New installation of ESX 4.1 U1 - unable to connect

Similar Questions

• New installation of XE on Linux 5 - ORA-01017 connection error

  This is an image of Linux VM on Win 7.
  The listener is in place and the database seems to be upward.
  I, ' su - oracle ' and the various env vars are defined.
  I installed the groupid and oracle is a member of them.
  I also made one, "ssh systemname", in order to verify the login passwd file.
  Oracle is in the file of sudo.
  I uninstalled and installed several times.
  Reboot the kernel image Linux seems to start to Oracle and the TNS listener.
  I tried sqlplus connection with oracle, sys, system as sysdba. I checked my group id and it contains: oracle, dba, oper, oinstall.
  The files have all 755 and owned by oracle: dba.
  I searched all over the web and I was not able to find anything that helps.
  Any help would be great!
  
  If I,
  sqlplus/nolog
  Conn sys/passwd@xe
  
  ERROR:
  ORA-01017: name of user and password invalid. connection refused
  
  ----
  sqlplus / as sysdba
  ERROR:
  ORA-01031: insufficient privileges
  
  Edited by: 982515 January 17, 2013 09:39

  Hi Tom,

  uniq-d will be only taken as of the values that are adjacent, but not if they are separated by an another value (s).

  That's right, thanks for pointing that out! I took the wrong line of my history of the shell. The last command I tested with resembled

  cut -f1 /etc/group -d ":" | sort | uniq -d
  

  and of course, you could grep for dba, but I think you should check all entries of group duplicates.

  -Udo

  P. S.: thank you for tagging messages! It should be possible to remove the useful marker, but I'm not sure that it (still) works since the last update the forum software. Of course, you can use this message with the chain set for checking for duplicates.

• Unable to connect to wifi on my new HP Notebook PC 15

  Hello!

  I bought a new laptop HP 15 PC who is unable to connect to the wifi. I understand that I have to install drivers, please help me. Here are my product Details;

  Hardware ID:

  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C & REV_01
  PCI\VEN_168C & DEV_0036 & SUBSYS_217F103C
  PCI\VEN_168C & DEV_0036 & CC_028000
  PCI\VEN_168C & DEV_0036 & CC_0280

  Model: 15-d019TU

  Product number: F7Q00PA #UUF

  Hoping to hear from you soon. Thank you

  Hello:

  This driver should work.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1 & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  If your model is equipped with bluetooth, you also need this driver...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?spf_p.tpst=swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_126765_1 & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Unable to find IBM DB2 400 KMs in the new installation of 12 ODI...

  Hello ODI Experts.

  I was unable to find Knowledge IBM DB2 400 Modules in my new installation of 12 ODI. I missed something? I can see clearly that oracle has listed these knowledge modules in their documentation.

  http://docs.Oracle.com/middleware/1212/ODI/ODIKM/DB2.htm.

  Thank you

  Hello

  It IS that your version of 12 c ODI is 12.1.2.0.0, if yes, you must apply a Patch 17836908 on top of ODI 12.1.2.0.0 12 c and it will add the missed KM related to DB2/400 technology and more during the ODI version 12 c will increase from 12.1.2.0.0 to 12.1.2.0.1

  Hope this can help you

  Kind regards

  Phanikanth

• Unable to connect to the URL of planning after new installation & configuration 11.1.2

  I installed 11.1.2 on Windows 64 bit environment and configured.
  
  This is my environment:
  Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
  Box 2. Planning. Installation and configuration was successful.
  
  Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)
  
  Trobleshooting:
  When executing netstat, 8300 does not run on this box.
  Also configured to 'Manage the clusters of planning' with no luck.
  The WebLogic (11g) server indicated State planning is unknown.
  Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
  I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
  Journal of planning does not reveal the error messages.
  EMP system log shows ServletContainerAdapter manager not initialized successfully
  There is no error in start-HyS9Planning - out .log.
  Start-HyS9Planning - error.log shows the requested service has already been started.
  
