Newbie: type size <

Similar Questions

• Pavilion 15-ab121dx: 15 laptop HP Pavilion (15-ab121dx) w / AMD A10 8700 p - what are the speed/types/sizes of RAM supported?

  I bought a new laptop over the weekend (15-ab121dx - CPU AMD A - 10 p 8700, 6 GB of DDR3 RAM memory) and the sales associate could not tell me the max supported RAM.  I guess I could quickly find the info online, but was strangely wrong...  I searched HP and the Internet in general site but can't find what the maximum RAM allowed in this laptop.  I'm assuming that the laptop is so new, the information is just not there yet?    He came only installed with 6 GB or ram (SODIMM 1 is 4 GB and the 2nd SODIMM 2 GB) and I want to change to 16GB SODIMM (2x8GB) or 32 GB (2x16GB) SODIMM.   The problem is that I can't find the maximum supported memory, speed, memory type for my new machine.  One of the main reasons that I decided to go with this laptop is I read good things about the A10 AMD 8700 p and that it can work with RAM speeds up to 2133 mhz...  But before I buy the fast RAM, I want first of all to ensure that this speed of RAM will work in this laptop?  Please list the supported RAM types, size of RAM, RAM speeds for this laptop.   In addition, support DDR3L, DDR3, or both?    Thank you!

  Yes thank you, but the link you have sent (the model computer laptop 15-ab121dx on the HP site) was the first place I checked when I started searching for information on the laptop.    It not there no guide service or y at - it clues about the supported RAM configurations.   I knew that the price of the machine and the CPU is perhaps a little too good to be true.     ... Not extensible user is bad.  Looks like the laptop everything would need to be dismantled to even just replacing the hard drive and, to install or replace the motherboard of the laptop RAM must be removed!    I should have done more research.  But I guess even if I had, I wouldn't have found much (since having to place a post in a forum to know these basic things like access and type of RAM)...   I plan to return it.  Thanks for the quick responses to the post office - this was appreciated.

• Vista will not display description of the file on mouse over. File name, Type, size, and Date modified see the upward, but no description.

  Vista will not display description of the file on mouse over. When I mouse over, a pop-up window displays showing: file name, Type, size and Date of change, however, it does not show the description of the file.

  So, for example if I have 5 files on different types of screw - the description tells me that the size of the screws. IE. 1.5 mm or 1. 8 mm.

  Update: try to get the description of the file displayed messing around in the file properties, now out of 10 records, only 2 includes the name of the file in the mice on the pop-up window. So now what lack us, it's the file name and the Description file.
  Help, please...

  Description of the file in as long as this is not one of the available variables, which can be shown with ToolTips - but there are others who could easily serve the same purpose. Here are the options:

  Consulted
  Attributes
  Created
  DocAuthor
  DocComments
  DocSubject
  DocTitle
  Modified
  Name
  Size
  Type
  To write

  Here is an article on how to change what is shown. http://www.ghacks.net/2008/02/10/customize-windows-explorer-tooltips/ . It is to change the registry, make sure you so first back it up before doing anything so that you can recover in case you make a mistake (or do the right thing, but it does not work as expected). http://www.instant-registry-fixes.org/how-to-backup-windows-vista-registry/ .

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Zoom function disabled so can't enlarge the text on the main screen hard to read the subject lines of e-mail messages, looks like 6 pt type size, activated after the opening of e-mail.

  The text size is so low in the views of folders for primary e-mail that it is very difficult to read the subject lines of emails. I think I remember that earlier versions 'Zoom' has been activated and you could adjust the size. Looks like that the size is set at approximately 6 pt type. Must be at least 12 points. Thanks, C Sanders

  I thin you will find that it is this add-on you are looking for https://addons.mozilla.org/en-us/thunderbird/addon/theme-font-size-changer/

  Installation instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html

• How can I control type size during the generation of the legends of the links palette?

  Using my InDesign CS5 Classroom In A Book, when I ' generate static captions ", the captions appear fine, but they are point 12 type, rather than the modest 6-point type shown in the example in the book. I know that I can go into these blocks and change the size, but the example me to believe son type isn't supposed to get out that big. I'm doing something wrong, or the book just leave out the fact that the blocks must be changed manually? (For those who have the manual, I'm talking about "Add metadata captions to graphic blocks" at page 113). Thanks for any help you may be able to offer.

