new installation, layout tabs, extend Dreamweaver, Site

Similar Questions

• Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but

  Using the MF and the "open a new tab" + sign opens a new page with a list of site visited recently, which is a very useful tool. It works fine on my two desktop computers, but I can't it to work on the laptop.

  I downloaded "New tab Pro" on the laptop (do not even see on desktop computers so don't think about) such that she was like the real deal but nope... do not work. Running the latest version of MF, ideas on how activate it please?

  Thank you guys are going to mark as 'resolved' BTW it is no "folder on the desktop named old data from Firefox. Hmmmmmm.

• Why FF act as if each start is a new installation and hang on to old tabs?

  I updated Firefox to version 8.0.1 to 9.0.1 about an hour ago, and it has been wrong since. I suspect it's a matter of preference, but I'm not sure.

  Every time I have start FF (or restart), he seems to think that this is the first time, it was run / installed. It checks the compatibility of each extension, once again.

  It also opens a new page in "Welcome to Firefox hooray... "as if it were a new installation. Each time, it adds a new tab with this message. Address, it opens:

  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

  In addition, it does not follow my load on startup home page settings. It sticks with the old tab rather than that it should open.

  I've already gone through and tried to use the information on the pages of the forum helps:

  https://support.Mozilla.org/en-us/KB/Firefox%20Has%20just%20updated%20tab%20shows%20each%20time%20You%20start%20firefox?s=page+opens+on+startup & r = 8 & As = s

  and

  https://support.Mozilla.org/en-us/KB/preferences%20are%20not%20saved

  They do not seem to have helped matters. Of course, I don't know exactly which lines in the Prefs.js file should be deleted, but I took:

  user_pref ("browser.tabs.closeWindowWithLastTab", false);
  user_pref ("browser.taskbar.lastgroupid", "Mozilla.Firefox.8.0.1");

  ... and the problems persist. I don't want to go lift more information that I do not understand. Thanks for any help.

  Oh, and I made sure there is no running session restore feature, AFAIK (including TabMixPlus). My settings of homepage in the menu Options are correct.

  To summarize:

  (1) stop FF to think every start/restart is a new installation.
  (2) get my home page to load to the correct address.

  I don't know what the problem with the old profile, and in this case, it is easier to try a new profile, that spend a lot of time to devote to what is wrong. It could be a prefs.js file or a problem with the registry extensions file or a problem with the files sessionstore or something else.

• Cannot create the new catalyst business of dreamweaver site using cc 2015...

  I can't create new catalyst business of dreamweaver site using cc 2015, yet on my other computer with the help of 2014 BusinessCatalyst is there, and some of us like things simplistic and without hassle and 2014 version works very well, why adobe take something of simplistic who worked a lot and updated to something that makes me consider to cancel all of my adobe account What's happening on Adobe, which was?

  You think you're getting better assistance in the forum Business Catalyst.

• I do not have 'PhoneGap Build service' tab of the site in the cc of DreamWeaver? What should I do?

  I do not have 'PhoneGap Build service' tab of the site in the cc of DreamWeaver? What should I do?

  Go directly to the website phone Gap building.

  Adobe Build PhoneGap

  DW can't stay with fast cycle updated phone Gap.

  Nancy O.

• I have updated Dreamweaver for 2014 and this toolbar disappeared.  I have a new installation of 2014 on another computer and the toolbar is there.

  I have updated Dreamweaver for 2014 and this toolbar has disappeared.

  

  I have a new installation of 2014 on another computer and the toolbar is there.

  Anyone know how to get it back?

  I'll make sure "Enable related files" is checked:

  

  Otherwise, click on apply once checked and then restart Dw.

• New Installation - download from Adobe's Web site or use the installation CD? CF 8

  Hello..

  I need to check... I already managed to buy Coldfusion 8 and an included installation CD.

  Since in the current situation there is a lot of fixes and patches for the Coldfusion 8... If I want to install it in a new fresh Server I should?

  1. use Setup from the given CD and then download the patch manually update my app server?

  2. or I just download a new installer for Coldfusion 8 from Adobe's Web site, hoping that this new installer has included all the current patches, so I don't have to do it manually? is it really as I hope or just that I dream?

  I'm a little confused on this subject... so please someone make me warm and clear on this fixed installation of process? I don't want to be left aside for the patches...

