New MBP and two raid 0 drives 4 GB 7200 rpm or replace a small SSD
Hello
I apologize if this in the forum somewhere. I'm looking for 4 hours through the posts and cannot find an answer to this question.
I ordered a new Macbook Pro products listed below.
MacBook Pro 15 inch with Retina display
- 2.8 GHz Quad - core Intel Core i7, Turbo Boost up to 4.0 GHz
- 16 GB 1600 MHz SDRAM DDR3L
- Storage 1 TB PCIe Flash
- Graphics card Intel Iris Pro + AMD Radeon R9 M370X with 2 GB of GDDR5 memory
In my research, it seems that the best configuration will add two additional discs.
I want to purchase the LaCie 9000601 robust Raid Thunderbolt. Its configured as a RAID 0 4 GB (2x2gb configured raid 0) read and write speed is rated at 240 MB/sec. For the third disc is there going to be any speed up if I did for one SSD drive with read and write speeds above 400 MB/s? If I won't see any significant speed I would make the 3rd disc an additional LaCie.
So the two configurations:
#1
C: 1 PCIe storage to Flash
D: drive for raid 0 4 GB lightning
E: drive for raid 0 4 GB lightning
#2
C: 1 PCIe storage to Flash
D: drive for raid 0 4 GB lightning
E: 500 MB SSD with reading and writing of at least 400 MB/s
I will mainly be 4K video editing from a 3 ghost drone. Most of the videos will need only some basic edition/transitions and possibly a color correction. I would like to modify in real time or near it and have always render as low as possible. I will be editing in Premiere Pro CS6 and could switch to CC.
I appreciate all the comments. If it not is not much of a difference, I would #1 configuration where it provides an extra 3.5 GB or storage and is cheaper at the same time.
Thanks for your comments and help.
Gary
It seems that the ghost 3 mp4/h264 files? These files will be slightly compact vs other formats, reducing the demand placed on the disc. LaCie rugged raid should operate correctly for the media to hold, and then you can set the project on the C: drive cache. If you work on small projects, you will be able to store everything on the flash disk and the backup to an external drive. If you want to keep on an external drive media, the DSS will provide faster response times to access the various elements when editing.
Tags: Premiere
Similar Questions
-
I don't know if it was just the misinformation on the Bestbuy description because it was a refurb or Speccy reading it wrong, but I just bought the refurb HP Pavilion Slimline s5610f was supposed to have a 7200 RPM HARD drive according to everything I read.
This is the profile for HP http://h10025.www1.h...R1002_USEN#N455
Here is the description of BB http://www.bestbuy.c...da914375cf8en02I looked around and everything indicates that the device of WDC WD64 00AAKS-65Z7B0 as being 7200 RPM SATA drive. Speccy also lists it as a 2 MB cache, which I don't think is correct, should be 16 MB, but I'm not too sure.
Any help would be appreciated, as other ways to identify the number of towers disk and memory cache.
Also wonder about this part of the form: data C7 Ultra DMA CRC Error Count 200 (177) 0000000019
Who's 19 errors for the duration of the training?
Of Speccy:
Hard drives
WDC WD64 00AAKS-65Z7B0 SATA drive
Manufacturer Western Digital
Business Unit / Desktop/WD Caviar® brand
TR/MIN/Buffer Size or attribute 5400 RPM with 2 MB of cache
Heads of 16
16383 cylinders
Type II-SATA 3.0 GB/s SATA
Type of appliance fixed
ATA Standard ATA8-ACS
LBA 48 bit taken in charge
Serial number WD-WCASYF167563
Interface SATA
625 GB
full size 640,135,028,736 bytes
Zero Type RAID
S.M.A.R.T
01 Read Error rate 200 (200 worst) features 0000000000
03 spinup Time 162 (162) data 0000001324
04 start/Stop Count 100 (100) data 0000000020
05 reallocated sectors to count 200 (200) data 0000000000
07 seek Error Rate 100 (253) data 0000000000
09 hours (POH) powered 100 (100) given 000000001 B
Spin Retry Count 0 to 100 (253) data 0000000000
Attempts to recalibrate 0 b 100 (253) data 0000000000
0c device Power Cycle Count 100 (100) given 000000001 has
C0 Power-off retract count 200 (200) data 0000000007
C1 Load/Unload Cycle Count 200 (200) data 000000001F
C2 Temperature 118 (109) data 000000001D
C4 number of events of reassigning 200 (200) given 0000000000
C5 Current pending sector count 200 (200) given 0000000000
C6, Incorrigible sector County 100 (253) data 0000000000
C7 Ultra DMA CRC Error Count 200 (177) data 0000000019
C8 write error rate / multi-zone error rate 100 (253) data 0000000000
Temperature of 29 ° c.
