MF hangs at startup, but works in safe mode and a few minutes after I made a new user, can anyone help?

Similar Questions

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• Firefox crashes at startup, only works in safe mode

  Hello.
  As the title says, I can't start Firefox because it crashes instantly. It only works in safe mode.

  That's what I've tried so far, but it did not work:

  Restored Firefox.
  
  Reinstalled Firefox and also delete my profiles.
  
  Hardware acceleration disabled.

  These are my recent incident reports

  bp-114dcdff-7b46-425b-8ec0-478102140218
  bp-464d26b6-4530-4230-8e4f-5000e2140218
  bp-7b489bc8-20ed-4cb5-9d3a-233a02140218
  bp-6a0e5565-1f66-4606-8c29-8ac292140218

  Thanks in advance, I hope you can help me.

  Thanks for your answers, I've updated my graphics card driver, now I can use Firefox out of safe mode with disabled hardware acceleration.

  There is another problem now, Firefox crashes when I try to start with Profile Manager, I use two different profiles, so I need this feature.

  Here are two reports of incidents on the problem:

  BP-a257ee60-b8d6-495c-82a3-605572140218

  BP-2e19ad39-84c5-4BD6-B251-fcbaf2140218

  Thanks for your help and sorry for my English.

  EDIT: I had to repair my installation of windows with the installation disc, now Firefox works, thank you Tyler and cor - el for your time.

• I have Photoshop CS4 and I need to reinstall CD after a computer crash and reinstall Windows 7, but it will not be reinstalled I think because he used to completely uninstall. Can anyone help?

  I have Photoshop CS4 and I need to reinstall from CD after a computer crash and reinstall Windows 7 but it will not reinstall.

  This could be to uninstall because it used entirely from the control panel of Windows 7.  Can anyone help?

  Uninstall what you can the normal way via the Control Panel, and then use the CS cleanup tool.  Then try to reinstall. You might want to try an installation download rather than the disc if it continues to fail.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• iMac hangs after connecting with the interminable spinning beachball, but works in safe mode.

  Plug

  iMac 27 "(mid-2010) running Os X El Capitan 10.11.4"

  Processor: 3.2 GHz Intel Core i3

  Memory: 16 GB at 1333 MHz DDR3

  Problem

  With a normal startup, iMac will start properly and I can successfully connect. Once connected, I immediately get a popup window stating "To open"CS5ServiceManager", you need to install the runtime Java SE 6 legacy." I have the opportunity to click on 'Détails' or 'OK', if I click on what anyone, I immediately get the spinning beachball. I'm sure that he ran the updates at night, because the next morning was when problems began to occur.

  With a sure start, I can connect properly, everything is and I can open applications, it's just very slow.

  What I have done (in no particular order)

  1 Ran first aid utility disk

  2 reinstalled OS X El Capitan

  3 reset the NVRAM

  4. the elements of disabled opening (Dropbox and Google Drive)

  4 Ran correctly in Safe Mode, but when I rebooted the problem still occurred.

  Recently I also upgraded my RAM from 8 GB to 16 GB, it has greatly improved the performance of the machine, and I don't have any problems so far.

  I'm almost to the point of wiping the device to its factory settings, because it is so frustrating me. I really don't store anything on site, everything is in the cloud, or on an external hard drive.

  Flora-flora,

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Mac will not load some web pages but works in safe mode

  Hello

  I am trying to solve the following problem...

  MacBook Pro with 10.11.3 will not load some web pages (booking.com people.com are just a few). Browser will not make a difference.

  Looked around the discussions and tried a few remedies but without success. for example, change the dns data, site reset or 8.8.8.8.8 create a new user and I have tried several different networks.

  All the site will load in safe mode.

  Thank you guys!

  If they load in Safe Mode, then it is a third-party plug-in or software blocking sites while not in Safe Mode.

  Do you have the third-party antivirus or firewall? Do you have any unknown third party plugins or extensions?

  Open the Finder, click go > go to folder, copy and paste the following and click on Go

  ~/Library/Internet plug-Ins

  This is where your plug-in user. By default, this folder must be completely empty, so anything here has been added either by you or with 3rd party software that has been installed. You can move anything in this folder on the desktop and then try with your sites. If this works, your choice in their folder one by one until it doesn't. Remove the problem and it redownload only if you really need.

• computer blocks only works in safe mode and error blue screen BCCode: 116

  specifications of the computer.
  Windows vista Home premium 32-bit
  Error Msg

  -stop enexpectedly

  Signature of the problem

  Problem event name: BlueScreen

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Files helping to describe the problem (some files may be is no longer available)

  Mini052711 - 01.dmp

  SysData. XML

  Version.txt

  See a temporary copy of these files

  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem

  BCCode: 116

  BCP1: CF 892 008

  BCP2: 90B 22036

  BCP3: 00000000

  BCP4: 00000002

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 768_1

  Information about the server: 2528169f-3730-4b08-b413-9ffae78c8aa8

  Hi Manju,

  Remember to make changes before this problem?

  If the computer works fine only in Safe Mode, then some present third party software on the computer may cause this problem.

  
  Method 1: activate the boot and then check if the problem persists

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  
  Method 2: you can follow the steps described in the article below, which addresses the problem of blue screen

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

• can't get off computer safe mode and windows Explorer I have active log manually everytime how can solve this too google always redirects me ever time I click a link

  by widows Explorer, I hear my counter top and my screen shows just how safe in every corner and when I click on a link on facebook, he sends me somewhere like yellow pages or somewhere tottally not where I want as I can't install updates

  Hi, James.

