New Member - easy question

Similar Questions

• New Member has exactly * a * problem for a long time with system! ***

  first of all, I want to say hello to everyone... I just registered today... actually I just discovered today these forums exist even ;^>

  Features: 6 months ago I bought a HP Pavilion a6600f... I love it and have bought things for her from the beginning... find it me easy to use and * beep * hard to turn off ;^> I always check to make sure that I have the latest drivers for everything, cleaning the registry, etc..

  I had exactly * one * problem for the last few months and it's bugging me enough now to do something.

  System details: the bureau a6600f Pavilion has a Pentium dual core E2200 clocked at 2.2 GHz... I put 4 GB of memory in it, and it runs Vista Home Premium w/Service Pack 1 (64-bit).  the rest is probably not important to this question.

  QUESTION: when I opened the health security & in the hp Advisor, I always have yellow exclamation in a triangle "PC Update," and also a exclamation point red in a square under "PC Health".  both are caused by the same problem... the fact that I continue to say there is a new version of the "HP health check' and I need to download/install.

  problem is that I can't do.  Here is what I get.

  at first, everything seems fine.  He considers it, download it (it's about 13 MB), and I get the message 'the active support HP library configure your new installation of the software.  * That's * where the problems begin.  I get:

  «HP Active Support Library error: Error 1316.» "A network error occurred while trying to read him comes from the file C:\windows\installer\HP Library.msi of active support" (note: I checked and I don't even have this file present in C:\windows\installer... that's the problem?)

  then I get "roll back the installation.

  and finally, "error:-1603 Fatal error during installation."  Consult the help of Windows Installer (msi.chm) or MSDN for more information"

  so I can't update the HP health check and I still have these two errors (the yellow triangle and red square) present in HP CAW - PC Health & Security.

  I searched these forums and found a few issues related to the CAW of HP, and I understand that some people even turn off... but it never gave me a problem outside of it, and I want to keep around if I can.

  I'm sorry if this post is on the long side, but I wanted to provide as much information as I could.

  so, my name is Michael King and I hope to be a regular contributor here, and I don' t mind if someone wants to email me, although I understand problems of this kind are better publicly displayed where they benefit from the community as a whole.

  Thank you

  -MK

  Message edited by Michael_King on 05/16/2009 20:06

  first of all, I would like to thank the three of you who tried to help me with this problem.  This means that you, dmhoo29, anon, MrFixIt.  and as a gesture of goodwill, I would like to give Kudos to you, being a new Member and all three.

  you all had great suggestions, and based on these suggestions, I tried a few variations based on these suggestions.  Unfortunately, nothing has worked... She is always back to the same error messages, no matter what I did.

  In fact... HP * own * suggestion... which is essentially reproduced in this thread... does not work either.

  I had already spent hours on this ridiculous thing, and tonight I spent 3 hours on the subject.  I finally solved it, and the solution may benefit others who I see can easily run through a similar problem with other improvements... BECAUSE THE PROBLEM IS A RIDICULOUS OVERSIGHT ON THE PART OF HP that we can correct easily manually.

  THE SOLUTION

  What annoyed me early on, was the fact that I kept getting the message about the "HP Active Support Library.msi" file, which was looking for the installer in C:\Windows\Installer.  It seemed to me that the real problem was that he was looking for a file that simply wasn't there.

  Well, during my hours 3 screwing around with tonight, guess what I found?

  There's a right called "swsetup" subdirectory under the root of the C:\ drive.  and inside C:\swsetup, I found the following two subdirectories:

  C:\swsetup\sp36082 - and -.

  C:\swsetup\sp41377

  I knew of the many, many times I tried update HP Health Check that he was downloading sp41377. (don't remember the extension) via FTP from HP.  so I checked what was in C:\swsetup\sp41377 and guess what I found?  Well, a few things, but the only thing that concerns us is (drum roll please) THE FILE "HP ACTIVE SUPPORT LIBRARY. MSI!

  simply, I opened another window, surfed to C:\Windows\Installer and drag-and - drop "HP Active Support Library.msi" here (I pressed the 'Ctrl' key in order to make a copy of it rather than a civil rights movement).

  so now I had this annoying file in the right directory.  so, since my C:\swsetup\sp41377 window was still open, and since there is a file 'setup.exe' in there, I ran it.

  and the Holy Mother of God, it has actually worked.

  which means that what had happened was, when I tried to update the health check, that would create a subdirectory in C:\swsetup... in this case the C:\swsetup\sp41377 subdirectory... all he needed for the update here... and then ran "setup.exe" dump...