OK (less than 50 ° C) temperature range
Good condition
Partition 0
Disk #0 Partition #0 partition ID
Size of 100 MB
Partition 1
Disk #0 Partition #1 partition ID
C: drive letter
NTFS file system
Volume serial number E4AF596B
584 GB dimensions
Used space GB 30.5 (6%)
Free space GB 554 (94%)
Partition 2
Disk #0 Partition #2 partition ID
Letter from D: drive
NTFS file system
Volume serial number 829DB1F3
12.1 GB size
Used 10.6 GB of space (88%)
1.47 GB of free space on the (12%)Ask yourself why the unit was refurb can be intimidating. It's only cicra July2010.
You perform these maintenance issues:
Checkdisk http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/
scannow http://pcsupport.about.com/od/toolsofthetrade/ht/sfc-scannow.htm
-
CS6 mobile to a new laptop and an external hard drive
My old macbook pro is close is dead, so I bought a new macbook, however, I don't really want to have my CS6 apps on the phone, but want to have on an external drive and work outside that. I tried just moving them and their open the reader plugged into the new macbook, but it don't like it and asked me to reinstall.
No idea how to move these applications, so I can reuse them?
Thank you
You can't run Adobe software from an external drive. The software must be installed on the same drive as the system software.
-
I have a new MBP and can't find Hello - where can I get it?
I have Yousemite 10.10.5 but no Hello never installed. Do I need? Where can I find it?
Hello is not an application - it is a facility built into OSX which allows networking with a minimum of installation.
From Wikepedia:
"Hello is the implementation of Apple without configuration networking (Zeroconf), a set of technologies, which includes the discovery service, address assignmentand host name resolution." Hello looking devices such as printers, other computers and services that offer of these devices on a local network using Multicast Domain Name System (mDNS) service records.
The software is integrated with the operating system OS X and Apple's iOS . Hello can also be installed on computers running Microsoft Windows. Hello components can also be included inside other software such as iTunes and Safari. "
You have asked about it in the forum of Windows Hello - it is available for download for Windows, but it's not relevant for you that you have a Mac.
-
Transfer the library to new MBP of old MBP with music on an external hard drive
I bought a new MBP a few months ago and have not had time to properly set up immediately. I finally get to it and have met some problems with my iTunes library transfer and re-use of my music files on an existing external drive. I always kept my music files on a separate drive in order to keep the laptop drive as empty as possible for other tasks.
News old MBP:
OS x 10.6.8
iTunes 11.4
Library was on the hard drive of the MBP
Music files were on an external drive, called 'LACIE_MINI '.
New Intel MBP:
10.10.5 OSX
iTunes 12.3.2.35
I copied the old iTunes library to the same location on the new MBP and he watched the iTunes. Load library very well however, even if the LACIE_MINI drive is connected to the laptop, the files cannot be located in iTunes. When looking for the location of the file under 'Get Info', it points to the correct place (file://localhost/Volumes/LACIE MINI/music /
/ -
2 new MBP - best installation order? Running a virtual machine in a training camp?
I have the arrival of two new MBP. I had some pretty mixed feelings about VMWare fusion - I used it for 3 years now on my MBP de Santa Rosa. I ended up kind of give up on this and have been broadcast on Win 7 in Bootcamp for the last year.
Last week I tried to open Bootcamp Win7 molten - he worked thereafter, but I ended up getting a Windows 7 not genuine message. I have authorized successfully, so the next time I have bootcamp I had to re - authorize again. I know that this does not - as I have had to work a bit then only a few years - but it seemed to me that it was important to the order of installation.
I want to have Win 7 will work perfectly via Bootcamp and Fusion. I have a brand new MBP - and an ISO of Windows 7 Ultimate (with license company/serial number). I intend to buy an another two licenses of Fusion (I suppose I'll have everyone - even if the old notebook is abandoned (is on v2), so it would be nice to be able to transfer it to my new.) I did not need to transfer the software or settings of the old laptop - I'm happy to have a fresh (and own) start...
It would be easier to install merge, then install Windows 7 with a fixed (pre-allocated?) size (I expect 400 GB). I can then transform this VM of the merger in a bootcamp partition?
