New tickets created using default Siri on iPhone instead of iCloud

Similar Questions

• New-VM creates a false for WINXP (Buslogic instead of LSI Logic) SCSI controller

  Hello

  I m using VI Toolskit 1.5 to create a few VM´s

  the pretty run´s script, but using '-ID winXPProGuest "creates a virtual machine with surprised I m, 0 Buslogic SCSI controller EXPECTED that result should be LSI Logic

  CODE:

  new-vm-host $VMHost - name $VMName - diskmb $DiskSize - memorymb $Memory - Networkname $Networkname - data $Datastore store - ID winXPProGuest - runasync

  Some ideas?

  Greetings JB01

  You should be able to create it as a guest of Vista, which will give you an LSI controller. If you need you can come back later and change the ID invited with Set - VM - ID. This will not change the type of controller.

• How to reset the button incase they click New to create the same effect?

  OK guys,

  So im at a stop of triggers on the timeline, EX: sym.stop (1000);

  Then I'm animating a click on an element div/EX function:

  SYM.$("Rectangle2Copy23"). Animate({left:'3px',height:'77'});)

  How to reset the button incase they click New to create the same effect?

  Instead the object does nothing because it is already in position.

  I would go back to its original position and recreate the same effect.

  Problem is that the timeline stops... even if I go to another point in the timeline panel

  the last position assigned by the rest effect, I want to reset it even on the same point on the timeline...

  Thank you

  First of all, you need to upgrade your board animate to 2014.1.1 to open the membership re-shared, and

  then check this out:

  Dropbox - Archive_upgraded.rar

  Note: I added jquery explicitly for use. animate(), like the last Animate edge has no dependency on jQuery.

  HTH,

  Vivekuma

• Hard drives, created using powerCLI only appear not

  Hello

  I created a new virtual machine using the following and started code in the BIOS. There, I decided to boot from the CD and ISO related to the CD player is a windows PE ISO. In WinPE Startup, when I try and do a diskpart, run DISKPART on the command prompt and the running list player

  It says "there is no fixed disk to show.

  I'm doing something wrong here? Code below:

  1. function to toggle the startup in the BIOS screen

  filter set-VMBIOSSetup

  {

  (param

  $Disable,.

  $PassThru

  )

  If ($_-is http://VMware.VimAutomation.Types.VirtualMachine)

  {

  Trap {throw $_}

  $vmbo = new-Object VMware.Vim.VirtualMachineBootOptions

  $vmbo. EnterBIOSSetup = $true

  If ($Disable)

  {

  $vmbo. EnterBIOSSetup = $false

  }

  $vmcs = new-Object VMware.Vim.VirtualMachineConfigSpec

  $vmcs. BootOptions = $vmbo

  ($_ | Get - View). ReconfigVM ($vmcs)

  If ($PassThru)

  {

  Get - VM $_

  }

  }

  on the other

  {

  Write-Error "incorrect object type. Only virtual computer objects are allowed. »

  }

  }

  $index = 0

  1. Create virtual machines

  1.. $vmCount | %{

  $vm = New - VM - $desiredHost - name 'testVm' VMHost - Datastore $ds - MemoryMB 8000

  $vm | Game-VMBIOSSetup - PassThru

  0.1 | % {$vm |} {New-harddisk - Datastore $ds - CapacityKB (4 * 1 MB) - confirm: $false}

  $netName = ($vm |) Get - NetworkAdapter). NetworkName

  0.2 | % {$vm |} {New-NetworkAdapter - NetworkName $netName - confirm: $false}

  0.2 | %{

  $isoPath = "+ ' Installer /' + $myISOPath [$index ++]

  $vm | New-CDDrive-confirm: $false - IsoPath $isoPath - StartConnected: $true

  }

  Start-VM - $vm VM - confirm: $false

  $vm | Get-CDDrive. Game-CDDrive-connected: $true - confirm: $false

  $index = 0

  }

  Disconnect-VIServer-confirm: $false

  Yes, there was a similar thread about the controller type that was chosen.

  For details, see New-VM creates bad SCSI for WINXP (Buslogic instead of LSI Logic) controller .

  In this thread there is also a link to my script in set up oftype of SCSI controller.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to create a default profile for all users of a computer under Windows 7/Vista for Firefox versions greater than 8? I would that all new users on a computer to get the same values by default, homepage, bookmarks, etc...

  I found some help on older versions of Firefox, but I can't seem to find anything for the latest versions greater than 8. There must be a way to do this for imaging large scale.

  Have you created a defaults\profile in the folder of the program Firefox (C:\Program Files\Mozilla Firefox\)?