  Restart the computer

  The Logo of the manufacturer, start tapping F8

  Select Mode safe mode with networking

  Download this tool and perform a full scan

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  Difficulty hijacked browser

  http://www.Microsoft.com/security/PC-security/browser-hijacking.aspx

• The user profile Service service has no logon. User profile cannot be loaded. Then I deleted my user profile in safe mode, and when I connected, all the files in C:\users\(old users name) are all gone

  I use Vista Home Premium

  1. Windows automatically updated and turn off the power.
  2. I couldn't connect, it says that the service user profile service does not logon. User profile cannot be loaded.
  3. Then I deleted my user profile in SafeMode by doing: 'make right click on computer - properties - settings - advanced - user - deleted my old account profile settings '. There is no option for me to "keep my files."
  4. Then I managed to connect, I guess having creates a default user account? Because there is a new folder in C:\Users\, called (former name). (old name) - PC. In C:\Users\(old name), it is empty.

  Now, all my original files are gone because I deleted my old user profile. The size of my c: drive-has not changed much, so I guess all my files are still in only my computer, it's just that I can't find their "PATH". How could I get re-navigate to all my files? I need them so badly.

  Thank you very much for the one who can help me.

  Hello

  Log on as ADMIN and look in C:\Users where C: is the drive where the user folders.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 26 of Firefox crashes at startup. Works in safe mode.

  Start the program, it goes immediately to the crash dialog box.
  The last 5 crash reps:
  BP-626c7940-49ba-4D4E-9e3c-5de8a2131226
  BP-17189cc9-1969-4e6b-B104-3ab9d2131226
  BP-b065527a-c18f-4BED-BBF9-d298a2131226
  BP-a5300903-1b4d-414e-8241-385332131226
  BP-2de5beb7-9da9-4700-A671-3ab3d2131226

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Custom settings (no reply) 2 k 8 R2, but works in safe mode

  Hello

  2 k 8 R2 server with sp1 works well until the login after registration in it crashes at black screen for normally using users and for the other user who is registered for the 1st time in server maintained for security arrives and stops at the custom settings...

  Manager tasks also does not work...

  Other roles like DNS or DHCp or smb etc works well...

  Help, please...

  My prob. is solved by disabling "Microsoft.NET Framework NGEN v4.0.30319_X86"

• my computer only works in safe mode and will not start in normal mode I have no virus, what could be the problem

  I get the blue sreen with theses messages
  0 x 0, 00000000 00000001

  I get the blue sreen with theses messages
  0 x 0, 00000000 00000001

  I don't know what your problem is, but I would point out that when you say "I have no virus", you could very well be wrong

  No antivirus program is perfect, and the more popular (Norton and McAfee) are among the worst. Just because they do not catch something doesn't mean you're not nfected.

  In addition, more virus there are other types of malware, such as spyware, and even if you have no virus, you could be infected with spyware.

  For an anti-virus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one (do not run more than one) of the following three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software (even if you run a program like Microsoft Security Essentials, with anti-spyware feature integrated into it). I recommend that you download and
  install MalwareBytes AntiMalware (freeware)

• Windows Vista works in safe mode but not in normal mode. Desktop freezes and cannot go to the Task Manager

  My laptop (Dell Inspiron; Windows Vista Home premium 32 bit) works on safe mode and safe mode with n/w mode. When I try to boot into normal mode, it comes to the screen asking my password. You can enter the password. Then, it loads the screen saver and freezes. I see a green circle turning. He never stops. I tried ctrl + alt + delete. It does not work. I did repair the system. No use. I tried the system restore. It shows a file as OS (C :) and another as recovery (x :). I chose the recovery (x :) as file control. He has worked and showed a message like system restore successfully in safe mode. But the normal mode of sill is freezing after the password screen.

  Hello

  • All changes made on your computer prior to this question?
  • You have an antivirus installed on your computer?

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Also try running a Virus scan using a live care online utility.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/Security_Essentials/

  Follow the steps mentioned in the link below

  How to get rid of malware.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Let us know if this helps

  Concerning
  Anthony.

• Dell Inspiron 530 Vista, a constant noise of rattling, but not in Safe Mode

  Computer is Dell Inspiron 530 and four years.  Never been bothersome before.

  Begins once the system is fully booted and is constant.  However I can listen to music while the click is faintly in the background.  Tried all fixes listed below (although I don't have a listed his card and she didn't reinstall the hi tech audio - drivers they have reinstalled automatically when I rebooted).  My antivirus software is up-to-date and trustworthy and I scan the computer regularly.   I work from home and must be able to make email conference calls.  My concerns are that it will not interfere with my interactions with colleagues and clients.  I tried to work in safe mode and clicks do not occur.  Help, please!  I'm at my wits end with

  Hi Soovey

   

  You can perform a clean boot and check. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -

  http://support.Microsoft.com/kb/929135

  If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• Firefox hangs before opening, but does not work in safe mode

  Firefox start, sometimes the browser window will open, but either way it hangs completely seized of the charges. I can open it in safe mode and have tried the suggestions of "Troubleshooting extensions and themes", but it hangs still, even with all add ons and extensions disabled, after removing and reinstalling the latest version of Firefox and reset the toolbar.

  Your crashreport:
  https://crash-stats.Mozilla.com/report/index/BP-f144bda2-12d0-4a31-94f8-318662111109
  This is caused by report of Trusteer. Try to disable it and see if that stops the noise.
  You can stop the report by using the Start Menu > programs > Trusteer report > report stop
  You can ask their helpdesk when a version update of their products will be available or, if you do not need this software, uninstall.
  http://www.Trusteer.com/support/en/report-problem
  According to the user in question 892517 Trusteer is aware of the problem and working on a fix.
  See also Bug 699776 - crash of nsXPTCStubBase::QueryInterface involving a RapportTanzan7.dll in the stack.