New user: stop translates zeros unwanted data collection.

Similar Questions

• New user created does not all data in reports

  Hi all
  
  I use Hyperion Planning 11.1.2.1. I have a problem when I created a new user in the system through shared Services. Reports are reports and analysis reports.
  
  I have reproduced a current user of the system and applied the same groups and provisions. However, the new user may not display all the data in the reports. However, the current user is able to do. I'm quite literally baffled.
  
  The existing user has been given to the provision of "Planner". In addition, the existing user has dimension security applied as well. It works very well with the existing user, as when I connect as long as existing user, the data is available only for groups and dimensions that it has been assigned to. But when I apply the same groups and provisions to the newly created user, I get absolutely no data, although I can see the report.
  
  But if I ask the Essbase Cluster: provision of administrator to the new user, all data is viewable in the reports, regardless of the dimension of security.
  
  I'd appreciate emergency assistance to get this issue resolved.
  
  Concerning

  Go to EAS, then continue with your application/db and view filters, I guess that for previous users filters?
  If so your new user has filters, if maybe you need to refresh the security filter, of planning.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Update the column values with the new user who has changed the data in the current line

  I have a table, the following structure.
  
  CREATE TABLE FILTERCALENDAR1
  (DATE OF THE "C_DATE',
  NUMBER (1,0) 'DAY_OF_WEEK ',.
  NUMBER (1.0) "WEEK_WINDOW."
  NUMBER (1.0) "MONTH_WINDOW."
  NUMBER (1.0) "YEAR_WINDOW."
  NUMBER (1.0) "DATE_YEAR_WINDOW."
  NUMBER (1.0) "ONCE_WINDOW."
  VARCHAR2 (25 BYTE) "USERNAME."
  "LASTUPDATED" DATE
  );
  
  Problem:
  If a user changes the value of one of the columns I want to write his name to user and sysdate in the 'USERNAME' and LASTUPDATED' columns.
  
  * Tried: *.
  I tried an update trigger for this problem, but I get an error table mutation.
  
  The one you suggest how can I achieve this.
  
  Concerning

  Use BEFORE the UPDATE trigger

  CREATE OR REPLACE TRIGGER myTrigger
  before UPDATE ON FILTERCALENDAR1 FOR EACH ROW
  BEGIN
  :new.USERNAME := user;
  :new.LASTUPDATED := sysdate;
  END;
  

• How can I create a chart that creates new series each year when the data are not collected on a daily basis?

  I collect numbers "occasionally" of my solar system and to create a standardized chart that shows that the generation on an annual basis, so I can compare fall in the fall of each year, etc..

  Because the information is not strictly 'daily' (just whenever I get to it), I don't know how it normalize for several years.

  For example, if I had

  Date - Kw/day

  15/01/10 - 14

  03/04/10 - 18

  18/04/10 - 17

  01/06/10 - 19

  21/09/10 - 15

  03/12/10 - 9

  07/02/11 - 13

  02/05/11 - 16

  17/08/11 - 18

  01/11/11 - 12

  02/11/11 - 12

  05/01/12 - 9

  04/06/12 - 12

  and so on.

  What I'd like to see is a line graph for each year from January to December with these datapoints on it. I have much more "incremental data" that I presented above, but it's on "random dates" during the last 8 years, and I'm just trying to see how each year compared to other years.

  To be at the front, I tried to understand how this in Excel as well, but he could not understand where the other.

  DRM for any tips/tricks/tips!

  Steve

  This might work for you...

  I placed your data in a table named "Data."

  Create a second (in this example, titled 'Table 1')

  

  In the table 'Table 1' months are in the first column and the first row (which is a header row) contains the years - add columns to add new year:

  B2 = if (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  It's abbreviation dethrone select cell B2 and type (or copy and paste it here) the formula:

  = IF (SUMIFS (data: $B, data: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" "") > 0, SUMIFS (data: $B, given: $A, "> =" & (B$ 1, $A2, 1), DATE data: $A, "<" & EOMONTH(A1,0) will GET (DATE B$ 1, $A2, 1, 0) "" ""), "")

  Select copy of cell B2

  Select the cells B2 at the end of F13, dough

  now select cells A2 through F13 and add a graphic (the XY scatter diagram)