  Thank you...

  Available on the website of Adobe CF 8 installer is 8.0.1, as I mentioned previously. So download that. Then, you can simply install Cumulative Hot 4 difficulty - that's why they call it a fix 'cascading '. There may be some post-CH4 patches, but you will then apply them subsequently.

  Dave Watts, CTO, Fig Leaf Software

  http://www.figleaf.com/

  http://training.figleaf.com/

  Fig Leaf Software is a small business Veteran - Owned (VOSB) on

  GSA Schedule and provides high caliber of the authorized seller

  instruction at our training centers, online, or on-site.

  Read this before posting:

  http://forums.Adobe.com/thread/607238

• I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

  Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

  The anonymous gives path is for Vista not XP.

  The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

  See:
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  Display the hidden files and folders

  In XP, the path is usually:
  C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
  ("xxxxxxxx" is a unique alphanumeric identifier)

  When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

  See: recovery of data from an old profile

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites

• Upgrade Windows 7 to 8 leaves too many problems - is a new installation required?

  I spent literally the last 3 weeks by train to improve our 9 PCs from Windows 7 to Windows 8 and I have an incredible number of problems.

  For example:

  1 updates fail and return to Windows 7, unless all 3rd party drivers are uninstalled (Windows Update drivers are OK) and most of the software that contains services that interact with the material are uninstalled (such as CPU - Z, PC-Wizard, etc.).  Note that the Windows Upgrade Wizard indicates that these programs and drivers are OK (latest versions at least) it becomes an effort of trial and error to figure out what needs to be uninstalled to start successfully in Windows 8.

  2. I moved (using the folder properties supported ' location' tab) download for all users folder in the shared c:\users\public\downloads folder in Windows 7.  During the update the permissions folder become corrupted with the latest user created on the PC Windows 7, ending up as the only user with the permissions to read/write to this public folder.  The structure of NTFS in Windows 8 is damaged at this point and it '' believes '' the public downloads folder inherits permissions from user created c:\users\{last} instead of c:\users\public and is unable to change them.  I had to use icalcs substitute all c:\users\public file permissions manually down to allow other users to access the public download folder.  Check the hard drive (even to force a full audit) does not correct the inconsistent file permissions.

  3. the c:\users\public folder is shared even if a public share is off, but it is shared corrupt (read-only, but no remote users can actually access it and cannot be modified or deleted).  Change the 'sharing public folders' option has no effect.  Same "net share" may not change or see even the share of existing corruption.  I'm not able to create a sharing of this folder (results in an error message), or delete the existing share.  This problem is present on every PC, I've updated so far.

  4 family Safety is damaged and unusable.  Windows Live Family Safety has been one of the applications that caused the upgrade fails, then it has been uninstalled directly before the upgrade to Windows 8.  Unfortunately, this seems to leave Windows 8 in a State of dysfunction in security for the family.  I've been using an online id to log on to my children and this seems to have enabled temporarily family safety but not totally.  Unfortunately, the only way to make changes is the local PC as the fss.live.com site is no longer synchronizes with any of my Windows 8 PC (if I pass local ID and online, it syncs once).  Also delays no longer work and my children can stay on their PC, as long as they like.  I spent hours scouring the Web for a solution and other that "refresh the PC" or http://windows.microsoft.com/en-US/windows/essentials-2012-release-notes?T1=winlivefamilysafety I have not found a solution (I've not updated the PCs).

  5 Windows 8 apps don't work for one of my children on all accounts the PC but works very well for adult administrator accounts.  I tried everything from wsreset.exe, creation of new user accounts, temporarily making kids accounts administrator, uninstall, and reinstall, all apps, switching back and forth between accounts ID base and online local, etc manually.  Sometimes, that I managed to get re-installed applications to work temporarily, but after an opening session and closing session or possibly another user by connecting on the apps again fail (in failure, I mean it seems they start and then just close without an error message).  Even the app store is messed up for some users, in what he repeats to me it can not load the store, then, after pressing 'try again', it loads only a small subset of the store.  Also when I look at the apps installed (in the store) it shows nothing is installed and nothing is bought (not same mobiles which was installed by the same user on another PC of Windows 8; well on the other PC of Windows 8, they arise).