I would like to avoid burning a disc - and I think that if I do a bootcamp, first of all, should be a disc. If I need to do, can anyone recommend an ISO burning tool? It seems to be good at making coasters while I tried before...
Install Windows 7 via Bootcamp first, then use the tool on the homepage of the library Virtual Machine to make a Boot Camp virtual machine. Going virtual physical is not as easy to p2v. Of course, the best option is to go down v2 and get the latest version (3.1 as of this post).
Regarding burning, disk utility should be fine. The open, press Burn, choose image Win7 you have and then pop in a blank disc DVD-R or DVD - RW and you will be fixed.
-
Just bought a new laptop and need your advice!
Hello. I bought this mobile workstation to change while I travel. Please let me know if I've made mistakes with my selection of material. Or if I could improve it more. I've mainly use for editing with first CS%.5. Rendering with Adobe Media Encoder, and using After Effects.
Thank you
Dell Precision M6600 Mobile Workstation
Dell Precision M6600 grey aluminium
Intel Core i7-2760QM processor (2.40 GHz, 6 M Cache)
Energy Star 5.0 / EPEAT Gold
17.3 '' FHD (1920 x 1080) with PremierColor IPS RGB glare, backlit by LED technology
Standard palmrest without fingerprint reader & contactless smart card reader
Application for camera - Kit
Back cover of the LCD screen LCD - RGB
Integrated FHD (2MP) Webcam with digital Microphone - RGB LCD screen
Plant shipping information
System pilot, Precision M6600
Update the Dell Client system
Reference Dell Feature Enhancement Pack (DFEP)
Regulatory label for Non touchscreen systems
The guaranteed Australia fact sheet
Shipping system, Mobile Precision M6600
(English, Indonesian, Thailand, Cambodia) end user license agreement
Win 7 Info Label
Intel (r) Core i7 vPro (TM) processor label
Camera software
Contains resources DVD - Diagnostics and drivers
Documentation, Precision M4600/M6600 (English)
16 GB (4x4Go) 1333 MHz DDR3 SDRAM
512 GB (SATA3) mobility Solid State Drive
Windows Live Essentials
8 X DVD +/-RW Slot Load Drive
Drive bezel - DVD +/-RW Slot Load optical
CyberLink PowerDVD (TM) 9.5
Roxio (R) Creator Starter Media Kit
Roxio (R) Creator Starter
CyberLink PowerDVD (TM) 9.5 Media Kit
Power cord (ANZ)
3-year warranty, battery 9-cell (87Wh)
Information integration
Order ready Tag ProSupport
IF EMEA DELL LOAN MOD INFO
IF, MOD, INFO, CSR, ELIGIBLE
DRC Service tag
NVIDIA Quadro (R) 5010 M with 4 GB of GDDR5 memory
AC adapter 240W
Intel Centrino Ultimate - N 6300 (802.11 a/b/g/n) Half Mini Card
Backlit keyboard (English) internal double score
Genuine Windows 7 OS Label
Windows 7 Professional COA Label
Windows 7 QFE
FYI ONLY: Genuine Windows 7 Professional 64 - bit (English)
Genuine Windows 7 Professional 64-bit (English)
Windows 7 Professional 64 - bit Media Kit (multi-language)
Access to Data Protection Dell (TM)
Intel vPro Technology Advanced Management Features
Reference Dell Backup and Recovery Manager (DBRM) V1.3 for Windows 7
No required Installation Service
Technical support
E-waste compliance
# Warranty: Year 2-3 (NBD)
# Warranty: Year 2-3 (POW)
# Warranty: First year (NBD)
# Warranty: First year (POW)
Enterprise-wide contract: 7 x 24 Technical Support & Assistance: 3 years
3 yr overall contract: next business day on-site Service
Package: NBD Onsite Service, 3 years
All hard drives, RAID configuration
Battery door guaranteed 1 year from the Date of the invoice (unless, of course, select guaranteed 3 years battery is
bought)
Visit http://support.dell.com/prosupport for technical support.
Charges (Australia) NB-OS-CTO handling & insurance
Precision (TM) delivery Charges (AUSTRALIA)
If you have a 128 GB SSD boot and a second drive internal SATA 7200 RPM, you can get for your application and be able to work 30 to 50 minutes without a wall outlet. I would start there and if it's too slow, then consider adding an eSATA drive, but then it takes a wall outlet. I can't say that you NEED a third disc, you will need to determine than yourself and weigh speed advantage against either subordinate to a wall outlet for the juice.
