-
Newbie question - using SLES 11 SP1 as a host
Hello. I got Workstation 8.0.4 working on SLES 11 (output of the command uname - r is 2.6.32.59 - 0.3 - default) but after a reboot (installed ESET NOD32 Antivirus), I got the following message when starting work stations:
Clicking OK annoys me this window:
WARNING: I am a windows guy tyring to learn Linux. I see other posts similar to this, but not directly related to the use of SLES 11.
Any help would be greatly appreciated as this is very frustrating
Thank you
Joe
Hi Joe
The error itself is misleading.
What you need to do is to install the package 'kernel-source' for your version.
This is possible by searching the kernel sources in yast2.
Just make sure that the version number (to the title of the installation / column available in yast) corresponds to the version number that is produced by your command uname - r.
In my case (test on a SLES 11 SP2 system)
uname - r = 3.0.13 - 0.27 - default
The version number of the package kernel-source = 3.0.13 - 0.27.1
Also ensure that the CCG and CCG-c++ packages are installed
Installation of the packages of yast seeking for them is the simplest method.
Once these 3 packages are installed, restart and restart workstation. It should work.
Otherwise, the location that you enter into the test area, you have published is as follows
usr
It worked when I tested it on SLES SP2
Concerning
Cyclooctane
-
Newbie question: using the pen tool
Hi, I drew a shape with the tool pen in Flash CS4. When I double click on the line, it highlights the whole shape, but I can not complete for some reason any. If I single click, that part of the line is highlighted (before he changes the angle). How can I get this line to connect as a form to invoke filling on it?
Thanks, Mike
This does not mean that having a closed shape. is there a visible gaps? (if you have a vision problem, you can use the magnifying glass tool.)
or post a screenshot of your sketch unselected.
-
Hardware blackBerry Smartphones Dumb newbie question! :)
Hi people,
I'm new in the world of the blackberry and I'm about to take the plunge with a unlocked sim-free BB Bold to use in the United Kingdom on Vodafone. I read on the differences of software between BIS and BES and would go for a set - up BIS. My dumb newbie question is equipment arrives in version BES or BIS or not?
Thanks in advance and do not hesitate to make fun of my madness
craigdh wrote:
Good answer Xandrex. However I'm still not clear as to the issue of equipment, I asked. The reason why I am wanting to buy "BOLD" a separate contract is.
1. it will work a little cheaper over the life of a contract.
2. I will get my "BOLD" much faster.
3 UK networks have a reputation for crippling features in high-end etc phones then charge you more to get similar functionality via one of their services.
4. they are very slow to provide updates of the firmware on their own brand of appliances.
There was a little insinuation in my answer: basically, you buy a mobile phone, so you get a BIS/BES contract with a carrier who takes in charge that the mobile phone. A "BOLD" can be used like BIS or BES, it depends on the company.
On the price, I'm sure the phone deal + contract is always cheaper than a "BOLD" (retail and not eBay from some guys) then a contract which is usable (that is, no GoDaddy or 0.01GBP / KB).
for the speed, you are the one who knows.
The thing of the cripping: the thing is, the updates are provided only by the suppliers (they get a barebone RIM OS, then add their stuff like facebook or AOL). Even if you buy a single "BOLD" without a contract, if you want to upgrade the regular way, you wait fot your carrier to publish the upgrade. Or you can do the regularly (which can be made with or without the purchase contract at the same time).
HTH
-
2 blackBerry Smartphones newbie questions: do I need it, and how I spoil my phone?
Sorry for the newbie questions:
My IT has already set up my phone to receive email from their Blackberry Enterprise Server.
(1) do I still need to install the desktop software? Given that I can transfer files via Bluetooth from my laptop and my contacts/calendar/notes are stored on the Exchange Server, is there any point?
(2) if I do not need to install it, given that my email is already working with BES, and the Office installation configures email settings, how do I keep the new Desktop install to mess up the current configuration of e-mail?
Of all the notes of support on the software, looks like more trouble whereas at this stage. I really need to treat it?
Thank you.
Janimal
Hi and welcome to the Forums!
Janimal wrote:
(1) do I still need to install the desktop software? Given that I can transfer files via Bluetooth from my laptop and my contacts/calendar/notes are stored on the Exchange Server, is there any point?