  6 folder and registry permissions are changed in many places and this causes some games to stop working.  Manually uninstall and reinstall the game solves the problem by opening of also manually security on folders and registry entries.  I assumed that the process of upgrading resets all the folder permissions and registry, but some older software requires write access to the folder 'program files' specific in order to update the configuration files, etc., and the upgrade process breaks it.

  7. any user that office has been moved (using the tab "location" supported in the method properties) has no read access to their workstation after authentication and Windows Explorer will not start (when you click on "desktop").  I had to delete and recreate the users, or manually change the folder permissions.

  8. users where their documents, photos and videos have been moved to a second hard drive (again using methods officially supported in Windows 7) end up with all sorts of issues such as incorrect file permissions, Windows 8 apps do not work until the user is deleted and recreated, etc..

  8. the problems seem to continue to go on and on.  Each day we discover a new broken feature that must be manually fixed one way or another and I lose all of my time to research on the web and try to resolve these problems.

  Unfortunately I still failed to operate Family Safety, nor have I managed to get Windows 8 job applications (more there are many other minor things that are broken, such as some items in Control Panel do not work, etc.) and officials "tips from Microsoft" seem to be "cool PC".  Unfortunately this is essentially a new installation of the operating system, as far as I'm concerned, because previously all installed software must be reinstalled manually.  I tried this on a PC (after saving) and I've always found that I had delete and recreate my children's accounts to get Windows 8 applications work.

  At this point I don't know what to do and how to proceed.  As a 'Christmas gift' we 'bought' Windows 8 for the world and I had planned to take advantage of the $39.99 special and free Media Center/Bitlocker/etc. addition which is available only until January 31.  Unfortunately, the upgrade process has been nothing less than a nightmare total and at this stage, I believe the following will produce:

  1. I need to break down and perform a new installation of Windows 8 on every single PC followed by reinstall all software and reconfigure all the user accounts, family safety, etc.  Otherwise realistically me uninterrupted work on all of this for the rest of the month (something that I don't really have time for).

  2 Microsoft needs to release updates of Windows 8, which allows to improve the level of experience and greatly improves the installation of Windows 8 resulting.

  3. I have abandon on the installation of Windows 8 at the moment, but I can't justify paying $269 - $469 in the future for Windows 8, so we'll probably with Windows 7, until we buy new computers.  I guess another partial option is to buy Windows 8 for $39.99 for each PC and then to later pay another $70 for the upgrade of Media Center/Bitlocker/etc. (currently we use Media Center on every single PC with 3 of our PCs being devoted to Media Center full-time and the rest operating as 'customers').

  Is there any hope that #2 is going to happen or Microsoft 'done' with the upgrade and will continue to recommend a "refresh" after an upgrade to solve problems?

  I've tried a fresh install of Windows 8 on a different partition with 5 of the 9 PC and it went flawless and very quickly (in less than an hour, I had all 5 upwards and running Windows 8 - although without additional software installed, no user accounts configured, etc.) so I know that it will work.  With one of these installs I have experimented with Windows 8 for a few days (and that my children and wife home to test) to confirm that everything seems to work properly, including applications of Windows 8, the installation of some of our software, etc..  Based on this, I think that all the questions that we are experiencing are caused by a routine upgrade of Windows 8 very fragile, not by the base Windows 8 operating system.

  I should also mention, I have backups of the installed Windows 7 original and I tried to restore and re-upgrade several times and even if I can improve things (returning to download default folder locations, additional software uninstall, etc.). I can't get Windows 8 apps working on my children's accounts, nor good difficulty number other issues (such as security for the family, permissions of file corrupted for some software, etc.).  Whenever I try it takes at least 4 hours, so I gave up trying to figure a way to upgrade "functional" at this stage.

  Thank you

  Steve

  I realize that Microsoft recommends customers perform a 'Refresh' on their upgrades of Windows 8 to solve many problems, but it is not a path I am willing to travel. I experiment in the updating of a PC, and as you say this has resolved most of the issues (even if once again, Windows 8 apps stopped working a few days later).

  .

  .

  .

