Satellite C660 - BIOS Update Failed, need help restore the BIOS. BAK file

Everything by updating the system BIOS froze in step 7 to replace the code of the BIOS, needless to say that the laptop does not start because the BIOS is now corrupted.

I have the BIOS. BAK but need advice on how to restore the BIOS. I copied the BIOS. BAK on a key usb and it connected to the laptop computer and then powered on the system (now I tried the F, F2 key together). I can see the usb key will Flash initially but is not, clearly, progressing with the restoration.

I hope someone might be able to advise the use of the BIOS. BAK file to restore the BIOS.

Unfortunately I cannot help you with this but check it please this interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

Tags: Toshiba

Similar Questions

  • Satellite Pro A300-15V, I need help in the Organization of my startup list

    Hello everyone!

    I need help in the Organization of my startup list:

    (Why should Toshiba button support I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
    ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
    Agent of filtering of Audio Conexant high definition (what is this program? Do I really need to start?)
    TOSHIBA Power Saver
    Toshiba Flash Cards
    RAID event monitor

    So, my friends. Could you give a valuable suggestion whether or not it is prudent to disable startup above entries? I want to speed up my laptop at the highest possible level.

    Thanks a lot for your time!

    Kind regards
    Osman.

    My laptop:

    Toshiba Satellite Pro A300-15V (PSAJ5E) => NOT have multimedia keys except the FN keys.

    > Toshiba Button support (why should I this program if my laptop doesn't have multimedia keys? OR maybe this program for something else?)
    You can disable it. If your mobile phone does not support the multimedia buttons then this tool is useless.

    > ItSecMng (although I have disabled the Bluetooth Manager to run when starting from this point still remains in the startup)
    I don't know what would make this process, but you can disable this in msconfig-> tab start Mr. If it would take in the future, then you could turn it on again.

    > Agent of filtering the Conexant high definition Audio (what is this program? Do I really need to start?)
    I think that this is necessary. It could improve your audio

    > Toshiba Power Saver
    This is important. It s an additional saving of Toshiba option for Win 7

    > Toshiba Flash Cards
    This tool controls the FN keys.

    > RAID Event Monitor
    Hmm so you don t have two hard disks, then you can try to disable it too.

  • Satellite P200 - 157 BIOS update failed - need help

    Hello

    I bought a P200-157 to my son in summer 2007.
    My son decide without asking me, upgrade the bios of motherboard with the VICTORY of 1.70 he downmloaded on the Toshiba download server.

    He started the update in windows mode.
    Unfortunalety, the upgrade stopped during the backup previous version. The laptop was frozzen.

    It never boot from the problem of the tha.
    I'm tying to create a crisis, but recovery disk it of seem to exist different versions of PHLASH16. EXE.

    Do any of you know if crisis mode-recorery is available for laptop P200?
    What version of PHLAS16. EXE is required and in what mode the disk has to be create (native DOS mode)?

    I bought a USB external floppy drive and try the last days, but unsuccefully.

    Kind regards. Yves (France).

    Hi dude

    That s a pity :(
    The update of the BIOS is always a tricky process and there is always a small piece of risk.
    Usually, if the BIOS update has failed then you need a help of a technician of the ASP.

    The point is that you would need an update of the traditional BIOS to reflash the chip for the BIOS again.
    But the Toshiba driver page provides only the victory of the BIOS which can be updated only from Windows OS-based.

    Therefore, you will need to contact a local ASP which might help you.

    Dude good luck

  • I need help restoring an old database file.

    Twice within a few years, I met problems with Skype that were only resolved by renaming my account Skype Skype.old and skype.old2. I'd like to get the data from the conversation of those in my current main.db file, but I don't know how to do. If someone does, please tell me in detail what I must do to merge the files and hopefully not break Skype. Thank you!

    This should be possible using the Skyperious application.

    https://community.Skype.com/T5/Windows-archive/importing-old-conversations-into-a-new-computer-with-...

  • I have a toshiba a135 satellite that I need to restore the original settings, I tried the thing (0) but who do not work, help pleaseeeeeee

    Hello everyone, I have a toshiba satellite laptop a135 I need to restore the original configuration. I tried to make the outfit out of service 0 while turning on the pc, but that only takes me to the windows start page. Anyone know a fix for back to the setting rstore factory without cd or media? the cd/dvd drive does not work and the system restore is not working or the other. Help, please?

    Bill, your info was very useful thank you for the help that I could download the correct files and restore my laptop back to the original state. This has solved all the questions I had some and also allowed me to make a bootable file to be used from the cd player and flash drive, once again, thank you much.

  • Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

    My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

    < object edited by host >

    We are users like you.  Search locally by using something like Yelp or similar

    http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

    or read a few links which may be relevant on this forum about the slow mac mini

    http://BFY.tw/5C63

  • new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

    new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

    Looks like you have somehow the mac version.

    Download the updated windows 6.7 camera raw from this link:

    Adobe - Photoshop: for Windows: Camera Raw 6.7 update

  • I need help restoring iTunes from Time Machine

    I lost part of my iTunes library by removing certain albums by mistake and turning off the trash. When I tried to restore the Time Machine's iTunes folder, I got a message that I didn't have enough space. So I tried to simply restore the .itl file. I did once all the missing albums appeared in iTunes - but all the individual pieces were not there - got of exclamation points. I tried to locate to point iTunes to their new location - but I can't find where restoration placed. They are not meed to be in the iTunes media folder or all previous libraries.

    The .itl file is just a style text file with a list of the locations of the files for the track.  You must also restore the real media files.  If you let iTunes organize media, it should be quite systematically arranged in your iTunes folder in Time Machine and you can restore files individual album since you have no space to restore the entire media folder. If they are compiling or several albums of artists tracks can be spread out a little.

  • Error message, "unable to configure windows update. Try to restore the changes.

    Why is it I can't update windows? When I finished my update it says to reboot my PC and restarting, it says "could not configure windows update. Try to restore the changes.

    Please help me solve this problem.

    Hello

    1. the updates of windows do not settle?

    2. don't you make changes on the computer before this problem?

    I suggest that you try the procedure described in the article mentioned below.

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    http://support.Microsoft.com/kb/949358/en-us

    Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

    System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    Note: Before you perform the upgrade in-place, I suggest you to save all your data.

    Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

  • Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

    Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

    Hello

    The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

    http://support.HP.com/us-en/document/c01700855

    Kind regards

    DP - K

  • I need help with the program of Photos on my macbook pro

    I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

    Hi, I'm fighting to open same mine, making a new software update

  • I need help for the upgrade of my current system.

    I need help for the upgrade of my current system.

    I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.

    I want to make the larger environment using the following:

    (1) apply Virtualization

    (2) apply to the failover process (clustering)

    "(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.

    Storage 4) that supports Raid (1 and 5)

    UTM excellent 6) that supports (SSL VPN, VPN Global)

    suitable backup solution 7)

    (8) good antivirus for clients

    my questions:

    (1) can you provide me with a good design for this environment

    (2) should I choose what operating system:

    Microsoft datacenter or company

    I know datacenter provide us the unlimited VM but needs per processor license

    so if I have two Grouped servers I want to buy 4 licenses

    and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?

    (3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?

    (4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?

    (5) what about win2k8 license for VM:

    lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?

    (6) can I use backExec license for SBS with windows 2008 standard

    (7) who better to virtualization AMD or INTEL

    (8) hyper V or VMware?

    (9) what of Microsoft data protection Manager... is this good?

    (10) what virtual machine manager? What are the benefites keys

    Thanks in advance

    Hello AnasAI,

    You can find the Server forums on TechNet support, please create a new post at the following link:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • When I opened outlook express Inbox, all messages have been deleted, please help restore the same

    When I opened outlook express Inbox, all messages have been deleted, please help restore the same

    Go to view | Current view | Show all messages to make sure that you have just selected 'Hide read messages.

    If this does not help, check your Recycle Bin, the bak files which are dbx files, you can restore backups.  See www.oehelp.com/OETips.aspx#2

    If this does not help, then you will probably need my program DBXpress (www.oehelp.com/DBXpress/), which will extract the messages from individual dbx files, and if messages are no longer in the files, it can extract from the disc itself.

    Steve

  • Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

    Original title: need help with the blue screen issue
    My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

    Hello

    1. Since when are you facing this problem?
    2. you remember to make changes to the system?
    3. do you get an error with this error code?

    I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

    Method 1.
    I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
    a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
    Description of the Windows XP Recovery Console for advanced users
    http://support.Microsoft.com/kb/314058
    b. perform a disk check.
    How to perform disk error checking in Windows XP
    http://support.Microsoft.com/kb/315265

    Method 2.
    I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    I hope this helps.

  • im a student at the Academy of art and my creative cloud only let's tracks me because I never offer or give a serial number need help with the application

    I need help for the account and the sotfware please help

    I'll get an update this topic & you update tomorrow.

    Concerning

    Baudier

Maybe you are looking for