New wireless keyboard/mouse replacement does not work without the transmitter into the USB port

Similar Questions

• the Windows 7 usb Installer may not work on the usb port 3

  Windows 7 install usb does not work on the usb port 3 with 32 GB usb 3 keys, says he needs a cd/dvd driver?

  but there is no cd drive in this machine.
  Works very well with an old USB 2 on usb 2 & usb ports 3 in the same machine.
  But no usb 3 key into a usb port 3?
  any ideas?

  Thanks anyway JW stuart.

  I managed to find a way to do it, I needed to set the usb drivers 3 unzipped on a 2nd USB on usb port 2 to use when the Setup program has been started and lost the USB 3.
  the ol F6 trick always works with win 7 and is more flexible, now that it allows pilots more than just raid.

• My touchpad does not work and the usb mouse works

  After connecting with a USB key, my touchpad does not work and the USB mouse works

  Hi, Dieudonné,

  Make and model of computer?

  Have you tried to uninstall the drivers for the touchpad.  Update?

• Mouse and multimedia keys does not work without the fn key

  Lenovo G500

  model without 20236

  Windows 7 sp1

  the mouse and the multimedia keys does not work without the fn key. Help, please

  [Original title: Lenovo g 500]

  Hello

  Check with Lenovo support, their drivers and documentation online and ask for their
  Forums about known problems.

  Support from Lenovo and downloads
  http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do

  Lenovo forums
  http://forums.Lenovo.com/ I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Keyboard event listener does not work in the browser

  Is there a reason why a keyboard event listener would not work if the flash is embedded in an HTML element? The rest of my game runs well in the background, but I can't launch the movieClip "nextCar." My code is below, if that makes a difference...

  goNow function (event: KeyboardEvent): void {}
  thisOtherKey = event.keyCode;
  If (thisOtherKey == 32) {}
  nextCar.gotoAndPlay (2);
  parkingQue.play ();
  tent ++;
  }
  }
  stage.addEventListener (KeyboardEvent.KEY_DOWN, goNow);

  This is perhaps a silly question, but have you tried to click on your swf file once it opens in the browser and then try the keyboard controls?

  I don't know any problems that may cause debugging workwhen event listeners, but not in a browser.  So I think that maybe your just not well centered on the swf.

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• Microsoft Wireless Optical Mouse 2000 does not work.

  Original title: mouse

  I use a Microsoft 2000 wireless optical mouse on my laptop and it won't work, even if you say that my device is not working properly

  Hey nanapaw,

  Please see two items of the below knowledge base for help.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Volume F4 - F5 key on the keyboard for mac does not work on the microsoft side

  Volume F4 - F5 on the keyboard for mac key does not work... on the side of microsoft may not decrease or increase volume

  Hello

  ·         What do you mean by Microsoft Side?

  ·         Have you tried to update the latest audio drivers for the computer?

  ·         Were there any changes made on the computer before the show?

  Also I suggest you to contact the Apple support:

  http://www.Apple.com/support/Mac/

  See also: http://windows.microsoft.com/en-US/windows/help/no-sound-in-windows

• HP Officejet Pro 8500 has 910 a, Vista 32-bit, does not connect via the usb port on my PC!

  I used to have it all in one connected to my pc, until I lived some printing problems, so I decided to uninstall it!  When I tried to reinstall, the pc will not connect it.  I tried different ports and have replaced the cable, have also downloaded the latest software and drivers all to nothing does not.  I can connect wireless to my laptop, but unfortunately is not a solution for my office because it is not wireless, so it must be connected via USB.  At my wit's end, please help me!

  Hello

  Can you try to insert a flash drive into one of the USB ports on the printer, to make sure she reads it?

  The printer port may be what gives you the question. In addition, you can try the USB printer connected to another PC?

  Let me know the results.

• I just bought the wireless desktop 800 Windows keyboard and mouse it does not work on the Windows XP desktop

  I just bought the wireless desktop 800 Windows keyboard and mouse. It works fine on my Win7 laptop but not on my XP desktop even if it says it is compatible with XP. Any advice?

  Hello

   

  Thanks to join Microsoft Community where you will find all necessary information about the Windows operating systems.

  You cannot use the Wireless Desktop 800 keyboard and mouse.

  The problem may occur if the devices are not detected.

  What exactly happens when you try to use the devices?

  A fixit could be used if the devices are not detected.

  See the site:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• new emails to get function does not work. The only way for me to get into the Inbox is to move the cursor on the top line through all the mail back to the Inbox

  It is difficult for me to return to the tab 'Inbox '. Now, I have to scroll to the left through the tabs until I get out of the Inbox to access all my emails.

  The general 'get new messages' does not result or response when I click it. Or not clicking my name specific email for work messages.