There is not much need of DTM, but it is convenient to update the OS of your BB. Sometimes there will be releases of minor bugs corrections and such to your BB - DTM will be meaningless and install them, while updating wireless could not detect them. For a major OS update, you want DTM, as it will do a backup/complete restoration of your BB, including configuration settings, and others so that you don't have to redo those. But, to your e-mail, calendar, contacts, etc. - you are right, it is useless given that your Exchange Server is actually your master with your BB being actually a backup of that (in a sense).
In addition, USB drivers (which are part of the package DTM) are necessary in order to charge your BB via your laptop USB. You can download and install all the USB drivers if this is the only part of the DTM you want.
Janimal wrote:
(2) if I do not need to install it, given that my email is already working with BES, and the Office installation configures email settings, how do I keep the new Desktop install to mess up the current configuration of e-mail?
When you install it, it will ask if you are in a company - say Yes and it will install properly. Installation when your PC is connected to your corporate network and your Outlook is open. Who will get the best and fastest configuration. When you install, do not let it select the functions of auto-launch... If you wish, attach your BB and manually run the DTM.
Of all the notes of support on the software, looks like more trouble whereas at this stage. I really need to treat it?
Thank you.
Janimal
Basically, on the whole, I vote 'YES'. You get the USB charging. You can save if you wish. You get the device OS and other updates. Most of the reported problems are people using it to synchronize via USB things - you won't do that because most of your stuff will be syncing via BES OTA. Other things, you can simply drag-and - drop (music, videos, etc.). .. .follow these instructions (use the latest 5.0 DTM):
http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&thread.ID=3...
DL the latest version here:
http://NA.BlackBerry.com/eng/services/desktop/
Good luck!
-
Newbie question - passing variables (aka why this work?)
I spent a few hours in vain trying to pass the value of a html text box to a coldfusion page 2nd via the URL (query string).
However, it seems that I can't do this because the 2nd page seems to be able to reference the value in box of text in any case. My question is: is this a coincidence, or is this the normal procedure, things work? When I click the "Run report" button, everything I typed in the text box appears on the screen of page2.cfm. I thought I should pass this value somehow (via the variables session or the URL string or something).
So my newbie question is: is this the way it should work (a simple answer Yes or no is fine)? A text from one box. CFM file can reference the value of text box on the other. CFM page? Thanks in advance
Here is the page 1 (page1.cfm):
<! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / BY" > ".
< html >
< body >
" < CFform action = ' http://www.mywebsite.com/page2.cfm "method ="get"> "
Cust ID: < cfinput type = "text" name = "CustomerID" >
< input type = value = "run report" >
< / CFFORM >
< / body >
< / html >
Page 2 (page2.cfm) here which works fine and shows what I typed in the text box:
< CFOUTPUT >
#CUSTID #.
< / CFOUTPUT >
I was already typing this until Ian replied. But I may as well post it in case it helps...
> I spent a few hours * in vain * trying to pass the
> value of a html to a coldfusion page 2nd text box via the
> URL (query string).
If you know that he or she is actually what you 're doing.
"> http://www.mywebsite.com/page2.cfm" method = "get" >
> Cust ID:
When you use method = "get", the form field, the variables are passed in the query string. So, if you enter "abc" in the text box, the URL submitted will be:
http://www.mywebsite.com/page2.cfm? CustID = abc
So 'CustomerID' will be available as a variable within the scope of the URL on page 2.
> * Here's page 2 (page2.cfm) which works fine and shows
> what I typed in the text box: *.
>
> #CUSTID #.
>
The reason for which he works is a little magic CF. The variable #custID # not be bounded, CF search this variable in a predefined list of staves (see link below). It looks in each of them, and uses the first value it finds. Although not the exact search order, CF will check the
http://livedocs.Adobe.com/ColdFusion/8/Variables_32.html
-VARIABLES in scope (at the time..)
-Reach URL (at the time..)
-FORM scope (at the time..)
... etc...
In your case, the variable exists in the scope of the URL. If your code is equivalent to saying
#url. CUSTOMERID #.
It is in fact a practice better coding. Although the original code works without the scope of variables, providing an explicit framework is more efficient and avoids unitentional errors. For example if the code on page 2:
#CUSTID #.
