Very proud new owner of the Qosmio G10

Similar Questions

• I'm the new owner of the iphone 5 and past owner forgot him I cloud how can I do this help me

  I'm the new owner of the iphone 5 and the last owner has forgotten her icloud to activate account. Please help me thanks

  No one can help, you must get her to unlock the iPhone, or you cannot use it. I would ask your money back at this point.

• The Qosmio G10 DVD burner replacement

  My DVD burner was unable to get out and must be replaced. It is a UJ - 831S. I bought the same one, but I got an error of CD-ROM at the beginning upward. I tried this new CD-ROM on another laptop (Toshiba Satellite 2800-300) and it worked fine. I think I have a problem with the configuration of my DVD burner (c - select, master...). Do you know if can change the firmware of my DVD writer?
  Thanks in advance,
  Alain

  Greetings Alain,

  Yes, the problem here is the ID of engraver of DVD (CSEL) UJ - 831S. You must have the carpet * a DVD burner connected to the secondary IDE Atapi port as a master flash.
  Probably your G10 is recognizing as an oucederomsurlesecondport IDE IDE slave secondary.
  Unfortunately there is no firmware to change the internal Atapi drive ID.
  You can ask Toshiba for the firmware, but I think that they will not give him to you.
  The best thing is to share the UJ - 831S for the carpet * 831B - UJ part number: P000409790 Qosmio G10 model: PQG10U-00Y00L,.
  Please confirm first if your G10 model.
  When you go to the Exchange, please ask them to first test the DVD player. Better not make mistakes, here.
  All of these discs are Panasonic (mast * one) corporation.

  Good luck
  Francisco

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Vertical lines on the Qosmio G10

  My Qosmio G10 have vertical lines on the screen even on monitor external it show the same problems, tried to reformat using the supplied media center disc have the same problem also, system hangs when installing the video driver, try Booting to CD bootable always vertical BACK appear, I hope that the guys at Toshiba can give us a good explanation for this really upset by this problem our company buy 3 this G10 and two of the three have this problem.

  I put t know if you meet here someone of the Toshiba because this community is only a user to user forum, but I'll try to give you an opinion.
  It seems that there must be something wrong on the graphics card on the map.

  You don't have a lot of options... try to communicate with the service authorized in your country guys
  Probably they know something more about it

• Windows XP Home edition does not recognize new HDD on the Qosmio G20

  I have a Qosmio G20/390LS bought a year ago, when I worked at the Japan, I tried to upgrade the hard drive with a new HD 100 GB Hitachi SATA but I faced a problem that XP does not recognize the HD.
  For your reference, the Bios sees the new HD, when I install the XP operating system I load the driver downloaded from the Toshiba Web site but no way RAID with F6... XP does not recognize the HD.

  Do you have any idea how to fix?
  Thank you

  Hello

  Computers portable Japanese are unknown to me, but if this laptop comes with two hard drives and RAID option do not forget the good option is set in the BIOS. Without the right BIOS setting you will not be able to install the OS.

  On Qosmio G30, I was able to install Vista when for two HDD HARD drive settings were 0-RAID-1. Check it please and let us know.

• Absolutely new Z10 smartphone blackBerry user, a senior, new owner of the BlackBerry Z10, you have questions a little later

  I am a new user of a smartphone and a BlackBerry, a Z10 with Bell, I'll give you the mandatory model number when I have a specific question.  I am 2 days in this, still getting the thing 'gesture' down pat, I'm not too good at this but the representative showed me.  Not a shot on the table-toss-away motion.  There seems to be some screen pages that don't gesticulate to the small size of box at all, as far as I know, some people, when they may be X'd OFF... but they seem to go away once as the main icon screen is in place for a bit...

  I have a message for the company of BlackBerry and it is, please add some info on your User Guides and instructions on the Web pages [this is written on my laptop, I gave the Z10, a rest] for THE BEGINNERS of SMARTPHONE.  They generally speak to previous owners of older models BlackBerry or those who know the fact and not the person like me who has to learn to 'gesture' and tap and "stationary", etc...  It is covered too quickly and too not clear in videos and demos, you have online.

  I fear this could cause frustration for new users... in any case, I'm persistent.

  Please persevere.

  I have to admit that the Z10, great as a phone as it is, is not the beginner phone. Even I, with years of experience of BlackBerry, took some time to adapt to it. Once you get the hang of it, you'll see that it's the best smartphone that you can buy. Until that happens, I hope that you'll hang in there and give him a chance.

  See you soon.

