New owner of the S50 8429 installing 2 GB of RAM dual channel

Similar Questions

• I'm the new owner of the iphone 5 and past owner forgot him I cloud how can I do this help me

  I'm the new owner of the iphone 5 and the last owner has forgotten her icloud to activate account. Please help me thanks

  No one can help, you must get her to unlock the iPhone, or you cannot use it. I would ask your money back at this point.

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Very proud new owner of the Qosmio G10

  Hi, just thought id' say hello, like a new owner Qosmiao G10, I run an it company in are *, UK and we are a Dell, HP and Microsoft Training Center.

  I've had loads of laptops over the years, got cela today and wow its amazing!

  I have a small form of Media Center PC but it is really beautiful.

  My business partner will be get tomorrow I think!

  Paul

  Hi Paul

  I am very happy to hear that you are very satisfied. I use Tecra laptops for a long time (because of my work), but I am also interested in the Qosmio series. Qosmio G20 is my favorite, but for a short period, I bought TV with HDMI output.

  I think that Toshiba will create new laptop Qosmio with this port. On this path I connect to my LCD TV and have the best possible image quality.

  Good luck and have a nice time with your new toy!

• G7-1329wm Pavilion: 1329wm RAM Dual Channel. Update the bios?

  I bought 8 gigs of RAM laptop for my G7-1329wm Pavilion. Here it is:

  http://www.Amazon.com/GP/product/B00OUK919M?PSC=1&redirect=true&ref_=od_aui_detailpages00

  

  It is already much faster than what I had before. My problem is that I expected to run at a speed of 2133 MHz and dual channel mode. CPU - Z does not have these results.

  

  The two RAM slots show the same thing.

  It made me start to wonder. Maybe my cell phone does not support dual channel mode or these speeds. So I was wondering if I could do a BIOS update if everything goes well accept more modern equipment and their speed. I checked in CPU - Z that my bios is old path, return from 2012. I couldn't find any support for an update through HP. Can an HP expert please let me know what I can do to get the most out of my RAM speed?

  

  Repair:

  DDR3/1333 MHz (DDR3-1600 (1 GB / 2 GB / 4 GB / 8 GB) modules of memory supported as an alternative source for the DDR3-1333)

  So max the card/motherboard/BIOS processor speed will allow the memory runs is at 1333 mhz. I'm frankly surprised the memory you have installed works at all. It's the equivalent of putting gasoline in an engine that can be only ordinary.

  The problem goes well beyond BIOS. The chipset can operate at the maximum of 1600 mhz, and HP has set up to run at 1333.

  It is the specified memory:

  Memory modules (DDR3 10600 1333 MHz 2): 4 GB 621569-001

  http://www.Amazon.com/HP-621569-001-1333MHz-PC3-10600-SODIMM/DP/B005UF674S/ref=sr_1_1?ie=UTF8&QID=1457907477&SR=8-1&keywords=621569-001

  It may seem paradoxical, but your laptop can actually run a little faster and in double channel if you put in the slower memory. You can see there is a lot of information in gray in the CPU - Z I think because the system is not able to see all the technical features of memory, that she does not expect to be there.

• Absolutely new Z10 smartphone blackBerry user, a senior, new owner of the BlackBerry Z10, you have questions a little later

  I am a new user of a smartphone and a BlackBerry, a Z10 with Bell, I'll give you the mandatory model number when I have a specific question.  I am 2 days in this, still getting the thing 'gesture' down pat, I'm not too good at this but the representative showed me.  Not a shot on the table-toss-away motion.  There seems to be some screen pages that don't gesticulate to the small size of box at all, as far as I know, some people, when they may be X'd OFF... but they seem to go away once as the main icon screen is in place for a bit...

  I have a message for the company of BlackBerry and it is, please add some info on your User Guides and instructions on the Web pages [this is written on my laptop, I gave the Z10, a rest] for THE BEGINNERS of SMARTPHONE.  They generally speak to previous owners of older models BlackBerry or those who know the fact and not the person like me who has to learn to 'gesture' and tap and "stationary", etc...  It is covered too quickly and too not clear in videos and demos, you have online.

  I fear this could cause frustration for new users... in any case, I'm persistent.

  Please persevere.

  I have to admit that the Z10, great as a phone as it is, is not the beginner phone. Even I, with years of experience of BlackBerry, took some time to adapt to it. Once you get the hang of it, you'll see that it's the best smartphone that you can buy. Until that happens, I hope that you'll hang in there and give him a chance.

  See you soon.

• What happens if I restore and configure my iphone like new without having the latest iOS installed on the device?

