new mode blind phone

Similar Questions

• Lightroom will not work on the computer after payment has failed and the new mode of payment put in.

  Adobe will not work.  Lightroom need to work.  Tried to uninstall Lightroom and creative cloud, they stopped working when my payment failed.  After putting in the new mode of payment that they still do not work.  Now don't reinstall it on mac 10.10.5 after several attempts and reboots.  Also, if anyone knows a phone number for adobe support.  I tried to find one, but it just shows that I have are not eligible for phone support... I pay for a product, I can call someone!

  allow a day of pst for your payment to process.  It is currently Saturday am pst.

  then check your account to see if it's what you expect.

  Otherwise, contact adobe support during the time pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  If it shows your subscription is current, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• BlackBerry Smartphones active new SIM - now phone SOS only

  Hi all. Have a little problem. I had to go back to an old 9700 When my current iPhone broke. I needed a new card SIM from the iPhone using a different card. When I called Rogers to activate the SIM everything was fine for about a minute. I received texts that were pending since Sunday when my iPhone broke. I had full bars etc. Once a minute, he went to SOS only. While I was on the phone with Rogers Tech Support I have reset and removed the battery and SIM and all the things they wanted me to. Everything looks good on their system, he said that the problem must be with the device.

  A bit on the device:

  Originally with Mobilicity in 2009. Opened and used with the wind. My father then used with Rogers and Fido. Since Sunday, when my phone broke, I used SIM card of my brother-in-law (he just swung at Rogers to the wind, but his plan has always been paid until the end of September) and the BB worked very well. If it worked correctly with a Rogers SIM.

  Now, I get the same problem with my brother-brother SIM. SOS only. No connection. What happened when active Rogers SIM card must have done something to the camera itself because now it does not connect to any of them. That both SIMs work as I have tested both in my wife's phone.

  The guy on the Support of Rogers suggested that perhaps the closed phone itself - but when I enter the settings advanced for the SIM card that everything is disabled in customization... so it appears not to be locked.

  He said that I should try to reinstall the OS, but that it will block the phone and I need to unlocked again.

  Is there anything else it could be? Will reinstall the OS relock the phone? Any other suggestions?

  Thank you very much!

  Hello

  jvnanu wrote:

  The guy on the Support of Rogers suggested that perhaps the closed phone itself - but when I enter the settings advanced for the SIM card that everything is disabled in customization... so it appears not to be locked.

  He said that I should try to reinstall the OS, but that it will block the phone and I need to unlocked again.

  Is there anything else it could be? Will reinstall the OS relock the phone? Any other suggestions?

  First this... avoid this tech Rogers like the plague. He has no idea what he's talking about. All what he told you is simply not possible. Once MEP unlocked, a BB device can blocked at the factory. Nothing of what you have done or the facilities of any OS can relock a BB.

  I'd rather a complete security on the Device Wipe:

  • KB14058 How to delete all data and applications in the smartphone BlackBerry using the security option wipe

  Otherwise, a ResetToFactory WIPE:

  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  After each one, put it in the SIM card and switch on the device, and then make sure that the voice is through Rogers. Only then start to worry about getting all the data to work (if you subscribe BIS, in other words).

  If you want to get off the OS Reload path, then the easiest way is, on a PC (you can not do this on MAC):

  (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below. (not applicable in your situation)

  2) uninstall all the BB OS packages from your PC,

  (3) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/software/desktop.html

  (4) download and install on your computer, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp
  • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

  5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

  6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...
  • Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC.

  If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• New modes of export - exporting not through target buttons-layer blend modes

  This can be corrected. I do not know?

  Basically when I feature layer 'button target' application of a blending mode to the layer it does not export the blending mode correctly. that is flat/normal.

  I can get around this by applying the 'normal' mode of return to the mixing layer and apply the blend mode to individual objects, but is not ideal for my workflow. I can also get around this by using the 'save for web' option to legacy but again, not ideal for the workflow.

  Any suggestions? Thank you!

  This is a front screen:

  

  and after export:

  

  Create a new layer and drag the layer with the blending in it mode. Try again. I could just that it works.

• New SIM card phone

  Will buy my 1st iPhone soon, which I know will be unlocked. I also want to switch from Verizon to AT & T at the same time. When I buy my phone on the Apple store and they set up for me, will they have the appropriate SIM (AT & T) right there and then that when I get out of the shop, I am able to use my phone immediately? Thank you.