-
Is it possible to upgrade the Satellite A100-906 with 160 GB 7200 RPM HARD drive
Hello guys,.
First of all, I would like to congratulate all the people here for their good advice.
As for my question, I want to upgrade my HARD drive. I have the laptop A100-906, which has a drive HARD 100 GB 5400 RPM Hitachi.The hard drive, I would like to buy, is also Hitachi but with the highest capacity (160 GB) and RPM faster (7200 against 5400).
I wonder, if my laptop supports this drive and if I have problems with temperature and noise, because the HARD drive runs at 7200 RPM.To summarize the above, is it really useful to replace my old 5400 RPM HARD drive to a new 7200 RPM?
Should I buy a new one with 5400 RPM to avoid having problems of temperature and noise?Please let me know your opinion and thank you in advance.
STLHello
As you already know we can only speculate on the size of the HARD disk
In my opinion the 160 GB would be possible. But it s just my personal opinion.In any case, the higher speed (7200 RPM) HARD drive should be a problem. I noticed that many laptops use 7200 RPM HDDs and 5200 RPM. So I imagine that the heat produced by the HARD drive shouldn't t increase the level of temperature at a critical level.
Greetings
-
New MBP affected by frequent kernel panics and crashes application
New MBP affected by frequent kernel panics and application crashes.
If anyone can identify which can cause a kernel panic, I would be very grateful. Latest kernel panic today documented report below
I already finished the Apple data download procedure with an analyst, and she communicated its engineers did not respond with anything out of the ordinary, but something's not someone. I have also reinstalled the operating system twice. Sincerely appreciated.
OS X 10.11.3
MacBook Pro (retina, 13 inches, early 2015)
2.9 GHz Intel Core i5
8 GB 1867 MHz DDR3
Intel Graphics Iris 6100 1536 MB
SN: C2QQ505FGKJN
=========START===================
Anonymous UUID: 02C55208-70BF-B4CC-FA7C-EE0BDA6D81FC
Fri may 6 13:24:41 2016
Panic report *.
panic (the appellant 2 cpu 0xffffff801af6829c): has no validity mbuf: mbuf 0xffffff811ea9dc00 len - 13 type 1 flags 0 x 2 data 0xffffff811ea9dcb6 rcvif 5 ifflags 0 x 8863
Backtrace (2 CPU), Frame: Return address
0xffffff8124bc3e20: 0xffffff801acdf792
0xffffff8124bc3ea0: 0xffffff801af6829c
0xffffff8124bc3f60: 0xffffff801af6aea9
0xffffff8124bc3fb0: 0xffffff801adccf77
Corresponding to the current thread BSD process name: kernel_task
Mac OS version:
15 D 21
Kernel version:
15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64
Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C
Slide kernel: 0x000000001aa00000
Text of core base: 0xffffff801ac00000
Text __HIB base: 0xffffff801ab00000
Name of system model: MacBookPro12, 1 (Mac-E43C1C25D4880AD6)
Availability of the system in nanoseconds: 98155089309514
last load kext to 90992427425984: com.asix.driver.ax88772 1.4.0 (addr 0xffffff7f9d833000 size 61440)
Finally unloaded kext to 90128671005251: com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1 (addr 0xffffff7f9be69000 size 32768)
kexts responsible:
com.asix.Driver.AX88772 1.4.0
jp.plentycom.driver.SteerMouse 4.2.6
8.2 com.microsoft.driver.MicrosoftMouseUSB
8.2 com.microsoft.driver.MicrosoftMouse
com Apple.filesystems.smbfs 3.0.0
com Apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 110.20.22
com.apple.driver.ApplePlatformEnabler 2.6.0d0
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleGraphicsDevicePolicy 3.7.7
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleHDA 272.51.3
com Apple.Driver.pmtelemetry 1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleIntelBDWGraphics 10.1.2
com.apple.driver.AppleBacklight 170.8.8
com.apple.driver.AppleLPC 3.1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4
com.apple.driver.AppleSMCLMU 208
com.apple.driver.AppleMCCSControl 1.2.13
com.apple.driver.AppleIntelBDWGraphicsFramebuffer 10.1.2
com.apple.iokit.IOBluetoothSerialManager 4.4.3f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.AppleCameraInterface 5.41.0
