New Windows 7 Installation takes up 120 GB

Similar Questions

• Update of new Windows 7 installation problems

  Hello

  After windows 10 road test for a few months, I decided that it wasn't going to work for me. So I used my drive of windows 7 to do a new installation, after I formatted the hard drive. I installed the operating system successfully, but when I do the 200 some setting to update and to install as failure 8 and it asks me to restart, I do. After he completes the updates I login and then the screen is black except for the cursor that I can move around. I did that only connected things are a monitor, keyboard and mouse and Ethernet and always have the same question.

  I restarted in safe mode, and I am able to do throughout, on the desktop, no problem. So that being the case I thought I could do a system restore and updates from another chance. Well, I did this 3 times now with no luck. I even downloaded the diagnosis of WindowsUpdate tool and when I run it I get the error code "0 x 80070002.

  I honestly have no idea what to do and have not found help online.

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• New Windows XP installation

  I installed a new motherboard in my computer and do work I had to do a fresh install. I had to slipstream sata drivers and now I get an error saying that the activation code is not valid. The code works when I use my drive, origanal but nt with slipstreamed. What to do next?

  Slip sreaming & xp still does not work, xp security is the reason.

  With SATA or RAID drivers/software, once one starts the pc for xp

  installation (for a ' clean install') CD, you get a message press F6

  key for the SATA drivers, once that xp gets go to the menu of his cd, an installation

  screen shows, install the appropriate drivers by inserting a floppy disk, MS-DOS

  formatted diskette would have drivers, those who come from the material MB

  MFG web site. Once its installed, xp can then proceed to its installation

  menu. If youre not not pressing F6 installation of xp is not done properly...

  Read the manual of the owner for the pc.

• New Windows XP installation disc required?

  I have a plu Sony notebook comes with pre-installed XP Pro and I would perform a clean reinstall of the operating system. Restore disks from the system that comes with it (no Windows disk was provided) force the partition from the C: drive to a maximum of 15G (for some reason any) with the rest of the HD (60G total) space assigned to a logical drive D:. In addition, the recovery process reinstalls the original beam of s/w that is now mostly obsolete and unnecessary. That leaves very little space on the C drive for additional applications and many of the old Sony uninstall apps causes system instability.

  If I could just re - install Windows XP on a single partition without all other garbage, I'm back in business. But, I can't seem to find a way to get a new copy and license of Windows XP (there are a lot of fakes out there, but I'm not interested).

  The computer does not have a sufficient memory for Windows 7 and I have a few important apps that does not work under Vista, so what, if any, options are available to me?

  Any advice would be appreciated.

  If your computer has an i386 folder, then you might be able to try this procedure.

  http://www.howtohaven.com/system/createwindowssetupdisk.shtml

  I did it with XP home SP2 disc.  It is installed with success twice on the same computer.

• Install Windows 7 installation compromised by Linux

  Yes, I don't know, a major mistake - the entire disk has been formatted & erased by installing Linux (Linux announcement). In addition, another Bobo was not a Windows 7 system image. The only good thing I did was to back up my personal information, files, documents, etc. on DVD. None of these service options (Windows or HP repair boot-cd) work because the recovery files have disappeared.

  That said, I wonder what are my options for Windows 7. The tower is a HP Pavilion Elite since 2009. He is no longer under warranty and the HP website, they offer is no longer windows complete recovery disks. Options I see there is only this - buy a new Windows 7 installation disc. Even that is questionable because he could not work on an exclusive HP machine.

  I have the product key Windows of the tower. Who can help to restore an installation of Windows? I typed the product key in a Microsoft page to download a new iso image of Windows 7, but naturally, he said that the key was a source property and to communicate with the manufacturer - as I mentioned, is that any help.

  Thanks in advance for your suggestions.

  Ben

  In fact, manufacturers are responsible for preinstalled OEM licenses. It has been so for a long time. Part of the reason, OEMs make significant changes in their configurations with a myriad of options, it would be impossible for Microsoft support hundreds of configurations out there.

• How to make Windows 7 32-bit to 64-bit without the new windows installation 7

  32-bit to 64-bit without the new windows installation 7

  Moving from 32 bit to 64 bit Windows 7 always requires an own (custom) installation of Windows 7.

  Since this is a clean install of Windows it takes you will need to backup your personal data (documents, pictures, music, etc. on a separate drive). You should also make sure that you have installation media, and product keys available to reinstall your programs.

  Most, but not all Windows 7 32-bit programs will be running on Windows 7 64 bit. Check the support of publishers of program site compatibility.

  32-bit and 64-bit drivers are not interchangeable. You should make sure that your hardware has drivers 64-bit available.

  For more information. Please see:

  http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions .

• When I open a new window in a new tab I have one or two legs more wanting to take me to different sites to help

  Windows 7, in firefox, if I right click on a link in a window to open it in a new tab or a new window, I get 1 to 2 additional windows or tabs that open up wanting to go to help the business office... it's like Mcafee does not work

  Hi, take a look at Firefox opens several times empty tabs or windows after clicking on a link. Also, be aware that it may be a malware issue, as mentioned and linked at the bottom of the article.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• "Stop 0x000000A5 the BIOS of the system is not fully ACPI-compatible every time as the installation of a new windows 7 integral over Inspiron 15R N5110.