  All files in this folder will be moved into each newly created profile folder.

  To give the prefs a default, it is best to do this via a mozilla.cfg file.

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.
  
  Place a local file - settings.js in the defaults\pref folder where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

• New document dialog uses a custom preset instead of [default]

  When I create a new document, InDesign CC 2014 automatically chooses one of my presets custom instead of [Default] (see below). Then, I need to manually select [Default] for a standard letter-size page. Does anyone know why he would do this, or if there is a way to force them to use [Default] first? There is a small problem, but it starts to get boring.

  

  try to replace your preferences

• My iphone 6 s most is having hanged. They said he he's is not replaced. I was wondering how should I confirm that the phone I get is a brand new one not used one?

  My iphone 6 s most is having hanged. They said he he's is not replaced. I was wondering how should I confirm that the phone I get is a brand new one not used one?

  This will be an iPhone manufacturer refurbished in excellent condition 'as new '. You can not change anything on this subject because it's the usual Apple policy on replacement devices.

• How to create a default domain and deploy the app in jdeveloper using a script or code (not manually)

  Hello

  I installed Jdev using silent installation.

  Now I have some apps already created I want to create a default domain, and then to deploy apps in it through any script or ants?

  Can someone help me on this?

  Thank you and best regards,

  Vivek Pemawat

  Hi This worked for me I checked the log of the jdev, how he creates the domain and then using that I created the field

  I used the python script for deploying applications:

  Connect ('weblogic', 'welcome1 ','slc01fnw:7103 ')

  deploy (appName = ' Application13 ', path='/home/rasubra/jdeveloper/mywork/Application13/deploy/Application13_Project1_Application13.ear' target = 'DefaultServer')

  Exit()

  called using wlst.sh TestAppsDeploy.py

  Thanks for all the help!

• How to create a default profile for all users of Firefox 9.

  I run a computer lab and am looking for a way to create a default profile in Firefox 9 that allows new users. I want them to be able to launch Firefox for the first time and see my home page. I want to disable any control for default browsers, firstrun pages or all the other guests.

  The former for group policy .adm files did not work longer.

  See http://www.frontmotion.com/Firefox/howtodeploy.htm

  You can create a defaults\profile file in the Firefox program folder and place the files that it be used to create and initialize a new profile.

• How to create the default user interface is newly added to the columns in the table

  I added the new columns to the database table existed who got the default values for the user interface to the columns existed.

  How to create the default UI for the new columns.

  I couldn't see the newly added columns change the default UI (object browser-> database-> default UI - Edit-> Table).

  Using APEX 5.0.3

  Can you please help.

  Thank you.

  Find the option "Synchronize with database" under tasks on the interface's default user - Edit

• New user: Question on default color "black".

  I apologize for my English is too bad, I hope you understand what I'm saying and help me find the problem.

  I got a deal for print in indesign, and I used the default "black" color to cover an icon, when I exit the job of printing, the "Black" area became overprinting. I had to check the setting of the color 'Black' and it is correct (100% Black, no overprint... etc.)

  Finally, I created a new 100% black (all the setiing is the same as defacult "BlacK") and used it to cover the icon even once, the output document had not discovered any problems at the moment.

  I want to know what is happening to him? Is this normal? If I'm not again I have this overlay problem, should I create a new 'Black' every time?

  Top: using New 'Black '.

  Second: use default "black"(red circle is the object of the overprint)

  

  

  Yes, it is a normal behavior. The black swatch in InDesign overprinted by default to 100%.

  You have discovered the easiest way around it.

  Bob

• My site, created using Dreamweaver cs6 shows only partial images. He worked until a few days ago when I updated Java and Firefox.

  My site, created using Dreamweaver cs6 shows only partial images.
  He worked until a few days ago when I updated Java and Firefox.
  The URL is j - f - a.com.au

  The images are not entirely loading or do you have other problems?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  I noticed that some images show at the right end of the window and have set width: auto (right: 0px; width: auto) set the width according to the dimensions of the image (i.e. maintain proportions) and others fill the width full page.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Siri on iPhone SE

  Hello

  First of all, I would like to ask you if the iPhone takes care the Siri, when it is not connected to a power source.

  If it supports using the Siri, when the iPhone is not connected to a power source, I would like to report a problem with my iPhone SE. I know how it should work, but it doesn't.

  Thank you very much in order,

  Jakub

  Here is the quote from Apple:

  Enable or disable the "Hey Siri" and customize the functionality

  To ask questions without pressing the Home button, plug your electrical appliance and turn on ' Hey Siri. With iPhone iPhone 6s, 6s more, iPhone and iPad (9.7 inches) Pro SE you can use this feature without plugging power.