  Add new year add one (or more) new columns for "table 1", then add the year to the top:

  

  Now alone, click the chart to activate the chart.  then click on the button 'change data references '.

  now, drag the data reference control handle to the right to add the new year to the table:

  

  You can add several years to the time, so you don't have to it very often

• lack of system restore - the animated icon appears to indicate the data collection, but then it stops

  When I try the system restore, I am able to choose a restore date. I then accept the details and press next to accept. The animated icon appears to indicate the data collection, but it then stops. Therefore, the system is not shut down and restart (which I think it is supposed to do). If you try to select another date that is the same thing. any ideas? I think that I was previously exposed to a system whose consequences restore virus had to hide all my files. I'm still not programe files on the start menu.

  Hello

  Method 1: I suggest you to run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: you can lose data if the parser detects a corrupted data file.

  Method 2: Run the SFC scan and check if system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: You can also try restoring the system to the Windows recovery environment (WinRE):

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• VMware vCenter Server service stops or restarts at the start of data collection

  VMware vCenter Server service stops or restarts at the start of data collection

  I am using vCenter Server 5.0

  Whenever I have begin to collect data, vcenter service stops or restarts, if I stop data collection and to disable the agent, vcenter service again and works well.

  Please any help!

  Thanks in advance

  It is a known issue, relating to the collection of historical data being enabled (nonzero) in the properties of the VMWare Agent on the Agent status screen.

  Change to 0 to disable/re-enable the agent and it should fix the problem.

  Please open a ticket of level 1 with telephone support if you need more help.

• Move the user off the system disk folders? Envy of all the data on E, so need to move directories user E. not individually, but in the world. If all new users, I create will have their user and docs folder on E.

  Got a new laptop with win 7 home premium pre-installed. Using the language of win 7... I have decreased the volume of HDD to 55 GB.  Made new simple volumes. I want all the data personal on E, so need to move user directories to E. No individually change the location tab on dozens of files, but in the world. If all new users, I create will have their user and docs folder on E from the gitgo.

  Under XP, I could just change the 'My Documents' link on each desktop, go to the e. * instead of c *. *, but with win7?

  As a Windows Home Server and most wise OS facilities, the system drive is isolated and a drive of 2 or 3 for everything else.  Get a problem? Just restore the system drive.

  You need the answer?

  Thank you
  Tom
  PS Microsoft: This backup/do imaging software, why don't we name the image so many can all be stored on easily in one place without having to go and rename it or move them elsewhere?

  Hello TomZork,

  Thanks for posting on the Microsoft answers Forum.

  In another forum, I found the instructions to move folders of users to another drive.
  You can follow the post here. This is attributed to Jimmie R. Houts.

  Article:
  You can move the entire folder C:\Users to another drive quite easily once windows is installed:

  1. Boot from the installation media and access the command prompt (I think you need to click on fix everything first)
  2. Use Robocopy to copy C:\Users to D:\Users: robocopy c:\Users d:\Users /mir /xj
     a. /mir says robocopy to mirror directories, this will copy all files and permissions
     b. /xj is very important, it means robocopy does not follow the points of junction. If you forget this, you will have a lot of trouble.
  3. Make sure that the files copied successfully
  4. Delete c:\Users
  5. Create the junction pointing d:\Users: mklink /d c:\Users d:\Users

  That's all. I used this process for Vista RTM with no problems.

  Here's an article that explains as well. Just use robocopy instead of xcopy as it does in the article in order to avoid possible ntfs permissions problems.

  Update: because I discovered the hard way, I thought I would mention also that if you plan on switching "Program Data", or "Program Files" with this method, you will be disappointed to know that everything works as expected, but the windows updates will install is no longer. I don't know if this problem has been fixed in Win 7.

  With the foregoing, it is not a Microsoft forum or Web site so you will have to use at your own risk. I also recommend to do a system restore point before making any changes in directories that you can then go back to a previous state.

  Please reply back and let us know if these suggestions help you to solve your problem, then to benefit others.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I migrate data UAC 8 widows for a new user account.

  Hi thanks for your help.

  I created a new user account in my pc Windows 8 and I want to migrate my data, files and images for the new user account.  Anyone know how to do this in Windows 8?