... the output may not be what you would expect ;-)
So to answer the question: Yes, that's what must happen. However, you must explicitly scope your variables page 2 IE use #url.custID #.
-
Flash/Dreamweaver newbie questions
Hello world. I'm a newbie, so please bear with me.
I'm building my first website in Dreamweaver, but I want to create the home page in Flash. When the user enters the site for the first time, the homepage will play a short animation of my logo, and then the navigation buttons appear at the end. The buttons will host on working capital. However, if the user returns to the Home Page of another page in the site, I don't want the introductory animation to play repeatedly; I want the user to see just the static state of the Home Page, but with all the current navigation buttons and active rollover behaviors.
So my questions are:
1. I thought to build this page in Flash CS3 as my index.html page and, at the end of the introductory animations, using ActionScript to make the browser jump to a page similar in appearance, but without the introductory animation and save this page as home.html. The whole House all site links would point to this second file html instead. This sounds like a good way to do this?
2. If this approach is reasonable, how could import Flash pages in Dreamweaver? For the index.html file, for example, I just name the file "index.fla" Flash and set the publishing settings to generate a file named html result?
(I must confess that I'm still not sure that understand how to integrate these two applications when you create web pages with Flash).
Thanks for all help!
Tom Tom,
> When the user enters the site for the first time, home
> page will play a short animation of my logo, then the
> navigation buttons appear at the end.
Food for thought: How do you incorporate a navigation of these
buttons in the rest of the site? You mentioned that only the home page
would focus on the Flash, if you plan to reproduce the functionality
(some of them, in any case... non-Flashy things) with HTML inside of
your site?
> if the user returns to the Home Page of another page in
> the site, I don't want the introductory animation to play through
> yet;
To do this, you will need to use a little ActionScript to determine if
or not, the user has already been to the home page. By coincidence, community
MX has just published a tutorial on this topic today:
http://www.communitymx.com/abstract.cfm?cid=124BC
(This is a subscription site, but this article is free).
I wrote this article, if you have any questions, do not hesitate to ask.
> So my questions are:
>
> 1. I was thinking about building this page in Flash CS3 as my index.html
> page and, at the end of initiation, using animations
> ActionScript to make the browser accesses a similar page, but
> without the animation of introduction and saving this page as home.html.
This could be a useful alternative approach, for sure.
> All the whole of home site links would point to this second
> html file instead. This sounds like a good way to do this?
Yes, it is certainly a good way to do, because this means that the animation
will play again for all those who visit your site after will disappear. The
Code suggested in my article is only about a "play it once" approach.
> 2. If this approach is sensible, how can import Flash pages
> in Dreamweaver?
From a technical point of view, Flash doesn't create pages, even if this can help
refer to the content Flash in this way. Dreamweaver is an HTML authoring tool
pages and Flash is a tool for creating multimedia content which is incorporated
in the HTML pages. Of course, you can create some Flash content that fills completely
a page, but you still have to deal with a "shell" HTML element
> For the index.html file, for example, would just name the Flash file
> "index.fla" and set the publishing settings to generate a consequence
> named html file?
Honestly, it doesn't matter what you call the Flash file. When it is
the Flash content will be a published SWF file, and you use Dreamweaver
to integrate your SWF (s) into your index.html file (and possibly your)
file index2.html or home.html and home2.html files).
Ideally, you should consider making your content available to as many
viewers as possible. This means that from the lowest common denominator
(HTML), then following the principle of "progressive enhancement" to improve the
the appearance of your site with CSS, then potentially JavaScript (for
those who have active JavaScript) or Flash (for people who have the)
Flash Player plugin installed), and so on.
If you Google SWFObject, you can find a freeware JavaScript solution for
Flash presentation for those who with the plugin installed (certainly, there
just wait that most people do) and for presenting "plain old HTML" to
people who do not.
David Stiller
Co-author, Foundation Flash CS3 for designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."
-
Activation problem occurs when I use Win7 via VMWare.
Hello guys,.
I use a Win7 Ultimate installed on my macbook through bootcamp. It is enabled and works well. However, the activation problem occurs when I use Win7 via VMWare. A solution that keeps popping up is to use the phone activation and wait for the representative of the other side to help.