  There is an error in the validation log:
  
  [2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
  java.lang.Exception: java.net.ConnectException: connection refused: connect
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
  at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
  at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
  at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
  to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
  at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
  to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
  to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
  at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
  at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
  at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
  to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
  to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
  Caused by: java.net.ConnectException: connection refused: connect
  at java.net.PlainSocketImpl.socketConnect (Native Method)
  at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
  at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
  at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
  at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
  at java.net.Socket.connect(Socket.java:519)
  at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
  at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
  to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
  at sun.net.www.http.HttpClient.New (HttpClient.java:306)
  at sun.net.www.http.HttpClient.New (HttpClient.java:323)
  at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
  at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
  at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
  at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
  ... 21 more
  
  ]]
  
  
  What am I not doing?
  
  Thanks for your help in advance!
  
  Published by: VenuRamini on October 6, 2010 07:25
  
  Published by: VenuRamini on October 6, 2010 07:35

  Make sure that the Weblogic password is correct in the boot.properties and restart the services.

  Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\\security\boot.properties

  For example,.

  For APS:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. Properties

  For Regional service:
  D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. Properties

  HTH-
  Jasmine.

• Unable to connect to the drop folder digital network after the installation of the new wireless router

  I have already scanned to the folder of network of digital repository on a printer HP 8500 wireless, connected to a wireless G home network. However, I recently bought a new superisolants wireless router and am no longer able to use the scan function. I now get an error message that says: unable to connect to \\Computer\Folder Make sure the remote computer is turned on. The printer on the wireless network and works very well except for scanning to the folder of the network of Direct deposit. Thank you.

  I called HP tech support last night that had me add IP address of the printer to the McAfee Firewall as an approved connection. Digital archiving to the network folder scan function works now.

• "Unable to connect to the computer printer" message appears during installation of laserjet p1102w.

  During the installation of the wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to the wireless network.  However, this computer is unable to connect to the printer. "I checked the printer and the computer both connected to the same network named with even WEP key, opening, credentials etc.  I have a linksys connected to the computer and the modem cable. When I connect using the USB connect wire to the computer directly, I can print.   Two software, wired and wireless, have been loaded.  My HP inkjet printer is wired to the linksys and works for multiple computers to the wireless network. Do I need to have another printer? I thought that I could still have a truly printer wireless!  I'm a novice at this.  Thanks for any help you can give.

  I called HP support.  The technology was very knowledgeable and accommodating.  HP Smart Install program (in the printer and on CD) that came in the box was an old version.  I had to reset the printer back to factory default and to download the new firmware on the HP.com website.

  The oldest had an incorrect address router (network). You can see the address of the router (IP) when you perform the self-test (hold down the button "on") under the information network.  IPv4 address must be the same as your router.  Now my printer and computer are looking at the same network.

  Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4 L.

• Cannot start the new installation

  Good evening

  Tonight, I installed a new motherboard, power supply, CPU, video card, video card, etc. Basically, everything but the hard drive.

  When I went to it starts, I was unable to make it work. My BIOS seemed to have been implemented correctly. The repair was insufficient and unable to fix anything.

  I can't find my boot drive to run it.

  Can I do to solve this problem? Any help would be grateful.

  Original title: new installation

  Hello

  After such a drastic physical change that Windows will no longer work (because of all the parameters differ from your configuration (very basic explanation)), and you have to reinstall the entire operating system.

  You can do it with a Windows 7 installation disc or a support. Be aware that if you have an OEM license this license no longer works, check the sticker on the box to see if your system was oem (sticker will have OEM, OA of COA inside)

• Upgrade Windows 7 to 8 leaves too many problems - is a new installation required?

  I spent literally the last 3 weeks by train to improve our 9 PCs from Windows 7 to Windows 8 and I have an incredible number of problems.

  For example:

  1 updates fail and return to Windows 7, unless all 3rd party drivers are uninstalled (Windows Update drivers are OK) and most of the software that contains services that interact with the material are uninstalled (such as CPU - Z, PC-Wizard, etc.).  Note that the Windows Upgrade Wizard indicates that these programs and drivers are OK (latest versions at least) it becomes an effort of trial and error to figure out what needs to be uninstalled to start successfully in Windows 8.