  Tom

  Just thought that he out - did not notice that I was not set the style for paragraph of "Photo Credit". Problem solved!

• How an I traditionally type size and makes that all the "BOLD" fonts?

  Need to bold and the size increase for typical print on computer screen.

  Go to control Panel\All Control Panel Items\Display. Try the other settings.

  Depending on what you have in mind, exactly what is too small, making the required adjustments can get a little, well, "fussy". Let us know.

• How to increase the size of type on 1 web page (Amazon)

  Each web page that I opened is the same type size, etc. EXCEPT a (Amazon), whose type is very small, it is unreadable.

  What can I do to solve the problem?

  Thank you
  Jim Yeary

  Have you brought to the top of the bar of the menus file, edit, view menus by holding down Alt (or Alt + V to open the view menu) or by pressing the F10 key?

  You can attach a screenshot of you toolbar in the Firefox user interface look?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

• What size, type and brand of SSHD fits and works well in the caddy in E6410?

  Hello

  I just got my laptop E6410 a caddy, who works with SATA drives. As I wish to expand my storage saying up to 1 TB with the caddy, I don't know what type, size, brand of SSHD 1 TB would fit into the caddy and work well in my laptop E6410?

  Suggestions are really appreciated.

  Concerning

  Endre

  It probably uses a 2.5 drive "-check with the provider of caddy."  It will certainly require a drive of 7 mm and can take a 9.5 mm as well.

  There are three manufacturers of drives - WD (HGST), Seagate (Samsung) and Toshiba.  They will all work.

• How can I know the actual size of the type in a document of intent 'web '?

  I'm designing a document for iPhone 6plus pixels (1334 x 750) and need to know how translates the size. For example, when I call a text 30 PT., in the real world on the iPhone it's something much smaller than this... maybe 12 pt. This has something to with the number of pixels in the canvas... but how to convert?

  So, how to calculate the actual size of the type? I'm not good at math, I need to be told how to do it.

  For the output and display at 100%, InDesign defines the physical size of a pixel as "1/72, so the relationship between the print type size and displayed size of the iPhone is a simple report. For the iPhone6 72/326 Gets the relative size of the print to display discount, and 326/72 would be a multiplier. So to display 12pt type how it would print, set it to 54.4 pt (12 x 4.53). Or, to view a 1 inch by 1 inch square, resize it 453%.

  For the iPhone6 more the multiplier is 401/72 or 5.57

  Apple - iPhone 6 - technical specifications

• Dimensions type large sizes to match the requirements of thumb.

  I recently had a customer who asked for a sign with 10 "lettering. I thought it would be easy, just using type size of 720 points. With the help of 720 actually produced about type height 6 ". To reach 10 "high registration required the police size in points to 1040 points. No idea why?

  Type size refers to the size of the slug type-based. Baseline will be located above the background of this slug, with descneders going below the base line and the caps and ascenders goes upward, but there are no rules or amounts set for how long the height total slugs will be used (and you can assume that there is always at least a certain clearance top and bottom to avoid collisions between the lines.

• Type by default too light and small

  After I've upgraded to the latest version of Firefox printing on most of the sites I visit have become almost unreadable because the text is so low. In the same case, I block the text to read. It is impossible to use the 'answer' or composition"in gmail (online) because the default type size is so small and light (grey? or light?). I literally go to a Notepad to compose my message, then the block and copy and finally paste it into the window of response. I played with the colors by default, etc, but nothing seems to fix. I even used the add-on of Restorer Classic theme and still no improvement...

  Does anyone else have this problem? What is the solution?

  Hello

  First of all, you have a possible Trovi infection, at least from what I've seen in your parameter "browser.newtab.url". Please visit:

  • http://malwaretips.com/blogs/trovi-removal/

  If you have already removed Firefox, then ignore everything I posted above.

  Can look you in your font settings for:

  • Tools (or

    

    ) > Options > content

  And make sure that the colors are set properly? You can also click on "Advanced" and try some of the options, make sure that you change the settings of 'Western', if you want to use the custom settings (unless you browse the sites of different languages and you want to change those too) n ' forget to uncheck "Allow pages to choose their own fonts, instead of my selections above" If you want to.

