Similar Questions

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• Getting 7 error with the HTTP POST vi method when deplyed ISO crio as executable... urgent!

  Hi all

  I have an application where I can access the net server point of LabVIEW via the HTTP protocol to send the data. My application works fine when I run it on XP, and also sometimes on cRIO. I'm writing and reading files to store and read data from the server.

  When I do my application executable and deployed on cRIO I am constantly 7 error that says "Error in the node library function to call at the POST vi LabVIEWHTTPCLIENT".

  After getting this error if I try to run the my new project the crio (not through exe) I keep getting the same error. This means once the executable file is deployed on the crio, I get the error in my project application which was working fine before you deploy the executable file.

  7 occurs very frequently. and I am unable to find the reason. I gave all the paths in the constant form located on crio and files accessible also when the application is run.

  Is someone can you please help me what this error 7?

  as a result, that it is bound to the HTTP POST vi method...

  How can it be fix?

  Its quite urgent...

  Thanks in advance.

  Solution is provided by the NOR... Vi POST method missing two files that need to be there in the startup of the CRIO.insted folder there is in the system folder. That's why when running the exe that the startup on crio application it gives error as the files are not there. The fix for this HTTP POST vi update isn't out yet EITHER.

• Get an error with the EventGateway in Mac OS x 10.8

  Two machines, both fresh installs ColdFusion.  Set up an Instance of gateway named cfflexgw.  Point to a CFC to work and the local cfg file.  When I send a simple message to the gateway, I get the following error:

  Cannot find the adapter Flex to destination ColdFusionGateway in the RMI registry on localhost:1099.

  MultiServer 9.0.2.  With the help of the cfusion instance basis and I do alter not all xml config files again.  This code worked on version 9.0.1 (and still works) in OSX 10.7.  I also tried a dismantled SWC and message.  You can provide any help is appreciated!  Remote access works well BTW, simply do not send message to CF via the ColdFusionGateway.

  Thank you

  NIC

  I was able to solve this problem.  I wrote a blog post, so I hope that someone else's time records.  I still have no idea why this setting needs to be changed, so maybe a CF engineer can explain it my future studies.

  http://blog.nictunney.com/2012/12/BlazeDS-error-solved.html

• Build errors with the basic MFC program

  I installed Visual Studio community 2015 and C++ tools.

  However, when I create an MFC single application documents and build (without code of my friends added), I get an error like this:

  va_start identifier not found in atlcore.h

  Can someone help me?

  Here are the errors I get:

  Gravity	Code	Description	Project	File	Line
  Error	C3861	'va_start': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atlcore.h	591
  Error	C3861	'va_end': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atlcore.h	604
  Error	C3861	'va_start': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	12V
  Error	C3861	'va_end': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	425
  Error	C3861	'va_start': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	438
  Error	C3861	'va_end': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	440
  Error	C3861	'va_start': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	451
  Error	C3861	'va_end': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	453
  Error	C3861	'va_start': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	464
  Error	C3861	'va_end': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	466
  Error	C3861	'va_start': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	569
  Error	C3861	'va_end': identifier not found	MFCApplication4	c:\Program files (x 86) \microsoft visual studio 14.0\vc\atlmfc\include\atltrace.h	571

  Please ask your question to:

  MSDN - MSDN forums - Microsoft

  Related development issues are better addressed there.

• LabVIEW USB-6366 sample 2 AI and encoder value triggered with X 1-Encoder (not with the sample clock) - need help, please

  Hello world

  After 10 years of LabVIEW experience I'm totally lost.

  It's my first project with DAQmx and I do not know how to handle.

  My configuration: Windows7. LabVIEW 2012 DevSuite; X Series USB-6366

  My goal: trigger value encoder and 2 inputs analog

  I would get a result for the value of the encoder and each of the two analog inputs for each change of the value of the encoder (not more! I do not want to sort a huge amount of data afterwards)

  I was able to configure it with the measurement and Automation Explorer, but have no idea how to do that in a LabVIEW configuration.

