New-need help separating the layers in psd files
Good evening everyone,
Could someone guide me please on how to separate the layers in a psd file? I try to remove the text (layer) of the background and have never done this before. Thank you in advance,
GB
Is there more than one layer shown on your layers panel?
If there is a text layer, you can disable the lift for this layer or delete the layer.
MTSTUNER
Tags: Photoshop
Similar Questions
-
Need help in the interpretation of a file of Trace 10053
Hello
I need help to interpret an event 10053 (optimizer Trace) trace file
Everything that happens on AIX with Oracle 11.2.0.2
It is not obvious to me why the optimizer chooses the path with the highest cost.
But I found the following quote in the trace file, which is probably the answer, but I did not understand what circumstances allow the optimizer to say such things:
New AP rejected: guess used for New, but not for the current best
So, it was the short story, now the witch for a long time one quote of the trace file
Here the query directly in the trace file. I can't modify this query, even a hint is not feasible, so I need to understand the incorrect path to avoid it.
And here's the strange part.************************** Automatic degree of parallelism (ADOP) ************************** Automatic degree of parallelism is disabled: Parameter. PM: Considering predicate move-around in query block SEL$1 (#0) ************************** Predicate Move-Around (PM) ************************** OPTIMIZER INFORMATION ****************************************** ----- Current SQL Statement for this session (sql_id=0zdbb3hzztdaf) ----- explain plan for SELECT aktl_aend, aktl_akgrnr, aktl_akgrpos, aktl_akh, aktl_alterart, aktl_anz_in, aktl_anz_nach, aktl_artrab, aktl_beg, aktl_belart1, aktl_belart2, aktl_belnr1, aktl_belnr2, aktl_bestkz, aktl_bestmg1, aktl_bestmg1_alt, aktl_bestmg2, aktl_bestmg2_alt, aktl_eindat, aktl_ek, aktl_ekdat1, aktl_ekdat2, aktl_ekkopie, aktl_ekn, aktl_eknorm, aktl_ek_alt, aktl_end, aktl_fbdarst, aktl_fbd_alt, aktl_fbseite, aktl_fbs_alt, aktl_fbtxt, aktl_info_werbeabt, aktl_info_wgm, aktl_kaek, aktl_kaekn, aktl_kaek_alt, aktl_kombiart, aktl_ldat1, aktl_ldat2, aktl_lf, aktl_lf_alt, aktl_mgfk, aktl_mg_p, aktl_mg_r, aktl_mindmg, aktl_neudat, aktl_nnek, aktl_nnekn, aktl_pabw, aktl_pic, aktl_plan_menge, aktl_plan_menge_hela, aktl_plan_stueck, aktl_plan_stueck_hela, aktl_plan_woche, aktl_plan_woche_hela, aktl_rdat, aktl_ro_p, aktl_ro_r, aktl_seite, aktl_sigkz, aktl_sokoeur, aktl_sokoeur_alt, aktl_sokopr, aktl_sokopr_alt, aktl_sort_vorab, aktl_stat, aktl_text, aktl_txtbau, aktl_txtbaukz, aktl_um_p, aktl_um_r, aktl_user, aktl_vk, aktl_vkn, aktl_vk_alt, aktl_zen, akt_at_at_no, akt_at_at_se_se_ag_ag_no, akt_at_at_se_se_ag_ag_wg, akt_at_at_se_se_no, ROWID, rownum, uid, USER, vid FROM akt WHERE ( aktl_stat <> :"SYS_B_0" ) AND ( aktl_zen = :"SYS_B_1" ) AND ( aktl_akh BETWEEN :"SYS_B_2" AND :"SYS_B_3" AND ( ( akt_at_at_se_se_ag_ag_wg = :"SYS_B_4" AND akt_at_at_se_se_ag_ag_no = :"SYS_B_5" ) ) ) ORDER BY akt_at_at_se_se_ag_ag_wg ASC, akt_at_at_se_se_ag_ag_no ASC, aktl_akh ASC, aktl_akgrnr ASC, aktl_akgrpos ASC, aktl_kombiart ASC, akt_at_at_se_se_no ASC, akt_at_at_no ASC *******************************************
As far as I know, in this quotation that the optimizer realizes, that there is a better path than the AKT_INDEX, but he ignores it.
