New user trying to create this simple function of Xcode
I'm a programmer windows trying to learn Xcode / swift.
How can I get this simple function to work?
He complains about the pi in the line "access to".
I hope this is enough information.
Thank you
disp_to_acceleration Func (freq: Float, disp: Float)-> {Float
Let pi = M_PI
Let accel = disp * 2 * powf (freq * pi, 2.0)
Back to accel
}
Oops error in the post "Let's accel.
Tags: iOS Developer
Similar Questions
-
I am trying to create new users on my computer windows 8 but it dosent open, I get a message "the service user profile service has no logon. User profile cannot be loaded. "and new users are not created in the registry, that is it please help
I had the same problem. Get the «user profile service has no user of logan...» "I tried everything I found online and nothing has worked. Then I reinforced to the back and looked at the whole picture. It turns out that it wasn't a computer after all problem but a question of the user. Under folder C:/users/default in the end I managed to delete all subfolders except appdata. So when you went to create a new user he could not find the correct files to copy to the new profile to store information in. To ensure that I had a correct records back into the C:/users/default folder, I went on another computer and just copy paste the new default folder from another computer in the folder users on my computer and erased mine. Of course I could create my comments and new users account once again. Finally. -
New logon user - new user account is created, but it does not work
I have Windows Vista Home Basic Edition. My computer has suddenly developed a little problem on user account and the guest account. Every time a new user is created in the user accounts in the Control Panel, or the guest account has been enabled, users cannot open a session. Any attempt to these users or comments of logon is greeted with "service user profile Service does not have the logon - user profile cannot be loaded." When the new user is removed, and is used to save all the files, there is no file to be saved.
The problem is not a corrupt profile or SID which should be deleted or renamed and so on. The problem is that when I create a new user through user accounts in the Control Panel, no profile or anything else seems to be created with it. The computer shows absolutely nothing more than the new user in the title of the user accounts and on the logon screen. The new user is not in the settings under the my computer properties. There is no document (desktop and so on) for the new user in Windows Explorer; There is no SID for the new user. It seems that there is no profile or anything for the new user. System Restore could not help, because the incident that wiped out all system restore points also annihilated profiles. There is no '.bak' file in the registry for all users.
I have the same problem with the guest account. There is nothing in the browser to indicate the existence of a guest profile. It doesn't seem to be a SID for the customer. The guest account cannot be used because any attempt to logon as a guest is greeted with "service user profile Service does not have the logon - user profile cannot be loaded."
Yes, please is there someone who can help us solve the problem of not being able to effectively create new users and have a guest account. Thank you.
Hello temp8127,
Thank you for your answer!
You can do a 'repair Start Up' but will have installation disc. If you perform a new installation, then Yes you will need to copy your personal files on a device. Please let us know status.Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged, that might prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx#ex
NoteIf your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions. Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
New user lost. Need of simple questions answered
I received a short time trying to configure vmware 5 for virtualizing office in a university setting. Especially for our laboratories and public machines. I have a few thin clients from Wyse, I can try with Dell
We are a single network MS most of the time. I have been using HyperV about everything for a while. But VMware and the structure baffles me.
I just set up a test environment for a few thin clients. I need someone to straighten out the mess of servers required for vmware view
Servers connection composer, ESXI,... etc.
What must be a physical server? Can I install several things on a server? can I install anything on a hyperV VM to test or all should there be physical? My Manager gave me a server unfortunately exceeded to try this and I think it's impossible. How can I install everything first? VMWare for Dummies anyone?
The basic components:
* Shared storage - iSCSI, fiber, NAS (not recommended, but an option for a small number of workstations or for verification). In addition, required hardware (Ethernet or fiber) of switching. You can use local storage, but you lose your availability with vMotion or light HA.
* ESXi host (s) - the number depends on the size of the environment.
* SQL 2005 + database - physical or virtual.
* Active Directory
* Good MS licenses depending on the type of clients you are going to use. Example: You may have to pay for the VDA licenses, if you use clients which don't run Windows natively to connect to virtual desktops.
* Computers desktop, laptops, zero customers or clients to access virtual desktops.
