New installation Windows 7 Home Premium

Similar Questions

• HP Deskjet F-4185 Installation (Windows 7 Home Premium SP 1 64-bit)-Center of Solution does not

  I can't reinstall the software/driver correctly on my laptop for Deskjet F-4185. I downloaded the drivers on the HP site and have installed several times (after uninstalling). I also disabled the software anti-virus during installation process. I run HP Print and Scan doctor and did all the troubleshooting steps.

  For now, I can print it, but scanning will not save as jpg files. When I click on the solution Center HP, the dialog box says that HP Solution Center cannot run because the device was not complete. He keeps asking to re - install from the CD or the original software.

  It is a new problem, because this printer work with this laptop since 2010. Kindly, advice because I have several documents to be analyzed in the form of pdf files.

  Well, you are probably right. I tried the uninstall L3 and had the same problem. Finally, at the end of my mind, I ran the disk e recovery on my laptop back to factory settings and installed the printer driver and software. Everything, including the Solution Center work!

• Please help me install the audio beats. Mine was lost after installation windows edition Home premium. Thank you.

  Product name: Pavilion dm1-4000au

  Product number: QG411PA

  Hello

  Download and install the IDT pilot on the link below - it should also install the Beats Audio interface.

  http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54236.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Windows 7 Home Premium OEM upgrade does not not after RAM upgraded FRO 1 GB to 4 GB

  New installation Windows 7 Home Premium 64 bit OEM worked the 1st time on workstation Dell Precision 380 (Pentium 4, 3.0GH, 1 GB RAM, Windows XP), so I registered with Microsoft.  PC worked too slowly, so I upgraded the RAM from 1 GB to 4 GB.  PC will not start now.  Nothing on the website of dell, or the PC manual led me to believe that there could be a problem.

  After I had already performed several tests, PC manufacturer said to install Windows 7 AFTER upgrading the RAM.  However, as the installation before the upgrade of RAM and joined already, can I now reinstall the OS without affecting the OEM license.

  You can reinstall Windows OEM on the same computer. Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  If you have trouble activating Windows 7 you can call Microsoft to activate it by following these steps:
  1. with the operation of Windows, click Start, then in the search box type: slui.exe 4
  2. press enter on your keyboard
  3. Select your country.
  4. Select the telephone activation option, then dial the given number and hold for a real person.

  For more details: http://www.sevenforums.com/tutorials/18715-activate-windows-7-phone.html

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Remote Desktop connection: Windows 7 Home Premium 64-bit connects to the computer of Windows XP VPN

  Hi all

  I am trying to establish remote desktop TO my new laptop (Windows 7 Home Premium 64-bit) on my computer (Windows XP) work via a VPN. The VPN Client connects to my network to work with no problems, but when I try to use the remote desktop connection I get an error message:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  Items 1-3 are working well, so I guess that the problem is caused by another issue?
  I'd appreciate any help.
  Thank you
  Lou

  Thanks for your response Al. To answer your qus:

  (1) cisco VPN Client for 64 - bit.

  (2) I don't know how to ping through the VPN tunnel - I don't see this option, anywhere in the Cisco customer (I'm not a professional, just a user)

  (3) Yes. Also, I can connect to the host PC via my old laptop XP (xp) of fine House, just not my new laptop (Windows 7 Home Premium) so the problem must be with my new laptop rather than at the end of the host PC.

  After that you connect through the VPN tunnel open a command window, IE. go in Start > run , then type cmdand type ping DRC-hostname or IP-address-DRC ping.

  Examples:

  Ping lou - pc

  ping 192.168.1.25

  FWIW, I have a desktop computer home wireless Windows 7 Home Premium SP1 64 bit on my LAN that connects fine to a XP Pro SP3 32-bit Wired test machine using [DRC] remote desktop. Now XP Pro SP3 DRC test machine is configured for a static IP address and I have manually configured the network mask, gateway, DNS resolves and made sure that NetBIOS over TCP/IP is enabled in the properties of the NETWORK Ethernet card on the test computer.

  Just for fun, I checked the hashes of file for the file mstsc.exe on the Win 7 Home Premium 64-bit machine and a machine Win 7 Home Premium 32 bit I have and hashes were a bit different as the size of the files. The versions of the files are the same though. I assume that the difference is because we're 64-bit to 32...

• Windows Shredder64.msi installer, either deleted or defective & not available to open new software. Windows 7 Home Premium

  Since July, Shredder Windows Installer fails to open new software and gives the msg of error indicating the component you are trying to use is on a network resource that is unavailable. "Try again or search under different file or car, etc.  Very frustrating and annoying.

