Violent screen when the streaming videos G9-791

Similar Questions

• Hum/buffering sound every few seconds when the streaming videos online.

  I can't stream videos online (IE youtube, vimeo, etc.).  Every few seconds the sound will sound buffer. The photo is very good all the time. I have updated all drivers, tried to change the 16-bit sound, 440000Hz, update flash, silverlight etc. I also tried several browsers such as IE, firefox and chrome.

  I found a solution that is far from ideal, but if I disable the Realtek High Definition Audio, restart the computer and then reactivates the Realtek High Definition Audio, the sound buffer disappears. Unfortunately the its buffer returns the next time I start the computer.

  Does anyone have a more permanent solution than the deactivation of the sound system - reboot and then reactivating og the sound system?

  Cordially Oyvinols

  Hi @oyvinols

  You can reset the BIOS with this document by selecting the reload the default BIOS settings. Helping other people.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  I hope this helps.

  Thank you.

• Re: Buzzing/buffering sound every few seconds when the streaming videos online.

  I'm having the same problem. I followed your steps with the sound and even the glitching. Any other suggestions? Everything is updated, I use windows 8.1 it seems to be a little better on the Netflix App, but from time to time it will happen. Cannot watch Youtube or any other video. Tried to download the Youtube app to see if it is useful, and it was worse. Thank you!

  Hi @TobieJThiel ,

  Thank you for visiting the Forums HP's Support and welcome. I uninstall the current browser and download a new one for Windows 8.1. You can do this here.

  I would check here to see if there is Chipset driver updates that are needed as well as the BIOS update.

  I hope this helps.

  Thank you.

• When the Streaming of videos they pause every few seconds

  When the streaming videos that they play for a second then stop.  I don't know how to fix this.  I have Toshiba Satellite laptop, it is new and has a lot of disk space

  Hi RaeMyers,

  Welcome to the Microsoft Vista answers Forum!

  May I ask how you are actually streaming videos, it is using Internet explorer or Windows Media Player?

  Have you been able to stream the videos before without getting any error messages?

  Can I know the version of Internet Explorer on your computer? Can I also know the speed of the internet connection?

  Additional information:

  What can I do about video problems, such as green or pink lines that appear in the video, flickering or choppy video, the player is not responding when playing video, and so on?

  http://windowshelp.Microsoft.com/Windows/en-us/help/3519fc03-7f06-476F-A553-dcb5d4284e191033.mspx#etc

   

  The problems with playing videos in Windows Media Center

  http://windowshelp.Microsoft.com/Windows/en-us/help/70e00426-CCC3-4045-8488-8bd9a3662b5f1033.mspx

  Let me know if this information was helpful.

  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.

• Screen do not maximize mode full-screen when the taskbar is set to hide

  original title: Gap Auto-Hide

  I put my tool bar to auto hide. Normally, a zoomed window will extend to the bottom of the screen when the task bar is hidden. However, whenever I restart Windows, any window that is maximized will only go down insofar as space of the taskbar visible again, even when it is hidden. Turning auto-hide and the new set, but only until that next time that I reboot. Is there a way to fix it permanently? I use XP Pro.

  The problem I have is happening with any program that I open, not only IE and windows, then I would say it's more a problem of Windows.

  I don't think that was said in the original post.

  Check you the Technet Forum - they are the best service.

  http://social.technet.Microsoft.com/forums/en-us/itprovistadesktopui/thread/4aa71ed5-3500-4d11-A461-7d80c0847f91/

• How to avoid the minimizin of the screen when the user down ups slide

  How to avoid the minimizin of the screen when the user ups the down slide.

  Hello

  I guess that not possible because this is a feature of the system. Be able to substitute the blow to the gesture of bottom up would mean for combat when a user can switch to another application. It is not something that an application must be able to do it at all.

• Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok

  

  Try to edit > Preferences > Performance and uncheck "use graphics processor.

• How to block all the videos and ads on all the site as how it is when it shows the gray screen when the flash player needs to be updated

  Hi there please help me. I didn't have this problem until two days ago when the browser updated itself. I have the youtube video downloader add on and always use it. I'm on a data plan and it used to block videos and add ads which I like, but now is not because of the update, I came back to the old version, but it did not help and I downloaded the flash but block it does not work. It makes the slow loading of pages and uses a large amount of data that I tried many things like all the plugins of switching to add it on the menu to activate ever and it doesn't quite work. Before it used to show the gray screen, where it says "the flash player is out of date" on videos and commercials, but he does not do this because of the update so please help me to do it again.

  I solved. On the firefox support page they will give you information about the HTML5 player and they say there that firefox uses it only 38 version before so I'm 36 version and it worked in blocking it as before.

