New Question form

Similar Questions

• Question form

  Hello

  I'm using numbers on a Mac and have a question form.

  Basically, I trade the Forex market. A particular strategy, due to the volatility on the graph 4 hr and the range of prices around my entry level, I have 3 entry levels and 3 separate stops.

  In the column A is the pair, for example, it could be GBP/JPY or USD/JPY. Each pair has its own characteristics, volatility and spread, so the size of the stop and the position of the trades are different to each other.

  Before entering the trade I have enter the price of the trade in the B column, and then enter the size of the judgment in column H and after I pressed enter, all of the columns between the two levels of trade of 2nd/3rd and the position of 3 stop price are calculated. These price levels, that I use to Cross Ref orders waiting or create limit orders.

  The formula is the same throughout the rank, I know how to set that upward, that I don't know or even know if it's possible, set the numbers so that it identifies the currency pair are get calculated and so use the appropriate values already predetermined that is unique for each pair? Otherwise if I can't do it, I'll just have some separate tables for each currency pair.

  I hope that this is explained well, his bit of a hardening. Thanks for the help in advance.

  Graeme

  Hi Graeme,

  Are the values of each pair, or are they specific to each of the currencies and calculated from the values to apply to the pair?

  If they are predetermined for each pair, has a lookup table containing a possible list of currency pairs in the column, then each of the values predetermined in the following columns can be used here.

  The values could then be extracted using VLOOKUP, or a combination of MATCH and INDEX.

  If they are predetermined for each currency, replace "currency" for possible "par" and "currency" for 'currency pairs' in paragraph 2 above.

  A table of model listing currencies and the sample values would help in the composition of a formula to adapt to the situation. You can get general information about the functions listed above in the browser functions. Select a cell any on a table, type = to open the browser functions, then enter the function name in the search box to bring up a description (with examples) for each function.

  Kind regards

  Barry

• New Question / / video rotation for reading

  New Question / / I solved 2 problems, I have a remaining. I am in the photo gallery of widows and

  I play a video sent from my I phone. The image quality is excellent, the sound is great. My problem

  is that the video must be turned right to good veiwing. I have no problem turning always moroccoin

  Gallery of photos, but you can not turn the video clip. What can I do?

  Thanks in advance.

  Callbackhunter Maker can turn a video clip if the clip is compatible:

  Movie Maker - how to rotate a video taken from the Angle easily - XP - Vista
  http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

• new question. I asked a question which was incorrect.

  the new question is: when I go to a certain web site andrewchristian.com they have embedded videos that I can't open.  When I click on the embedded

  icon, a box appears that wants me to copy and open somewhere else.  This file is a player.vimeo svc iframe site.  I was able to ask questions to microsoft and can't seem to find the right answers.  Looks like he wants that you copy into a social network that I'm not a member of.
  Help, please.
  Ken

  Kenneth

  As I told you in your other thread, you have to communicate with them.  We have no idea of what they are doing and they do.

  If this isn't Yahoo, contact vimeo.  Both are beyond our control and the scope of this site.

• Can you do a vector shape to a path without having to define a new custom form?

  I want to do a vector shape to a path. Is there a way to circumvent the duty to define a new custom form? I just want to add quickly the vector shape in a new layer, but I don't need defined as it is going to be used just once.

  Of course, if you select the path to make it active, just do a color fill adjustment layer.

  There are other ways if this isn't what you want.

  In photoshop cs6/cc with the active path and one of the tools of form or of the selected pen tool, press the button of form

  in the options toolbar.

• New LiveCycle form design Question

  I'm a LIveCycle v8.2.1 help. We currently have several Word Perfect forms that are built out of macros. The user opens the Word Perfect form & a box will appear asking different questions, such as name, address, location, etc. once the issues are all the answers to these questions are dumped in some areas of the shape with the pre-written words.

  My question is, can I do the same with Adobe LiveCycle? I know I can insert menu drop-down boxes & stuff with LiveCycle but is the pop up boxes so that users can enter their name, for, of, etc. possible?

  Basically, I just want to be able to create something for the user to open a form named memo.pdf. As soon as they open it, it get a pop up box asking them their names, what will this memo, and the subject. As soon as they enter the last item (subject) and click Next or OK, all these information in unrolling boxes are filled to the memo in the areas of effect... is it possible?