  Please see change fonts and colors Web sites use for more information.

• I want to sort of types of files in the finder

  In the finder, I am trying to edit my photo files.

  I need to separate RAW, RW2, NAVE and all other Raw to jpg files.

  I tried to organize by type, size and type, but none has separated the RAW to jpg.

  How can I do this with my Mac?

  Doug

  douglasfromsouthport wrote:

  In the finder, I am trying to edit my photo files.

  I need to separate RAW, RW2, NAVE and all other Raw to jpg files.

  I tried to organize by type, size and type, but none has separated the RAW to jpg.

  How can I do this with my Mac?

  Doug

  What are those file extensions such as jpg, gif, png, tiff?

• HP 9000dn size unexpected tray for tray 4

  OK let it try again.  I have two HP printers 9000dn lets call the Imprimante1 and imprimante2 (both have a tray 4 attached).  I have an error on imprimante2 (unexpected size tray) 41.3 associated with tray 4 and tried the following resolutions to know available fixing.  I try so here whether anyone can explain or give me an idea of what is wrong with it.

  (1) swapped Imprimante1 with imprimante2 so that TRAY 4 is now used by Imprimante1 and error still appear after a print job.

  (2) traded on RG5-6235-000CN to Imprimante1, imprimante2 still shows up, but on Printer1 I placed it in her and it prints fine.

  (3) replaced all the rolls

  (4) replace all paper size detection (RG5-6207-R)

  (5) Ran the sensor, autonomous, engine tests and cleared very well.

  Checked 6) I don't know how many times the type size and tray tray and are properly set on letter and plain in both Control Panel and on tray 4 screen.

  (7) imprimante2 default factory reset and set all settings back to normal operation and error appears.

  (8) printed several odd jobs and the error did not show pages (100-200), but when I run a print job 400 + the error will appear in the 100 pages or later version, which seems that the error appears randomly.

  (9) when I cancel the current print job when the error pops up and the second job starts, it prints fine, but because print jobs must be in order I didn't wait for the error appears again before canceling it.

  I am at a loss, and I think I might start just to Exchange parts of the tray tray 4 imprimante2 Imprimante1 4, but I'd rather not if I can help it.  Also think it may be a cable or something.

  obyIT, what do you mean by "we're going to try again? I discovered some information for you, this link (http://goo.gl/Km5yB) describes a method to resolve this error message.

  Alternatively, there is little more information available on this page too (http://goo.gl/EtCWR).

  Regarding connections, what type of cable you are using? What is a USB or Ethernet connection?

  I hope this helps, but I would like to know if not!

• I want to view the properties of folders of files and the size of the files used on the right by clicking on them and the properties of the workstation to see the disk space used. __

  I have trouble finding the disk space used by files and folders individually and when I try to know how much is consumed and free by right click on my computer.  This was easy in XP, but I can't get the answers I need to analyze which uses space, where and how.  What is happening with this?

  Hi NativeLegal Eagle,

  Usually, right-click on the file or folder and clicking the properties option will give the details of the file or folder. The details include, type, size, location, size of the file on the disc etc.

  Make a right click on my computer will not give the details of available disk space on the computer.

  If you want to know the amount of space consumed by a program, then it can be found in the Add/Remove Programs window.
  a. Click Start, click Run, type appwiz.cpl, and then click ok.
  b. in the list, we can find the total space used by individual program running on the computer.

  Note: If nothing is listed in the file properties window or a file, then provide us with more information, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• TYPE of file is editable VIDEO CD movie in FOLDER of FILES

  I used MYBO accounts v12 on another computer (Windows XP), saved the file on a USB 'stick'.dat, inserted 'stick' in my computer (Windows Vista) to Explore & found folder THAT VIDEO CD MOVIE TYPE has changed. Any ideas whether or how it can be changed to .dat file? Is it caused by the compatability of computers, versions of Windows or MYBO?

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show you how to reset the folder Windows Explorer view settings (which is what I think you wnnt), disable Automatic folder Type discovery and increase the view of the folder cache to have Vista do not forget the display, model settings of file type, size, or position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the three prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps in your situation.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.