  So its all sort and if everyone wants to do the same thing go to https://ftp.mozilla.org/pub/firefox/releases/ and all previous versions will be there.

• Get the Green Screen when I play videos on my HP Pavilion 23 Windows 8

  Hello

  during playback of videos on my HP Pavilion 23 running windows 8 all of a sudden the video screen goes green and the only way to get a video to play again is to restart the computer. It's a new computer and it has happened as we got it. all updates are set to automatic so that we do not understand what is happening! It makes us crazy! lol any help would be so appreciated!

  Thank you!

  Hello

  Try a new installation of the plugin flash/ActiveX as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  After this has completed, restart the computer.

  When windows has reloaded, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.

  When the installation is complete, restart the computer.

  ***************************************************************************

  If the above is not correct the problem, try the following.

  First of all, download and run the uninstall program of Shockwave on the link below.

  http://fpdownload.Macromedia.com/Get/Shockwave/Uninstall/Win/sw_uninstaller.exe

  After this has completed, restart the computer.

  When windows has completely recharged, download and install the latest version of Shockwave on the following link.

  http://get.Adobe.com/Shockwave/

  Once again, after the installation, restart the computer.

  Kind regards

  DP - K

• Sound, but no video when the stream of a file quicktime by shock wave

  When I listen to a quicktime movie into the html file hosted on localhost using the Apache Server, I hear, but no video. I saved the film quicktime as part of my casting, linked to http://localhost/~username/mymovie.mov

  When I play the movie quicktime itself in my browser, or in a projector or just on a Director, the video and audio play simultaneously. But in the browser after you convert the film to dir to html and dcr file and by hosting files dcr and html on the server, when I open the html file in my browser, only the sound pieces. Anyone have similar problems? Any help would be appreciated!

  Hi guys,.

  Here are a few quick notes on how to handle shockwave videos with my projects.

  I tend to find that video in .swf format work better under all browsers using shockwave

  easiest way:

  You can make one lump in importing a .swf video directly in your casting. (without link)

  the problem with this is that it tends to create a large dcr file for your users to download

  "preloadnetthing" way:

  Download your videos on a site url - something like www.mywebsite.com/the_programs_title/dsmedia/videos/video1.swf

  (I never use capital letters or spaces)

  file - import - internet-

  This will add the file to the list add

  media value: link to the external file (do not use block import)

  Now press import

  When this Director will try to connect to your url - and downloadable the linked file test

  If it works you should now see a new Member related video casting added to your casting

  If it fails (which mine tend to make half the time?) - try it once again until it works.

  Here I normally find property of the related videos Inspector - and change its settings - I disables loop - and of course be sure preload is not defined.

  Now comes the part of code

  To get your videos to play properly, you will need to preload them in memory, before playing them.

  (although it is possible to videos - I have never been able to get it works well - there is a whole bunch of code lingo to treat streaming videos)

  a script for a video preload swf frame *.

  on beginSprite

  floatPrecision = 2

  tellStreamStatus (TRUE)

  global gVideosName

  the value TEMP "http://www.mywebsite.com/my_program/dswmedia/videos/" & gVideosName & ".swf".

  global mynetID

  Set mynetID = preloadNetThing (TEMP)

  Set the text of the cast of "preload_results" to "0%".

  end beginSprite

  on exitFrame

  floatPrecision = 2

  global mynetID

  pStatList = getStreamStatus (mynetID)

  If (pStatList.bytesSoFar > 0) then

  pPercentDone = (pStatList.bytesSoFar * 100) / pStatList.bytesTotal

  If pPercentDone > 99 then go THEN

  end if

  Set the cast text 'preload_results' ((la chaîne de pPercentDone) & '%"))

  go to loop

  end exitFrame

  a script in frame for playback of a swf video *.

  on beginSprite

  -I create a blank "placeholder" cast member (a black filled rectangle) the same size as my video, my staging - in sprite 1

  Set the visible of sprite 1

  the puppet of sprite 1 set to TRUE

  Global gVideosName - REM the name of my bound member video casting

  the value of the castNum of the sprite 1 cast gVideoName

  updateStage

  Sprite (1). Play()

  updateStage

  end beginSprite

  on mouseDown

  Sprite (1). Stop () - This stops playback of SWF movie!

  end mouseDown

  on keyDown

  Sprite (1). Stop () - This stops playback of SWF movie!

  end keyDown

  on exitFrame

  If .playing sprite (1) = false then

  Set to false to the puppet of the sprite 1

  go to "somewhere" - REM somewhere, you want to go after finishing the video.

  abandon.

  end if

  go to loop

  end exitFrame

• Disable mode full-screen when the window is moved at the top of the screen?

  Is there a way to disable the feature by which a window is maximized size full screen when you drag to the top of the screen?