  2. I moved (using the folder properties supported ' location' tab) download for all users folder in the shared c:\users\public\downloads folder in Windows 7.  During the update the permissions folder become corrupted with the latest user created on the PC Windows 7, ending up as the only user with the permissions to read/write to this public folder.  The structure of NTFS in Windows 8 is damaged at this point and it '' believes '' the public downloads folder inherits permissions from user created c:\users\{last} instead of c:\users\public and is unable to change them.  I had to use icalcs substitute all c:\users\public file permissions manually down to allow other users to access the public download folder.  Check the hard drive (even to force a full audit) does not correct the inconsistent file permissions.

  3. the c:\users\public folder is shared even if a public share is off, but it is shared corrupt (read-only, but no remote users can actually access it and cannot be modified or deleted).  Change the 'sharing public folders' option has no effect.  Same "net share" may not change or see even the share of existing corruption.  I'm not able to create a sharing of this folder (results in an error message), or delete the existing share.  This problem is present on every PC, I've updated so far.

  4 family Safety is damaged and unusable.  Windows Live Family Safety has been one of the applications that caused the upgrade fails, then it has been uninstalled directly before the upgrade to Windows 8.  Unfortunately, this seems to leave Windows 8 in a State of dysfunction in security for the family.  I've been using an online id to log on to my children and this seems to have enabled temporarily family safety but not totally.  Unfortunately, the only way to make changes is the local PC as the fss.live.com site is no longer synchronizes with any of my Windows 8 PC (if I pass local ID and online, it syncs once).  Also delays no longer work and my children can stay on their PC, as long as they like.  I spent hours scouring the Web for a solution and other that "refresh the PC" or http://windows.microsoft.com/en-US/windows/essentials-2012-release-notes?T1=winlivefamilysafety I have not found a solution (I've not updated the PCs).

  5 Windows 8 apps don't work for one of my children on all accounts the PC but works very well for adult administrator accounts.  I tried everything from wsreset.exe, creation of new user accounts, temporarily making kids accounts administrator, uninstall, and reinstall, all apps, switching back and forth between accounts ID base and online local, etc manually.  Sometimes, that I managed to get re-installed applications to work temporarily, but after an opening session and closing session or possibly another user by connecting on the apps again fail (in failure, I mean it seems they start and then just close without an error message).  Even the app store is messed up for some users, in what he repeats to me it can not load the store, then, after pressing 'try again', it loads only a small subset of the store.  Also when I look at the apps installed (in the store) it shows nothing is installed and nothing is bought (not same mobiles which was installed by the same user on another PC of Windows 8; well on the other PC of Windows 8, they arise).

  6 folder and registry permissions are changed in many places and this causes some games to stop working.  Manually uninstall and reinstall the game solves the problem by opening of also manually security on folders and registry entries.  I assumed that the process of upgrading resets all the folder permissions and registry, but some older software requires write access to the folder 'program files' specific in order to update the configuration files, etc., and the upgrade process breaks it.

  7. any user that office has been moved (using the tab "location" supported in the method properties) has no read access to their workstation after authentication and Windows Explorer will not start (when you click on "desktop").  I had to delete and recreate the users, or manually change the folder permissions.

  8. users where their documents, photos and videos have been moved to a second hard drive (again using methods officially supported in Windows 7) end up with all sorts of issues such as incorrect file permissions, Windows 8 apps do not work until the user is deleted and recreated, etc..

  8. the problems seem to continue to go on and on.  Each day we discover a new broken feature that must be manually fixed one way or another and I lose all of my time to research on the web and try to resolve these problems.

  Unfortunately I still failed to operate Family Safety, nor have I managed to get Windows 8 job applications (more there are many other minor things that are broken, such as some items in Control Panel do not work, etc.) and officials "tips from Microsoft" seem to be "cool PC".  Unfortunately this is essentially a new installation of the operating system, as far as I'm concerned, because previously all installed software must be reinstalled manually.  I tried this on a PC (after saving) and I've always found that I had delete and recreate my children's accounts to get Windows 8 applications work.

  At this point I don't know what to do and how to proceed.  As a 'Christmas gift' we 'bought' Windows 8 for the world and I had planned to take advantage of the $39.99 special and free Media Center/Bitlocker/etc. addition which is available only until January 31.  Unfortunately, the upgrade process has been nothing less than a nightmare total and at this stage, I believe the following will produce:

  1. I need to break down and perform a new installation of Windows 8 on every single PC followed by reinstall all software and reconfigure all the user accounts, family safety, etc.  Otherwise realistically me uninterrupted work on all of this for the rest of the month (something that I don't really have time for).