  I am running Windows 7 Home Premium and have sought to the old version, which I believe was back in June, before 2011

  Disposer installation program has been damaged deleted o.  I also tried to download for free, but no luck.  I downloaded "installation programs," which were inefficient and apparently do not serve the same purpose to open the software.    I would like to restore the system, but do not go back to 2011, which is year bought the laptop.

  Advice or assistance appreciated!

  JudyB_729

  You're welcome, Judy.

  At any time, if you encounter error messages when you try the steps, please take note of the full error message and let us know.

• I have a new computer with windows 7 Home premium. just installed my Presentation adobe acrobat 6.0 standard, the installation as a warning code 20225 appeared? I also noticed that my residence PDF printer is missing? You can help me solve the problem. Br

  I have a new computer with windows 7 Home premium. just installed my Presentation adobe acrobat 6.0 standard, the installation as a warning code 20225 appeared? I also noticed that my residence PDF printer is missing? You can help me solve the problem. Bren

  Versions of Windows beyond Windows XP are not entirely compatible with Acrobat 6. The first version of Acrobat that is supported by Windows 7 is Acrobat 8.1 (is no longer licensed by Adobe). The latest version of Acrobat: Acrobat Columbia, six versions more recent than Acrobat 6. You need to upgrade to get all the features of Acrobat.

  -Dov

• New installation of Windows 7 Home Premium 64 bit on Sony VAIO key OEM

  Hi all

  I recently bought a Sony VAIO VPCEB27FA, who is essentially a Middle East of the EB series model. The PC is literally loaded with all sorts of versions possible assessment and bloatware and it absolutely killed any computing experience. Windows 7 starts at more than 3 minutes. Yes, I timed it actually to see how long it takes for Windows load up before you can start actually using my computer. My old gateway desktop which is in reality a P4 and has Windows 7 installed on it opens in less than 45 seconds and is good to go. So I definitely do a clean install on my laptop to clean up all the UNWANTED horrible. But can I use the Windows 7 key on the back of my laptop after a clean install? I go to download the English version of Windows 7 Home Premium 64 bit of Digital River. Currently, my laptop has the same version that is the English version of Windows 7 Home Premium 64 - bit as mentioned on this page from Sony

  http://www.Sony-Asia.com/product/vpceb27fa

  Thank you

  PS: - You can see for yourself on the page of Sony in the specifications of the software INCLUDED, how trialware and bloatware been installed by Sony on this machine. I hate Sony for this and I will never buy a VAIO again in my life.

  There is no need to separately download OEM or retail of Windows 7 RTM installation DVD ISO, as the release of Windows 7 installation can be easily converted using simply the correct product key (for example OEM_SLP product key can convert an installation of Windows 7 at retail in OEM version), as issued by the OEM product keys has a different basis of the retail product key. For ISO of DVD images, the only difference between a Windows 7 RTM retail ISO and ISO of OEM of Windows 7 RTM is in position of EI.cfg file [channel], which specifies the sales channel to retail or OEM.

• Satellite M40: installation of Windows 7 Home Premium

  Hello

  I am trying to upgrade my Satellite M40 (PSM40A - 03 K 009) for Windows 7 Home Premium, but towards the end of the installation, my laptop reboots and freezes you try to start Windows 7.

  I restarted in safe mode, and it seems to get stuck loading \windows\system32\drivers\classpnp.sys.

  I have tried everything I can think: Startup Repair running on the installation disc, install the latest versions of the drivers, update BIOS, disk reformatting, etc, but nothing seems to work.

  Can anyone help?

  See you soon
  Rob

  Hello Rob

  Please don t get me wrong, but this old notebook was designed for Windows XP Home edition. I imagine that you have problems with the installation of Win7, but I'm afraid that there is not much you can do about it.

  This laptop old models are not supported for Win7 and Toshiba will not offer some updates as the BIOS update. If you want to use the newer operating system probably you must also update your hardware. Maybe it's time for the new laptop computer. ;)

• Bluetooth doesn't work does not correctly after the installation of Windows Vista Home Premium Service Pack 2 (SP2) on Dell laptop

  I searched this forum and almost all resources on the net for days now nothing works.  Give the message to a thread more appropriate that I couldn't find one that is truly representative and am a newb at this.

  Summary of the problem: Bluetooth connectivity does not work properly after the window Vista Home Premium Service Pack 1 and 2 installation (SP 1 and 2).

  My system:

  Laptop Dell Inspiron E1705, 32-bit Winows Vista Home Premium SP2, Dell Wireless Bluetooth 355 Module + EDR 2.0

  * My system was purchased in 2006 with Windows XP, but was not entitled to a free Windows Vista Home Premium Upgrade I did. I installed Windows Service Pack 1 and 2 about a week ago.