So my question, of course, why not make the path through FK_AKH_AKTL_AKH?*************************************** BASE STATISTICAL INFORMATION *********************** Table Stats:: Table: AKT Alias: AKT #Rows: 14006583 #Blks: 477882 AvgRowLen: 281.00 ChainCnt: 570341.00 Index Stats:: Index: AKTL_UMNUM Col#: 44 LVLS: 2 #LB: 60137 #DK: 64171 LB/K: 1.00 DB/K: 179.00 CLUF: 11535830.00 Index: AKT_INDEX Col#: 2 3 4 5 1 6 LVLS: 3 #LB: 83897 #DK: 13955093 LB/K: 1.00 DB/K: 1.00 CLUF: 11889950.00 Index: AKT_INDEX010 Col#: 54 56 LVLS: 2 #LB: 37453 #DK: 392568 LB/K: 1.00 DB/K: 5.00 CLUF: 1127943.00 Index: AKT_INDEX011 Col#: 55 57 LVLS: 2 #LB: 33967 #DK: 2102 LB/K: 65.00 DB/K: 869.00 CLUF: 449507.00 Index: AKT_INDEX012 Col#: 2 3 4 5 6 LVLS: 2 #LB: 66503 #DK: 2506277 LB/K: 1.00 DB/K: 5.00 CLUF: 13420693.00 Index: FK_AKH_AKTL_AKH Col#: 1 6 LVLS: 2 #LB: 35870 #DK: 184651 LB/K: 1.00 DB/K: 6.00 CLUF: 1131183.00 Index: KEY_AKT Col#: 1 2 3 4 5 6 LVLS: 2 #LB: 82467 #DK: 13793510 LB/K: 1.00 DB/K: 1.00 CLUF: 11691370.00 Access path analysis for AKT *************************************** SINGLE TABLE ACCESS PATH Single Table Cardinality Estimation for AKT[AKT] Column (#6): NewDensity:0.000000, OldDensity:0.000000 BktCnt:4202816, PopBktCnt:4202810, PopValCnt:133, NDV:139 Column (#6): AKTL_ZEN( AvgLen: 4 NDV: 139 Nulls: 0 Density: 0.000000 Min: 1 Max: 61044 Histogram: Freq #Bkts: 139 UncompBkts: 4202816 EndPtVals: 139 Column (#2): NewDensity:0.129575, OldDensity:0.000000 BktCnt:4201875, PopBktCnt:4201875, PopValCnt:2, NDV:2 Column (#2): AKT_AT_AT_SE_SE_AG_AG_WG( AvgLen: 3 NDV: 2 Nulls: 0 Density: 0.129575 Min: 6 Max: 7 Histogram: Freq #Bkts: 2 UncompBkts: 4201875 EndPtVals: 2 Column (#3): NewDensity:0.000000, OldDensity:0.000000 BktCnt:4197711, PopBktCnt:4197711, PopValCnt:52, NDV:52 Column (#3): AKT_AT_AT_SE_SE_AG_AG_NO( AvgLen: 3 NDV: 52 Nulls: 0 Density: 0.000000 Min: 6 Max: 99 Histogram: Freq #Bkts: 52 UncompBkts: 4197711 EndPtVals: 52 Column (#85): SYS_STUF1FT2E0X6B6C$__BGEZQRHS( AvgLen: 12 NDV: 5571 Nulls: 0 Density: 0.000180 Min: 2117233 Max: 9997926970 Column (#84): NewDensity:0.000000, OldDensity:0.000000 BktCnt:4201269, PopBktCnt:4201265, PopValCnt:71, NDV:75 Column (#84): SYS_STULHCKPI#FOQE1JMOOXNGSFB0( AvgLen: 12 NDV: 75 Nulls: 0 Density: 0.000000 Min: 157628517 Max: 9982459671 Histogram: Freq #Bkts: 75 UncompBkts: 4201269 EndPtVals: 75 Column (#4): NewDensity:0.000001, OldDensity:0.000000 BktCnt:4201338, PopBktCnt:4201338, PopValCnt:69, NDV:69 Column (#4): AKT_AT_AT_SE_SE_NO( AvgLen: 3 NDV: 69 Nulls: 0 Density: 0.000001 Min: 1 Max: 98 Histogram: Freq #Bkts: 69 UncompBkts: 4201338 EndPtVals: 69 Column (#5): AKT_AT_AT_NO( AvgLen: 4 NDV: 7466 Nulls: 0 Density: 0.000134 Min: 1 Max: 9964 Column (#1): AKTL_AKH( AvgLen: 5 NDV: 16307 Nulls: 0 Density: 0.000061 Min: 14 Max: 543136 Column (#55): NewDensity:0.000001, OldDensity:0.000000 BktCnt:4203610, PopBktCnt:4203610, PopValCnt:5, NDV:5 Column (#55): AKTL_BELART2( AvgLen: 3 NDV: 5 Nulls: 0 Density: 0.000001 Histogram: Freq #Bkts: 5 UncompBkts: 4203610 EndPtVals: 5 Column (#57): NewDensity:0.000002, OldDensity:0.000001 BktCnt:254, PopBktCnt:253, PopValCnt:1, NDV:2102 Column (#57): AKTL_BELNR2( AvgLen: 3 NDV: 2102 Nulls: 0 Density: 0.000002 Min: 0 Max: 9902670 Histogram: HtBal #Bkts: 254 UncompBkts: 254 EndPtVals: 2 Column (#54): NewDensity:0.000088, OldDensity:0.000000 BktCnt:4204429, PopBktCnt:4204429, PopValCnt:6, NDV:6 Column (#54): AKTL_BELART1( AvgLen: 3 NDV: 6 Nulls: 0 Density: 0.000088 Histogram: Freq #Bkts: 6 UncompBkts: 4204429 EndPtVals: 6 Column (#56): NewDensity:0.000000, OldDensity:0.000001 BktCnt:254, PopBktCnt:223, PopValCnt:1, NDV:392568 Column (#56): AKTL_BELNR1( AvgLen: 3 NDV: 392568 Nulls: 0 Density: 0.000000 Min: 0 Max: 9904026 Histogram: HtBal #Bkts: 254 UncompBkts: 254 EndPtVals: 32 ColGroup (#5, Index) AKT_INDEX Col#: 1 2 3 4 5 6 CorStregth: 8702149.74 ColGroup (#3, Index) AKT_INDEX012 Col#: 2 3 4 5 6 CorStregth: 2971.37 ColGroup (#1, VC) SYS_STUF1FT2E0X6B6C$__BGEZQRHS Col#: 2 3 6 CorStregth: 2.59 ColGroup (#4, Index) FK_AKH_AKTL_AKH Col#: 1 6 CorStregth: 12.28 ColGroup (#7, Index) AKT_INDEX010 Col#: 54 56 CorStregth: 6.00 ColGroup (#6, Index) AKT_INDEX011 Col#: 55 57 CorStregth: 5.00 ColGroup (#2, VC) SYS_STULHCKPI#FOQE1JMOOXNGSFB0 Col#: 2 3 CorStregth: 1.39 ColGroup Usage:: PredCnt: 3 Matches Full: #2 Partial: Sel: 0.0133 Column (#34): NewDensity:0.000000, OldDensity:0.000000 BktCnt:4199313, PopBktCnt:4199311, PopValCnt:9, NDV:11 Column (#34): AKTL_STAT( AvgLen: 2 NDV: 11 Nulls: 0 Density: 0.000000 Histogram: Freq #Bkts: 11 UncompBkts: 4199313 EndPtVals: 11 Table: AKT Alias: AKT Card: Original: 14006583.000000 Rounded: 3 Computed: 3.05 Non Adjusted: 3.05 Access Path: TableScan Cost: 131075.91 Resp: 131075.91 Degree: 0 Cost_io: 129428.00 Cost_cpu: 16864951683 Resp_io: 129428.00 Resp_cpu: 16864951683 kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1) kkofmx: index filter:"AKT"."AKTL_AKH">=TO_NUMBER(:B1) kkofmx: index filter:"AKT"."AKTL_AKH"<=TO_NUMBER(:B1) kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1) kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1) kkofmx: index filter:"AKT"."AKTL_ZEN"=TO_NUMBER(:B1) kkofmx: index filter:"AKT"."AKT_AT_AT_SE_SE_AG_AG_WG"=TO_NUMBER(:B1) kkofmx: index filter:"AKT"."AKT_AT_AT_SE_SE_AG_AG_NO"=TO_NUMBER(:B1) ColGroup Usage:: PredCnt: 2 Matches Full: #2 Partial: Sel: 0.0133 ColGroup Usage:: PredCnt: 3 Matches Full: #2 Partial: Sel: 0.0133 ColGroup Usage:: PredCnt: 3 Matches Full: #2 Partial: Sel: 0.0133 Access Path: index (RangeScan) Index: AKT_INDEX resc_io: 1128.00 resc_cpu: 45259416 ix_sel: 0.013333 ix_sel_with_filters: 0.000000 ***** Logdef predicate Adjustment ****** Final IO cst 0.00 , CPU cst 150.00 ***** End Logdef Adjustment ****** ***** Logdef predicate Adjustment ****** Final IO cst 0.00 , CPU cst 151.08 ***** End Logdef Adjustment ****** ***** Logdef predicate Adjustment ****** Final IO cst 0.00 , CPU cst 151.13 ***** End Logdef Adjustment ****** Cost: 567.59 Resp: 567.59 Degree: 1 ColGroup Usage:: PredCnt: 2 Matches Full: #2 Partial: Sel: 0.0133 ColGroup Usage:: PredCnt: 3 Matches Full: #2 Partial: Sel: 0.0133 ColGroup Usage:: PredCnt: 3 Matches Full: #2 Partial: Sel: 0.0133 Access Path: index (skip-scan) SS sel: 0.000096 ANDV (#skips): 7466.000000 SS io: 7466.000000 vs. index scan io: 887.000000 Skip Scan rejected Access Path: index (RangeScan) Index: AKT_INDEX012 resc_io: 2177.00 resc_cpu: 54677577 ix_sel: 0.013333 ix_sel_with_filters: 0.000096 ***** Logdef predicate Adjustment ****** Final IO cst 0.00 , CPU cst 150.00 ***** End Logdef Adjustment ****** Cost: 1092.54 Resp: 1092.54 Degree: 1 Access Path: index (RangeScan) Index: FK_AKH_AKTL_AKH resc_io: 201.00 resc_cpu: 15070140 ix_sel: 0.004500 ix_sel_with_filters: 0.000032 Cost: 101.24 Resp: 101.24 Degree: 1 New AP rejected: guess used for New but not for Current Best ColGroup Usage:: PredCnt: 3 Matches Full: #2 Partial: Sel: 0.0133 ColGroup Usage:: PredCnt: 3 Matches Full: #2 Partial: Sel: 0.0133 Access Path: index (RangeScan) Index: KEY_AKT resc_io: 380.00 resc_cpu: 15131385 ix_sel: 0.004500 ix_sel_with_filters: 0.000000 ***** Logdef predicate Adjustment ****** Final IO cst 0.00 , CPU cst 150.00 ***** End Logdef Adjustment ****** Cost: 191.20 Resp: 191.20 Degree: 1 New AP rejected: guess used for New but not for Current Best ****** trying bitmap/domain indexes ****** Access Path: index (IndexOnly) Index: FK_AKH_AKTL_AKH resc_io: 164.00 resc_cpu: 13914716 ix_sel: 0.004500 ix_sel_with_filters: 0.000032 Cost: 82.68 Resp: 82.68 Degree: 0 SORT ressource Sort statistics Sort width: 612 Area size: 1048576 Max Area size: 107366400 Degree: 1 Blocks to Sort: 1 Row size: 21 Total Rows: 252 Initial runs: 1 Merge passes: 0 IO Cost / pass: 0 Total IO sort cost: 0 Total CPU sort cost: 10324700 Total Temp space used: 0 ColGroup Usage:: PredCnt: 2 Matches Full: #2 Partial: Sel: 0.0133 ColGroup Usage:: PredCnt: 2 Matches Full: #2 Partial: Sel: 0.0133 ColGroup Usage:: PredCnt: 2 Matches Full: #2 Partial: Sel: 0.0133 Access Path: index (IndexOnly) Index: AKT_INDEX resc_io: 1122.00 resc_cpu: 45203856 ix_sel: 0.013333 ix_sel_with_filters: 0.013333 Cost: 563.21 Resp: 563.21 Degree: 0 SORT ressource Sort statistics Sort width: 612 Area size: 1048576 Max Area size: 107366400 Degree: 1 Blocks to Sort: 481 Row size: 21 Total Rows: 186754 Initial runs: 2 Merge passes: 1 IO Cost / pass: 262 Total IO sort cost: 743 Total CPU sort cost: 169417045 Total Temp space used: 3015000 Bitmap nodes: Used FK_AKH_AKTL_AKH Cost = 83.692016, sel = 0.000018 Not used AKT_INDEX Cost = 1940.139796, sel = 0.013333 ****** finished trying bitmap/domain indexes ****** Best:: AccessPath: IndexRange Index: AKT_INDEX Cost: 567.59 Degree: 1 Resp: 567.59 Card: 3.05 Bytes: 0 ***************************************
THX in advance
Joerg
Published by: Joerg on September 23, 2011 17:05The bind variable you made are non-peekable, because the example you did evidence "explain plan" - which means that the optimizer uses is standard figures assumed that for "between: bind1 and: bind2 ', on the other hand, as predicates" column =: channels3 "can legally be estimated according to the density of the column.