  Yes, but it will not be unlocked unless you pay full price or use the funding available at Apple. If you buy using AT & T next, it will be locked to AT & T.

• Location of new mods of ram in the 4 slots?

  Hello

  I just increased my mods four ram current 4 x 2 GB 2 x 8 GB & 2 x 2 GB, increasing overall from 8 GB to 20 GB. part of the reason for this is due to a beachball regular spinning that seems to have stopped now I'm happy to say.

  Is there a preferable to their location order? I am told that the 8 GB should go side by side in the top slots while others tell me that it is not serious.

  Some clear advice would be welcome.

  My iMac ram works great as shown in the photo below.

  Some advice about my activity for memory monitor reading would also be welcome. His memory displays used to 7.28 GB and caching of files of 3.29 GB. Can I send through a few photos of this too if it would help?

  Thank you very much

  Steve

  

  You have the RAM installed incorrectly, each pair must be by-side not above the other.

• New blackBerry Z30 phone stuck on the first screen of update...

  Hi I plugged the new z30, and it hung on the audit for screen updates.  I can't access anything that anyone else.

  How to do a hard reset. ???

  NVM, I neede to stronger Pamela on the screen to slide down

• New mode of computer

  New incoming computer.  I havef a license for CS4.  Make install on Windows7 computer based first, then apply the upgrade to CS6 or can I start from Strath with CS6?

  You can directly start from scratch... Put the serial number of the CS6, then CS4 serial number when asked.

• Need new battery for phone i 6

  Can I buy a battery from Apple.

  IPhone battery & Power - official Apple Support

  Yes, Apple will replace the battery of the iPhone.

  I recommend contacting Apple for support and service - Apple support to be implemented. Don't forget to back up your iPhone before it will send in or booking your appointment from the Apple store for the Genius bar. They can also check that the replacement of the battery may even solve your problem before the replacement. It's not free, so if you are outside of your warranty, it will be good to know you just are not wasting money on something that could have been resolved through software.

• New synchronization problem phone to computer

  Updated my iphone, but my computer is not recognizing my current Itunes 'correctly downloaded.

  You use iTunes 12.4 (current version)?

• 12 months McAfee Internet Security with the new free cell phone purchases

  Hello

  I recently purchases HP laptop 15-R036. In HP online (https://www.hpshopping.in/hponlinestore/Products/Online_PR_ProductListing.aspx?fil=HP_15&typ=Laptops...), it is said that it comes with 1 year of free subscription to McAfee. But installed McAfee indicates that the subscription is valid only for 1 month. Please check HP offer in the above site and I would like to know how I can get 1 membership as specified in the offer. Thank you.

  Hi PradipKumarDas,

  Welcome to the Forums of HP Support!

  I understand that you are looking for information on the McAfee subscription which was supposed to come with your HP 15 - R036 PC of 1 year.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click on the link to get help from your region number. Contact HP worldwide

  I hope this helps.

  Take care and have a great day!

• sleep not applying new mode do not log archiving

  I just created waiting for database... but not his newspaper archive application...
  
  When I checked the alerlog standby file...
  ORA-19527 physical standby redo log needs to be renamed

  If you use pfile to standby then do the following setting in the pfile file entry

  log_file_name_convert = 'test', 'test '.

  and follow the steps above.

  concerning

• Hi, I bought a brand new 6 s iPhone known most 16 GB from a local retailer. He convinced me to buy the demo not selling iPhone that was attached packed and said his new never used but only after opening updated iOS... Is this phone is normal?

  Hi, I recently bought a new model of more than 16 gb iPhone 6s from a known retailer. The phone wasn't demo for sale but he convinced me saying his seal all packed and quite simply not been used and do not have the phone to the ear, but that he provided separately. But now, after opening the seal that he had to upgrade the iOS and I was skeptical since, but he said its normal to update for all the phone manufacturer before the new iOS. the phone feels very well and works normally, but I feel fuzzy and would like to know if the phone is like nine normal phone or not because I paid him the money together without discount. Also the logo behind apple not incorporated that fine and feels separately. Help, please

  Is this retailer authorized Apple dealer?