  Problem: After downloading and installing the Windows Vista Home Premium Service Pack 1 and 2 (SP 1 and 2), my system does not recognize my Bluetooth (a touch of Sprint also) device known as the HTC Vogue.  I stress that I have not had any problems with this device before downloads.  I can't revert to the pre - SP State 1 and 2 because my system restore does not have these points more.

  I have read several posts on various sites about people having similar problems with Bluetooth connectivity after the Vista SP 1 and 2 facilities.  The problem is obviously the need for an updated driver.  I went to the site to download driver Dell and the Blueooth only updates available are the following. (Note: these drivers all date from 2006 and 2007).

  http://support.dell.com/support/downloads/driverslist.aspx?c=us&cs=RC956904&l=en&s=pub&SystemID=INS_PNT_P4_9400&os=WLH&osl=en&servicetag=&catid=-1&impid=-1&deviceid=12084&libid=5&typeid=-1&dateid=-1&formatid=-1&source=-1&releaseid=R159805&formatcnt=1&vercnt=1

  I had these installed before the SP 1 and 2 have been installed and they worked very well. After the upgrade, these drivers do not work.  They won't recognise BT devices.  I tried to upgrade the drivers by using update Broadcom suggested below it, but an error of following installation to contact Dell.

  http://www.Broadcom.com/support/Bluetooth/update.php

  I contacted Dell via e-mail and on the phone, but they want to charge me $60 for a one time service call just to talk about the problem because my warranty has expired. Provide updated drivers is not a problem of security in my opinion.  Even after explaining the situation, their continuous support to just send me the link to download Driver Dell above with out-of-date drivers.  I guess that's what they are charged to do, they do not have to admit a problem of compatibility.  This obviously the same link they would charge $60 to send.  I explained that I need just a Bluetooth Driver from Dell to at least version 6.3.   Needless to say, I will never buy another Dell product.

  On my end, I tried to uninstall my current drivers and then by installing a newer driver to support Gateway (Version 6.2.1.500 for and Acer).  This allows me to install some parts of this update and the update Broadcom. However, it is not a perfect installation and expires after about 90% saying "this update is not for this system" because it is the gateway not Dell to be provided.  Displays the version of the driver on my computer is Version 6.3.5.430 after doing this, but it is not a complete installation and some features are not available.

  Does anyone have experience with this issue? I would like to have a link with some bluetooth drivers generic Version 6.3 type which will allow me to use the Broadcom link to upgrade to the last version that works with Vista SP 1 and 2.

  Thank you for your help.

  Support FREE from Microsoft for SP2:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Home Premium new computer question

  Hello

  I have a question about whether or not I can reuse my Windows 7 Home Premium CD on a new computer.

  I checked several questions asked by users, and there are conflicting answers.

  I bought the product 4 years ago I think and used on a single PC that has recently had the mother go out. So I decided to buy a new integrated computer, custom, and I need to know if I can reuse my CD with Windows 7.

  There was an answer I have been see is that you can reuse the CD with Windows 7 on up to three computers at different times, but I would need to contact Microsoft to renew the activation key. Other responses indicated that only 1 product by PC and some up to three computers at the same time is possible.

  I need a clear answer, I am able to use my Windows 7 Home Premium CD on a new computer because my old one died?

  Depends on if it is OEM, full retail or upgrade.

  If OEM, it lives and dies with the first motherboard installed on.

  If it is upgraded, there must be a qualification in retail Vista or XP in order for him to be moved to another PC, even if the qualification does not need to be reinstalled first.  New installation with a Version of Windows 7 upgrade

  If it's full retail, it can move anywhere you want, as often as you wish.  If online activation fails, just use the telephone option and always reply that it is installed on a PC to pass.

• Can I install a new windows 7 Home premium and change the language?

  Hello

  I have a license for windows 7 Edition family premium, it seems that it is not possible to change the language of this one to a new (the Microsoft language packs are not provided for windows 7 Edition home premium) so I'm wondering is - it possible to install a new windows 7 Edition home premium (with current permit, but with a full installation by starting with a DVD) and choose another language from the begginingng?