com.apple.driver.AppleThunderboltIP 3.0.8
com.apple.driver.AppleUSBCardReader 3.7.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0
com.apple.BootCache 38
2.8.5 com.apple.iokit.IOAHCIBlockStorage
com.apple.driver.AppleAHCIPort 3.1.8
com.apple.driver.AppleTopCaseHIDEventDriver 86
com.apple.driver.AirPort.Brcm4360 1020.17.1a1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 4.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 4.0
com.apple.driver.AppleAPIC 1.7
com Apple.NKE.applicationfirewall 163
com Apple.Security.Quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.usb.AppleUSBHub 1.0.1
com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1
com.apple.driver.IOBluetoothHIDDriver 4.4.3f4
com.apple.iokit.IOUSBHIDDriver 900.4.1
com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1
com Apple.kext.Triggers 1.0
com.apple.driver.DspFuncLib 272.51.3
com.apple.kext.OSvKernDSPLib 525
com.apple.driver.AppleGraphicsControl 3.12.6
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOSurface 108.0.1
com.apple.driver.AppleHDAController 272.51.3
com.apple.iokit.IOHDAFamily 272.51.3
com.apple.iokit.IOAudioFamily 204.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.IOPlatformPluginFamily 6.0.0d7
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4
com.apple.driver.AppleSMBusController 1.0.14d1
com.apple.AppleGraphicsDeviceControl 3.12.6
com.apple.iokit.IOAcceleratorFamily2 205,1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.CoreCaptureResponder 1
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.iokit.IOSerialFamily 11
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7
com.apple.iokit.IOUSBMassStorageDriver 1.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7
com.apple.iokit.IOBluetoothFamily 4.4.3f4
com.apple.driver.CoreStorage 517.20.1
com.apple.iokit.IOAHCIFamily 2.8.1
com.apple.driver.AppleThunderboltDPInAdapter 4.1.3
com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleHIDKeyboard 181
com.apple.driver.AppleMultitouchDriver 304.10
com.apple.driver.AppleHIDTransport 5
com.apple.driver.AppleHSSPIHIDDriver 41.7
com.apple.driver.AppleThunderboltNHI 4.0.4
com.apple.iokit.IOThunderboltFamily 5.1.0
com.apple.iokit.IO80211Family 1110.26
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com Apple.Driver.corecapture 1.0.4
com.apple.driver.AppleHSSPISupport 41.7
com.apple.driver.AppleIntelLpssSpiController 2.0.59
com.apple.driver.AppleIntelLpssGspi 2.0.59
com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1
com.apple.driver.usb.AppleUSBXHCI 1.0.1
com.apple.driver.AppleIntelLpssDmac 2.0.59
com.apple.iokit.IOUSBFamily 900.4.1
com.apple.iokit.IOUSBHostFamily 1.0.1
com.apple.driver.AppleUSBHostMergeProperties 1.0.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com Apple.Security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 417.2
com.apple.iokit.IOStorageFamily 2.1
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 4.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com Apple.KEC.pthread 1
com Apple.KEC.corecrypto 1.0
System profile:
Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 133), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)
Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports
Bus crush: MacBook Pro, Apple Inc., 27.1
Memory module: DIMM0/0 BANK, 4 GB DDR3, 1867 MHz, 0x80AD, 0x483943434E4E4E424C54414C41522D4E5544
Memory module: DIMM0/1 BANK, 4 GB DDR3, 1867 MHz, 0x80AD, 0x483943434E4E4E424C54414C41522D4E5544
USB device: USB 3.0 Bus
USB Device: Card reader
USB Device: USB Bluetooth host controller
USB device: USB 2.0 Hub
USB device: AX88772C
USB device: Microsoft¬ae Comfort Mouse 4500
Serial ATA Device: APPLE SM0512G, GB 500,28 SSD
Model: MacBookPro12, 1, MBP121.0167.B16 of BootROM, 2 processors, Intel Core i5, 2.9 GHz, 8 GB, MSC 2.28f7
Service network: Ethernet, 2 USB, Ethernet, 5
Network service: Wi - Fi, AirPort, en0
Graphics card: Intel Graphics Iris 6100 6100, integrated Intel Iris graphics card
Rid the MBP asix device and files and see if the panic stop.
Ciao,.