• Host multi-domain phone Cisco C2960-mode does not go to the field of voice

  Hello world

  I'm working on the deployment of dot1.x through our company. I'm stuck on configuring Cisco phones to go on one VLAN correct when the multi domain host-mode option is used. I tried on two C2960 switch with two different images. No matter what I do, the phone is going to area: DATA and unable to connect to the network as more likely, it is a wrong VLAN. Poster as authenticated port ISE and MAB works very well. When I set up stream host-mode, the phone Gets a VLAN correct and can top to the network.

  Here is what I use:

  • C2960S-48-i/s-L with C2960S-UNIVERSALK9-M or if C2960 with c2960-lanlitek9 - tar.150 - 2.SE7
  • Phone Cisco 7960 and 7962
  • ISE 1.3.0.876

  Here is the current port configuration:

  GigabitEthernet1/0/1 interface

  switchport access vlan 2

  switchport mode access

  switchport voice vlan 703

  multi-domain of host-mode authentication

  authentication order mab dot1x

  authentication priority dot1x mab

  Auto control of the port of authentication

  periodic authentication

  MAB

  dot1x EAP authenticator

  dot1x tx-time 10

  spanning tree portfast

  end

  Here is the output of logon authentication show inter Gig1/0/1

  MAC address: 0013.1a58.xxxx

  IP address: unknown

  Username: 00-13-1A-xx-xx-xx

  Status: Authz success

  Area: DATA

  Oper host mode: multi-domain

  Oper control dir: in

  Authorized by: authentication server

  Policy of VLAN: n/a

  The session timeout: 5400 s (local), remaining: 5384 s

  Delay action: authenticate again

  Idle timeout: N/A

  The common Session ID: 0AF301450000000C001F3391

  ACCT Session ID: 0x00000010

  Handle: 0x0400000D

  Thanks for your help.

  Looks like youre missing the device class = attribute in your profile authz voice.

• Need serious help. New 8831 phones problems.

  Thank you in advance for helping with this.

  I pulled out recently of new 8831 conference phones to replace my old phones 7937 spider, unfortunately phones know terrible incoming audio. Phones are on a branch site, connected via MPLS and registered at 8.6 CUCM to Headquarters. We have a total of 900 7940 phones that have no problems in any of the different location and band bandwidth/congestion is not a problem. The audio input signal poor that happens to every call. Audio output is fine. 8831 phones are having the same issues at several sites of the branch, but seems more predominant in some. The question has been described as 'audio static, choppy, distorted, with a few breaks.

  I tested with G.729 and G.711 without some luck, after using the web interface to enter stats here, this is what they look like:

  Remote address
  Local address
  10:33:26 departure time has
  Flow in Active status
  Host name
  Sender packages 7180
  Sender 143600 bytes
  The sender Codec G.729
  Reports of the sender sent 0
  Sender report time sent to 00:00:00
  RCVR 2215 of lost packets
  Jitter AVG 20
  RCVR Codec G.729 
  RCVR sent reports 0
  RCVR report time sent to 00:00:00
  RCVR packages 7178
  RCVR 143560 bytes
  MOS LQK 2.8657
  AVG MOS LQK 2.3054
  Min MOS LQK 2.0000
  Max MOS LQK 3.0295
  MOS LQK Version 0.95
  Cumulative conceal 0.1356 Ratio
  Interval to conceal Ratio 0,0560
  Max conceal 0.2766 Ratio
  Hide the dry 140
  Severely hide dry 120
  Latency 40
  Jitter of Max 160
  Sender, size 20 ms
  The sender of the received reports 0
  Report to sender time received at 00:00:00
  RCVR size 20 ms
  1266 thrown RCVR
  RCVR reports received 0
  RCVR report time to 00:00:00

  As you can see that the MOS is pretty bad, jitter and ignored packets seem to be bad too. Intrasite tests have resulted in better looking for numbers. Initially, I immediately thought "QoS" but all other phones are fine and the problem is with audio INCOMING do not outgoing.

  All comments on this are appreciated.

  Thank you.

  Hello

  As you can see receiver lost packets number is very high, which will cause audio choppy. Looks like you face below default

  https://Tools.Cisco.com/bugsearch/bug/CSCuq03746

  Also can ensure you codec used is g729r8 not g729br8. g729br8 has integrated VAD have so it will drop some packets. Also disable VAD in any voip dial peer by using the command "no vad.

  Kind regards

  Mohit Singh