* Discover the connection to the server - physical or virtual (Virtual is recommended).
* vCenter Server - physical or virtual (Virtual is recommended).
* Security Server - it is used to tunnel securely sessions of WAN links to your connection/Server Manager view if you want clients to be able to connect securely from the outside or to secure your network part where connection (s) are located.
Basically, install you ESXi on your physical boxes, build your decision-making supported virtual servers, lift the display and running management environment, then start to build your virtual desktop and create then pools that your client devices will connect to the.
I don't think one host will be sufficient for to accomplish you everything and it is not really a good test because you will not get the high availability features or vMotion and looks that you have no access to the shared storage.
The documents posted on the link below will give you all the information you need to get running.
-
New user of mine created cannot access hr tables despite I gave to her permissions
Good night:
I'm accessing the employees of hr user with a user table I just created ("pepe") which I have given all the permissions. I connected with the HR user and gave 'pepe' user permisions all over the table (HR) employees.
Then I left the game with HR and connected with pepe. I went to the screen of sql commands and tried to do a select on the Employees table (select * from employees ;) but I got an error.)
Does anyone know how to access the Employees table with 'pepe' user who is not its owner and make a selection, or an insert / update or delete.
Thanks in advance.Have you tried:
select * from hr.employees; -
What is the minimum size that takes if the new user account is created in windows 7 or 8?
It can be the guest account, which is the minimum size, it reserves in admin account.
If Yes, then what may be the ability that a windows operating system can create multiple user accounts?
Pls answer me as soon as possible,... consider the system a 500 GB hard drive respond me accordingly.
There are forums dedicated to address issues related to the design and attributes within Windows.
It is advisable to post on http://social.technet.microsoft.com/Forums/windows/en-US/home
-
New user of Windows 8. Simple question - how to access the Solitaire game on Windows 8?
Just bought a new desktop computer with Windows 8
There can be no pre-installed games. Go to the store and get the games you want.
Or if you want the files executable you can get on the net. Don't know if its legal... -
I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I just installed the plugins from Active Directory 1.0.2 and I'm trying to a create user AD using Orchestrator 4.2.0 script. I use Windows 2008 R2 as my Active Directory server.
I get this error when I use the port 3286 (using GC):
"Failed to create a new user: InternalError: cannot create the account of user...". [LDAP: error code 53-00002035: LdapErr: IDDM-0C090BF4, comment: operation not allowed through port GC, data 0, v1db0] (Workflow: NewUsers/Create User (point 7) #6) »
I get this error when I use port 389 (the default port):
"Failed to create a new user: InternalError: cannot create the account of user...". [LDAP: error code 53 - 0000052D: SvcErr: IDDM-031A120C, problem 5003 (WILL_NOT_PERFORM), data 0] (Workflow: NewUsers / Create User (point 7) #3) (Workflow: NewUsers/Create User (point 7) #6) »
Configuration server-side seems good. I use the same information as the LDAP configuration (without the box copy) and I use a Director as the user (until I can fix this error).
It's the line of script that may cause the error:
userOU.createUser (domainName, accountName, displayName);
where accountname, domain name, and displayName is string and user is a valid ORGANIZATIONAL unit selected using the graphical interface.
Someone has any idea how to solve this problem?
Thank you
Phil
Quite possible restrictions on password as Joerg says... If this is the case, you must configure the AD plugin to use SSL - to do this, you must import a domain controller authentication certificate to vCO. This certificate will allow the vCO establish a secure connection to your domain controller to create new accounts of users per password
Good luck!
-
How can I create a new user account any movement towards it and delete the old
Win7 need to create a new user ACCT. move all the Info for it because want to rename the computer, and then delete the old user account
To create a new user profileTo create a new profile, you must first create a new user account. When the account is created, a profile will also be created.
Open a user account by clicking on the button start
, by clicking on the Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.Click on manage another account.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.Click on create a new account.
Type the name you want to assign to the user account, click an account type, and then click on create an account.
To copy files to the new user profileAfter creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
Log on as a user other than the new user that you created or the user that you want to copy the files.