  . . except that the HP person who wrote 'setup.exe' forgot to include an itty-bitty statement in the code...

  to copy 'HP Active Support Library.msi' in the C:\Windows\Installer directory first.

  then pay attention to that sort of thing, my friends... If you try to update this HP wrote and that you get a 'cannot find file such and such in such and such directory' type of error msg, see if you can locate on your hard drive... maybe in C:\swsetup, perhaps elsewhere, I know... and if you find, just manually copy it in the required directory and run Setup again.  This might be the only time where HP committed this Sin right; ^ >... or even once, it cannot!

  Bravo and thank you again to all who have contributed.

  -Michael King

  Message edited by Michael_King on 05/17/2009 23:37

• Hello, new Member! Q:lower power processor for IBM G41?

  Hello all, new Member here!

  A good friend gifted me an IBM Thinkpad G41(#2881) in excellent condition, and it uses a processor MHz Celeron D 2.53.

  I think it uses a processor of type "office" and wants to replace it with a smaller power, keeping the same speed, FSB, etc..

  This may be to ask the 'impossible' (I think that the CROWD support than he came with) but it can't hurt to ask, and this forum seems to be the best place to ask.

  I think there are two versions of the G41, Celeron D has a smaller MOB that hides the Pentium 4 (?), please correct me if I'm wrong.

  All suggestions are welcome, but I really need to know if someone did, (I don't have to blow a working machine!)

  Any "electronic" issues relating to these forums, I will gladly try to answer!

  Thank you for your time and consideration!

  Mark T.

  Welcome to the forum!

  All G4x series units use full desktop processors and will not accept the classic laptop processors. Power efficiency is not something they are known for...

  You will need to swap the Board to allow the use of the high-end Pentium 4 HT processors that were available on some units G41.

  Is this useful? Not in my book - and I love G series ThinkPad. In all fairness, Celeron D does nothing to sneeze, and these machines can very usable today with some upgrade in the areas of the RAM and hard drive...

  Good luck.

• Easy question

  When file sharing / information wirelessly between the computer connected to my network via my home wireless router, not information trip computer to the router to the second computer or information travels from computer to the router via the modem and then return via the modem to the router and then to the second computer?  I hope that it will be an easy question for someone.  Thank you.

  File on your network as you transfer the describe does not mean the modem, router and computer, any computer.

• Add new Member and firmware update

  Hello

  I have a group of 4 bays Equallogic

  1xPS4000 (Type: 70-0120) and

  3xPS6100 (Type: 70-0400)

  They all firmware v6.0.4

  The new table is a PS6210XV. I'm sure that the firmware of it's newer probably with a release v7.x.

  The documentation for the firmware update, it says that I have to upgrade all the tables on my group first, and then add the new group.

  I was hoping to add the new table and move some of the volumes to that one, update a table that I emptied, add back to the pool, empty one another etc etc.

  Is this possible?

  It is really not a good idea to do so.   In place upgrade is by far the best option.  If you have defined your timeout of 60 seconds and choose a period of quierter I/O, that there should be no problem.  Also, be ready for an upgrade means that be ablel to handle a failure of the controller in the case of a real problem of HW.

  First, if.  You need TO upgrade the new Member and all members of 6.0.x to 7.0.9.   The new table will come with 7.0.x since it is the minimum version for this controller.  Upgrade to 7.0.9 as well.  Create a new pool for this member and do not set the RAID policy yet.  Do not enable the iSCSI 2nd course interface.

  What disks you have in the existing tables?

  You run VMware ESXi?

• Not able to see the new Member shared alternative hierarchy on Smart view

  Hello

  I had to make changes on the replacement as a hierarchy below:

  1 created shared member on the new roll upward with Member Shared Property (replacing Hierarchy).

  2 removed the former member under the other roll upward.

  3 refreshed the Hyperion, planning of database.