  Best regards

  Saeed

  No, but you can use a copy of Windows 7 Home Premium in the specific language you need with your product key.

  http://support.Microsoft.com/kb/972813

  If this is not the case, see http://windows.microsoft.com/en-us/windows7/Add-or-change-an-input-language

  http://Windows.Microsoft.com/en-us/Windows7/products/features/language-packs

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-get-additional-display-languages

• Ultimate from Vista to Windows 7 Home Premium or professional clean to install the new SSD

  I put my turn to level. It came with Vista Ultimate. I bought an SSD that will become my c drive. I want to do a clean installation in each Windows 7 Home Premium or Professional 64 bit on this player.  My drive/d has a backup of the Vista operating system. My drive is resumed. Do I have to buy a new copy of version single charge? If so, how will I know the source of what I buy sells an authentic copy or download? If not, what are the steps I need to take to upgrade? There is a number on the back of the workstation that would allow me to do it with the new drive installed? I don't want to have non-essential files on the SSD.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  http://www.Amazon.com/Microsoft-Windows-7-8-software/b?ie=UTF8&node=1286119011

  If you choose to buy the upgraded version:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  Possible work around you can try:

  http://winsupersite.com/article/Windows-7/clean-install-Windows-7-with-upgrade-media-128512

• Microsoft Windows 7 Home Premium SP1 full 32/64 Bit x 32 & x 64 Version CD/COST NEW

  Dear community,

  I am currently running Windows XP Professional 32-BIT on my Lenovo Thinkpad T61.

  I want to upgrade to Windows 7. In doing so, so I bought, through another Web site, Windows 7 software. The product had the title description according to my 'title' for this post. Here is an excerpt from the page of sellers and a screenshot of their product.

  I should have done more research before buying the product. Now there's questions of concern if this was a legit purchase or not. Can someone help me please?

  For SALE: A brand new (as pictured) - Microsoft Windows 7 Home Premium full 32/64 Bit x 32 & x 64 Version CD / COST NEW. This is intended to be installed on a used / refurbished machines. It will install on any machine, if you perform a complete installation. It is not intended to be used as a resettlement on an existing operating system or installed upgrading. We only guarantee this article to install on a PC. We recommend that you do a FULL format and not quick format.  PHOTOGRAPHED

  

  Hello

  No, your motherboard is not replaced.

  If you purchase a retail of Windows 7 upgrade version, you will get a genuine Windows from Microsoft store.

  http://www.microsoftstore.com/store/msusa/en_US/list/CategoryID.63339300

  It will be useful.

• crashed hard drive... need help with original windows 7 Home premium 64-bit on new h.d.

  a win 7 64bits h.p... a h.d. failure... installed a new h.d. which had vista (sp2) h.p. on and I want my windows 7 back... is there anyway to give the product I.D. is on the side of my Tower for the microsoft 7 windows that has crashed and I would like to download a copy on the new hard drive? IM wondering if I need a proof of ownership or what anyone like that I bought from a friend's computer and its probably not in my name... I was wondering if this is a problem major and if theres nothing I can do... maybe download a new copy and just enter the product ID I don't know... IM really not too tech saavy... any help would be greatly appreciated... Thank you

  So what you want to do is put windows 7 to replace windows vista on your new hard drive?

  Step 1: Download the ISO file.
  You will need a cache of DVD or a USB flash drive (3 GB or better), if you insert a DVD, then it will ask you if you want to use it with a DVD player or a usb flash drive. Check the box to a DVD player or something similar to this. With a flash drive, you don't have to worry about setting up or anything.
  Download the ISO of windows 7 Home premium 64-bit.
  Here is the link:http://msft.digitalrivercontent.net/win/X17-58997.iso
  Be patient as it can take an hour to download on a medium speed wifi connection.
  Step 2: Burn the disk image to a DVD
  Now that you will burn the ISO on DVD once it's done. To do than go to where ever you downloaded the ISO on your computer and right-click on the ISO file. Now click on burn the disk image.
  Make sure your DVD is inserted. When asked what disc burner, select the drive that you inserted the DVD in. If you have only 1 DVD player you should have only 1 option. Now hit burn and go get coffee or something while you wait.
  Burn the image on a USB flash drive
  But if you don't have a DVD, you can always use a USB flash drive.
  You need to download Universal USB install 
  Now open universal USB install and it will ask you to choose a Linux distro. Keep scrolling down until you find "software based on other or non-linux".
  Select windows 7 Setup from there. Now step 2 hit browse and find where you downloaded the ISO image. Now, select your USB flash drive letter. It takes only 1 option. And click on create. And when it asks you if you want to format? Click Yes.
  DON'T FORGET TO BACKUP YOUR FLASH DRIVE PROBABLY ALL THAT FILES WILL BE DELETED IN THIS PROCESS
  Step 3: Boot from your DVD or USB
  Restart your computer, and while it loads the bios, it must be said somewhere boot options. And there will be a F1, F2, F3, or some F key to enter the boot options.
  After that, select the USB flash drive or a DVD drive to start. You will get to the windows installation and you can install windows 7.
  It will ask you your product key. It is in any way illegal.