  2 Microsoft needs to release updates of Windows 8, which allows to improve the level of experience and greatly improves the installation of Windows 8 resulting.

  3. I have abandon on the installation of Windows 8 at the moment, but I can't justify paying $269 - $469 in the future for Windows 8, so we'll probably with Windows 7, until we buy new computers.  I guess another partial option is to buy Windows 8 for $39.99 for each PC and then to later pay another $70 for the upgrade of Media Center/Bitlocker/etc. (currently we use Media Center on every single PC with 3 of our PCs being devoted to Media Center full-time and the rest operating as 'customers').

  Is there any hope that #2 is going to happen or Microsoft 'done' with the upgrade and will continue to recommend a "refresh" after an upgrade to solve problems?

  I've tried a fresh install of Windows 8 on a different partition with 5 of the 9 PC and it went flawless and very quickly (in less than an hour, I had all 5 upwards and running Windows 8 - although without additional software installed, no user accounts configured, etc.) so I know that it will work.  With one of these installs I have experimented with Windows 8 for a few days (and that my children and wife home to test) to confirm that everything seems to work properly, including applications of Windows 8, the installation of some of our software, etc..  Based on this, I think that all the questions that we are experiencing are caused by a routine upgrade of Windows 8 very fragile, not by the base Windows 8 operating system.

  I should also mention, I have backups of the installed Windows 7 original and I tried to restore and re-upgrade several times and even if I can improve things (returning to download default folder locations, additional software uninstall, etc.). I can't get Windows 8 apps working on my children's accounts, nor good difficulty number other issues (such as security for the family, permissions of file corrupted for some software, etc.).  Whenever I try it takes at least 4 hours, so I gave up trying to figure a way to upgrade "functional" at this stage.

  Thank you

  Steve

  I realize that Microsoft recommends customers perform a 'Refresh' on their upgrades of Windows 8 to solve many problems, but it is not a path I am willing to travel. I experiment in the updating of a PC, and as you say this has resolved most of the issues (even if once again, Windows 8 apps stopped working a few days later).

  .

  .

  .

  This resulted in the continuation of the process of upgrading for our family PCs (steps 9 to 33 are the steps in upgrade of base):