  4 could see the new Member roll up on the alternative hierarchy after refresh.

  Now, when I try to extract data from the new hierarchy of alternative, I'm not able to get the data that I get the error message like "Invalid Grid - size XXXX member is located at the wrong location".

  I choose the option 'selection of members' members, but the grid is not valid when I try to extract data on smartview.

  Have I missed any step to make changes on the planning? I checked from myside to display the shared member on Essbase after updating of the planning application.

  Can you please help me in fixing the issue?

  Thank you.

  VERP.

  Thanks Dan.

  Tried to build the new sheet, and I was able to run successfully. Members have been placed wrongly and could fix it.

• Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  Adding a new license for a new Member, but may not use programs. Saying licensing issues... any advice?

  You use the Enterprise Dashboard?

  If so

  1. ensure that they use the correct ID type. So if they have been added to the dashboard with Enterprise or federated ID to ensure they do not use the Adobe ID or vice versa.

  2. bring to sign out and sign back in to check their eligibility.

  3. If the problem persists, then try this:

  The opm.db file contains the login user cached information and delete this file is a useful troubleshooting step. Once deleted a fresh file will be automatically created when you start creative cloud and reconnect.

  1. Close the creative cloud application.
  2. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  3. Delete the file opm.db.
  4. Launch the creative cloud.

• I am a new Member of the CC. When I downloaded the CC installer asks me to connect, but following that there is no icon 'Apps '? I can't find so one of the applications that I signed up for download. I spent three hours with a customer support representat

  I am a new Member of the CC. When I downloaded the CC installer asks me to connect, but following that there is no icon 'Apps '? I can't find so one of the applications that I signed up for download. I spent three hours with a representative of working by remote customer support, but still no advance. No display software in the laucher CC if anyone else had this? And how it was settled? -cheers - Philip

  Missing Creative Cloud Desktop applications tab

• Hello everyone I am new Member...

  Hello all I am a new Member and not at all an INFORMATION technology, but has good experience on the creation of commercial Web sites and exporting to WordPress with other software, can I expect to create better sites with Muse and is it possible to export to Wp, Joomla and drupal?

  Is all made websites were fluid balanced sensitive sites?

  What all available widgets? Is it possible to create a good custom panel for editing in WordPress?

  They are wrong. WordPress uses PHP technology and structure trying owner of Wordpress and the database that Muse is not supported.

• DRM error - adding new Member (3317)

  I received the error message following (#3317) when I tried to add a new Member - can someone please advise how to solve this problem?
  
  * \\Record #89 - error adding members ABC12345 (3317) *.
  
  * \\Record #89 - contours of global storage are no Member once shared in a stored hierarchy, including prototype.*
  
  * ABC123456789 ABC12345 SAMPLE NAME S + *.
  
  Thank you!

  The answer lies in the error message itself,

  Please check below thread,

  Essbase Studio?

  and also

  http://docs.Oracle.com/CD/E12032_01/doc/EPM.921/html_errmsgs/ASO.htm

  Murali-

• New Member charge tables sources to target Essbase using ODI.

  Hello Experts!
  
  There is a daily load of data from oracle to HP (Essbase cube) 11.1.2 table. Sometimes, they add a new Member in the table to load data that is not existing in Essbase cube.
  
  We want to add or map this new Member-to-Member Essbase called members unmapped itself to load data and load data? using ODI. ?
  
  Can you please suggest any options for this?
  
  
  Thanks in advance!
  Alex keny

  If you keep a list of essbase members in an array then compare that list with the table data loading and load the Member in essbase.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to map data for several members of a new Member in the new application?

  We are creating a new application with the new account codes, projects and management centres. In some cases
  several former members will map to or roll up to a new Member. Originally we used rules to convert the old APP data to the new app but how cases would be treated? Is it possible to get the data to add to what is currently in a cell rather than destroy the old values?

  There is an option in a rule in the charge to "add to the existing values" or "replace values. If you are mapping multiple members in one Member, just use the "add to the existing values.

  To define this - open state of charge and select 'Options', 'parameters to load data. Select "add to the existing values.

  Using rules of load so that it works fine, until you need to split a member in several Member - responsible rules of course this is impossible.

  -Jake

• Easy question: router WRT54G: how to rename the user and give a new password?