This means that you probably searching for the case described in a blog post that I wrote some time ago:
http://jonathanlewis.WordPress.com/2010/09/07/CBO-surprise-3/Concerning
Jonathan Lewis -
Satellite C660 - BIOS Update Failed, need help restore the BIOS. BAK file
Everything by updating the system BIOS froze in step 7 to replace the code of the BIOS, needless to say that the laptop does not start because the BIOS is now corrupted.
I have the BIOS. BAK but need advice on how to restore the BIOS. I copied the BIOS. BAK on a key usb and it connected to the laptop computer and then powered on the system (now I tried the F, F2 key together). I can see the usb key will Flash initially but is not, clearly, progressing with the restoration.
I hope someone might be able to advise the use of the BIOS. BAK file to restore the BIOS.
Unfortunately I cannot help you with this but check it please this interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395
-
items 11, windows vista. selected photos to project, again, selected layer is empty with checkerboard waiting in the layer panel, can't to it completed, each time I try to fill it by clicking on the photo, he shows just lift in plan layer, and not in the new layer
Hello
In the editor, you can drag a photo from the photo on the current image tray and to add a new layer.
However, I don't know if that's what you really need. Can you please explain what you are trying to achieve and then we might be able to give the best advice.
Brian
-
Need help! All im opening PSD files are irregular.
↑ would be really grateful for the help as I have clients waiting, thank you very much!
Provide relevant information to get faster answers
More information you provide about your situation, the better equipped with other community members will answer. Consider including the following in your question:
- Product number and the version of Adobe
- Operating system and version number
- The full text of all error messages
- What you were doing when the problem occurred
- Screenshots of the problem
- Computer hardware, such as CPU; GPU; amount of RAM; etc.
-
I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.
To migrate your iPhoto library to Photos for Mac, drag it in the Photos icon in the Dock. Photos will read the iPhoto library and create a new library of pictures of him.
Is your photo library in iPhoto on an external drive? The migration will work that if the external hard drive Mac OS extended (journaled) file system. If the library is on a disk with a different file system, Ministry of the environment of the library of a correctly formatted disk.
-
Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.
Hello
The link below is a guige to install a video card in your Pc. In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below. If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.
http://support.HP.com/us-en/document/c01700855
Kind regards
DP - K
-
I need help with the program of Photos on my macbook pro
I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?