  1. Restore our latest backup of Windows 7 (before the upgrade to Windows 8). If still running Windows 7, perform a full backup.
  2. Make sure that the latest virus signatures are installed for the installed Antivirus (Microsoft Security Essentials in our case currently) software and run a full scan of the system.
  3. Download Windows 8 drivers for the hardware.
  4. Possibly find enough disk space to create a partition to restore the existing installation of Windows 7 (which just saved) to. This can be on a second drive or disk manager can be used to reduce an existing partition to create a new partition large enough to restore Windows 7. Restore Windows 7 for the new partition, and then name the new volume with a unique name (for example, TempWin7). EasyBCD to add partition newly restored to the Windows boot loader. Starting system test and make sure that the drive root (usually C:\) uses the new volume (check the drive c. name (this way if Windows 8 does not work you can return to Windows 7 easily.)) Finally, when you do know that Windows 8 is not working properly you can delete this volume). Note on my ~ 8th update attempt on the 2nd PC I was upgrade the upgrade has failed and left the system with a MBR corrupted with no way to start it. The MBR has been so badly damaged that the process of repair of Windows 7 and Windows 8 could not solve the problem. Same bootrec /fixmbr /fixboot, bcdboot c:\windows, bootsec all/force/MBR bootrec, etc. were not able to get a bootable system. I ended up performing a new installation of Windows 8 on another hard drive and then I added step 5 below to my list of upgrade tasks to ensure that I didn't not get stuck like this again).
  5. If the PC contains more than 1 hard drive and they are not all used in a hardware RAID, use EasyBCD to install the bootloader of Windows on the second/third hard disk and configure the boot loader to boot from the hard drive with all the bootable partitions configured (this provides a work around to get the operating system if the Windows 8 upgrade process fails and translates by a unbootable system).
  6. Download and run the tool TDSSKiller Rootkit, GMER Rootkit detection tool, Malwarebytes Anti-Rootkit and Anti-Malware Malwarebytes to make sure there are no hidden rootkits or malware installed. Uninstall all the installed utilities.
  7. Uninstall all software known to cause trouble (both reported using the upgrade wizard, search on the web and attempts to upgrade Windows-based 8 prior who does not).
  8. Once complete scanning, starting test the computer while forcing the BIOS to boot from the disk hard other to make you that there is an available alternative starting method.
  9. Uninstall Live Essentials 2011.
  10. Installing Live Essentials 2012 (this is because they have seen many cases where Windows 8 fails to migrate settings of Live Essentials 2011 properly and leaves you with a dysfunctional state that requires an update of the system for safety of work; Live Essentials 2012 is apparently able to migrate settings from 2011 and 8 Windows upgrade can apparently works with Live Essentials 2012 settings).
  11. Start Live parental controls and run through the configuration steps (without necessarily making changes) to ensure that the settings are migrated from the Live Essentials 2011.
  12. Sign in using each account monitored by parental control and after that the drive stop loading of applications, log off.
  13. Log on with an administrator account and uninstall Live Essentials 2012.
  14. Uninstall all anti-malware and anti-virus software and unplug the network cable
  . If security software Norton has been used, download Norton Removal Tool before uninstalling it and after using the program manager to uninstall, run the removal tool (note that Norton fails to remove certain services when you use the program to uninstall Manager that caused the Windows upgrade process 8 fail on one of our PCs other AV software may have similar problems).
• Activate Microsoft Defender and Windows Firewall.
• Uninstall everything about software and software which includes services that interact with the hardware or virtual hardware.
• Uninstall all 3rd third-party drivers that are specifically designed to interact with the user and if possible only to install the drivers for "Windows Update". If not available, install just the naked driver for the device or leave the unit without a driver during the upgrade process, if it is not critical manually.
• Uninstall the video driver ATI, including the Catalyst Control Center software (even if the driver is listed as support Windows 7 and Windows 8, CCC upgrade breaks and leaves the system with the dysfunctional video settings in Windows 8)
. Allow Windows Update to install the basic video driver only or install manually only the video base by using the device manager driver.
• If all user folders have been moved in Windows 7, move them back to the default locations. For example we moved the documents, photos, videos and office on a secondary hard drive on some PC and these user accounts is damaged because of this sequel to the upgrade of Windows 8. We also move all folders download user to c:\user\public\downloads and this too must be moved to the location of the individual user (c:\user\{user}\downloads) before the upgrade because it causes corruption of NTFS security after the upgrade to Windows 8.
• Perform an upgrade on-site (repair) of Windows 7 SP1 to Windows 7 SP1 to upgrade the operating system in a known and stable state. Note that this must be done with a DVD of Windows 7 SP1 RTM and slipstream not updated media, nor can it be done with a DVD of Windows 7 without SP1.
• If necessary, connect the network cable and install all updates using Windows Update critical update (note, officially, it is recommended that the system is fully updated before you attempt to upgrade to Windows 8, but technical support suggests why a clean Windows 7 SP1 install with a few critical updates which should install automatically if updates to the installer of Windows 8 are enabled during the process) at level).
• Optionally, install the latest Microsoft System (KB947821) tool. If an upgrade on the spot did not it is a critical step, but with the upgrade on the spot, it should be redundant and not required (this tool checks the status of the update of the operating system and makes sure that every file that is supposed to be updated through any installed update is updated. He then sets up Windows Update to install or reinstall incompatible updates may not be correct).
• Installing Live Essentials 2012 (it is not clear if this step is necessary, but apparently the upgrade in-place to Windows 7 can potentially cause of parental control settings enter an inconsistent state).
• Connect the network cable and using an administrator account set up parental controls.
• Log in using accounts controlled by parental control
. Once the disk activity subsides, sign out.
• By using an administrator account uninstall Live Essentials 2012.
• Run a chkdsk /f on the drive system and start-up and restart.
• Connect the network cable (if it is disconnected) and perform an upgrade from Windows 7 to Windows 8 on-site, ensuring that the post-installation updates are enabled during the process and that there is an Internet connection.
• Activate and install the Media Center add-on by using the same key used in the previous attempt to upgrade to Windows 8.
• "Turn Windows Features on / off" enables the Hyper-V instead of Virtual PC and XP Mode (even if Virtual PC and XP Mode have been installed and being used in Windows 7, the upgrade process uninstalls them and does not allow for Hyper-V, which is the replacement of Windows 8).
• Updates by using Windows Update, select all the recommended and the optional updates (deselect everything, you don't want such as Bing Office; right click and hide updates you don't want), click 'Install' to start the download. Allow the download and install updates before proceeding to the next step.
• Install Windows 8 3rd part drivers If Windows 8 specific drivers are available and desired. This includes installing the latest video driver for Windows 8.
• Connect with each user and pass to a Microsoft Account to activate parental control. Open a session out and back in.
• The Bank of Windows startup, click on in the upper right corner and update all installed applications which have updates available.
• Restart the Windows store, right click and select the installed applications. Install all of the applications associated with the Microsoft Account, you already have installed (and want to install). Do this for each user.
• Configure Hyper-V to replace Virtual PC to virtual operating systems.
• Install a previously uninstalled like cell phone software, CPU - Z, EasyBCD software, etc. (as long as it supports Windows 8).
• EasyBCD allows to set up the dual boot or triple (most of our PC have MCE2005 (XP), Vista and Windows 7 on separate partitions or units).

