New podcast nowhere to be found
Hi friends!
I have a new podcast called alcohol and Phasers. We are on episode 4 and I can see the podcast when I search for it, but it is not found anywhere else in itunes. I searched through the thousands of ads in the N & N, what's hot, etc in each category, it is listed under (arts, comedy, TV and cinema). We also had a good number of comments/notes and subscribers since its launch, while I do not expect to be the head, I think, so I'd see our show SOMEWHERE under the N & N ads.
My concern is that perhaps I have not listed correctly in a new show or I'm not using keywords in the right way. I'm afraid that my great show will fall into the abyss, if I don't know where he is. Did anyone mind taking a look or weight? I would really appreciate it.
Thank you!
https://iTunes.Apple.com/us/podcast/booze-and-Phasers/id1117740350?MT=2
Research on the category in the iTunes Store is probably not throw up your podcast. There are thousands of podcasts out there, and it would be quite impossible to display on a single page of the entire list for any category. What you see are the podcasts "recommended", chosen by Apple as being special. Note that there is no way that you can influence the other choice to make your very special podcast (corruption will not work ☺).
Tags: iTunes
Similar Questions
-
Trying to submit a new podcast, I get the error "unable to analyze your diet." What does that mean?
Trying to submit a new podcast, I get the error "unable to analyze your diet." What does that mean?
There is nothing else with the error (I see references to problems with the exact lines of the RSS, but I don't get everything). RSS feed works fine in a different podcast player.
Here's the .xml file:
http://www.iTunes.com/DTDs/Podcast-1.0.DTD"version ="2.0"> Podcast of Mo http://psychicreform.com/mosports/
en - us ℗ & © 2016 MB Podcast This podcast addresses all kinds of sports, but especially of college sports with a focus on the United Kingdom and uofl's of baseball and basketball, Arizona Cardinals football and baseball for the St. Louis Cardinals. Did I mention Mr. Overbey do not use notes or have a computer to access the internet? MO Episode 6 http://psychicreform.com/mosports/160208-006-MoSports.MP3' length = "4540370" type = "audio/mpeg" / > http://psychicreform.com/mosports/160208-006-MoSports.MP3 Saturday, January 9, 2016 17:00:01 CEST MO Episode 5 http://psychicreform.com/mosports/160205-005-MoSports.MP3' length = "32525946" type = "audio/mpeg" / > http://psychicreform.com/mosports/160205-005-MoSports.MP3 Saturday, February 6, 2016 17:00:01 CEST MO Episode 4 http://psychicreform.com/mosports/160112-004-MoSports.MP3' length = "57652357" type = "audio/mpeg" / > http://psychicreform.com/mosports/160112-004-MoSports.MP3 Wednesday, January 13, 2016 17:00:01 CEST MO Episode 3 http://psychicreform.com/mosports/160104-003-MoSports.MP3' length = "46250012" type = "audio/mpeg" / > http://psychicreform.com/mosports/160104-003-MoSports.MP3 Sunday, January 10, 2016 17:00:01 CEST MO Episode 2 http://psychicreform.com/mosports/151230-002-MOSports.MP3' length = "62485146" type = "audio/mpeg" / > http://psychicreform.com/mosports/151230-002-MOSports.MP3 Sunday, January 10, 2016 17:00:01 CEST MO Episode 1 http://psychicreform.com/mosports/151225-001-MOSports.MP3' length = "35638537" type = "audio/mpeg" / > http://psychicreform.com/mosports/151225-001-MOSports.MP3 Wednesday, December 30, 2015 17:00:01 CEST Please always post the URL of your feed, not its content. I'm assuming that your workflow is the one mentioned in the tag "atom: link".