-
Hi I had CS 5.5 Student edition (download no CD), but then the hard drive of my computer is dead. My computer has been "fixed", but was completely wiped out. I bought a new computer and want to download again - one question - I can't find a way to download the edition of students anywhere on the site, do I just download the normal edition? Two - question because my computer was wiped out how to uninstall / disable one I already downloaded? Because you get only 2 total downloads is that correct? I want to
Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
Concerning
Megha Rawat
-
Hi-
I just used Migration Assistant to transfer my account (including Fusion) of my old MBP to my new MBP. My VIsta 64 - bit VM Fusion is and resides on an external HARD drive. so, after the migration successful (apparently) I connected the external drive to the new machine and (ii) grown up merge. Fusion has seen the virtual machine, I selected to motorise the. Merge request now:
Did you move this virtual machine, or you copied it?
It seems to me that I did, nor as the volume disk external DRIVE containing the Vista VM was not mounted at the time of migration (in fact, the drive has been disconnected). I copied the platform, including the Fusion, from one physical machine to another.
I know this is probably an easy answer, but I don't want to blow up this very important step in getting my new machine, running and functional. ?:|
Help!
Instant wrote:
Thus, it is "moved", even if no bit VM have been transferred or altered in any way and the virtual machine remains resident in the same volume on the external hard drive?
Yes, it's "I moved it" in order to maintain the same UUID and MAC address, which should keep the machine virtual Windows FRO Windows Product Activation trigger.
Now to the other...
As I pointed out in the original post, and you noted in your response, I transferred Fusion to the new machine (for the internal HARD disk) via the Migration Wizard. What should I do now? Uninstalling merge on the new machine, and then download and reinstall? (I'm on v2.04; I guess I would upgrade comes in support of w/SL v2.05...) ? Or NOT uninstall but rather update to v2.05 (easier)?
I run the uninstall and then install Fusion 2.0.5. (Note: Fusion 2.x is not a dynamic update) Uninstalling/reinstalling also Fusion will not delete your Virtual Machines.
-
Transfer files and settings to a new MBP
When transferring files and settings from my current MBP to a new MBP, this also automatically will install all the applications installed on my MBP on my MBP again? Also, I run Parallels and Windows on my current Mac and I was wondering if I could transfer these licenses on my new Mac, or do I pay for the new licenses?
If yo select this option to copy all the information on the new Mac applications is also copied. You may need to bury your license number for Parallels.
-
I have the old hard drive in a USB enclosure and connected to the computer again. I have installed firefox and you need to have the address book (critical) copied and inserted information from address book on the new computer. I hope that there is a file I can replace easily?
Firefox send an e-mail, it's strictly a web browser.
If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.
If your problem is with Mozilla Thunderbird, check out this forum for support.
https://support.mozillamessaging.com/.../home
or this one
http://forums.mozillazine.org/viewforum.php?f=39 -
My motherboard went bad on my old computer, but the hard drive was OK. I bought a new computer and plugged my old hard drive to it via a usb adapter. I would like to import or copy my favorites from the old hard drive to my new, but I can't find where they are. I was unable to determine the search for articles on the web. Be advised that my old hard drive is basically nothing more than a place of storage for files at this point. My old operating system is windows XP, and my new system is Windows Home Premium.
https://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile
Your old profile is located here in Win XP and W2K:
drive: \Documents and Settings\username Windows login\Application Data\Mozilla\Firefox\Profiles\profile_name -
Just installed Firefox 9.0.1. When you open a new browser session, two tabs will open. One is my home page, and the other is a home page of Firefox. I want to just my home page to open. How do I get there? Thank you.
See the following for a few suggestions:
- https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
- https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol
- http://KB.mozillazine.org/Preferences_not_saved
Maybe you are looking for
-
Shadow/progressive distortion to the right
my screen shows a shadow/distortion right at all on my screen. I have reset the monitor and display vista setting. Still, the shadow. I don't have a shadow when I saw my pictures. There is no shadow when I run movies or playing games. I have vista h
-
With the help of SBH52 while loading
is that it damaged the battery of the headset if I use it while charging?
-
You can add a program to return to the list of "programs" in the Start Menu?
How to place a return on the 'Programs' menu program / registration? I accidentally move and now I can't replace it where it was originally (in the accessories section). I put in the system 32 file is not so accessible. Help!
-
Online drawing circle does not not in OpenGL ES1.1
In my project, I want to draw a line with a cirle of his corner side. But I do not get my desired output. Here is my sample code- glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); enable_2d(); glEnable(GL_BLEND); glBlendFunc(GL_SRC_ALPHA, GL_ONE_MI
-
Call Oracle procedure with variable
Experts,I pass arguments through script to Oracle procedure, use the input value and pass to the procedure.Oracle procedure Gets the input value, run the query, and all connect to the log file.I am facing a few challenges, seems to be the error of sy