New parental restrictions of questions

Similar Questions

• Script XMLrule or? to group items in the new parent?

  Back after a few weeks on an urgent project no more certain Adobe recovery ...

  I wonder if anyone has XML / XMLrule sufficient experience to give me at least a hint on the challenge according to script. I discovered scripts online tutorials, documents and example files (huge collection)... unfortunately I can not find even the beginnings of something to address that resembles a common challenge for me and highly scriptable.

  My example is below. I can't find snippets of code for one of the following:

  -Browse a set of items to search for and select a set of desired of the elements

  -insertion of a set selected (range?) of the elements in a new parent

  It's pretty clear when performed manually in the UI, but opaque in the script / XMLrules environment.

  Anyone has any advice? Or a book / resource that is hiding enough deep?

  Thank you very much

  Pete

  ----------------------

  Example of the problem:

  Imagine a certain level of a structure of tag that you have ANY kind of repeat the sequence of the tag. For example (in form very abbreviated)

  < people >

  < name >

  < address >

  < Phone >

  < name >

  < address >

  < Phone >

  < name >

  < address >

  < Phone >

  <>projects

  < name >

  < startdate >

  < enddate >

  < name >

  < startdate >

  < enddate >

  What I want is sets of elements under a new parent group, something like

  (almost)... GatherElementsUnder (XPath, StartWithElement, NewParentElement)

  That is to say

  GatherElementsUnder(/people,name,person)

  GatherElementsUnder(/projects,name,project)

  would produce

  < people >

  < person >

  < name >

  < address >

  < Phone >

  < person >

  < name >

  < address >

  < Phone >

  < person >

  < name >

  < address >

  < Phone >

  <>projects

  < project >

  < name >

  < startdate >

  < enddate >

  < project >

  < name >

  < startdate >

  < enddate >

  I answered this now. Manuscript sample, as well as comments link, is here: http://forums.adobe.com/message/4963977

• Adding a new parent entity is in conflict with existing parent adjustments

  Hello people,
  
  I am trying to add a new parent entity in the entity dimension, but get an error message when loading the metadata. The message basically says that there is some adjusting parent entries exist for this new parent children and, of course, the conflict arises with the new parent.
  
  How can I go about it? I don't want to remove these magazines to fit existing parent so not to disturb the earlier codifications.
  
  Help, please!
  Any ideas would be greatly appreciated!
  
  Kind regards
  
  Polina Kornyukhina, Toronto
  Upper Lakes Group Inc..
  416-960-4416.

  I would create a new entity just below the initial parent. Then change all entries for this entity (and not Parent Adjs). Then add your new parent entity and move the members of base under him. It should preserve the old numbers while allowing the living structure of the future State.

  As a general rule, I guide people away from Adjs Parent whenever possible.

• Create new Parent Member for current members

  Hello
  I have a rookie question for you. I have version 9.3.1.
  
  We have a dimension that has a number of related members. I want to create a new Member parent for these related members, using planning, screen size. I can do that, and the data will go with it? Can I cut and paste the members or the buttons they will move into alignment?
  
  Thank you

  No data will be affected until you refresh to essbase data will remain against members when you move, you will probably need to recalculate totals.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• When I change something on security on my ID must be answered first ask the question what city meet my parents and 2nd question asking my best teen kindly helps a friend me

  I have my iPhone dicice 5s that fall into the water are all gone now, I have 6 s iPhone and try to restore data from Icloud, but when open my ID question 2 which, what city you parents encounter and which is better, your teenager, pickled

  kindly help me out on this issue.

  Thank you

  Florent

  See: If you forgot your Apple ID - Apple Support security questions answered

• Control parental iPod touch questions please

  Hi, looking to get the iPod touch for my 11 year old, don't want him online without supervision.

  (1) can I block the internet connection >

  (2) you can't just overide the parental control with a hard reset?

  (3) if the hard reset is done is there a notification or a way to see this has been done?

  Sorry for sounding just OCD try to keep possible safe.

  Thank you gas

  I have not tried to use them for good, but take a look at Use of Restrictions on your iPhone, iPad and iPod touch - Apple Support. If you block Safari and control what applications are installed, then you have effectively blocked the access to the internet. If you enable the app FindMyiPhone phone cannot reset to factory settings unless you choose to unlock.