I am currently in Cambodia, and they have not MSFT representatives here to answer. I'm calling them (the Singapore not. and the Viet Nam not.) with my Skype credits, but I am unable to connect.
Please advice!
Thanks in advance!
Original title: activation issues
Hello
I suggest you choose the near by countries and by calls to this phone number. If you do not have representatives MSFT, and then try another nearest selection of countries and calls for a number.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929
Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.
-
A LOT of Newbie Questions blackBerry smartphones. (Must be the easy answer!)
Good, please excuse my ignorance... guys xD
I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:
Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.
Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.
Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?
Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).
To buy another memory card: Where the best place to buy one of these mini memory cards? One of my friends like, a 24 a concert... and I currently have a 2 gig (who, I should mention, is more fricken memory I have in the computer I do not write about this time xD) how can I find out if the card is compatible with my camera?
WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?
Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?
Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?
Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD
Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?
Speaker?: How can I get speaker? xD
Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD
Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.
Thanks for looking, and I warned you... they have been the newbie questions! xD
-Darky Delacroix
Welcome to the SkippyTheWonder forums.
SkippyTheWonder wrote:
Good, please excuse my ignorance... guys xD
I just bought two s BlackBerry Curve 8530 from Sprint. I'm pretty tech savvy, but there are some things about this phone, I can just enter in two or three days I got em:
Deleting photos: Well, then I'm in my media folder, in the images. I selects a photo and press the BlackBerry button and select Delete. Then he said: it is read-only, and when I remove it, the icon is still there. I tried to turn on/off the device, and it's still there. Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared. I was also able to delete using the "BlackBerry" button and then "delete". It doesn't give me that read this option.
Saving images: So, for some reason I can't save more photos. I don't know even how I saved the first 12 photos I have taken... but now it won't save any more. What the hell happened? xD I have a 2GB card in my phone... surely these 12 images didn't fill in this card... Thought this one myself. I plugged it up to the Desktop Manager and all of a sudden all the photos I had taken appeared.
Buy ringtones: On my old phone LG, I used to buy ringtones RealTone Jukebox... where they had extracted from songs that I could download for a crazyhigh. Where can I buy the real music ringtones for BlackBerry? What I do myself?
There may be an icon on the home screen of your camera to buy ringtones. Or you can open the browser and go to http://mobile.blackberry.com. There is a link of ringtones that you can click
Media moving to my PC?: I went through the music store of Sprint comes with my camera, and two purchased songs. I want to know if I can get these songs out of my BlackBerry smart phone and my PC. Also, if anyone knows what format they are in (if they bought before Sprint music store).
It is recommended to buy a microSD card to store your multimedia files, if you run out of memory on your device.
Depending on what OS is your BlackBerry tells you what size you can buy a microSD card. You can check under Options | Topic (will appear as v4.xx.xxx). Look at the table on the following link to see what size you can get - http://www.blackberry.com/btsc/KB05461
On the BlackBerry, go to Options | Media Media Card recommended parameters are:
Media card support: WE
Encryption mode: NO
Mass storage support: WE
Auto enable mass storage Mode when connected: YES
Mass storage mode allows your BlackBerry to act as an extra drive when it is connected to your PC. It will appear as an extra drive letter in Windows Explorer. So you can just drag/release the multimedia files on your memory card
WTF @ Redlight?: From time to time (we can always do that, I'm not sure), the little red light at the top of my unit starts to blink even if I do not have a weak battery or not new messages. It first happened lastnight when a friend sent me 3 IMs at once. I had to reboot my device and I think that he is stopped. Earlier, it happened again (I had several new messages) and this time whenever my display is on, the light was red only flashes do not. It can always be like this now, but I'm not sure. My camera is in the other room and I'm too lazy to check xD. Why would he do that? How can I get him to stop?
Here is an article that describes the status of the LED
http://www.BlackBerry.com/BTSC/KB03897
If you want to disable the LED check this KB article
http://www.BlackBerry.com/BTSC/KB10721
Turn off the sound of the camera?: My camera makes the shutter of the camera, even when noise silence. Is there a way to stop this?
Check out this post
http://supportforums.BlackBerry.com/T5/BlackBerry-Pearl-BlackBerry-8100/turning-off-the-camera-Shutt...