http://psychicreform.com/mosports/mosports.XML
Feed validators are complaining that this line contains a prefix of "independent". I think it's probably because in the second line, "rss.xlmns" it does not mention "atom", only "itunes" - the URL in this line indicates the feed reader RSS how to interpret the tags for this application. Without link for 'atom', the tag is meaningless to readers, and it is marked as an XML error, which is enough to cause the feed unreadable. There is no need to have this line (Atom is a very old RSS reader which I doubt anyone uses now) and you'd better remove that line altogether, either that or somehow insert the URL of the atom, which seems to be "xmlns:atom ="http://www.w3.org/2005/Atom"" so that the second line would read as follows: "
http://www.iTunes.com/DTDs/Podcast-1.0.DTD"xmlns:atom ="http://www.w3.org/2005/Atom"version ="2.0">" You will need to take one or the other or the feed will continue to be unreadable.
-
New podcast does not 'live' - stuck on 'Sample'
We have about 12 podcasts on our account. All of them work well and when we add a new podcast it takes 2 or 3 days before we get a link "on-line".
But, we have added a new podcast now almost 2 weeks and it has not progressed to 'live' it is stuck on 'new' with only a "Preview" link
There is no exclamation point, suggesting a problem, theres a few episodes in the stream with accessible audio files. The same code produces all our podcasts so that I'm not convinced its a problem with the generation.
Where should I go from here? How to solve problems and take the next steps?
Thank you
Christian
Christian,
I recommend you contact [email protected]. If your stream was invalid, you probably would have seen an error during submission. Be sure to check the stream to:
podba.se
Feedvalidator.org
As flows are probably valid as you have noted, it would be preferable to contact support.
-Fan
-
Add new targt - no device not found
Began development on a RIo SB 9605. Problems to set up the project. Add new target product 'no devices found '.
Problem solved. I installed LV2014 (which is actually LV2013 Feb - that is not confusing). If a new target became visiable - SB RIO embedded. I can now create the project with the sbRIO9605 target file, generate a FPGA file and run it. So I'm good.
-
CheckSUR Log - load useful files missing, nowhere to be found.
Hi all
Please check the log file CheckSUR below. He mentions four payload files that are missing, and I can't find these anywhere (there are more, but I could find others on)
other computers; I ran the system update tool several times). Please let know us where I should look for these four.
Thank you, Denis.
PS The system is Windows 7 Enterprise 64 bit on a Dell PC Optiplex 9010
========================================================
=================================
Preparation of control system was updated.
Binary version 6.1.7601.22471
Version of the package 26.0
2016-09-19 23:30Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) CSI Payload file missing 0 x 00000000 auditpol.exe.mui amd64_microsoft-windows-m... ditevtlog.resources_31bf3856ad364e35_6.1.7601.23452_he - il_9f2a4f1263240fd7
(f) CSI Payload file missing 0 x 00000000 lsasrv.dll.mui amd64_microsoft-windows - lsa.resources_31bf3856ad364e35_6.1.7601.23452_he - il_cbcc7f709fe30031
(f) CSI Payload file missing 0 x 00000000 amd64_microsoft-windows-c certcli.dll.mui... ityclient.resources_31bf3856ad364e35_6.1.7601.23452_he - il_a9e40209a91c623d
(f) CSI Payload file missing 0 x 00000000 certcli.dll.mui x86_microsoft-windows-c... ityclient.resources_31bf3856ad364e35_6.1.7601.23452_he - il_4dc56685f0bef107Summary:
Seconds executed: 910To avoid confusion & duplication of effort, please post any/all further follow-up in replies to your TechNet thread => https://social.technet.microsoft.com/Forums/windows/en-US/6a892abf-4d22-4610-889e-6c2788e8cc58/checksur-log-missing-payload-files-nowhere-to-be-found?forum=w7itproinstall#8ddf7192-b833-462a-a085-cc484bf21e0f
-
I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019... Can someone help me please
How to troubleshoot problems connecting to Windows Update or Microsoft Update https://support.microsoft.com/en-us/kb/818018
-
Not installed new HD, said now no found bootable disk?