Hi, I'm fighting to open same mine, making a new software update
-
Need help with the launching track pack for forza code 4
Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
This is the help I get when the cat to an Ambassador xbox on xbox.com
Terry wrote:Need help with the launching track pack for forza code 4The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]The Xbox Ambassador says:HelloTerry wrote:HelloThe Xbox Ambassador says:HeyTerry wrote:just to be on the phone to xbox live support and was told to come hereThe Xbox Ambassador says:ok\The Xbox Ambassador says:What is your problem?Terry wrote:I bought the 4 for forza ansd 360 new sealed Christmas...Terry wrote:has got 2 codes that accompanies the game but the pack track code does not workThe Xbox Ambassador says:Wow goodTerry wrote:whenever I put in the code it says code redeemedThe Xbox Ambassador says:I think the code is used. You must return to the retailerTerry wrote:I tried to, but since I already opened the case they will not acceptThe Xbox Ambassador says:Oh. No,Terry wrote:the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is openThe Xbox Ambassador says:Maybe it was auto bought?Terry wrote:so, how do I get another code generated track Pack if defective?The Xbox Ambassador says:I do not know.Terry wrote:bought the game new, so I get the track packThe Xbox Ambassador says:Oh. It's bad.The Xbox Ambassador says:I think that if you Exchange 1 code it will buy itTerry wrote:car pack code worked, starter pack did not workThe Xbox Ambassador says:Oh.The Xbox Ambassador says:It's a badThe Xbox Ambassador says:BTW you have an evolution of the tests?Terry wrote:Yes, I want to? but more anxious to get a code object generated for this packThe Xbox Ambassador says:Hey if I help can u give me this game too?Terry wrote:?????????????????Terry wrote:So is it possible to get a code for that time?The Xbox Ambassador says:HeyThe Xbox Ambassador says:Yes.The Xbox Ambassador says:you need to contact themThe Xbox Ambassador says:and tell them that the code is used.Terry wrote:I was told to come here? where can I go to get the code?Hi Terryg76,
· What version of the operating system is installed on the computer?
I suggest you to contact the game manufacturer for more help and information.
-
I need help for the upgrade of my current system.
I need help for the upgrade of my current system.
I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.
I want to make the larger environment using the following:
(1) apply Virtualization
(2) apply to the failover process (clustering)
"(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.
Storage 4) that supports Raid (1 and 5)
UTM excellent 6) that supports (SSL VPN, VPN Global)
suitable backup solution 7)
(8) good antivirus for clients
my questions:
(1) can you provide me with a good design for this environment
(2) should I choose what operating system:
Microsoft datacenter or company
I know datacenter provide us the unlimited VM but needs per processor license
so if I have two Grouped servers I want to buy 4 licenses
and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?
(3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?
(4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?
(5) what about win2k8 license for VM:
lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?
(6) can I use backExec license for SBS with windows 2008 standard
(7) who better to virtualization AMD or INTEL
(8) hyper V or VMware?
(9) what of Microsoft data protection Manager... is this good?
(10) what virtual machine manager? What are the benefites keys
Thanks in advance
Hello AnasAI,
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
need help with the backup of the copy of the OS
Hi team,
I bought the new Presario CQ40 and I need help regarding the opertaing and activation office 2007 system backup, please respond as soon as POSSIBLE.
Thank you and best regards,
Nancy (Julien).
Are you needing information to create the recovery disk set? HERE
As for activation Office 2007-if you paid for a license extend the 60-day trial version, simply enter your key when asked to activate. If you have not purchased a full license, you should be the link for the purchase of Ms. You can also buy Office 2007 locally(probably cheaper) and just use him license key to activate your preinstalled version.
-
I need help on the matrix of action script 3.0
I need help on the matrix of action script 3.0
[Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]
to apply a matrix for mc mat oppose:
var mat: Matrix = new Matrix;
mat.a = Whatever;
mat.b =
mat.c =
mat.d =
mast. TX =
mat.Ty =
MC. Transform.Matrix = Matt;
-
Hello need help with the opacity mask.
Hello need help with the opacity mask. I hope someone out there can help
I inherited a logo that appears to use a Logo of OM has a shape with a grad. This grad at first sight is not used in the Grad scheme and there is not editable. Looking at the transparency palette I find an OM (pic1) output option. If I choose what the grad on separates it from the page of the form, that is from there I can change/remove as required (Note2).
However, sometimes (he did no change), I'll be back to the same original form and output option is grayed out and is no longer available. Or I go to the similar shape that has the same treatment and I can't go out OM (pic3)
The only difference is the thumbnail in the transparency palette, which is strong in pic1 and rated on pic3. What Miss me? I'm not clear what the advantage is simply OM using the Grad palette to apply a grad in my form, but until I can get rid of OM who is there, I can't comfortably apply to the grad I want.