Auto keyguard: I have EPIC hand-dial to people purse. In my view, it has a keyboard lock button in the dashboard of BlackBerry (that is the correct term for this?) But I want to get to the place where the keyboard auto-lock after a certain period of time. Is this possible? I saw somewhere about pressing the button mute will lock it... who is the top/center of the unit button?
Key blackBerry?: Well, don't laugh, I know that I'm retarded. But, the key to the left of the beach towel... than the devil who called? He got the BlackBerry logo on it... is what he called the BlackBerry button? I know, I know, I'm retarded and could probably flip through the manual to figure it out... but still. I might as well ask now xD
Called the menu button
Choose the icons to display on the main screen: When I added an e-mail address, he put an icon on my main desktop, in the row of icons at the bottom of the screen. (where is my background image and all that). Can we choose the icons that we want to display on the main screen? I have really now, my calendar icon that I know that I use. I'd love to move the keyboard lock button here though... is it possible?
If you select an icon, click the menu button and choose move. You can rearrange the icons. The icons in the top 5 on the list will be those along the boittom when not looking at the full home screen.
Speaker?: How can I get speaker? xD
Can try to hit the key ' $' as a shortcut to activate speaker. During a call, you can click the menu button and choose the speaker phone option in the menu
Theme Studio (software, no associated device): Anyone used this? It is quite easy to use? I am tech savvy, but I don't want to just download a ton of programs on my PC that I won't use xD I'm working on the Desktop Manager and it takes forever. I want to make themes, but I'm curious to know how easy to use this program is... graduate to use design or if it would take a graph xD
Not sure about that sorry.
Well, then, I think that... Think THAT that's all. I can change this highest position (if we are allowed to edit) to delimit what questions have been answered. I hope someone sees this soon enough, that I don't know how "living" these forums are.
Thanks for looking, and I warned you... they have been the newbie questions! xD
-Darky Delacroix
-
Questions using app mail using account MSN. Error: address msn is not available and will not be synchronized.
Original title: Questions using mail app
We got a new laptop in August 2013 and had accounts msn.com e-mail and yahoo on the mail app in windows 8. any fine until last Wednesday 1/10 when we now get message that the msn address is unavailable and it will not sync (or send test message) Yahoo account always fine and no problem on other devices - phone, i - pad & pc and no problems online via explore or google.
Any suggestions? also is there anyway to check the details of the e-mail on the mail application accounts?
Hello
Yes, you can uninstall and reinstall the application only after checking the links below to solve the problem.
What to do if you have problems with a soft
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
See also the links: http://windows.microsoft.com/en-ca/windows-8/setup-email-contacts-tutorial
http://Windows.Microsoft.com/en-CA/Windows-8/mail-app-tutorial
I hope this helps. Feel free to write us again for assistance and we will be happy to help you come.
Thank you
-
Newbie question - javascript - php HTML5 and HTTPS w
Hi all
Newbie question...
I'm having a problem with browsers, mac and javascript...
simple story:
1. If I put the test on site NO SSL folder - everything works ok
2 but if I put the same test on HTTPS site folder - MAC SAFARI gets / data displays ok but firefox MAC and Chrome don't receive data
Q: why not? How do I fix this so work all browsers?
---
CONFIGURE LIKE THIS...
Page1.html
Gets the data with this line...
What was...
$.get ('getdata.php', function (data, status) {})
... etc.
also tried this (absolute ref)...
$.get ('https://mysite.com/getdata.php', function (data, status) {})
... etc.
and displays the data on the same page page1.html
Safari for MAC = works but firefox and chrome do not display data HTTPS site but all work 3 over HTTPS no alternate test site. (using only this local demand = $.get ('getdata.php', function (data, status) {}))
BTW: if I manually go to getdata.php he gets php data and display the data in json package very well
Q: How can I test / solve this problem, so all 3 browsers work on HTTPS site?
Curious to know why MAC SAFARI OS 10.10.4 was an error?
There are differences in the way different browsers support SSL.
-
[Newbie question] How to find unused media?
Hello everyone, quick newbie question. How can I quickly find all media in my imported files that are currently not used in my project? I want to delete them from the project.
Thank you!
First, go to the Edit menu > remove unused.
Use with caution!