My hard drive failed on my HP G62 notebook PC, model #G62-234DX. I went to Best Buy and bought a new HD today. I open old, deleted, removed the support, installed on new support and then plugged new on. At the start of the computer says:
"No device found - start Please insert the diskette and press any key".
So I inserted my reboot disk (also Best Buy, where I bought the computer) and you press a button any. The same message keeps popping up. What I am doing wrong?
Hello
You're welcome and good to hear it to load now
All the best,
DP - K
-
ThinkVantage SU 3 will suddenly show a new message: ctor.dll not found
Hello
during the last 2 times of my system updates, that a message has arrived, that "ctor.dll" rundll not found. It is a new issue (?)
It seems, ThinkVantage search paths of file named English only! ??
ctor.dll is on my system, and is the path in German
C:\Programme\Gemeinsame Dateien\Installshield\Professional\RunTime\10\00\Intel32\ctor.dll
What's not now?
Latest version of Win XP on T61 and all the latest updates are installed...
Concerning
Hans
The message was produced during the update of the audio features by ThinkVantage. This task did not run correctly!
(It seems that TV has an error uninstalling the old version due to use of wrong path (English) names to uninstall exe / dll...?)
Solution by myself:
1 uninstall the Audio features manually (via system > software > Soundmax > uninstall)
2 reboot
3 - install using TV...
now it works and no more messages were posted... :-))
Hans
-
I have a Windows Vista running on a Sony VIAO laptop and has been updated with level 3 to 4 GB of memory. During the memory test, I found that 2 GB of original module was bad and replace it with the new 2 GB module end back where I started with 3 GB. However, Windows starts only at a little past the rectangle with 3 points moving ("State Bar"?) and them it goes to black and the desktop never appears. I tried to roll back to the last working version of Windows settings, but always the same results.
What can I do now? Is there a way to check and fix disk errors? Is it possible to install Windows XP Pro or I have to go to Windows 7. I even has System Mechanic Pro running on this laptop and it did help some casued the problem. It's as if the disc is damaged for some reason any. Only with Vista felt this helpless.
It seems to me that the new memory you have installed is bad or incompatible with the system. First, remove all chips and reinstall them and then try to make sure that they are correct and secure again - don't just press them in place, effectively remove and the replacement and make sure they are in the right direction.
Boot from the Installation of Windows Vista genuine disc (or you can borrow from someone) or a recovery disc with recovery options included in this topic. If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD (perhaps made on another computer, or perhaps in SafeMode with network if it does not - that would be a good sign if it is true). You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD. Select recovery options and follow the instructions until you see the menu. Once there, select the Windows Memory Diagnostic tool and run it and see what it says. If it detects problems (and I suspect it might), you may need to replace the new chip memory.
I hope this helps. If this isn't the case, after return and we will try other options.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
(brand new) hard drive 0 not found (Latitude D600)
======================================================
I know this has been discussed a lot, but I have not found a solution.
My laptop is a Dell Latitude D600, BIOS Version: A16
My HARD drive died last week, he was making noises that I made backups.
Of course, one morning I turned it on and it says '... ". hard drive 0 not found... »
So I thought right we'll buy a new one, no big deal. In this case.
But to my horror, the brand-spanking-new HARD drive made me exactly the same thing!
Costs of the antistatic packaging, directly in the cradle, with tenderness.
"First hard drive 0 not found '.
No bootable devices - strike F1 to retry boot, F2 for Setup utility.
Also, the BIOS reads my "main hard drive: ' as 'None '.
I tried: -.
-Replace (re-attachment for cradle clamp, tighten, etc..)
-reset of the BIOS (pressing ALT - F)
-internal 'HDD' isolation in the "boot order" (BIOS)
-startup WinXP CD to format (says also that it cannot detect a HARD drive)
-stroked and tweaked every possible BIOS setting
-a ran the diagnostics (well Yes, tells me that it cannot find a HARD disk)
-check the temperature (not a problem at all)
I bought my D600 to opportunity without boot floppies or manuals, and private security has passed.