Open Documents by clicking on the button start
, and then clicking Documents.Click on the Tools menu, and then click Folder Options.
If you don't see the Tools menu, press ALT.
Click the view tab, click hidden files and folders, clear the Hide protected operating system files check box, and then click OK.
Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.
Select all the files and folders in this folder, except the following files:
Ntuser.dat
Ntuser.dat.log
Ntuser.ini
Click the Edit menu and then click on copy.
If you don't see the Edit menu, press ALT.
Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.
Click the Edit menu and then click on paste.
If you don't see the Edit menu, press ALT.
Sign out and then sign back in as a new user.
If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.
-
How to remove an admin account and create a new user profile
Hi, I have been using my 2 in 1 PC since July last year and I'd like you guys to show me the steps on How to remove an admin account and create a new user account.
Hello Nicolas,.
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
1. you try to delete a local administrator account?
2. are you able to connect using the Microsoft account?Thank you for your query details.
I also like the fact you want to know how to remove an administrator account and create
a new user account.
If you are able to connect on the Microsoft account, I suggest you try the following steps to remove an administrator account.
a. press Windows + X keys and click on computer management.
b. click on "local users and groups" and then click on "users".
c. right-click on the account which you want to remove, and then click 'Remove'.
d. click 'Yes', if the prompt message.To create a new user account, please see this article:
Create a user account
http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8See also:
User accounts: FAQ
http://Windows.Microsoft.com/en-us/Windows/user-accounts-FAQ#1TC=Windows-8I hope this information helps.
Please let us know if you need more help.
Thank you
-
trying to get used to sql * more running and creating a simple procedure
Hello all;
I'm getting used to sql * more after using for a while using pl/sql developer.
I am trying to create a simple procedure and run it. See my procedure below
and then I type in run hr.test ("J", 10); to run this and then press ENTER, and it does nothing. How can I run and create a simple procedure in sql * morecreate or replace procedure test(t in varchar2(200), limit in number(30)) begin select tbl_report.id from tbl_report where tbl_report.id like '|| t ||%' and rownum <= limit; end test;Hello
In addition to all the good points, others have done:
When you issue a SELECT statement in SQL * Plus (or any other front end) two things happen:
(1) a result set, containing the results of your query, is produced, and
(2) this result set is displayed.
Given that these two things are always done together, it is easy to forget that they are two different things.
In PL/SQL, you must explicitly do something to catch the result set, and you must explicitly do something else to view it (if you want to display it).A simple way to get the result set is to use a cursor FOR loop, to extract a line at a time and run code with this line in a record variable (called the country in the example below).
View the results is to call dbms_output.put_line.Here is an example:
CREATE OR REPLACE PROCEDURE test ( t IN VARCHAR2 , lmt IN NUMBER -- LIMIT is an Oracle keyword; best not to use it as a variable name ) IS BEGIN FOR country IN ( SELECT country_name FROM hr.countries WHERE country_name LIKE t || '%' AND ROWNUM <= lmt ) LOOP dbms_output.put_line ( country.country_name || ' = country_name' ); END LOOP; END test; / SHOW ERRORSYou can use variables, such as t and lmt, in the query without using dynamic SQL, as long as the variables do not have the same names as the columns in the table. In this case, t and lmt are good names; country_name or region_id wouldn't. (In fact, t is a reputable insofar as it cannot be confused with a column in the table of the country. T is not a good reputation in the sense that it does not give much information about what contains the variable, or how it is used. Why not call the variable target_name or name_a_trouver?
You can run the SQL procedure * more like this:
SET SERVEROUTPUT ON EXEC test ('I', 2);If you issue the SET SERVEROUTPUT ON command, then you will not see the output of dbms_output. You must only issue the command SET SERVEROUTPUT ON once per session, but nothing bad happens if you do it more than once.
When I ran the procedure as stated above, I got this output:
Israel = country_name India = country_nameNotice that "The Italy" does not appear, because lmt has 2.
Do not create your own procedures, tables or other objects in the HR schema, or among all the other patterns created by Oracle. Create your own schema and create procedures and other objects in it.
-
trying to create a flash Gallery
trying to create a simple clickable slideshow.