MtD
-
Newbie question - how to effectively check if photo is part of the selection
Hi all
Sorry for the newbie question, but I do not know how to solve, and I'm sure that there is a quick and easy answer to this:
My goal is to get all the 'stack heads' (photos with Position 1 in batteries) selection ('photos' below).
for I have, make photo in ipairs( photos )
local date = picture:getFormattedMetadata("Filename")
if Photo:getRawMetadata( "isInStackInFolder" ), then
- Photo is in a stack
local photoHeadOfStack = picture:getRawMetadata("topOfStackInFolderContainingPhoto")
local stackPos = picture:getRawMetadata( "stackPositionInFolder" ), - get the position in the stack
local photoHeadName = photoHeadOfStack:getFormattedMetadata("Filename")
app:logVerbose(' Photo nb ^ 1, name ^ 2 is in a stack with the position ^ 3 ', i, date, stackPos"")
if stackPos == 1 then
- photo is the master of the battery
stackTop[#stackTop+1] =photo
app:logVerbose(' picture ^ 1 is the top of the stack ^ 2 ', date, #stackTop)
-check if couple if it is correct
elseif photos. photoHeadOfStack then
app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") (Top of the stack already selected", date)
other
stackTop[#stackTop+1] =photoHeadOfStack
app:logVerbose(' picture ^ 1 is in a stack, but not over the top. ") Top of the stack ^ 2 - ^ 3 ", date, #stackTop, photoHeadName)
end
end
end
In the if structure in the center of the Position in the stack control, if the Position is not 1, I would check if the photo to the stack ("photoHeadOfStack'") is part of the 'pictures '. I tried 'elseif photos.photoHeadOfStack then' and ' elseif photos [photoHeadOfStack] then ' but it doesn't work-> This elseif is never true even if 'photoHeadOfStack' part of the 'photos'.
Any way to have this check done without checking the photos "manually"? (via e.g. a loop for)
I'm sure that Lua offers this, but I do not know how...
Thank you for your support!
--[[ This code creates "stackTops", an array of LrPhotos that are the
tops of all the stacks containing photos in the array
"photos". ]]
stackTopSet = {}
for _, photo in ipairs (photos) do
local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
if stackTop ~= nil then stackTopSet [stackTop] = true end
end
stackTops = {}
for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end
-
Newbie question: how to extend in unallocated disk in a VM XP?
Hi all:
This is a newbie question, but looking for answers only left confused me...
I have VM Fusion (v2.0.6) running on a MAC (OS X - Snow Leopard) with an XP VM. When the XP VM has been implemented, it has been implemented with 20 GB hard drive space. I used VM Ware Virtual Machine settings to increase the disk space of 50 GB. (I left the "pre-allocate disk space' and 'divide into 2 GB files' options unchecked.) I don't have any snapshots during execution/implementation.
However, my current XP VM flashing me alerts "low disk space" - I see only about 1 GB of free 20 GB (I don't see the 40 GB listed in 'My Computer'). When I use the Services of management of disk in XP, I see a disk 0 20 GB System Partition with 30 GB of unallocated space.
How can I extend the current Parition (System) in the space of 30 additional GB? And do I have I done this to begin with?
Thanks in advance!
Take a look at: resizing of the ramdisks with step by step Instructions
-
NFS Newbie question
Sorry for the newbie question.
I have a small test system I try to enable NFS on. Very low indeed. Basically just a little sin, the switch, the pc and esxi (3.5u4) box.
all devices are on the same subnet. ESX is single hosted to the switch. (I know, bad practice to use the interface of mgmt for storage, but just try to keep things simple for this)
I tried to create a second instance of vmkernel with a different ip address on the same subnet, but the GUI yelled at me. I tried to find a way to enable NFS on the existing management interface, but could not find a way to do it. I googled around and I saw that I need to create a vmkernel another example to enable NFS.
So the question is, is it possible to have a box unique esx hosted with NFS, mgmt and storage enabled without VLANing it? Am I missing something obvious?
Thank you
Chris
Yes it is possible as mgmt have already vmkernel, you could simply add network (same subnet) storage & you have not need to allow anything else on ESXi.
Just go to configuration-> storage-> add storage
vcbMC - 1.0.6 Beta
Lite vcbMC - 1.0.7
http://www.no-x.org