I'll try to take out the battery for a day to see if that will be "flash BIOS" but I can't help you as (to my knowledge) the motherboard settings remain stored with the help of a small battery attached to the actual motherboard that would be inside the envelope, so I think it's a misunderstanding in another post on the forum , but I'll try it in desperation anyway. Next step would be to open the envelope and checking the IDE and remove the battery from the motherboard for 5-10 minutes.
After that, my only option is to send to some local business PC repair. Ick.
Any help will be VERY appreciated! Thank you.
-
I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:
1 PC is powerful enough with i7 and 16 GB chip.
2. new SSD this week.
2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.
3 Ran install successfully and signed using my Microsoft Account.
4 tried Windows Store for Windows 8.1, but said I need updates.
4 Ran Windows Update in Control Panel.
5. Windows update found 127 updates and they failed with error code 80248007.
I don't understand how I can get these failures with a new facility.
Any help will be greatly appreciated. Thank you all in advance!
Hello
Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...
They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...
-
Podcast support, help notes and review, access different places podcast - all rating and comments really appreciated
I see the option ratings and reviews and could write a review, so I don't know why everyone has to be problems.
However I do not know how it works on the application of iOS Podcasts that I can't verify that.
-
Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.
Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.
I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.
First thing I did was a fast hard drive test and it happened.
I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.
Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?
I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?
Thanks Bill
Hello:
See if you make your own plain W8 x 64 installation media works for you...
Download the ISO W8...
https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1
Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive
http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool
If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.
-
BlackBerry Smartphones New app installed but not found
I just installed Windows Live Messenger through Application center onmy BB Storm. I went through complete the process, but after that, there is not Windows Live Messenger anywhere. Previously, I installed Google Talk, for a week or two, and this demand seemed fine. When I go to the list of applications under Options, it says that Windows Live Messenger is installed. Under the Application center, it is not saying longer not installed, but I can't. I chose same show everything that I thought that this icon may be hiding.
This who can I try to fix this?
Never mind, I found this... .He was under Instant Messaging. I looked everywhere and not under this folder because I thought that is not folder but Blaykberry the instant messaging application icon.
In any case, for everything I made the first connection to my PC via the Desktop Manager application and after I removed this topic something happened to the sounds and storm return failing however different sound sound are selected. Then after awhile it's settled and now everything works fine again. Weird device.
-
Adobe Premiere nowhere to be found
Cloud of Creative, the installed, I installed the trial version of Adobe Premiere but can not find anywhere on my computer, where is he?
You have a 64-bit operating system? There were a few problems that first was 'installed' on a 32-bit system, looks like it has been installed ok but nothing can be found. First to 64 bit to work.
Maybe you are looking for
-
Hello I'm sharing installation points on my external hard drive (in El Capitan Server) and he said: "Failed to save the access control list. Make sure that the access control lists are enabled on the volume. » There used to be a way to do it from th
-
Cannot install Windows XP Home on the Satellite C850D
I'm Allen I have a Toshiba laptop Satellite C850D - 10: but you can't install Windows XP to fold a stop code 0x0000007b.SATA drivers have made command and AHCI, but no function. Help, please.
-
Re: Satellite A300 15 days after 2 days not working anymore!
I bought it in Greece, and after 2 days stopped working!I live in Brazil, so I left my laptop to fix, but I have to wait for 2 months, because they do not have the parts that are damaged!What to expect from a company that in 2 days the laptop no long
-
Hello I'm new to machine vision and wish you can help me. I would like to read the number of bus of a regular bus image (fig.1). I used OCR training train characters (buses), but I noticed that each image was threshold to read the bus number correctl
-
When I try to install any programs, I receive the error message that the mia.lib was not found. What should I do to correct this?