I stressed step 20 above, because the technical support said they find that this step can make a significant improvement in the final Windows 8 upgrade results. Without the Windows 7 upgrade (repair) inplace before the upgrade to Windows 8, he said that they have poor results that require an update of the system to get things to work. By adding this step, step Live Essentials 2012 associated, by ensuring more 3rd third-party drivers are uninstalled, uninstalled all the 3rd party software that interacts with the hardware and all records are found in their locations by default, the upgrade process is apparently much more likely to result in a closing fully functional install Windows 8. Unfortunately, told me that they always have problems with some PCs, even after all the above, and that is why a new installation is always the best approach. They also said that until that antivirus makers improve their compatibility Windows 8 it is better to stick with the software antivirus from Microsoft that is built into Windows 8 and not install any AV 3rd party software.

Anyone have any additional suggestions or disagree with the installation steps above? Although it is a lot of work, if it is, it will be much easier than a new installation and I already spent 100's of hours trying to get Windows 8 to upgrade properly and 100's of hours trying to clean upgrades corrupt I end up with (with only partial success).

I have a total of 11 PC, I tried to upgrade to Windows 8 and so far I have 2 semi-functional updated of (with control parental does not not work and Windows 8 Apps doesn't work is not for non-administrator accounts). For the moment, I restored Windows 7 (reconfigured the Boot Manager to start Windows 7 instead of Windows 8) with the 4 other PCs ended up broke after trying to upgrade to Windows 8.

IT WORKED!

Finally, I updated 2 PCs from Windows 7 to Windows 8 with parental control and applications of Windows 8 works for all users and I didn't have to mess with security of folder or the registry, difficulty missing junctions or mess around with anything to get this working.  In addition, for the first time, I didn't need to perform a refresh and reinstall all software (programs and features shows 187 programs installed to a PC and the other has more than 200).  So far, looks absolutely everything works (even if I did have enough time to ensure that the reports of parental control and all safety features are 100% still works but it doesn't look like it will).

The bad news is that it took 8 hours to upgrade each PC because of the number of steps (compared to the hundreds of hours lost trying to get the previous corrupt Windows 8 updates work properly, it was easy).  In the future, I'll work on several computers at the same time to speed things up.  Upgrading Windows 7 on Windows 7 on-site took several hours alone, but I think that this step is crucial to get an upgrade of Windows 8 fully functional (Technical Support of Microsoft agent I talked to strongly recommended this step and said that it was necessary to upgrade his personal computer Windows 7 to Windows 8 also).

Now I have 9 PCs to go.  For PCs with a minimum software installed and with a rootkit, I will perform a new installation but the rest I'm going to use this procedure.

The next challenge is to get enough key to install Media Center on each of them.