  This resulted in the continuation of the process of upgrading for our family PCs (steps 9 to 33 are the steps in upgrade of base):

  1. Restore our latest backup of Windows 7 (before the upgrade to Windows 8). If still running Windows 7, perform a full backup.
  2. Make sure that the latest virus signatures are installed for the installed Antivirus (Microsoft Security Essentials in our case currently) software and run a full scan of the system.
  3. Download Windows 8 drivers for the hardware.
  4. Possibly find enough disk space to create a partition to restore the existing installation of Windows 7 (which just saved) to. This can be on a second drive or disk manager can be used to reduce an existing partition to create a new partition large enough to restore Windows 7. Restore Windows 7 for the new partition, and then name the new volume with a unique name (for example, TempWin7). EasyBCD to add partition newly restored to the Windows boot loader. Starting system test and make sure that the drive root (usually C:\) uses the new volume (check the drive c. name (this way if Windows 8 does not work you can return to Windows 7 easily.)) Finally, when you do know that Windows 8 is not working properly you can delete this volume). Note on my ~ 8th update attempt on the 2nd PC I was upgrade the upgrade has failed and left the system with a MBR corrupted with no way to start it. The MBR has been so badly damaged that the process of repair of Windows 7 and Windows 8 could not solve the problem. Same bootrec /fixmbr /fixboot, bcdboot c:\windows, bootsec all/force/MBR bootrec, etc. were not able to get a bootable system. I ended up performing a new installation of Windows 8 on another hard drive and then I added step 5 below to my list of upgrade tasks to ensure that I didn't not get stuck like this again).
  5. If the PC contains more than 1 hard drive and they are not all used in a hardware RAID, use EasyBCD to install the bootloader of Windows on the second/third hard disk and configure the boot loader to boot from the hard drive with all the bootable partitions configured (this provides a work around to get the operating system if the Windows 8 upgrade process fails and translates by a unbootable system).
  6. Download and run the tool TDSSKiller Rootkit, GMER Rootkit detection tool, Malwarebytes Anti-Rootkit and Anti-Malware Malwarebytes to make sure there are no hidden rootkits or malware installed. Uninstall all the installed utilities.
  7. Uninstall all software known to cause trouble (both reported using the upgrade wizard, search on the web and attempts to upgrade Windows-based 8 prior who does not).
  8. Once complete scanning, starting test the computer while forcing the BIOS to boot from the disk hard other to make you that there is an available alternative starting method.
  9. Uninstall Live Essentials 2011.
  10. Installing Live Essentials 2012 (this is because they have seen many cases where Windows 8 fails to migrate settings of Live Essentials 2011 properly and leaves you with a dysfunctional state that requires an update of the system for safety of work; Live Essentials 2012 is apparently able to migrate settings from 2011 and 8 Windows upgrade can apparently works with Live Essentials 2012 settings).
  11. Start Live parental controls and run through the configuration steps (without necessarily making changes) to ensure that the settings are migrated from the Live Essentials 2011.
  12. Sign in using each account monitored by parental control and after that the drive stop loading of applications, log off.
  13. Log on with an administrator account and uninstall Live Essentials 2012.
  14. Uninstall all anti-malware and anti-virus software and unplug the network cable
  . If security software Norton has been used, download Norton Removal Tool before uninstalling it and after using the program manager to uninstall, run the removal tool (note that Norton fails to remove certain services when you use the program to uninstall Manager that caused the Windows upgrade process 8 fail on one of our PCs other AV software may have similar problems).
• Activate Microsoft Defender and Windows Firewall.
• Uninstall everything about software and software which includes services that interact with the hardware or virtual hardware.
• Uninstall all 3rd third-party drivers that are specifically designed to interact with the user and if possible only to install the drivers for "Windows Update". If not available, install just the naked driver for the device or leave the unit without a driver during the upgrade process, if it is not critical manually.