  Hello

  I have installed Windows 7 ultimate 64 bit on many brands of laptops, but when I installed it on Inspiron 15R N5110, (core i5 and 4GBRAM). I faced an error at startup of windows 7 after completing the installation.
  NOTE: When the installation finished and restarted my computer, this window shown to me.
  
  
  
  Two options from the two options above I chose, I found myself with the blue screen:
  
  
  Error blue screen said something these ' BIOS in this system is not fully ACPI-compatible. Contact your system provider for an updated BIOS I don't know what that means and I don't know where is the culprit. I wish I could capture this error screen. However, it is impossible to do because I wasn't the Windows environment. 

  
  

  Even if the error related to BIOS necessary for the update, so how could I update as long as windows has not begun.
  
  
  
  
  
  
  
  
  Is there something that needs to be configured in the BIOS before installing Windows 7 on Dell laptops.
  I'm quite surprised that the previous system was windows 7, but it was Home Premium.
  
  
  The strangest thing is when I tried to start to repair the disk and even disk instillation of Windows to resolve startup problems, I found that this startup repair couldn't fix problems.
  
  
  When I tried to do these steps:
  
  
  1. Insert your Windows XP CD into the CD-ROM or DVD-ROM drive, and then restart your computer from the CD.
     Note Some computers may require you change basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For more information about changing the BIOS, see your computer documentation.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER.
     Note By default, the administrator password is blank in Windows XP Home Edition.
  5. By default, Hiberfil.sys is usually located in the directory root (C:\). At the command prompt, type del hiberfil.sys and then press ENTER.
  6. Restart the computer.
  When I arrived at "system recovery options, I saw that my system is listed, then I chose then, but I found myself with this ' this"system recovery options"version is not compatible with the version of windows that you are trying to fix." Try to use a different compatible with this version of windows recovery disk, even if I'm sure only that the same disk to install windows I have installed since.
  
  
  NOTE: I do not add RAM or other devices. There is a windows 7 Home premium and I just re installed a windows 7 ultimate 64-bit. I don't really know what the previous windows version 7 is 32 or 64 bit.
  I checked the dell forum and I found ' your computer goto your BIOS F2

  That goto advance Select ATA to instead of AHCPI save the setting, and then try to restart your Windows 7

  hope it will work. »

  But he did not AHCPI, but I found AHCI and let ATA instead of AHCI, but no difference that happened.

  Hello

  Check the steps suggested by LoneWolf1983 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/stop-BIOS-not-fully-ACPI-compliant/25210db0-5491-4fc8-99c2-ec0361dd8388

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Thank you very much

  I checked this thread, and I found this solves the problem

  I have changed the serial port in the BIOS for 2F8/IRQ3 and I have not had a blue screen since... fingers crossed, it's her!

  But as you know that no matter what BIOS are different from others.

  Thus, I have not found any serial port in the BIOS to be replaced by 2F8/IRQ3

  NOTE: My problem is when you install a new version of Windows.

  In addition, every time a new windows installation 7 and facing the Blue error screen, I started to Macrium Rescue CD and clicked "fix windows startup", and then when restart my windows, I was not facing the the Blue error screen. If windows starts successfully.

  If the blue screen error was tied to the BIOS, the Refelct Macrium rescue CD wouldn't no matter what (not know this problem)

• I need driver audio windows enterprise 8 for asrock g41m-vs3 r2.0 motherboard.my new windows is loaded, but not his driver .other that I got take advantage of windows 8 Please help.

  I need driver audio windows enterprise 8 for asrock g41m-vs3 r2.0 motherboard.my new windows is loaded, but not his driver .other that I got take advantage of windows 8 Please help.

  According to this site:
  http://www.ASRock.com/MB/overview.asp?cat=download&OS=all&model=G41M-VS3 R2.0
  There is no driver Win8 MB for. You can try to install the Win7 audio driver in compatibility mode.

  According to VIA, this Windows 8 driver:
  http://www.via.com.tw/en/support/drivers.jsp
  supports the VT1705 chipset, which is what your MB.
  (Step 1 - Windows
  Step 2 - Windows 8 bits - xx
  Step 3 - audio
  Step 4 - VIA HD Audio codec VT1702S, VT1705 VT1708B, VT1708S, VT1716S, VT1718S)

  SC Tom

• My firefox continues to open new tabs and new windows, takes me to infected wedsites which tells me that my norton. What can I do?

  Keep opening tabs and new windows. My norton says I'm to access known infected Web sites. How can I fix this.

  Thank you

  After doing the above.

  Adblock more {web link}
  Blocks annoying video ads on YouTube, Facebook ads, banners
  and much more. Adblock Plus blocks all the annoying ads, and
  supports Web sites by blocking is not discrete (configurable) default ads.