  I intend to restore my phone. Currently installed 8.3 iOS and iOS 9.1 is available to me. But I don't want to upgrade to iOS 9. It will ask to update iOS 9 after restoring? Help, please

  He won't ask. It will just upgrade to the current version of the iOS when you do a restore via iTunes.

• Transfer of license to the new owner

  I want to transfer the license to the new owner, but the www.adobe.com/go/supportportal link does not work, what should I do?

  Here you go: transfer an Adobe product license

• New owner of seniors, out of warranty machine... now what?

  I just restored a p6226f old Pavilion of 4 years which was intended for recycling. This machine has a larger capacity and is more powerful that Office I have used, but was ruled out due to being 'irreparable '. I restored it to factory conditions. I'll take it online to get and install all security updates (MS more HP, etc), but then what?

  1. I'll be able to run the trial software versions, even if they were already installed once?

  2. what happens when I join the BONE under the same product code? Who warn that there is a new owner for the transfer of licenses?

  3. fill the registration will create conflict with the news of the former owner being associated with this serial number, etc?

  Anyone have any suggestions for what I need to do to fully legitimize this machine and its software?

  Thanks in advance!

  Microsoft will not come after you for your newly acquired HP computer. Your desktop HP Pavilion p6226f come from the factory with Microsoft Windows 7 Home Premium (64 bit) installed and pre-activated. When you picked up the system, the other day, he has been once again pre-activated. Pre-activated means that Windows has been activated without having to go online or call Microsoft. This is entirely on the computer using a special HP OEM Windows key (not the one on the side of the computer), a special HP OEM certificate and a special table in the BIOS.

  If you want to see for yourself, try this;

  Download and uncompress ABR Beta with Windows 7 Support. This is the homepage of ABR for Windows Vista. Please follow the section "How to use" for information and instructions on how to use it. These steps also apply to Windows 7. Perform the 'activation' on your computer backup and save the certificate and the key has been recovered on the 'bureau '. Now open the file 'backup-key' and to compare this key on the side of the computer. Not even close to the same thing.

  Please send Bravo

• Owner OF THE LICENSE No. [removed-kglad], PREVIOUSLY INSTALLED on OLD PC WHO CRASHED. HOW AND WHERE TO FIND THE NEW DOWNLOAD FOR THIS NEW PC. LICENSE FROM A USER OF MAY 2011.

  Owner OF THE LICENSE No. [removed-kglad], PREVIOUSLY INSTALLED on OLD PC WHO CRASHED. HOW AND WHERE TO FIND THE NEW DOWNLOAD FOR THIS NEW PC. LICENSE FROM A USER OF MAY 2011.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• How to change the name of the device (MacBook Air) to a new owner?

  How can I change the name of the device (MacBook Air) to a new owner?

  You change the name of the computer in the sharing preferences, if that's what you ask the subject. If this isn't the case, then be clearer on what you need to know.

  If it is a computer newly purchased but used, then wipe you the drive and reinstall the original version of OS X that comes with it. So let the new owner set it up: what to do before you sell or give away your Mac - Apple Support.

• Installed a new button from the home screen, I shouldn't have to update software?

  Hello

  My home screen button and screen had cracked and I've just fixed. I was told by the repair iphone specialist do not update my phone more because the phone could brick because of the new button on the home screen that has installed.

  My impression fingerprint sensor works now more for the phone this new button.

  With an update, a software update will brick my phone? I'm on version 9.2.

  Thank you

  Unless your screen was repaired by Apple or an Apple authorized repair center, it will not work properly again. The ID of touch will not work. At this point, so you should not try to update of iOS, as this will brick your phone.

• my new laptop does not detect the USB for installing the os

  I bought the new laptop hp 15D009TU . I want to install win7 in there. I have OS configuration is USB, but my laptop does not detect my

  USB key... Please solve this problem as soon as possible...

  Hello

  Install the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66210.exe

  Restart the laptop, then install the driver usb 3.0 below.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66211.exe

  DP - K

• my computer is connected to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture on the projector

  I connected my computer to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture of the projector, need HELP.

  Hi Bill,

  Thanks for asking this question to Microsoft Community.

  I will definitely help you to set up the projector, but before starting, I would ask you some troubleshooting questions.

  What version of the Windows operating system is installed on the computer? Do you get any error messages? Have you done a recent software or changes to the material on the computer?

  Here is a link that provides information on connecting to a projector. Go through it and check if it helps.

  Hope this information is useful and provide us with more information for further assistance. We will be happy to help you.