  Thank you

  Hi Wendol,

  Thank you for choosing Windows 8 and we are happy to help you.

  I understand from the description of the issue you want to transfer data from one account to another account in Windows 8.

  I suggest you to move your public folder data, so that all users on the computer will be able to access. Go through the article to learn more about public folders and how to enable this feature.

  Public folders: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/public-folders-FAQ

  It will be useful. For other questions related Windows feel free to get back to us. We will be happy to help you.

• How my new users access to the data in the database?

  Hello

  I created a database with new users who will need to access the database, but as soon as I connect to one of the new users can't access tables or any of the data that I had inserted previously.

  Any help would be greatly apprciated!

  Thank you

  Rory

  (Running Oracle 11 g)

  As connect you to the database by default, you can only access your objects or object that you access directly by prefixing its owner. In your case, not only you must give the user but also needs prefix synonym/owner access rights to access these objects. for example

  user that has (you) have following things:

  EMP (grant select on emp to UserB ;)

  Dept (grant select on dept to UserB ;)

  User B

  Select * from UserA.emp;

  Select * from UserA.dept;

• I have error 213:10 in Adobe Master Collection CS5 update to a new user on my system.

  I use adobe master collection CS5 on windows XP Professional, and I add a new user on my system.

  Now it's show error 213:10 (this is a problem with the license of the product). I tried so many times, but is not to solve.

  How to solve this error?

  You need to reinstall the software from scratch.

  Mylenium

• MF hangs at startup, but works in safe mode and a few minutes after I made a new user, can anyone help?

  After a repair for a few hours, I don't always find a good solution. Actually, I've learned that if I create a user profile, with this command in windows Run: "C:\Program Files\Mozilla Firefox\firefox.exe" - p, I can open the profile user manually and create/delete menu a user new/UN-new, and the creation and use of a new, it works fine. Open the browser, in any case, in which she translates into the same problem as before for a couple of times. I made a list and compared the old files for files users a whole new and found some differences. Indeed, take

  Compatibility and .ini file extensions differ by 3 KB, with a new user being 1 and the former user 4.
  The RDF store Local file differs from 2 to a new user, 4 for a former user.
  The RDF file Mime Types differs from 3 for a new user to 4 for a former user.
  Plugin Reg(istry?) .dat differs from 17 news for 20 old ones.
  Search.JSON differs from 13 to 16 old news.
  Search Metadata.json differs from 1 new on 4 old.
  Classifier URL 3 key. txt differs from 1 new on 4 old.
  Web App Store.sqlite differs from 96 to 128 old news.
  (All units are KB)
  Because a few articles about the problem are "more maintained" and the solutions work only temporarily, I came here hoping to solve this little problem. Thanks and good luck in advance.
  -Av
  Notes; the first crash, what ID for the new user that crashed, the last is for a former user.

  If this problem just started in the last few days, I can guess that you are using google.com (or a localized variant) for your home page.

  If this is the case, the Olymoic "doodle" animation is causing crash at startup. Mozilla developers are aware of this issue and are looking into it.

  For now, change your home page, or use a blank page when opening Firefox and then press the Home button to load you the home page. A real difficulty doesn't could not be 'pushed' until after the Olympic Games are finished and Google goes back to a static doodle.

• WJA - has no alerts - inaccuracies of data collection

  I've been running Web Jetadmin v10.2.7491B on a Server 2003 during approximately 3 years. There are 120 managed printers consisting of 9 different models.

  Question #1

  Initially, I got alerts configured on all printers that would send an email when a consumable fell below 3%. It worked very relibly for the first year. Over time, a growing number of printers stopped to send reports, until finally only a handful sent alerts. I never found the cause of this problem.

  Question #2

  Alerts being broken, I set up a collection of data daily for all printers and a csv morning emailed report. I then sort data in percentage of consumable remaining and replace those 1% or less. Recently, reports have stopped 3 models on 9 specific consumables percentages in daily reports. This problem seems to be with an update of the firmware that I pushed to all printers. The console does HOSTS shows specific information for individual printers when they are selected.

  Steps taken to solve #2

  Printers have been removed from all groups from the Collection of data from reports and then added. This has not solved the problem. Printers were originally added individually to a data collection, but I've set up a group policy that automatically adds a printer to the collection of data. 6 models of printers are still accurate percentages, but not the models 4345, 4730 and 5035.