  Thank your for your help.

  TwoArrows

  I suggest to you that start close tabs message after reading them.
  Now right-click on a tab and choose close other tabs.

• keyboard and touchpad does not work once the PC wakes up from sleep/standby

  Please help find the diagnosis and explain in detail what to do with the following problem: keyboard and touchpad for PC with Win 7 Ultimate stop responding when you wake up from sleep/hibernate implementation modes. If you plug the USB mouse, the cursor move again come back to turn off the PC is to reload the OS from scratch. Where to look in the PC software?  Thank you for your competent answer.

  Hello
  I suggest that you follow the steps below and check out them.
  You must be logged on as administrator to perform these steps.
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the keyboard, and then double-click the device name.
  3. click on the tab power management and then check the option "allow this device to wake the computer".
  4. click on Ok.
  5 locate the touchpad and repeat step 2 and 3.

  See also: http://windows.microsoft.com/en-US/windows7/Solutions-to-common-power-problems

  You can also try to update the drivers for the keyboard and the touchpad.
  For more information: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support Engineer

• WRT54GP2 cascade successfully, but VOIP does not work via the LAN port

  Hello

  I searched a lot for a solution to my problem, but have found that it is really above my level of understanding. My apologies if this question has been answered before – if she, I can not find or understand.

  I have an existing wired network that is running on a Netgear WPN824v2. This configuration works perfectly.

  I want to add a Linksys WRT54GP2 to this network to act as a Wi - Fi hotspot and the VOIP connection point. I don't want to replace the Netgear with the Linksys, I want the different VOIP in a physical location access point. I would therefore like to them so cascading: Internet-> modem->-> Linksys Netgear. I do not want to bind the Netgear and Linksys Wireless, but instead, use a cable.

  I actually had this works almost perfectly, using the following parameters:

  NETGEAR IP 192.168.1.1 with wireless off

  Linksys IP 192.168.1.254 with disabled DHCP, active wireless.

  In this way, the Internet works, I can open a session the two routers and wireless of Linksys works very well.

  The problem is that VOIP will not work. I think it is because the connection between the two routers is: port LAN Netgear-> port of Linksys LAN.

  I understand VOIP tries to go through the Linksys WAN port, not the LAN port. If I connect LAN Netgear port-> Linksys WAN port, the phone works indeed but I can no longer connect to the Linksys, wireless router and unable to connect more.

  I would like to VOIP and the wireless work at the same time. Is there a way to get the VOIP by the Linksys LAN port instead of the WAN port? Or is there a way to make wireless and router connection work, if the Linksys is connected to the Netgear via its WAN port?

  Thanks in advance!

  -Jono

  When you wired your VOIP phone directly to the Netgear router you can in fact calls?

  If your Netgear router connect to the Linksys router to the WAN port, it will not work. As you already disable DHCP on your Linksys router and you will not have access to your Linksys router. This type of configuration has some other parameters.

  Connect the Netgear router to router Linksys on the WAN Port, then connect your computer to the router on the LAN Port Linksys. To connect to the Linksys router using default IP: 192.168.1.1 and change the LAN IP of the router Linksys 192.168.2.1 and DHCP must be activate and click on save settings. Once the parameters are now save your network power cycle and all your computers should be able to go online.

• Keyboard shortcut tab does not work on the first cc pro trial version.  Is this normal?

  Downloaded a trial version of the first cc pro on my new iMac 5 k.  Don't really know why I've bothered I'll get the full package anyway.  Thought I run and pop in some "dailies" to another project, everything worked fine until I tried to customize the keyboard shortcuts.  I press the tab and nothing happens.  Is it because it is a trial version?

  Sorry for the slow response.  Recently, I've been up to my eyeballs in work! (not a bad thing).  Ronin thanks for your help.  I had a quick glance at this link, and there are some useful things there.

  It turns out that I solved the problem otherwise.  All I had to do was clear my settings synchronized and then re-sync! can you believe that!  Now when I select shortcuts keyboard in the window menu opens and I can customize it further.  Before, nothing happened when I chose keyboard shortcuts in menu drop down!

  Maybe it's a weird solo bug that only happened to me, I hope that no one else suffers this infuriating thing!

  See you soon

• 4500 wireless: HP Solutions Center does not work since the upgrade to windows 10

  Hello

  My solution Center no longer works since I've upgraded to windows 10.

  Thank you

  Welcome to the HP community @DJHar,

  I understand that the Solution Center Software no longer works since you have upgraded to Windows 10, and I wanted to reach out for help. I would say firstly under the HP printer install wizard for Windows, that will find the drivers and software for your Officejet 4500 Wireless and install the correct software for Windows 10. Try the software for access later, and it should work.

  Let me know the results!

  Good luck