Newbie needs help with the new system specs!

Similar Questions

• I need help with the wireless system. One of my computers doesn't seem to get signal

  Hello, I installed Belkin F5D8235-4 router and im get the signal on one of my computers. On the other computer, it seems that im getting the signal, but it says unidentified network. When I try to open the internet it says is Interenet Explorer cannot display Web page. Do you think this could have to do with the card in my computer is not not compatible. I have an Atheros AR5007 802. 11 b / g WiFi adapt. IM thinking that if I buy a D-Link wireless G USB adapter, USB wireless adapter Compact of Linksys or a Belkin 54 G Wireless USB Adapter my computer may be able to get the signal. What can I do? Help please

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? With the help of WPA/WPA2 security? You put on the G and N or N
  only? A to G for this adapter connect the send.

  Your Atheros should be consistent - could be drivers.

  Actually try updating your driver and disabling the network logon. (To do this, use a wired connection or)
  Download drivers on another machine and transfer on removable media).

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your router wireless and wired - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Need help with the new graphics card

  So my trusty GTX 555 is finally dying after 4 years and 10 000 + hours so I looked in an upgrade and heard the GTX 960 would be a good upgrade for an Alienware x 51 R1. So I got a PNY GeForce GTX 960 Amazon and installed but when I turn on my system it passes to the BIOS screen and is there for about a minute and a half and it beeps every 30 seconds after the screen came. After the minute and a half or two then goes to a black screen and says the brand and model of graphics card in the upper left corner for about 5 seconds, then he sits on a black screen. I did something wrong?

  If necessary system specs:
  330W POWER SUPPLY
  Intel Core i7 2600
  8 GB RAM
  Windows 7

  Have you updated the BIOS?

• Need help with the time system

  I am trying to determine the time current system. It would be checked to determine if it is spent some time. (that is, the current time is after 15:00?) If so, the user would be prompted with a message saying if.) The system time would be verified only during a reset of the form.

  var now = new Date();

  The variable "now" be held next time current system.

• Newbie need help with the old graphics card Dell Dimension 2400

  Hi all

  Happy to discover this community and I hope I can get some answers here. Is there ANY video there card that would allow me to see the images that was shot in 1080 p on my old Dell Dimension 2400? Your help is very much appreciated here.

  Thank you.

  Nicolas

  Hi NICOLAS,.

  Motherboard Dell Dimension 2400 does not come with AGP slot or slot PCIex16. You will have to look out for PCI video cards, but most of the cards are low profile cards. You won't get a FHD 1080 p resolution.

• BlackBerry Smartphones need help with the new sim card

  I don't know why I have such a hard time finding how to do this. It's really making me feel like a * beep * here, so any help will be appreciated

  I'm on Sprint here in the United States and I'm on a trip to Romania in a few weeks and I wanted to have my phone all set up in advance. I bought a prepaid SIM Vodafone Romania, and told me that it is active and active international roaming. I tried it in 2 unlocked bolding my 9930 current and my old 9650. All I get is SOS and emergency calling only, both on AT & T or T-Mobile. I can't yet figure out how to get the phone number attached to the card. What's on the map with that he came are BPUK PIN and PUK. And I can't record with MyVodafone on their website without the phone number. I don't really know how to proceed. I was hoping to use SMS in roaming here until I leave.

  Thanks in advance...

  I was able to get the activated through e-mails with vodafone SIM. Just post here my solution in case anyone has the same problem.

• I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  I had to update my windows computer and you can no longer open Photoshop cs2.  trying to find help with this new system is not easy to use to put it kindly.  I downloaded the program and don't have the available key.  I tried to sign in but where.

  For Photoshop CS2 activation has been reprocessed, so your original drive and the serial number does not work.

  As an owner of CS2, Adobe has a copy without activation and serial number, to which you are entitled.

  The serial number is to the right of the download link for Windows. You'll need this one, not your old number.

  Get them here: download Acrobat 7 and CS2 products

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  I need help to the new photo of my photos from iphoto on El Capitan. Any help would be appreciated.

  To migrate your iPhoto library to Photos for Mac, drag it in the Photos icon in the Dock.  Photos will read the iPhoto library and create a new library of pictures of him.

  Is your photo library in iPhoto on an external drive? The migration will work that if the external hard drive Mac OS extended (journaled) file system.  If the library is on a disk with a different file system, Ministry of the environment of the library of a correctly formatted disk.

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• need help with the mac version of PES

  need help with the mac version of PES

  If you follow the 7 steps you can dl a trial via the links here: http://prodesigntools.com/tag/ddl

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

  p.s. If you need a more direct link, you must specify the exact version you want.

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?