  TT2

• New on Apple computers - Question on the use of the memory (RAM)

  Hello

  I recently bought a rMBP 13 "with 8 GB of RAM. This is only my third time (I started for the first time last night). Here is a screenshot I took of the memory usage after starting it on for the first time. My question is: is it normal to see that most of the memory is in use, even if I only have Safari (1 inactive tablet on the homepage of Google) and open the activity monitor? I'm afraid that this is rare and not have a lot of wrong answers online.

  Second question, if someone has knowledge: 8 GB of RAM is good enough to run software such as MATLAB, AutoCAD and SolidWorks? Or 16 GB would be better? I still have time to exchange the rMBP.

  

  ElCapitan is designed to use as much RAM as possible at all times for efficient operation.  She will move to a video buffer, operations of common files, etc. in the RAM and the y keep in case he should run again.  CBS will move embusked operations out of RAM if new operations is displayed.

  As for "enough RAM for your planned tasks", 8 GB might be enough, given the fast read/write of the SSD and the very fast moving data in the SWAP file on the SSD.  But if you have any doubt, you have 14 days to return without any doubt and re - buy a Go 156 system.

• Data to be moved to the new storage array: ASM_POWER_LIMIT question

  DB version: 10.2.0.4
  Solaris operating system: 5.10
  Setup: 2 NŒUD RAC storage 2 TB of data in 4 LUNS (all 4 LUNs belong to a single storage group)
  
  We will replace our IBM 2 existing a new 4 TB storage array to Sun Storagetek.
  
  That's what I decided to do after a few R & D.
  
  Below are the steps that I've prepared based ML Note: 557348.1
  
  Create 4 LUNs on the new storage, and then create a test using Diskgroup
  

  SQL> CREATE DISKGROUP TEST EXTERNAL REDUNDANCY DISK '/rdsk/c0t1s1', '/rdsk/c0t1s2', '/rdsk/c0t1s3', '/rdsk/c0t1s4';

  Check if the diskgroup is created and mounted:

  SQL> SELECT STATE, NAME FROM V$ASM_DISKGROUP;

  If so, then manually mount on other instances of ASM:

  SQL> ALTER DISKGROUP TEST MOUNT;
  SQL> SELECT STATE, NAME FROM V$ASM_DISKGROUP;

  If the previous steps were successful and the diskgroup TEST can be mounted with success (on each ASM instance), and then drop the diskgroup TEST as follows:

  SQL> alter diskgroup test dismount; --(from all the ASM instances, except from one).
  
  SQL> DROP DISKGROUP TEST; --(from the ASM instance, which the diskgroup is still mounted). 

  Records of candidate is ready to be added to the desired diskgroup:

  SQL> ALTER DISKGROUP <my production diskgroup> ADD DISK '/rdsk/c0ts1', '/rdsk/c0t1s2', '/rdsk/c0t1s3', '/rdsk/c0t1s4';

  My question:
  Since involved LUNS are of large size, and rebalancing would make the command Add DRIVE slower. Right?
  I am thinking of setting the ASM_POWER_LIMIT to 0 until I started to do this and later new rever to 1. Is this a good approach?

  Hello

  My question:
  Since involved LUNS are of large size, and rebalancing would make the command Add DRIVE slower. Right?

  No, when you run the command ' add/drop disc' ASM reads and writes only metadata in the headers of all asmdisks (belonging to the diskgroup) and the guest is released.
  The complete rebalancing of the data process runs in the background.

  The fact that the guest to be released does not mean that the operation has ended. You need to check on the V$ ASM_DISKS (GROUP_NUMBER, PATH, HEADER_STATUS, NAME) to determine if you can remove the disks to the HOST.

  see this example (no difference at the time of change of power of rebalancing)

  ===================================================
  
  SQL> ALTER DISKGROUP DG_DATA
          ADD DISK '/dev/oracleasm/disks/ASM_VOL'
          DROP DISK DG_DATA_0000
  REBALANCE POWER 0; 
  
  Diskgroup altered.
  
  Elapsed: 00:00:07.90
  
  ====================================================
  SQL> ALTER DISKGROUP DG_DATA
          ADD DISK '/dev/oracleasm/disks/DISK01'
          DROP DISK DG_DATA_0001
  REBALANCE POWER 5; 
  
  Diskgroup altered.
  
