  Hello

  Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.

  A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.

  Good bye