New number of hard disk?

Similar Questions

• Satellite 300CDT: number of HARD disk - partitions show only 4 GB

  I have an old Satellite 300CDT, I can't support it appears not yet listed on the Toshiba site.
  I have added a new hard drive and bought a 40 GB drive, but it will only show 4 GB per partition.
  I want 2 partitions that I have and in fdisk I said 50% for each but it only shows 4GB each even though it says support big readers.
  I'm running Windows Me.
  Is it possible for an old laptop of this type to display the size of the hard drive.

  Thank you

  Hello

  Did you use the FAT32 or NTFS?
  I use partition Magic 8 to do and to manage the partitions on the HARD disk.
  In my opinion, you should try this program. I think that using the PM8 you will get the total size of the HARD drive.

• Export the drive letter of windows and vmware number of hard disk in csv format

  Hello

  is there a way to export to CSV, the windows drive letter (c:, d:, e:, etc.) and the number of disk hard vmware ("Disk 1", hard disk 2", etc.) to a csv file?

  Take a look at this document: http://communities.vmware.com/docs/DOC-12180

  It is based on the idea of Hugo Peeters', but it uses the Invoke-VMScript cmdlet and therefore does not require a network connection to work between the virtual machine and your station PowerCLI.

  Export is sent to the Out-GridView cmdlet, but it can be easily redirected to a CSV file by replacing the line:

  $DiskInfo | Out-GridView

  with:

  $DiskInfo | Export-Csv "C:\Script\VMDiskMapping.csv".

• How to get the real serial number of hard disk in a form

  Dear all,
  
  Can I get the serial number of the disk hard real in a form?
  
  Help, please
  
  
  Thank you

  It seems that HOST() set some environment variables, then the path to the wmic.exe is not found. The following works for me:

  host('cmd /c "c:\windows\system32\wbem\wmic path win32_physicalmedia get serialnumber"'||' > '||'c:\AA.TXT',NO_SCREEN);
  

  François

• New update of hard disk for Satellite L670D-102

  Hello

  I need to get windows 7 on my old hard drive and on my new hard drive update. I can't find "media copy" file/folder. I did a windows disc when I arrived as he forced me to do but only loads a 'safe' version of windows on the new hd and wonder for other discs.

  Local dealer believes there are 3 back up discs to load up. I tried to save, but it takes more than 7 DVDs and still unfinished when I run out of time. Takes all day to do it. I tried an 'image system' through the windows and that works, but said that the new disk is the same size that the old image of disk system has been removed. Old drive 250 GB I think, new drive is 1 TB. Local dealer said try to reset the computer to the factory and see if "copy media" thread/folder reappears.

  Someone at - it ideas please!

  Message has been modified: the model name added to title

  At first, I must say that you must tell us which model of laptop you have exactly.

  In general the whole situation is pretty simple. Your laptop came with the version of the OS pre-installed (recovery image). Using preinstalled Toshiba media creator you recovery tool can create bootable recovery (DVD or USB) media that you can use for the installation of recovery.

  After HDD just change boot image recovery this recovery media created facility.

  To be honest I do not understand your ad and you wrote all this has created media.

• How can I go on my new Windows 7 hard disk partitioning?

  HP Pavilion P7 - 1187c

  Windows 7 64 bit

  The unit is new just out of the box.  I want to partition the drive into 2 partitions equal additional (4 of which 2 existing.  (for example.  existing partitions are approximately 2 GB and 12 GB I guess).  I want to leave the quiet recovery partition and expand c / 30 GB (if necessary).  Divide the balance in 2 sections of additional disk.  Is this possible?

  texcajun wrote: unit of HP Pavilion P7 - 1187c Windows 7 64-bit is new just out of the box.  I want to partition the drive into 2 partitions equal additional (4 of which 2 existing.  (for example.  existing partitions are approximately 2 GB and 12 GB I guess).  I want to leave the quiet recovery partition and expand c / 30 GB (if necessary).  Divide the balance in 2 sections of additional disk.  Is this possible?

  Hello texcajun, you should be aware that the Windows operating system will only allow a maximum of 4 primary partitions.

  Your hard drive has probably already created 3 partitions. It is more likely is the 100 MB system partition, the partition C:\ and the D:\ Recovery partition.

  It may be possible to create additional logical partitions, linked to the primary partitions.

  Just some thoughts.

• Missing originals after copying photos for a new mac external HARD disk library. How to fix this?

  Move the library of photos hosted on an external HARD during a new mac disc.

  I can open the app and import new pictures, but I can't change any of my previous photos because he complains that the original is not found. The "Use as system library" button is gray which implies that the current library of photos on the new mac is defined as the system library.

  I still have access to the external HARD drive that I imported a couple hundred new photos for the new mac.

  How can I fix?

  How did you set up your library.  You use a library "referenced"?

  

  If Yes, then you have lost the links with the original files.

  You have the iCloud library enabled in the preferences of the iCloud photo Panel?

  

• Windows XP Pro not be assigned a number of hard disk to an external USB storage device

  I can see the SanDisk USB mass storage device manager devices under the USB connection or hard drives. But cannot see it in disk management.