• Uninstall the video driver ATI, including the Catalyst Control Center software (even if the driver is listed as support Windows 7 and Windows 8, CCC upgrade breaks and leaves the system with the dysfunctional video settings in Windows 8)
. Allow Windows Update to install the basic video driver only or install manually only the video base by using the device manager driver.
• If all user folders have been moved in Windows 7, move them back to the default locations. For example we moved the documents, photos, videos and office on a secondary hard drive on some PC and these user accounts is damaged because of this sequel to the upgrade of Windows 8. We also move all folders download user to c:\user\public\downloads and this too must be moved to the location of the individual user (c:\user\{user}\downloads) before the upgrade because it causes corruption of NTFS security after the upgrade to Windows 8.
• Perform an upgrade on-site (repair) of Windows 7 SP1 to Windows 7 SP1 to upgrade the operating system in a known and stable state. Note that this must be done with a DVD of Windows 7 SP1 RTM and slipstream not updated media, nor can it be done with a DVD of Windows 7 without SP1.
• If necessary, connect the network cable and install all updates using Windows Update critical update (note, officially, it is recommended that the system is fully updated before you attempt to upgrade to Windows 8, but technical support suggests why a clean Windows 7 SP1 install with a few critical updates which should install automatically if updates to the installer of Windows 8 are enabled during the process) at level).
• Optionally, install the latest Microsoft System (KB947821) tool. If an upgrade on the spot did not it is a critical step, but with the upgrade on the spot, it should be redundant and not required (this tool checks the status of the update of the operating system and makes sure that every file that is supposed to be updated through any installed update is updated. He then sets up Windows Update to install or reinstall incompatible updates may not be correct).
• Installing Live Essentials 2012 (it is not clear if this step is necessary, but apparently the upgrade in-place to Windows 7 can potentially cause of parental control settings enter an inconsistent state).
• Connect the network cable and using an administrator account set up parental controls.
• Log in using accounts controlled by parental control
. Once the disk activity subsides, sign out.
• By using an administrator account uninstall Live Essentials 2012.
• Run a chkdsk /f on the drive system and start-up and restart.
• Connect the network cable (if it is disconnected) and perform an upgrade from Windows 7 to Windows 8 on-site, ensuring that the post-installation updates are enabled during the process and that there is an Internet connection.
• Activate and install the Media Center add-on by using the same key used in the previous attempt to upgrade to Windows 8.
• "Turn Windows Features on / off" enables the Hyper-V instead of Virtual PC and XP Mode (even if Virtual PC and XP Mode have been installed and being used in Windows 7, the upgrade process uninstalls them and does not allow for Hyper-V, which is the replacement of Windows 8).
• Updates by using Windows Update, select all the recommended and the optional updates (deselect everything, you don't want such as Bing Office; right click and hide updates you don't want), click 'Install' to start the download. Allow the download and install updates before proceeding to the next step.
• Install Windows 8 3rd part drivers If Windows 8 specific drivers are available and desired. This includes installing the latest video driver for Windows 8.
• Connect with each user and pass to a Microsoft Account to activate parental control. Open a session out and back in.
• The Bank of Windows startup, click on in the upper right corner and update all installed applications which have updates available.
• Restart the Windows store, right click and select the installed applications. Install all of the applications associated with the Microsoft Account, you already have installed (and want to install). Do this for each user.
• Configure Hyper-V to replace Virtual PC to virtual operating systems.
• Install a previously uninstalled like cell phone software, CPU - Z, EasyBCD software, etc. (as long as it supports Windows 8).
• EasyBCD allows to set up the dual boot or triple (most of our PC have MCE2005 (XP), Vista and Windows 7 on separate partitions or units).