  Read all of the examples I could find the analog inputs and the encoder with SampleClock. This isn't what I'm looking for.

  I would be very happy if someone could guide me to my solution.

  I have attached the confiuration exported from the measurement and Automation Explorer.

  Thanks in advance, best regards,.

  Balze

  P.S.: Sorry I got COMPRESS the *.nce file, because NEITHER allows you to attach files *.nce

  You'll get there, but yes, the first exhibition to DAQmx is probably a little overwhelming.  A few other tips based on your screenshot (I'm on LV2010 & can't open the code).

  1. "allow buffer overwrites" is that a functional but description is not text.  It lies under the Read DAQmx property node and must be configured before starting the task.  Here is an excerpt:

  

  2. it is usually (but not always) an available timing system to be used for all HAVE channels in a task just by the material.  As a result, all channels to HAVE should be included in a single task.   You can do this easily in chaining your call 'DAQmx create Virtual Channel' twice the job output and input/output error.  Because the second call will receive a task refnum as input, it will configure the 2nd channel of AI to be part of the same task.

  (It is possible to specify just several channels in a single call, but separate calls gives you the ability to configure different setting on the scale or range of entry).

  3. the 'random', which IA task gave you the error is due to the lack of sequencing in your attempts to start tasks.  The question which is the fortunate success that happens to run first can (and does) vary from run to run.  By combining the two channels to HAVE in a single task, this problem will disappear, but you want to be sure that the tasks of the AI and the counter are started * before * any clock signals come to PFI8.

  4. "change detection" will be available for digital input assignments, not tasks of meter.  And it is also generally supported only for a digital port a-bit value.  Other ports then that support data acq clocked by the software on demand.  I guess one of these questions is the source of your error.

  On the boards of the M series that I used, change detection has been supported only on port 0 - I think that the same thing will be true for the X-series cards.  The following took place without error for me using a simulated X series device.  By selecting another port gave an error.

  

• Pop-up for a log - it is no longer present with the latest version. Help, please

  I have a singlesignon at a place of work. A small pop-up window opens when I go on the site, so I can connect. Was working fine until I installed the latest version of Firefox. This site in particular only works with Firefox as well. I contacted HER for the work place and they said that the new version of Firefox Mac did to several others in the workplace. Any chance you can send me the previous version of Firefox, so I can do my job? Thank you!

  In the same sense that cor - el post, could transmit you this work around to your COMPUTER:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste ntlm and make a pause so that the list is filtered

  (3) double-click the preference of network.negotiate - auth.allow - insecurity-ntlm-v1 from false to true

  From: https://support.mozilla.org/questions/1005595

• I get an error with the same identification number: 6398

  The event log shows:

  Event type: error
  Event source: Windows SharePoint Services 3
  Event category: Timer
  Event ID: 6398
  Date: 08/02/2007
  Time: 13:20
  User: n/a
  Computer: CPSC
  Description:
  The Execute method of the definition of work Microsoft.SharePoint.Search.Administration.SPSearchJobDefinition (ID 3a4cd737-d0c1-443b-be03-75a0f99160bb) threw an exception. More information is included below.

  Recovery of the class factory COM for component with CLSID {629DA12E-9AD5-4FEC-B886-42C5982C5109} failed due to the following error: 8007042d.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I looked for answers on this subject and I still don't know what to do. If anyone has an answer, I would be happy! It seems to bring a few mistakes more with it as: Event ID 41734, 3355, 7888.

  Hi disease,

  You can check the link below:

  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/thread/dc1db06b-AC78-4547-B28D-a0d1efab3b80/

• My incoming mail 'outlook' works very well; However, the outgoing never pass. I get an error with the State report. What gives?

  My "Outlook" or "Outlook Express" never seems to complete an outgoing message.  I get very well.  When I try to send, there is an error message.  What gives?