  1. Go to settings > general > Siri.
  2. Turn on "Hey Siri."
  3. In iOS 9 or later, follow the prompts on the screen to make your most recognizable voice for "Hey Siri." ^* This reduces the chances that other people accidentally activates Siri on your device.

  You can disable "Hey Siri" in settings > general > Siri. If you have an iPhone with iOS 9 or later, you can also temporarily disable "Hey Siri" by setting your device face down.

  ^* Your voice information is not tracked or stored outside your iOS device. You can remove this information from your device by disabling "Hey Siri."

• migration of events imovie to new Mac without using the Migration Wizard

  Hello

  I want to do the following:

  Migrate from iMovie events of an old MacBook Pro (10.6.8 Snow Leopard) created using iMovie ' 08

  TO

  (Yosemite 10.10.5) iMac with iMovie 10.1.1

  All events are stored on 3 external drives (Nothing on the internal drive of MBP). Disks have FireWire interfaces, I can't connect them directly to the iMac.

  The destination is another external drive, with Thunderbolt interface. I copied the serious events in 3 separate directories, but not tried opening them with iMovie. Wasn't sure if there was data stored elsewhere (in ~/Library for example) that might be needed; In addition, I didn't know if I could manually merge the 3 separate records events iMovie with the Finder, or need to do somehow with iMovie.

  I manually moved everything some time ago - I haven't used Wizard migration; I didn't have enough disk space attached to the iMac when I moved everything, so I carried on using iMovie on the old MBP.

  I googled and read several articles on the events to an external drive / to new Mac, but none of them totally covers my starting position and desired end result.

  Would appreciate any insight how to go on this issue, and how and where exactly iMovie keeps all the data you need.

  The articles are (among others):

  https://support.Apple.com/en-us/HT202853 "update of projects and events from previous versions of iMovie in iMovie (2014).

  http://help.Apple.com/iMovie/#mov3ac6d42c "copy or move a video in your library of events to an external hard drive.

  https://support.Apple.com/kb/PH2302 "iMovie 11: copy or move video from your library of events to an external hard drive.

  https://support.Apple.com/en-us/HT203049 "move your iMovie for Mac library (2014).

  If your iMovie ' 08 projects contain media from outside the record of events (for example, from iPhoto or iTunes) then we must first using iMovie ' 08 on your old computer to "consolidate" your support so that everything is copied in the events folder.  Details for the iMovie 11 version can be found at: http://help.apple.com/imovie/#mov3ac6c7c9

  I don't have the ' 08 version help files, but I think it will be the same - you can check with your old Mac.

  "Disks have FireWire interfaces, I can't connect them directly to the iMac.

  FireWire adapters Thunderbolt are available for about € 30, which would use these drives on your new Mac.

  In fact, you can copy the project files and events with the viewfinder of an old external drive to the root level of the new new external drive (which should be Apple - formatted), but it is probably best to do from in iMovie ' 08, as described in the help of Apple.   Do 'copy' and not 'move' - this way you always have a backup of the original on the old disks in case of problems.

  I would like to convert the project files and the events of each of the 3 discs one at a time, creating 3 libraries separate iMovie 10.1.1.  You can always rearrange these in iMovie 10 after you have everything updated and verified.  Some people have reported the update of blocking process at any given time, so update in small batches of events and projects is much better than trying to do everything at the same time.

  In fact I would try to first simply copy one (or a small group) project and its events associated with the new external with iMovie ' 08 HD then update to ensure that it will work - from iMovie ' 08 for iMovie 10.1.1 is a big jump.

  Good luck!

  Geoff.

• new apple tv, used the remote and now the air - pad sound not working not

  new apple tv, used remotely for a while before you get it linked to the box, now her i - pad (version 9.2) air does not

  Hi friend of the hills,

  Looks like there is a problem that prevents audio work as expected on your iPad Air and it took place after the use of the Remote with Apple TV app. It is perhaps because AirPlay is activated, try to turn it out, as shown here:

  Use AirPlay to stream content from your iPhone, iPad or iPod touch - Apple Support Wireless

  Disable the AirPlay

  1. On your iOS device, slide up from the bottom of your screen to open the Control Center.
  2. Tap AirPlay.
  3. Type on your device at the top of the mailing list.
     

  If the problem persists, try restarting your iPad as stated in the article below.

  Restart your iPhone, iPad or iPod touch - Apple Support

  So long.