  Elapsed: 00:00:08.21
  

  I am thinking of setting the ASM_POWER_LIMIT to 0 until I started to do this and later new rever to 1. Is this a good approach?

  You must know that the rebalancing will take place when there is a change of configuration diskgroup.
  Be careful, affecting the ASM_POWER_LIMIT 0 can let the diskgroup in a State of imbalance or unbalanced. (I do not recommend this)

  My recommendation:

  (* 1) save all your databases and valid backup (always required to protect your data). *

  You NEED to check the note below before add your ASMDISK.
  * Block Corruption in ASM while that balance [ID 1098453.1] *.

  2) run in two steps

  alter diskgroup  add disks  rebalance power x;
  alter diskgroup  drop disks  rebalance power x;
  

  Or Execute in a single step. (My favorite)
  Alternatively, we can run add disk & drop drive statements in a single operation, in what way that a rebalancing operation will be launched.

  alter diskgroup 
   add disk 
   drop disk 
  rebalance power 9;
  

  Wait until the end of the operation of rebalancing.
  You can follow the process of rebalancing using the following queries:

  SELECT  NAME,
       PATH,
       HEADER_STATUS,
       ROUND(TOTAL_MB/1024)  TOTAL_GB,
        ROUND( FREE_MB/1024) FREE_GB,
       ROUND((TOTAL_MB-FREE_MB)/1024) TOTAL_USED_GB
  FROM V$ASM_DISK
  WHERE GROUP_NUMBER= (SELECT GROUP_NUMBER FROM
       V$ASM_DISKGROUP WHERE NAME='DG_DATA');
  
  select * from v$asm_operation; 
  
  select * from gv$asm_operation;
  
  select      NAME,
       ROUND(TOTAL_MB/1024)  TOTAL_GB,
       ROUND( FREE_MB/1024) FREE_GB,
       ROUND((TOTAL_MB-FREE_MB)/1024) TOTAL_USED_GB,
       UNBALANCED
  FROM V$ASM_DISKGROUP;
  

  Kind regards
  Levi Pereira

• Relatively new user with specific questions of CS5.5

  Hello and thanks for reading.  Still, I work in CS 5.5, which makes an ActionScript 3.0 project, but who has not yet played a role.  Here are my questions:

  1. I tried to import a .bmp of ms paint.  "import to the stadium" is grayed out (why?), so I imported to the library.  Then I found a video that told me all I had to do was drag the image from my library on the stage.  It did not work, and Yes, I was working on a layer visible / top.

  2. can I draw something and then create another keyframe in which I increase the height and the width of my drawing and then create a Tween to the object of 'growing up' to the new size?  He has not worked for me.  Of coarse it works for forms created with the form tool, but I restored a heart as well as lines and it grows has ' a nice classic Tween.

  Thank you for your time.

  1. your selected layer is locked.

  2 interpolation requires practice.  You can only "an object" tween layer.  for example, if you have a background and outline of a layer, you cannot tween it.    to remedy this, insert the race in a single layer and fill in another layer.  each layer can be interpolated.

• new here... question to start with

  Hello world...

  New to the forum and glad to hear things with Dreamweaver.

  A question to start with... How does a program Dreamweaver so that it automatically reformatted in different browsers (sizes).  Is it still possible?

  Cheers...

  Twingi

  How does a program Dreamweaver so that it automatically reformatted in different browsers (sizes).  Is it still possible?

  It is certainly possible.  Tell us what you mean by 'formatting automatically' and we will tell you how to do it.

• A new YouTube-Apple TV question that has not been requested here!

  A few years ago, I bought 2 apple TV.   One of them I gave to my daughter and her husband and I kept.   As everyone knows, who has more AppleTV, earlier, YouTube has been removed.   We found that it was because Google has changed the app so that it only worked on the latest AppleTV.   Well, I was resigned to it and decided I would get a new when I had the money for it.  Time passed.

  BUT a few weeks age, my daughter told me that YouTube has suddenly appeared on his Apple TV!  Amazing!  But he did not go back on my own!   I checked my updates and I later.  So what's happening?  Why it come back for her and not me?   And there at - it a setting I can do to bring it back?

  Is is possible that you and your daughter have different generation?  The youtube API supports more generation 2...

  have you updated your software?