I stressed step 20 above, because the technical support said they find that this step can make a significant improvement in the final Windows 8 upgrade results. Without the Windows 7 upgrade (repair) inplace before the upgrade to Windows 8, he said that they have poor results that require an update of the system to get things to work. By adding this step, step Live Essentials 2012 associated, by ensuring more 3rd third-party drivers are uninstalled, uninstalled all the 3rd party software that interacts with the hardware and all records are found in their locations by default, the upgrade process is apparently much more likely to result in a closing fully functional install Windows 8. Unfortunately, told me that they always have problems with some PCs, even after all the above, and that is why a new installation is always the best approach. They also said that until that antivirus makers improve their compatibility Windows 8 it is better to stick with the software antivirus from Microsoft that is built into Windows 8 and not install any AV 3rd party software.

Anyone have any additional suggestions or disagree with the installation steps above? Although it is a lot of work, if it is, it will be much easier than a new installation and I already spent 100's of hours trying to get Windows 8 to upgrade properly and 100's of hours trying to clean upgrades corrupt I end up with (with only partial success).

I have a total of 11 PC, I tried to upgrade to Windows 8 and so far I have 2 semi-functional updated of (with control parental does not not work and Windows 8 Apps doesn't work is not for non-administrator accounts). For the moment, I restored Windows 7 (reconfigured the Boot Manager to start Windows 7 instead of Windows 8) with the 4 other PCs ended up broke after trying to upgrade to Windows 8.

IT WORKED!

Finally, I updated 2 PCs from Windows 7 to Windows 8 with parental control and applications of Windows 8 works for all users and I didn't have to mess with security of folder or the registry, difficulty missing junctions or mess around with anything to get this working.  In addition, for the first time, I didn't need to perform a refresh and reinstall all software (programs and features shows 187 programs installed to a PC and the other has more than 200).  So far, looks absolutely everything works (even if I did have enough time to ensure that the reports of parental control and all safety features are 100% still works but it doesn't look like it will).

The bad news is that it took 8 hours to upgrade each PC because of the number of steps (compared to the hundreds of hours lost trying to get the previous corrupt Windows 8 updates work properly, it was easy).  In the future, I'll work on several computers at the same time to speed things up.  Upgrading Windows 7 on Windows 7 on-site took several hours alone, but I think that this step is crucial to get an upgrade of Windows 8 fully functional (Technical Support of Microsoft agent I talked to strongly recommended this step and said that it was necessary to upgrade his personal computer Windows 7 to Windows 8 also).

Now I have 9 PCs to go.  For PCs with a minimum software installed and with a rootkit, I will perform a new installation but the rest I'm going to use this procedure.

The next challenge is to get enough key to install Media Center on each of them.

• Link a button in flash for a dreamweaver site

  I am having trouble linking a button in my flash of a separate dreamweaver site animation. The flash animation will be placed in

  the homepage of a website and I want to be able to click on a button to go to a separate page. try the code I have is:

  RF1.addEventListener(MouseEvent.CLICK,clickHandler); 
  function clickHandler(event:MouseEvent):void{ 
  navigateToURL(new URLRequest("http://Bleachers_Top.html")); 
  } 
  

  where RF1 is my button and my is "Bleachers_Top.html of page target"

  I'm sure that the last part is not true, but I can't seem to find any help on how to do it.

  I get this error when I try, does it mean that it is an error of installation of flash player in this case - that someone knows another way to do this because I don't want to have to change their Flash security options when they see it.

  

  Thanks in advance

  Blanched Andrew

  Same code, just a relative url...

  navigateToURL (new URLRequest ("Bleachers_Top.html"));

• Some Images open in a new window or tab are backwards or rotated 90 degrees,

  Some Images open in a new window or tab are backwards or rotates 90 degrees, but they appear in the correct position when you use Internet EXPLORER.

  I don't even know if it's a browser or a browser-server interaction problem. The problem manifests a certain user forums where members post jpg images that appear as thumbnails. "I can right-click and select"Open in new window"or open in a new tab. Either way some images open OK, some open pivot 90 degrees out of position sometimes upside down. If I use Internet EXPLORE the same images will open on the right side.

  computer: Dell Latitude
  OS: Windows 7 Pro
  Browsers: Firefox 41.02 / MSIE 11.0.9600.18059

  MysteryTech said

  Not in bold. Looks like this:
  Layout.CSS.image - orientation.enabled; true
  Status: default
  Boolean type

  Laughing out loud! But if I double-click on it replaces:
  Layout.CSS.image - orientation.enabled; false
  Set of users of status
  Boolean type

  Now when I right-click the image and select either "open in new tab" or "open in new window" the image is right-side up!
  

  Thanks to you all!

• New installation of Xubuntu w / Firefox on my PC. Everything works VERY slowly, even typing and cursor movement. Is - fixable?

  With this new installation of Xubuntu (which is supposed to be quick enough) with Firefox included, all transactions processed through the browser are incredibly slow: typing, go to other pages or Web sites; move the cursor is painfully slow, and sticky with time delayed reaction and excessive results. I have the maximum encryption and security; This could be the problem? Note: I noticed that type in this window is normal...? E-mail is correct, also.

  Thank you very much
  Bob

  Glad your problem is solved itself, and I see that you have also your problem another (1012424/questions/1012424). Don't forget to update Firefox, it should be 31 Firefox now or if Xubuntu is a bit behind perhaps still Fx30 but certainly not Fx28.