  Is there a file database that I can delete that forces a rebuild of the collection of data for all printers? Is it possible that the new firmware for the 3 models listed has a bug which prevents update data?

  

  This forum focuses on the level of consumer products.  For that matter, you can get best results displaying in the company, print, network and Web Jetadmin forum here storage servers.

• Add a new user has produced two news users.

  I have a problem with Windows Explorer to crash. On one of the posts here, it was mentioned to set up a new user and see if the old user data are the issue. Well, I did and when I did set up the new user, I created, but also an additional user with the same name with a dot + my computer name. This username is not launched signature or it will appear in the screen of the user of the control panel. Just remove the additional user name files in Windows Explorer?

  Hello

  1. is the problem with Windows crashing solved?

  Method 1: Run a virus scan

  I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

  You can delete the files in the user account and create a new user account after the Virus Scan.

  Method 2:

  Follow the link below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  I suggest to follow the link below and follow the steps and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  Also, I suggest you to follow the link below and check if it helps.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Let us know if it helps.

• Restart the system created the new user profile

  When trying to connect to my laptop (before leaving), I have a blank screen with only a cursor before I could log on to the computer. I got tired of hitting CTRL alt del to get into the Task Manager, but he did not do anything.

  Then, I held the power button for five seconds to turn off the computer and restart it.  When he started upward, it showed an error that says the computer is not stopped correctly and on this screen, there are several options to reboot windows, I chose the option "restart windows normally" I could connect with my fine existing password, but when the windows actually open, my experience had changed and all my files are gone.  After some research, I found that all the old information of my were still there, but a separate user profile had been created and everything has been re-pathed to the new user.  The new user profile name was my existing profile name, then my name with a .pc at the end (ie. user name - username.pc).

  My questions are twofold: one) what the hell happened? and (b) what is the simplest to make everything re-pathed to my existing user profile.

  Thank you

  You have been put in a temporary user profile because the original was damaged. You can try the techniques below. If this does not work, let me know and I'll give you another path.

  Critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  If this is not the case, make the changes and try to connect as this user.

  More details of MVP Aaron Tiensivu - assume in this example that the user name is "atiensivu", field is "personal" and the user profile is located in % systemdrive%\users\atiensivu. Letter is usually C: on standard Vista installs. Replace each instance of "atiensivu" by the username of the corrupted profile.

  1. If you can log in profile, take note of the variable value environment % USERPROFILE. It will probably be "C:\Users\atiensivu" or "C:\Users\atiensivu.staff". Logoff.

  2. If you have opened a session with the profile at any time since your last reboot or you think that there are files in use in the profile, reboot. The important part is to ensure that there are no open files in the directory of the profile broke.

  3. log in as administrator or another account that has local administrator rights.

  4. run "takeown /r /a /d y/f % systemdrive%\users\atiensivu.

  5. starting at % systemdrive%\users, rename "atiensivu" to "atiensivu.old".

  6. in % systemdrive%\users, create a directory named "atiensivu".

  7 run "takeown/r/u staff\atiensivu/f % systemdrive%\users\atiensivu".

  8. run regedit and go to HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList and remove the SID key to the corrupted profile. Best way to find the correct SID is looking for the 'ProfileList' key to the directory mentioned in %UserProfile% in #1 step.

  9. closure of the session.

  10 log on the account "atiensivu". A new profile must be created. Copy all the files you can of the old profile directory.

  Orders "takeown" might be overkill, but I don't like permission errors.

  MS - MVP - Elephant Boy computers - don't panic!

• Java error - change profile data collection scheduled

  Hello community!

  I am a new user of the NMP and trying to download data from my CSP collector on the smartservices portal.  I get a java error on two different computers with different versions of java (7u40, 8u71).  Anyone seen elsewhere and know a fix?  My CSP is 2.5 v.

  I get the following error when I try to save the changes to the profile collection by default (the schedule).

  Please let me know if you need more details and thank you for your time.

  collection_settings.jpg

  

  Error.jpg

  

  Hi Jarrod,

  SSH on the manifold and run the command "sudo service epsc restart" and then reconnect and try again. Looks like that the service may be suspended.

  Thank you

  Lynden