  Identify your model of Apple TV - Apple Support

  http://www.MacRumors.com/2015/04/20/YouTube-older-Apple-TV-discontinued/

• Install new drive - restore basic questions

  Comments have a new internal drive installed on my MacBook Pro mid-2009 and after reading the relevant articles confirm a few basic things since this is my first time doing so wanted.

  Should I format the new disk using disk utility before using my last Time Machine backup to restore my files and Mavericks? If so, just start as normal and go to disk utility > format the drive > shut down > restart by pressing Option > choose restore in Time Machine? If it's just restart by pressing Option and choose restore from my latest backup from Time Machine?

  I am running Mavericks. Apple somehow automatically restore and update me to El Capitan?

  In addition to the Time Machine on my Time Capsule backups, I all supported up to two ext HD. Everything I need to do in preparation or at the time of the restoration?

  Should I format the new disk using disk utility before using my last Time Machine backup

  It would be a good idea to do so. You must start on the recovery Partition to reformat the drive. While there, you can restore from Time Machine.

• new cpu insalled / with questions

  Hello

  So I just upgraded my cpu with one I bought off e - bay, but when he started he was starting the resolution is messed up. Giant letters and in "Device Manager" > processors, he always saves my old processor. My Windows partition does not recognize my new CPU, I tried clicking on "Update my score" but I droped my previous 5.9 1.0. I decided to download an old version of my BIOS, but it did not turn. Don't have I skip a step or something?

  Hello

  Before the power would have been my choice to clear the CMOS memory.

• New arrival 11 Pro, question?

  This post has 2 parts, a question and a problem: (processor core i5 4 GB, 128 GB drive)

  First of all, the question is the place of sessions 11 pro high-dimmable to 8.1 of Windows Pro via the propack?

  Secondly, I had a problem where when the device goes to sleep, or when I push the power button when I'm done using or the screen will turn off by itself, it will start.  I have to press on and hold the power button until it turns off then turn it back on again.

  ctdreamin

  First of all, these really had nothing to do with blocking system when he falls asleep, since the tasks do not exist or were not activated. The issue has cleared up, perhaps when I installed the 8.1 victory pro pack. Do not install had nothing to do with compensation she no more, but whatever it is I'm glad, that he stopped. Overall, I really like the Tablet, there is that one thing that I find annoying, is the brightness setting. I wish that we had more control, the just thing dims without reason, then brightens upwards a few seconds later. I played with the brightness controls, but does not, just give me a light control on the task bar and I would put myself...

  Easy as pie, just disable him "enable adaptive brightness" in the display of the power Plan section. You can also find the keyboard brighten and darken the keys F11, F12 key.

• Instant ink / no new cartridge sent / Support questions

  Hello

  I just wanted to post a message to express my discontent around the Ink Instant subscription service. I am based in the UK and signed to instant ink.

  Last week I ran out of ink, and I had not sent a new cartridge. I emailed HP and received an automated response advising that anyone on the suggestions within 1 day. two days later I phoned HP that I had not received a response to my email (it is now 3 days and still no response by the way).

  The representative of HP connected my call and said I had to be my printer to go through certain steps. The call center is open 09:00 - 18:00 Monday - Friday, which no help for me as I work full time so there may not be to my printer to connect the call.

  I called back the next day with the serial number of the printer. They confirmed that the guarantee was still valid, but I don't see the relevance in what I was calling about the subscription to instant ink, not a printer warranty issue.

  Still, I learned that I needed to be in front of my printer. However after I said that I could not because of this due to working full time and their call center hours are limited, I was put through another Department. They load a new cartridge to be sent to me I expect every day now.

  I know that the instant the ink program is new to the United Kingdom however I was extremely disappointed that:

  (1) sent me a new cartridge before my race an existing

  (2) there was no acknowledgement of receipt of my e-mail asking a new cartridge

  (3) the steps I went through to record a call with your center of calls about the series printer when it was the program of the instant ink on what I called

  Now, I was without a printer for a week due to having no ink. I hope this feedback is taken into account, and I sincerely hope that I don't have to go through that pain once again when I need a next set of cartridges

  Hi, the details have been sent the instant team of ink. Could you please let us know when it's resolved?

  Thanks, Ciara