• Download CS6 - New Installation

  I have the product key for CS6 and recently had to replace my hard drive and do not have an installation disc. Now I am unable to download CS6 Web design site Web from Adobe and the phone system says that adobe can't stand this version? I can install it on my new computer so I need to know where to download from. I have the activation code and everything, but not the program.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

• problems installing vRO 6.0.1 mac osx client.  Unable to connect to the welcome message after installation.

  I can't get the client to install on my mac and I'm running out of ideas as to what is happening.  The 5.5.2 client seems to work very well and if I broadcast the 6.0.1 client that also seems to work.  I can not get the local installation to run.  I always get the message "Unable to connect to host" when I try to run it.  If I go back to the 5.5.2 client it works fine and I can connect to my 5.5.2 instances.

  OSX version 10.10.2

  Version of Java 7 news 75 (at least that's the installer last ran, jdk installed 1.6.0 shows in /System/Library/Java/JavaVirtualMachines)

  I also see this error in the Setup log:

  Install uninstall: vRealize Orchestrator (install all components uninstall)

  Status: ERROR

  Additional notes: ERROR - uninstaller installation Error: java.util.zip.ZipException: error in opening zip file

  Because if this seems not uninstall it app works and I had to manually cancel the installation (which I might be leaving residues).  I manually remove the file .vmware to my directory and also remove ~/Library/Preferences/.com.zerog.registry.xml then by removing the orchestrator in the front applications folder directory to re-launch the client install.

  Paul

  Paul, please file an SR on your side. Feel free to reference the bug I introduced (1409281) when I had the same problem. Customer filed SRs help push resolutions

  -Burke Azbill

• Upgrade or new installation 5.0-&gt; 5.5

  Hi all

  
  

  We expect an improvement in our environment vSphere/UCS/SRM 5.0 to 5.5.

  Here's a matrix of current versions and the target.

  With the dependencies of the heart rate and SRM someone of experience with the upgrade path. (we understand that Heartbeat is be what EOL d with VMware)

  Are there advantages or disadvantages to do a new installation and migration of the ESXi hosts in this new environment?

  Thank you all.

  Component	Current version	Target version
  The UCS firmware	2.0 (3 C)	2.2 (1 D)
  Heartbeat	6.5	6.6
  vCenter	5.0 U2	5.5 u1
  Automatic deployment	5.0 U2	5.5 u1
  Update Manager (VUM)	5.0 U2	5.5 u1
  Syslog Collector	1.0.0	5.5 u1
  Empty the collector	1.0.0	5.5 u1
  SRM	5.0 U2	5.5.1
  SRA (for IBM UI midsize 7.3)	2.2.0.130422	2.3.0
  ESX	5.0	5.5 u1

  The link given Richardson was 5.5.

  There is a general link for 5.x, which is almost the same, but for 5. versions of x .

  VMware KB: update sequence for vSphere 5.x and VMware compatible products

  Deployment modules associated with vCenter as Auto, collector bucket etc. can be improved with vCenter. You will have to worry about only the most important.

  In any case, you must start with UCS. still, it is not disruptive. Make sure you have checked all connections before proceeding. If the failover does not occur at each stage (i.e. NIC FIS) you will find yourself in trouble and also the environment will go down.

• new installation of freezing on the tutorial?

  Someone at - he had problems with the 30 seconds "each photograph, camera, a lightroom" tutorial freezing and then unable to close or to use the program? This is a new installation

  Hello

  Please press the ESC key or try the Enter key, to ignore the video.

  Incase it does not work, please uninstall and reinstall Lightroom, it should help.

  Please let us know if it helps.

  ~ Sarika

• I just installed Lightroom 5.3.  New installation.  When I try to run the program it gives an error

  I just installed Lightroom 5.3.  New installation.  When I try to run the program it gives an error "the application could not start correctly (0xc000007b).  Click OK to close the program. »

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

  Should help!

• new installation on raid 10, error starting

  Hi, I would like to know why I get the message "initialization error" after a new installation of esxi 4.0. I chose the first installation disc (4 x 750). I should do something special before installation? Can I install a RAID 10?

  my server is DL160 G5p

  Thanks for helping me

  You do not have a supported hard drive controller. The controller does not hardware raid and requires software drivers to work. ESX (i) does not support these types of controllers. You can try searching through http://vm-help.com to see if there is that custom files that can help you get up and running.