My problem that I believe is in the calculation. but I have clickable picture buttons left and right. the Center interactive too.
I want to know how can I increment decrement variable depends on the direction.
Currently, it seems to go in a direction that is on the right.
also I can make a table of functions: function-ex animate [County](e:event): void
or functions manage the tables differently.
Sorry if I look stupid but its been done for some time flash.
Here is the code:
var photo: Array = new Array();
Photo [1] = new pic1();
addChild(picture[1]);
Photo [1] .x = 50;
Photo [1] there = 384;image [2] = new pic2();
addChild(picture[2]);
Photo [2] .x = 512;
Photo [2] there = 384;
.scaleX photo [2] = 10;
.scaleY photo [2] = 10;image [3] = new pic3();
addChild(picture[3]);
[Fig.3] .x = 974;
[Fig.3] there = 384;.
.
.
var counter = 1;
Photo [1] .addEventListener (MouseEvent.CLICK, animate1)
function animate1(e:MouseEvent):void
{
trace (Counter);
Photo [counter + 1] .x = 50;
Photo [counter + 1] there = 384;
Photo [counter + 2] .x = 512;
Photo [counter + 2] there = 384;
Photo [counter + 2] .scaleX = 10;
Photo [counter + 2] .scaleY = 10;
Photo [+ 3 counter] .x = 974;
Photo [counter + 3] there = 384;
counter ++;
}.
.
.
5 more similar eventlisteners and function
Sorry I think I misread your code before when I answered. Well I think I have a working version of what you're trying to do. You can view what I did to http://www.jeremyseverson.com/as3/flash_gallery/index.html . I created this in straight AS3, but it should give an idea of what I did and give you advice to achieve what you want.
package { import caurina.transitions.*; import flash.display.Bitmap; import flash.display.SimpleButton; import flash.display.Sprite; import flash.events.MouseEvent; [SWF(backgroundColor="#000000", frameRate="31", width="800", height="300")] public class Main2 extends Sprite { //-------------------------------------------------------------------------- // // EMBED ASSETS // //-------------------------------------------------------------------------- [Embed(source='assets/rightArrow.png')] private var rightArrowClass:Class; [Embed(source='assets/leftArrow.png')] private var leftArrowClass:Class; [Embed(source='assets/IMG_0001.JPG')] private var img0001Class:Class; [Embed(source='assets/IMG_0002.JPG')] private var img0002Class:Class; [Embed(source='assets/IMG_0003.JPG')] private var img0003Class:Class; [Embed(source='assets/IMG_0004.JPG')] private var img0004Class:Class; [Embed(source='assets/IMG_0005.JPG')] private var img0005Class:Class; [Embed(source='assets/IMG_0006.JPG')] private var img0006Class:Class; [Embed(source='assets/IMG_0007.JPG')] private var img0007Class:Class; //-------------------------------------------------------------------------- // // PRIVATE VARIABLES // //-------------------------------------------------------------------------- // Layout Properties private var imgPad:Number = 5; private var imgScale:Number = 2.5; private var btnSize:Number = 25; private var imgCounter:Number = 0; private var middleImgX:Number = 400; private var leftImgX:Number = 100; private var rightImgX:Number = 700; private var leftImgTransX:Number = leftImgX - (middleImgX - leftImgX); private var rightImgTransX:Number = rightImgX + (rightImgX - middleImgX); private var imgY:Number = 150; private var imgLeft:Sprite; private var imgMid:Sprite; private var imgRight:Sprite; private var imgTransIn:Sprite; private var imgTransOut:Sprite; // Image Array private var classList:Array = new Array(img0001Class,img0002Class,img0003Class,img0004Class,img0005Class,img0006Class,img0007Class); private var spriteList:Array; private var currImages:Array; //-------------------------------------------------------------------------- // // CONSTRUCTOR // //-------------------------------------------------------------------------- public function Main2() { init(); } //-------------------------------------------------------------------------- // // PRIVATE METHODS // //-------------------------------------------------------------------------- private function init():void { initSpriteList(); updateInterface(imgCounter); } /** * Creating an array of sprites so that my registration point * will be in the center of the image instead of the upper left */ private function initSpriteList():void { spriteList = new Array(); var tSprite:Sprite; var tBmp:Bitmap; for (var i:uint=0; i -
New user account not visible in C:\Users
Hello