  Be aware that you will see big changes in Firefox

  • Learn more about the design of the new Firefox version 29
  • https://www.Mozilla.org/en-us/Firefox/tour/

  You mentioned

  why would they include an unsupported version of Firefox in the same package with the newest version of an operating system?
  

  Ubuntu and Xubuntu major versions come out every six months. Firefox updates every six weeks. Probably the first thing to do after you have installed a new version of X / Ubuntu is updated the software, also immediately before the upgrade to the next Xubuntu.

  Versions of Firefox & Ubuntu/Xubuntu

  I use Ubuntu 12.04 LTS for most. 14.04 is also LTS, so you have to stay on that instead of update in due course to 14.10

  • Pretty graph http://en.wikipedia.org/wiki/Ubuntu_versions#Table_of_versions

  I use their distro Canon of construction of Firefox since their deposit of Aurora. Who is behind Mozilla versions datewise (I also installed mozilla versions), but it uses the package manager, so no need for manual updates of Firefox. You probably don't want or need to do that, but if you do not want to install this as a browser extra is available for 12.04 & 14.04 of

  • https://Launchpad.NET/~Ubuntu-Mozilla-daily/+archive/Ubuntu/Firefox-Aurora
  • If you are interested by sets it Mozilla see
    Installing Firefox on Linux
    & https://help.ubuntu.com/community/FirefoxNewVersion

  Synaptic (graphical APT front-end server) package manager is therefore longer in default distributions of Ubuntu/Xubuntu, you could add Synaptic (included in gDebi in Xubuntu 12.04) otherwise use the "Software Center" to ensure that everything is kept up-to-date

  • Software Center http://askubuntu.com/questions/4983/what-are-ppas-and-how-do-i-use-them/40351#40351
    • https://sites.Google.com/site/easylinuxtipsproject/first-Xubuntu#TOC-apply-all-available-updates
  • Https://help.ubuntu.com/community/SynapticHowto Synaptic Package Manager

  I know that some earlier versions of Ubuntu to (less LTS versions) the canonical versions of Firefox did not update, but I expect the center of software or package manager to be able to keep Firefox reasonably aware and do not drop by more than one version.

• Safari now load of items from the new york times or IRS Web site

  Safari now load of items from the new york times or IRS Web site

  I tried to change the notifications including to get rid of all the

  I encouraged webgl and plug-ins

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Quit and then relaunch Safari a try these Web sites.

• When you click on "don't show this again option" in "Firefox prevented this page to open in a new window or tab," How do you get the window of options again?

  I clicked by mistake on the choice of "don't show this again option" in the "Firefox prevented this page open in a new window or tab", and now I can't understand how "uncheck" the box and back again once the window options.

  My bad - it was the pop up Adblock Plus 0.7 Addon.

  "I went just the Firefox button orange > Modules > Adblock Plus pop-up Addon 0.7 - > Options > my site rules > the site right click > edit > checked 'Block all pop-up windows' and unchecked" this rule applies to: 'New Windows' and 'new tab '.

  Presto! Firefox works as before.

  I didn't know I had controls within the addon that would affect the Firefox popup blocks the action.

  Please call the attention on the "details of the system more.»

• New installation of ff15 crashes always in under a minute

  After way too much nagging, I improved a product that worked, ff3.6, one who is not, ff15. It upgraded 3 plugins.
  Now when I open ff, no matter if I try actually use or just sit and look at a blank page, it crashes in about 30 seconds.
  Try to go there, more than 20 times on a new installation!
  Using XP. But this gave me the excuse to try Chrome and I found that it is very stable and much, much faster. And of course, I use Chrome now to send this message.

  OK, I discovered that kdump.dll is also used by Kingsoft PC Doctor. I have disable Kingsoft PC Doctor, and I was able to use Firefox normally.

  I have similar installation in the office where I use Windows 7, so far no problem...

  Microsoft Office installation
  OS: Windows 7 Pro SP1
  FF: 15.01
  Kingsoft PC Doctor 3.7, Antivirus 2012 (Cheetah) SP5.0

  Homepage:
  Windows 7 Home Premium SP1 operating system
  FF: 15.01
  Kingsoft PC Doctor 3.31.9 (with security option construction in)-last

  Since you the Kingsoft has been installed before.

  It thus means that Firefox may have to change its use of kdump.dll

  SB