  Not very computer, but following the recommendations in the FAQ, I have reset my WRT54G router to the default settings by hitting the reset buttong and entering into the Web site. I got a new computer and I forgot the old password. After reset to defaults now the link is not secure. How can I go about renaming the user and giving it a new password of my own - it was a while that I have configured the router, and I don't have the CD. Any help that you can offer or the direction you can piont me is appreciated.

  Try to proceed as following:

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...
  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...

  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything... Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• new to vmware - question

  Hi all, I'm new to VMWare and you want to ask a silly question. My project plans to use vmware on a single physical server running windows 2003 to implement multiple instances of servers windows 2003 virtual. My question is what do we need to have different IP address and host name for each server virtual windows? Or vmware manages to solve this problem itself? If so, how does this work?

  Thank you!

  lqin1983 wrote:

  guys, thanks for your reply... as you said, we need differernt IP addresses for each server, which makes it easy for us becase that means that we must go through a long process to the commission, the servers with the new ip address...

  If you had multiple physical servers, you will need to go through the same exact process. How many servers you plan giving each server an IP address is a big problem? VMWare removes just your need more physical servers, what you do with the guest computers is pretty much unchanged.

• Help - creating a new Member with a calculation

  Hello everyone.
  
  I'm new to Essbase Administration & I am trying to learn the rules and syntax of setting in place Member within my plan calculations. I hope someone can help me with a few questions (please) ;)
  
  I am trying to add some values calculated on our list of accounts - for example: "net book value" - to track the value of our assets.
  
  Our environment is 6 dimensions
  The time dimension is just year-> month-> Trim
  We also have a dimension for the fiscal year and type - for example, 'Actual 2008' and 'forecasts of 2005', etc...
  
  My first Question:
  Is "smart" enough to know that Jan-> 'Actual 2009' logically essbase following Dec-> '2008 Actual?
  
  
  My thought for the calculation of the net book value was to use one of the following two solutions...
  but it will be based on Essbase knowing that January follows December of the previous financial year.
  I have to manually enter an Original "net book value".
  
  
  Option 1:
  "Accumulated depreciation" = @sumrange (depreciation, Jan-> "2000 real": Aug-> 2009 'real' ")
  or
  "Accumulated depreciation" = @sumrange (amortization, @xrange (Jan-> "actual 2000", Aug-> 2009 'real' "))
  
  who (theoretically, in my mind) returns a range from the depreciation of securities since the beginning of 2000 to the present and find the sum.
  Then
  
  "Net book value" = "Original Net Book Value" - "accumulated depreciation".
  
  
  Option 2:
  "Previous net book value" = @Priors (SKIPBOTH, "net book value")
  
  to get the value from the previous month.
  Then
  
  "Net book value" = 'Net book value previous' - depreciation
  
  where is he taking the previous value and subtracting depreciation from the current month
  
  
  Thank you for your help or advice!
  
  Kind regards
  Andrew

  For the month of January @prior function will give erroneous results.
  You can use the formula below.

  If (@ismbr (jan))
  If (@ismbr (2001))
  'Previous net book value' = 'Dec'-> '2000'-> 'net book value;
  ElseIf (@ismbr (2002))
  'Previous net book value' = 'Dec'-> '2001'-> 'net book value;
  ElseIf (@ismbr (2003))
  'Previous net book value' = 'Dec'-> '2002'-> 'net book value;
  ElseIf (@ismbr (2004))
  'Previous net book value' = 'Dec'-> '2003"->"net book value ";
  ElseIf (@ismbr (2005))
  'Previous net book value' = 'Dec'-> '2004'-> 'net book value;
  ElseIf (@ismbr (2006))
  'Previous net book value' = 'Dec'-> '2005'-> 'net book value;
  ElseIf (@ismbr (2007))
  'Previous net book value' = 'Dec'-> '2006'-> 'net book value;
  ElseIf (@ismbr (2008))
  'Previous net book value' = 'Dec'-> '2007"->"net book value ";
  ElseIf (@ismbr (2009))
  'Previous net book value' = 'Dec'-> '2008'-> 'net book value;
  endif
  ElseIf
  "Previous net book value" = @Priors (SKIPBOTH, "net book value");
  endif