  You can use an app.response (documenteed in Acrobat javascript API) questions from popup and return responses in variables.

  something like this:

  var response = app.response ("what is your name?")

  After that the user answers the question the answer is contained in the response variable. They can choose different options can be tested to ensure that they don't leave your question. See the documentation for the correct codes for each possible answer.

  Paul

• Question form and expiration extended drive

  Hello

  I have a question about drive extended forms and expiration.

  The following scenario will exist?

  Reader expansion license expiration Date: April 1, 2012

  The drive model extended: December 31, 2011 with the above license

  The user opens the form on June 1, 2012. Is the form player always extended at this stage?

  
  Notice that we don't not player - extend (as an activity in our process) every time the form is rendered. Instead, we drive - extend the model and place it as an asset in our ABI.

  Thank you

  Bernard

  It is a response from both sides, first to answer your question, and then to raise an issue of General License.

  To answer your direct question, the rights of extension drive will end when credentials expire (in your example, April 1, 2012). After this time, the user will receive a message that depends on the version of the player.

  • If it is the Reader 8 or before, they will receive a message whose form has changed and that rights are no longer available.
  • For reader 9 and above all, messages have been improved, so that it will tell you that your form has passed the expiration date and that the user needs to obtain a new form of the creator. It will then differentiate between production licences and assessment to tell you which side of things the original RE license fell on.  And then, he'll be saying that you can always view and print the file (it is still a complete in PDF format), but you will not be able to record or perform other duties compatible rightes.

  But the biggest problem is that you seem to not have license appropriate in place.  Production licences have long-term (good until 2021 or 2023) licenses. The fact that your license expires in 2012 says that you were using the evaluation or development of licenses and qualifications, which all tend to have time-outs from three months to two years. You can see the details of your license on the server of the user interface (a 'get info' do) or via Acrobat (Niall explained the technique in another thread - see October 24). And if you are one of them, get the ID number (the identification information will be identifies as P23 or another P with two figures) and I can decode for you.

  The question is independent of the question of if you drive - expand once or you drive to extend a process for each form.

• Unable to create the new network former TC

  Hello

  So I have the current generation of TC acting as a router as well as a HDD on my old to wide wireless broadband. I experienced some problems with connectivity recently (where my MacAir shows that I am connected to the internet, but no matter what site I try to access everything simply does not load and ends up with a progression of Ribbon on the address bar of Safari-turn off and turn on the power back constantly solves the problem), but this is not what I am asking today. Recently, I had the new optical fiber internet for my house and got a new modem and everything has been installed. Only one of the four ports in the modem seems to work, but at least it works. The D-link router that came with it works fine, but I want to use my TC as the router instead. However, whenever I connect the TC on the working port, I am unable to connect. Airport utility, the lights of TC in green but 'Internet' is yellow, i.e. does not work correctly. It should be a problem with the TC because the D-link router works on the same port and connection ethernet via a thunderbolt on the same port adapter works perfectly fine as well.

  Is this a problem with the old settings on my TC being incompatible with the new network? Please advise, thank you very much!

  There are at least 2 different issues at stake here and possibly 3.

  A question is that whenever you change the modem or the router that connects the TC, or your provider of Internet services, the TC must be reset back to settings by default, and then set it up again to work properly with the new product and the new service.

  You don't mention how old your 'old' Time Capsule can be, but 3 years is on the average life of the time Capsule, if anything more than 3 years will be suspicious where reliable operation.

  The third possible cause is that only a single port of your modem/router works when the four should work. If this is a real problem here, we can't say, but you have to wonder a little about the reliability of a product that doesn't seem to work properly

• Satellite question: form

  Hello Experts,

  I am facing a problem with the satellite tag: form. I use this tag in my template and on submit, it calls for a site entry that performs an operation (it sends e-mail.).

  The model I used the tag Satellite: form is cached.

  Question:

  For some, this form publishes is a success and after a few strokes, suddenly it displays error "401 Unauthorized".  Session is not valid. Please re-login. Bad request.

  After clearing the cache, again it works correctly.

  Please suggest some ideas to fix. Thank you.