  I guess some people, it is useful to have a full screen for their programs, namely graphics applications. But when I fix my screen, I want to place the upper part of the program directly on the top of my screen. It's something that I can't do now - without activating the real behavior of full-screen.

  Help!

  ROXY

  I found the following in Windows Help and Support re disabling Snap:

  How can I turn Snap on or off?

  How can I turn Snap on or off?

  Snap is turned on by default, but you can disable it if you want to move windows around the same way you did in previous versions of Windows.

   Go to the Windows site to see the video. (01:19)

  To enable or disable the Snap

  1. Click to open Accessibility.

  2. Under explore all parameters, click on make the mouse easier to use.

  3. According to make it easier to manage windows, do one of the following:

     • To turn off the snap, select prevent it windows from being automatically arranged when moved to the edge of the screen check box.

     • To turn on the Snap, clear the prevent windows from being automatically arranged when moved to the edge of the screen check box.

  4. Click OK.

• Windows reduced on dual #2 keep going back to the main screen when the system is locked

  I have two monitors and just got a new system with Windows 8 is installed.  I have a monitor set up as Monitor 2 (just as I did before windows 8) so that nobody walks by can see it... I have confidential information open on that screen quite often - otherwise, it is reduced.  My main screen is set up for the bulk of the work that I do.

  However, whenever my system is locked or falls asleep, the apps/information, I put up on the screen 2, flies back to the main screen when I unlock the system.  I never had this problem before.  I tried to maximize the apps/info to fill the screen, but it does not work: it continues to move... it means that whenever I have unlock my system, confidential information appears on the screen which can be seen by anyone who was travelling.

  How can I stop this from happening?

  Hi Kelleybennett,

  Thanks for posting the request in Microsoft Community Forums.

  It seems that even if the computer is configured in the standby mode, the second monitor stops and windows are going to another. This could be a problem with the video card drivers or pilots of the monitor. Video drivers could be arrested to answer when the computer is set to sleep.

  You can try to uninstall and reinstall the drivers for the monitor and video card drivers and check.

  a. press the Windows key + R

  b. type devmgmt.msc and press ENTER to launch the Device Manager

  c. in the search for Device Manager for the device, click with the right button on the monitor drivers and select the Uninstalloption.

  d. also uninstall video card drivers

  e. restart the computer and check.

  See also:

  Download and install the drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Hope this information helps. Response with status so that we can help you.

• Pink/green line on the edge of the screen when the crossfade to and from black transitions

  I've seen this posted as a known bug in first, but I have not found a decent solution for it.  Here's a screen Cap what it looks like:

  

  Note the pink verticle line on the right side of the frame. It happens when I am exporting out of the timeline in a different format - it doesn't look like this in the timeline panel. I did some tests and it seems that do that when:

  (A) it is fading to black or black - cross-dissolution of one video to another do not do

  and

  (B) the output video is 16:9 wide screen

  This does not happen when I create a HD video and it happens when it's a video SD card in aspects "D1/DV NTSC (0.9091).

  Thoughts?

  I want to highlight a number of things here:

  • From my experience, I don't have a card CUDA, so I guess I use the Mercury playback engine. However, I always get a pink line using the Adobe Media Encoder. If I just export directly from first, I don't understand.
  • All my patterns are exported to 1280 x 720 or 856 x 480, which are divisible by 4.

  Given these two points, I tend to say that the problem is with SOUL and must be resolved by Adobe. Use an opacity instead of transitions is all just silly - we used transitions in digital bouquets of editing for years, so it shouldn't cause pink pixels.

• Of crashes/blue Equium A60 laptop screen when the LAN cable is in?

  Hi all
  I have a laptop Toshiba Equium A60 which now extends for less than a year.
  I am running WinXp Sp2

  Yesterday, my laptop started to plant flashing a blue screen (not the time to see what he says that the computer reboots too quickly).

  I found that only apparently failed when the network cable is connected for example if I start the laptop, it will be put in service as usual, but when it starts to communicate with the network/router (I see glancing at blue screens in the lower Task Bar to the right), it crashes. I tried another port on the router but no luck.

  Is my network card: Realtek RTL8139/810 x Family Fast Ethernet NIC

  It works well in Safe mode and doesn't crash.

  I updated the driver but and it's always the same.

  I then decided to restore my laptop to factory/day via the Toshiba Recovery DVD.

  When it worked fine all day restored (had internet access via the network) until I clicked on: set up a home network or small business in the control panel. He crashed again in the same way. Now it will crash repeatedly like above.

  This could be a problem with my cable?
  Help, please... Any ideas?

  Thank you for the charges,
  Shay

  Hello

  If the network connection works fine, it is not necessary to set it up again. I guess there are conflicts and the unit freezes. In my opinion there is no problem with the hardware or with your cable with the network settings.