  Hi BrendaJones,

  1. What is the exact error message you get?

  I suggest you try the steps from the following link and see if that helps.

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514

• Backup file on my personal profile to an external hard drive impossible. I get an error saying "the directory is read-only, please select another.

  Was able to backup from the Admin profile.

  Manufactures States problem is a file or a parameter block transfer, maybe a problem of attrib file. How to find the problem to be fixed.

  Last backup in the month of August without problem.

  Not aware of any major changes to the computer, can have added AVG anti virius since the last update protection.

  Hi LovingMN,

  · What is the full error message that you receive?

  · What type of backup you make?

  · Are there data saved on the external hard drive?

  Change the attributes of the file. You can check the link for the steps below: how to set, view, change, or remove special permissions for files and folders in Windows XP: http://support.microsoft.com/kb/308419

  This can also be caused by the destination drive. If there is no data saved on the external hard drive, you can format the drive and then try to save and check the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I just bought the iPhone 6 on ebay but it's locked icloud and I can't configure the phone. I can't communicate with the user, I need help please

  Hello

  Please, I have recently purchased iPhone 6 on ebay and it is locked icloud. I can't set the phone and I couldn't get the previous user. How to unlock it?

  AGBO

  You can not unlock. Only the previous owner can.  Return the iPhone, if you can't have the former owner to unlock it for you.

  See: iCloud: locking Activation

• How to work with the "access restrictions"? Help, please

  Hello

  How can I restrict internet access at certain times for the same terminal (PC)?

  For example I want to allow the MAC address for Computer1 to access internet (each Tuesday and Friday) for 2 hours between 11:00 to 13:00 and the second hour is from 17:00 to 18:00

  Terminal: day: (access time)

  Computer1:Friday (allow access 11:00 - 13:00 and 05:00 - 18:00)

  Computer1unday (allow access 11:00 - 13:00 and 05:00 - 18:00)

  and to deny access to all the other times.

  How to do this?

  my router is wag54g2 Firmware Version 1.00.19

  There are two types of policies: you can't deny all internet or you can allow internet with few exceptions closely (filtering).

  You want to block internet completely, so you want to deny only policies. You don't want to do filtering. At the time where internet is not blocked, you want full internet. (?)

• I am trying to download CS4 on my new Mac computer.  I don't have the original disc.  Help please!

  I can't find my original disk to download CS4.  Is there another way I can download this?

  No problem. Have a good evening. I hope you can get this sorted out

  Gene

• list starting with the number 6? Help, please

  Is there anyway that I can make a list from one number other than 1? For example 6?

  Best info I could get to- http://www.timrivera.com/tests/ol-start.html

  This seems to work...
  

  
  
  6. It's a
  
  
  7. It's two
  
  
  8. It's three
  
  

• Getting year Error with RegExp class/interface in actionscript 2.0

  I get an error with the RegExp class to my flash document. I use an Action Script 2.0 to my document.

  Is the RegExp class is not supported in AS1/AS2?

  My code is as follows

  function validateEmailAddress(emailString:String):Boolean {}
  
  var myRegEx:RegExp = /(\w|[_.\-])+@((\w|-)+\.) + \w{2,4} +;
  var myResult:Object = myRegEx.exec (emailString);
  if(myResult == null) {}
  Returns false;
  }
  Returns true;
  
  }

  If (validateEmailAddress (email) == false)
  {
  
  contacterror = "error!" Please enter valid E-mail address ';
  
  }

  If RegExp not supported in ActionScript 2.0 and then how to validate the e-mail address to ActionScript 2.0?

  As far as I know and according to the doocumentation for help, the RegExp class was not until AS3 and it is not supported in AS2.  Try Google search using terms as "AS2 validate e-mail".   Here are some results...

  http://www.helmutgranda.com/2006/10/06/email-validation/
  http://AdobeFlash.WordPress.com/2008/02/06/email-validation/