I hope someone can help me, my OS is Windows 7, and after the execution of some updates my wife account rendered by the following message appears during startup, after entering his password: The Group Policy Client service is not logon. Access is denied. I did some research online and tried to solve this problem by using the system restore, but these attempts have failed, restore and resolve the issue, I finally go back to a time before the restore. Another suggestion was to create another user and migrate all files in General, that this seemed to be a solution, to the point where I needed to find the new user that I created, just, he did not appear in c:\Users, there was a reference to the fact that I would need at least 3 users on the system to accomplish this transfer I , but just to be sure I created another user but this does not seem to be.I have show hidden files and folders checked (but why these new users need to be hidden I don't know).The only users that should be in the file I think are: administrator, by default, Jim, Public and Verena, yet I have a lot of other files which some I think that created Xbox which I can't delete it, it may be a permission problem, but knowing that doesn't help me because I do not know how to get the necessary permission.I am now at a loss as to what I do, any help would be very welcome.Kind regardsJim ClarkeThe folder that you see in the C:\Users folder for a user is that 'user profile '. Simply create a user does not create a profile. After you create this user, you must connect to the computer as that user so that the folder to create in C; \Users folder.
Duplicate of variant records "PC - Jim. 00 x" would indicate that you had profiles corrupt in the past and these are "temporary" profiles that still exist. Corrupt profiles are almost always caused by the Corruption of system files, so you must perform a 'Check disk' operation as best as possible, by specifying the 'Repair' option to ensure that your file system is in good shape.
«Check your hard drive to find errors in Windows 7»
<>http://support.Microsoft.com/kb/2641432/en-us >
A few things you need to know:
- The real disk check will be presented at your next reboot and runs before Windows load fully and cannot be interrupted
- The disk check can take more than a few hours depending on the size of the disk and the amount and type of corruption - sometimes preferable to from one day to the next.
- Sometimes, with certain types of damage, it can delete files or cause your system to start - so make sure that your 'important' files are backed up before performing this operation. (By definition, however, the 'Important' files are always saved)
HTH,
JW
-
I went to set up a new user account, but it deleted my old one with all my files. What can I do?
I've just set up a new user account for someone else, but now I can access is no longer my own user account that had all of my files, pic, and setting. How can I get this back account that has all my files on it?
Initially, you were using the original built-in Administrator account. When you do this and create a new user, the built in Administrator account becomes hidden (but it's still there). It seems that you are OK with that, but you want your files transferred to your new user profile. In this case, you must follow the same procedure as you would if the old profile was corrupted. To claim that the administrator account has been corrupted, and then follow the steps in the following article:
"How to copy data from a corrupted to a new profile in Windows XP user profile"
<>http://support.Microsoft.com/kb/811151 >HTH,
JW
Maybe you are looking for
-
How to change the ink on an Epson Stylus SX415All-in-One Printer Cartridge
Can someone tell me where the ink cartridges and how to replace them if you please. A video would be useful. Thanks X
-
Lost mail in Windows Live mail 2011
I have several problems with Windows Live mail 2011. I have archived emails in a folder - under "storage folders". In the preview, there are 3 emails - all looking for good - but when I see the content- as the former email of 2007 - which has nothing
-
ERROR POPS UP EVERYTIME I OPEN AND IT SAYS WINDOWS IMAGE ACQUISITION SERVICE IS MISSING
MISTAKE TO REPLACE ON VISTA
-
Burn or copy a family movie from my DVD on my computer
I have wan to know how to burn or copy a movie family a DVD on my computer so that I can then modify it with my Windows Movie Maker.
-
Printer error state now that I downloaded windows 8! lose patience!
I downloaded Windows 8 and now I have my printer canon used print Cannot communicate with the printer printer error state, and indicates Turning on bidirectional printing, which deselects itself instantly. Please help I'm losing my mind and must be a