• PAL/SCART option disappeared on the Qosmio G10

  Used the D-video pal/scart out on G10 for some time. Initially tried out D-video with TV with entry then SCART end 3 RCA out pins of the SCART adapters due to SCART unavailable in Cairo.

  Everything worked OK, but after a while THAT PAL/SCART disappear from the list of TV formats list. PAL/SCART out is missing in the settings if using ESC, F1 during the startup.

  HELP PLEASE!

  Hi palanez

  If I am you understand you right wrote about the BIOS settings. I can't imagine that some BIOS setting can disappear without any reason. You did some changes such as updating the BIOS?

• Manual/Guide to disassemble the Qosmio G10

  Hello

  Just a question. Does anyone have a good link or a guide for when you want to open the G10 Toshiba? I have no guarantee more and unforutnately, I believe that the graphics card is dead, but I just want to know that.

  Thank you
  Blunder

  Hello gaffe

  It won't be easy to find something like that because dismantling manuals is not a public document. You may be lucky and someone can help, but if you think that the graphics card is dead you must swap the motherboard together.

  While you wait for instructions for disassembly, look around and pick up info how much it will be cool.

• New owner of the S50 8429 installing 2 GB of RAM dual channel

  Hi all
  All updated / maxed out the memory on one of them?
  I'm looking to install 2 sticks of PC2700 or faster, but I'm not sure which is compatible with this motherboard.
  I know IBM sells ram, but it seems a little expensive compared to other sites.
  Hope someone has an answer.
  Best regards
  C

  If you get a pair of DDR RAM from the same manufacturer that should be good, as long as they are the same, then running in dual mode channel should not be a problem...

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Qosmio G10-105 t - it work fully to the Canada?

  Hello, I live in the Canada and I think to buy the Qosmio G10 Toshiba Europe. Is could someone please tell me if the computer will work correctly in the Canada. In addition, if there are problems would I be able to correct by the purchase of additional hardware to Toshiba Canada.

  Hello

  Can you tell me please why would you buy laptops from Toshiba Europe? Is there a reason for this?

• Qosmio G10-122: I can't find the Qosmio player

  I buy the qosmio g10-122, but I can't find the Qosmio player in Notepad.
  I need this software and I will download this Internet but I'm not sure this could work whith my laptop.

  Hi Adriano.

  Have you checked all the stuff that was delivered with your Qosmio? There the Qosmio player installation CD?

  QOSMIO player is already preinstalled on your laptop on a hidden partition. Check the user manual. There is a detailed description how it works exactly.

• Transfer of license to the new owner

  I want to transfer the license to the new owner, but the www.adobe.com/go/supportportal link does not work, what should I do?

  Here you go: transfer an Adobe product license

• Qosmio G10: Question about motherboard replacement

  I bought the G10 around 2 years there are in the United Kingdom and who now live in New Zealand.

  I would say it has been a faithful companion, but looking back it cost much to get anything done, because of the ridiculous prices of the FSA.

  I experienced a power supply, two hard drives, my touch pad no longer works and now the GPU (graphics card) is dead.

  I'm sure that most of the people on this forum knows, that is, replacing the motherboard because it is on board.

  I am out of warranty and replacement cost is more than a qosmio second hand of the same age.

  Having done a lot of research on the internet about it.
  I found out that Toshiba US will free of charge replace the motherboard. I asked Toshiba AUS/NZ and they refused him, that it was not a problem.

  Toshiba UK/Europe does, or is it just the Toshiba US that cares about its customers?

  [Edited by: admin on 20-Sep-2007 07:11]

  Hello

  It's very sad to hear that! :(
  I want to share my knowledge on the Toshiba us and Europe.
  As I know the Toshiba us has nothing to do with Toshiba Europe or Australia/New Zealand.
  Portable computers designed for the American market are simply different and also supports different parts and numbers; for example the Qosmio G10 or G20 are not available in the United States but only the Qosmio G15 or G25, etc.

  If you have problems with your hardware, you must contact the partner service manager authorized in your country for further assistance.

  Regarding your question.
  Yes, it really looks like a malfunction of the GPU (graphic processor unit). This graphics chip is fixed on the plateau and in the majority of cases, the whole Board needs to be replaced!
  As you know, these hardware problems could still happen because the new age books are of the high-end products that work always with high performance.
  That s nothing unusual.

  I bought a year ago from G20 and I bought an extended warranty on avoid such troubles.
  So, I always recommend buying the extended warranty in the future.

  Good luck and best regards