  The hidden _authkey_ parameter should be added automatically in the , but you are right that the page should not be cached. If it gets cached with a single value for _authkey_ applications for the other sessions will all fail.

• If I sync dreamweaver with catalyst for business, it will copy through new Web Forms?

  Hello

  I created a duplicate my client on Business Catalyst website (site development) to work with the help of Dreamweaver. I also have a few new forms on the development site.

  
  When I synchronize the changes to the live site, dreamweaver will copy my new webforms everywhere on the site online, or I have to start over again?

  Thanks in advance.

  Hi Brendon,

  Dreamweaver doesn't create web forms (which were created on the staging site) for the backend of the site direct, you must manually create these Web forms and screw them onto the page on the site online.

  Kind regards
  Radi amin

• Question: Form processing markets - add program

  Hello

  Someone is already using the step 'Add program' with the option 'Use a drop-down list to select the program.'?

  

  I tried to use the drop-down list (below the lookup table), but no idea on how to put the real ID (given the program a program ID and the ID of the step).

  

  Any help would be appreciated.

  Thank you!

  ADI

  I'm probably going to answer my own question...

  Each step in the program generator has its own unique identifier regardless of the program, so we can use that to put contacts in a particular program to a form handler using lookup option.

  We can get the ID via the API or the source page.

• Time and expiration time timesheet question (form)

  Yes I know this question has been asked several times but I looked through dozens of examples and many shapes "Sample" in the forums are no longer available since Adobe has changed things around. I have attached the form. I need put in place where time is not given in negative numbers for example, if a person works from 21:00 to 07:00. It needs display 10 hours instead of-14 hours (as it currently is for me). I appreciate the help! There is not 'breaks' or 'dinner' etc in this. Just a calculation between time and time.

  Thank you!

  

  Dropbox - Sheet.pdf of personnel allocation

  In TimeDiff, after this line:

  fend var = Time2Num (sTimeFormat, sEnd);

  Add this:

  If (fend

• Disabling new direct form proportional scaling of widget

  The new widget scaling proportional live form that appears on the left and right axis are really annoying (especially when there is a keyboard shortcut to do just a function), is it possible to disable this feature just? I'm a fan of the rest of the features form directly.

  Thank you

  Chris

  N ° you have to expand the shape to change its behavior as usual now.

• New Question slide without the slide master background

  Is it possible to insert a new slide in question which does not rely on the background of the slide? I want to be able and to copy and paste another background of the slide on it. I use a CPTX file in Captivate 8.

  Edit the master slide, or duplicate and modify the copy. You must

  use a question slide master for each question, because a lot of objects

  and functionality is incorporated.

• New Question guys on name of relational logic changes

  Sorry for the 'New Guy' question. I try it the way I wanted it worked rather than how it does.
  
  Let's say I have an entity named 'current database' with an attribute named "name of current database. Everything that is plan English for the logic model. Now, when I generate the relational model I want the Table named 'CDCD_CURRENT_DB' and the column named "CURRENT_DB_NAME".
  
  I worked with a glossary and a few other features trying to get this to work. He does little but I do not completely understand and I think I'm missing out on a large part of the power of the product. I was forcing the nickname 'CARTER' (as it is called) and the "database" to "DB" in the abbreviation "preferred" entity.
  
  I work with v3.3.0.734
  
  Thanks for the help.

  Hi Sky13,

  It can be done with a glossary, but it seems to me that what you want is not native in the run-up to the glossary.
  It's good to get here the basics http://www.oracle.com/technetwork/developer-tools/datamodeler/datamodelernamingstandards-167685.pdf
  Example here might also be useful if you want to go with Glossary - Re: Data Modeler: Naming
  If you want to use the preferred abbreviation, it must be CDCD_CURRENT_DB.
  For me CDCD_ is just a prefix - you can handle it separately in the relational model - on all the model, subview and in both cases classification types can also be used to determine how the objects are prefixed.
  You don't want not common to be abbreviated so do not put it in the glossary, but you should check the incomplete "Modifiers" checkbox in the glossary.
  Entity property 'Short name' goes to the table during engineering abbreviation. There is a transformation script that precedes the columns in the table with the abbreviation of table if you need. And another may remove the prefix.
  You can set the name in the plural in the glossary and if the entity name is a single word then plural names will be used during translation.

  Philippe