The white gradient LHS I have no problem with. I choose fortunately only and each time get the possibility of release of OM.
The other thing weird. When I select the white gradient. Sometimes, the exit option is in the palette without going through the drop-down list (Fig 4).
Other times seems not that OM has already been applied, because the palette gives me the ability to mask rather than liberation (5 photos). Until I go to the drop down and then I find Release is an option after all.
What is the difference here? Not much of a problem, because either way I can release OM to be able to change the grad.
The file is passed through several hands and play anywhere to try to resolve issues, and many stops and save slot, so something along the line was of course done a logo and not the other because of the difference, but I can't for the life of me see what that.
I hope someone can help. Very appreciated
See you soon
Dave
Dave,
I've (mis) understanding the issues, you can account for the box to the right in the main palette transparency (called thumbnail) here.
Illustrator help | Transparency and blending modes
represents the masking objects.
Some of your screenshots show no object mask, so it only is not really a mask even if do the opacity mask has been clicked and there seems to be one in the layers palette, wherever you look.
I think that it is perhaps the issue.
-
Need help with the verification of the student
My daughter bought Adobe Acrobat Pro XI on new Amazon and then we followed the directions on Adobe to verify she is a student at the high school. It's been 3 days and we still have not received the activation code to use our product? Adobe support is horrible (I was on the phone for hours without that person never responding) and there is nowhere to present a plane ticket.
Unfortunately it is in the forums that can do a lot for help you, since most of us are users of products like your daughter, and no employee here don't have much ability to deal with what anyone on your behalf beyond possibly check status.
Phone support | Orders, returns, exchanges
http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html
Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...
Get help from cat with orders, refunds and exchanges (non - CC)
http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )Another good resource for information is the student and teacher edition information forum:
-
I need help on the colors in first pro.
I need help on the color in general information.
http://www.YouTube.com/watch?v=vLEGtzyZ0Fs
I made this video in AfterEffects and exported in color 16-bit png sequence.
I then imported in first pro and added audio and some titles at the end.
Now, I want to do is have a perfect version that I could watch on my pc.
I used Mp4 h 264 to compress the video and it is on youtube.
I think that this compressor support only 8-bit color because there are bands in the sky.
Now, I have to make a version which is of very high quality that I can watch on my pc... I tried several codecs and it does not work.
The problem is so long that there something on top of the png sequence in premirere pro as an image or something, it's like
the displacement of the image in 8-bit color mode.
It's using Avi Lagarith lossless codec
Before there is a picture on top...
Just after that, the image appears... As you can the there are a few bands on this image.
I know it's subtle, but I want to know why this is happening.
Is there something I'm missing... I took much too long to try to fix this.
I ended up using the Quicktime animation codec for my video. The problem does not occur with this one, and I can't see any decline in the quality of the image.
Now, I have a file compressed at low cost for online viewing and a huge file that I can watch on my computer.
On a side note, can you guess how many hours it took for my computer make the png of this video sequence... 12 HOURS!
Should I get a new computer...
Thanks for the reply!
Maybe you are looking for
-
I think I've cracked it by disabling the two-step in my account of Microsoft verification, but I want to continue to use, so is it possible with Thunderbird?
-
It is compatible with the Explorer, but I'd really prefer to work with Firefox, but I also really like this HP program. Thank you
-
Boot Error c000021a status c0000005
Windows XP will not run. I'm c000021a error startup. Initially, the State was c0000032 (0,0), but after using mini Hiren's XP and delete a virus ms32dll.dll.vbs, the status changes to c0000005 (0,0), and I was no longer able to boot using mini XP.
-
I post a picture of Inssider 3, but I can't find the info to do it. I have a schooner SSID exactly as my named SSID. It has the same signal strength, data download. The only difference is the Mac address. The SSID legit begins with C8 and ends wi
-
Multiple digital cameras photo sequence
What is the recommended way to create a single, the command sequence is a series of photos taken with several digital cameras? In the program photo, that it is easy to create a single sequence of display etc. but as soon as it is exported to an exter