  Adblock Plus pop-up Addon by Jesse Hakanen-
  Pop-up Addon Adblock more {web link}
  Adblock Plus pop-up Addon - extends the functionality of blocking of the
  Adblock Plus for those annoying windows pop up that opens on the mouse
  clicks and other actions of the user.

• Takes half an hour or more for the new window to open it, toolbar functions stop working and sometimes I have to 'force quite' to exit.

  A couple of months, I forgot that I had left my computer on when I'm gone for browsing the web. When I came back a few hours later it pop ups promote pornographic sites on the screen. Firefox has been locked and I had to "leave power." Since then, I have problems to a new window. If I repeated attempts, several windows open at the same time a little later. Buttons on toolbar menu and toolbar buttons module runs at the beginning but often stop working after half an hour or two. When this happens, I generally have to 'force quite' to escape from Firefox. I tried to remove Firefox from my computer and download a new version, but the problem continues. No other program seems affected. I integro Virus Barrier X 5 and I use a trial version of X 6 but I have found no sign of any other malicious software. Suggestions?

  July 25, 2010, when I try to access my accounts to mutual funds to Dodge and Cox, they reject my user ID. If I do this using Internet Explorer, it works fine. The D & C, person that I talked to said I should check Firefox so that it has 128-bit security. How can I do this?

  Robert

• 8.1 Windows installation on my Windows 8 Pro, with the upgrade option, will keep my programs installed on my new windows?

  If I want to install windows 8.1 on my windows 8 prowith the upgrade option, you my installed programs will be installed on my new windows? My files will be keept?

  Original title: Windows 8.1

  If I want to install windows 8.1 on my windows 8 prowith the upgrade option, you my installed programs will be installed on my new windows? My files will be keept?

  As long as you install Windows Pro 8.1, Yes, your staff, settings, and applications files will be preserved.

• Ins work ' t Windows Modules Installer

  I tried to install Service pack 1, it failed due to an 0x800f0826 error.

  I discovered that the Windows Modules Installer, which is required for installation, appearently doesn't work.
  It is not listed in Control Panel > Administration > Services.

  I tried running sfc/scannow in cmd high, and it does not work.

  The TrustedInstaller file which is IS located in the maintenance folder in Windows, but I can't seem to run.

  I also tried to download a registry Fix TrustedInstaller, but it does not help. I tried this solution with PsTools and the file psexec - no difference.

  Also, I also tried to copy another TrustedInstaller in maintenance records, but that makes no difference either.

  I really need help here. Is it possible to get the installer of Modules of Windows to work? Download a new version of the installer of Modules if it is corrupted? My computer is not shipped with a CD/DVD of Vista, so I can't run a Vista repair.

  Please help me!

  You see the effects of a hijackware infection.

  Your quickest resolution would be to safeguard any staff data (which none should be considered 100% reliable at this stage) can do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  CF. http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Note: When you reinstall Vista, the free trial Norton will be also reinstalled (but invalid). You MUST uninstall it, and then rerun the removal tool Norton BEFORE installing a replacement AV app (e.g., F-Secure).

  NB: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you can use to do the clean install. Contact the OEM manufacturer with this.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Where can I get a Windows Vista installation disc?

  My old Acer laptop crashed about a year & a half.  I bought a new laptop.  The other day I plugged it to see what would happen.  He came & the guest a insert the Windows Vista installation disc.  Where can I get this drive?  Windows Vista came pre-installed with the laptop, so I do not have a disk with him.  Acer does not know because the laptop is out of warranty.  They told me to take the laptop to a computer repair shop.  Well, I don't want to spend that much money to find out what was on the laptop when it crashed.  Any suggestions?

  Hello

  There is no Windows Vista downloads available from Microsoft.

  As you never received a recovery disk when you bought your laptop Acer here is how to use the internal recovery Partition command which must be...

  "How do I restore my computer using the eRecovery Management program outside of Windows?

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. etc.

  And if you have problems with the help of the Partiiton of recovery and Acer supplies more recovery media for previous models preinstalled Vista, you may need to use this method:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows 7 Installation DVD not recognized.

  I'm trying to install Windows 7 on a new PC - no previous operating system. Hard drive is a Western Digital WD800 IDE. CD/DVD is a Sony CRX230ED. The CD/DVD recognizes CDs very well. But I put the Windows 7 DVD in there and it is not recognized.

  CRX230ED's rider to master. BIOS has CRX230ED at the first position in the boot order.

  Tried to start at Bart PE. that works because it loads a CD and not DVD. But I can't start Windows 7 installation because she needs to start in a Windows environment.

  Going nuts.

  This CD player is. You need a combination player that can play CDs and DVDs. If it is a new computer that someone built for you, take because they rip you off. Nobody in his right mind would put a plain CD - RW disc in a computer today. If you compiled yourself computer parts you hang out, pull the reader and the pitch. Replace it with a CD/DVD-RW drive instead. MS - MVP - Elephant Boy computers - don't panic!