  Screenshot here

  The site better troubleshooting for problems of USB that I found is this:
     <>http://www.Uwe-Sieber.de/usbtrouble_e.html >
  At the very beginning of the page is the problem "No Drive Letter".  Try to go through the suggestions.

  HTH,
  JW

• How to change the application installed HARD disk?

  My PC following setting:

  C: is for Window XP OS

  D: is installed application

  because the disc is not enough space and need to buy a new SATA III HARD disk after formatting under drive Z:

  I copy everything in D: z: readers and I would exchange the disks for the following parameter:

  D: old drive will become Z: drive for backup

  Z: old disk will become D: drive for installed application, because many applications and installed adjustment use the D: drive for application, so I'd like to preserve the D: drive for application, but I get no idea on how to swap the disks.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  This article describes how to change the drive letters on drives:

  "How to change drive letter assignments in Windows XP"
    <>http://support.Microsoft.com/kb/307844 >

  HTH,
  JW

• My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  My MacBook Pro suddenly crashed. I lost all the programs, including InDesign CS6 I use the most. I installed a new hard disk, can't find my license number. How can I install CC? Adobe does not accept my address, no credit card no etc.

  Find your http://helpx.adobe.com/x-productkb/global/find-serial-number.html serial No.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

• CS5 Design Standard. Will not activate on the new HARD disk following transfer of old HARD drive. Displays error 213.10 have number series/s etc.

  I recently encountered a problem with a HARD disk drive. So I had to replace it with a new one. Fortunately, I managed to recover the data and applications on the original disc.

  However when I transferred and installed after Adobe CS5 Design Standard on the new HARD drive it will open all Adobe apps.

  He invites a 213.10 error every time. I do not see where to disable or reactivate... Please notify suggested action plan.

  Also, I'll be able to successfully access my previous files after the relocation/activation?

  Thank you very much

  R

  Reinstall correctly. Activation does not work because in the technical sense is not simply there. Screw you them. Run the cleanup tool if necessary and contact support to reset the activations.

  Download the CS5 products

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  Mylenium

• the new hard disk OS installation - help! 1

  has confirmed that my old hard drive on my laptod hp is broken.

  new hard drive came - still in packaging.

  What should I do next, after the installation of the hard disk that is the easy bit - thankfully I did of the disks when I first bought the old laptop and the windows license number is still visible under the cover of laptop.

  I read something about BIOS, but it sounds scary.

  go for a drink and the Dutch courage and hope a few simple tips please!

  concerning

  Ian

  If you have the recovery disks, they should include your operating system (Vista) and all the drivers and programs provided with your computer. He must restore it to the way it was when you bought it originally.
  
  You need to update right after installation (of course).
  
  Good luck!
  
  ~ Corey

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• Help! Installation of HP Vista recovery disks to a new HARD disk

  I found the same problem in this forum and several others online, but have not been able to find one with a solution!

  I have a HP Pavilion Notebook DV6633US

  It has a 120 GB of HDD with Vista Home Premium

  I created recovery discs when I got to the computer

  Last week, crashed HARD drive.

  I bought a new Western Digital HARD drive (the original in the laptop was a Seagate)

  The Western Digital graphic shows the compatibility with my laptop specifically

  I upgraded from the 120 GB to 160 GB

  I tried to run my recovery disks

  It installs the necessary boot files, runs the Windows progress bar and then goes to a blue screen with an operable mouse cursor and an error message that says:

  "This PC is not supported by the system recovery discs. You can continue to recover this system with these discs. »

  The laptop is out of warranty at this stage.

  I contacted Technical Support HP in 2 ways and got 2 different answers. I don't know who to believe and do not want to take the time or spend the money on ordering the wrong solution.

  Technology through the Online Chat support says:

  My recovery disks have "gone wrong", and I need to order new HP.

  They insist that will not solve the problem, but I have read in several places online is not the solution

  Technology through support email wrote:

  If I buy a hard drive through a third party, no HP recovery disk will work and I need to buy a new installation of Vista (obviously expensive);

  Just bought HP hard drive works, it comes with its own recovery disks. The recovery disks have a tatoo/signature for specific hardware.

  The HARD drive I bought was reduced to $40. The HP HARD drive is $ 130.

  A ride more. If the HARD drive has a tatoo/signature on my initial, recovery discs - it true for other components?

  While it was still under warranty, I got a CD/DVD defective drive replaced, also a defective mother replaced, and I added the additional RAM.

  I saw several other posts with the same question and a number or suggestions are displayed, but it seems that they never send once they have found a solution that worked.

  Before I bite the bullet and spend the $130 on their HARD drive I want to be sure that will work, and if there is a way I can make it work with the HARD drive that I have bought, I would of course like to do.

  Here, any help would be greatly appreciated!

  SOLVED!

  The recovery discs HP factory arrived today and they work... It installs my original factory image as I type!

  It's been almost 2 weeks to get this figured out, but it does not work... so if my omitted self-created recovery discs can be used on a new HARD drive, the factory recovery disks succeeded.

  I just wanted you to know everything for the next person can find the solution that actually worked.

  Thanks for the help and comments!

• When installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system?

  Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.

  Original title: used to install Windows 7

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Also check Home Edition free Partition Wizard option "Test of disc surface":
  http://www.partitionwizard.com/free-partition-manager.html

  J W Stuart: http://www.pagestart.com