Newly added validation loop lines

Similar Questions

• How to display a line newly added to a table.

  Hi friends,
  
  I use JDeveloper 11.1.1.5.0.
  
  I added an Add button in my jspx page. When clicking this button, I'm adding data in a table, which are already stored in the session.
  
  When do the refresh of the page, I want to show the data newly added as a line in the table.
  
  Please help me.
  
  Thank you
  
  $@M$

  You forgot to mark the good and useful response...

  your branding can help others find a solution to their problems of eaisly. ;)

• How to remove newly added line in table advanced

  Hello

  It comes to 12.1.3.

  I have a case of use with advanced table and the "Add Row" button.

  The user can add two lines (empty), field 2 (both part of PK, the two LOVs), then start filling, then realizes he added too many, because the TooManyObjectsException exception is thrown. What would be the 'Nice' way of having the last added row deleted, or some newly added lines to delete if a few lines have been added (before actually trying to commit). I mean how must reference any row that has been added and should be removed - this line do always not PK (PK because not even adjustable due to violation of PK if this makes sense). Is there a fun/easier way to do it? Would be great if someone could share a line or two...

  Thank you

  Anatoliy

  PS

  I have a delete button in a footer with action to fire the event as 'remove' in LICS, I like below, and copy the following code deletes the LAST record in the advanced table, not the one where the cursor is?

  If ("delete".equals (pageContext.getParameter (EVENT_PARAM)))
  {
  String rowRef = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  Line OARow = (OARow) am.findRowByRef (rowRef);
  Row.Remove ();
  }

  Asmirnov-Oracle wrote:

  Hello

  Yes, I actually try this approach too.

  Have what approach you tried? 1 or 2?

  If you try to follow the second approach, you can try this?

  OAViewObject srcAppvo = (OAViewObject)findViewObject("SrcAppVO1");
  if (srcAppvo != null) {
      RowSetIterator srcAppRowItr =
          srcAppvo.createRowSetIterator("srcAppRowItr");
  
      try {
          Row srcAppRow;
          srcAppRowItr.setRangeStart(0);
          srcAppRowItr.setRangeSize(srcAppvo.getFetchedRowCount());
          int recCnt = srcAppvo.getFetchedRowCount();
          while (srcAppRowItr.hasNext()) {
              srcAppRow =
                      srcAppRowItr.next();
              if (srcAppRow != null) {
                  if (srcAppRow.getAttribute("SelectFlag") != null &&
                      srcAppRow.getAttribute("SelectFlag").toString().equals("Y")) {
                      srcAppRow.remove();
                  }
              }
          }
      } finally {
          srcAppRowItr.closeRowSetIterator();
      }
  }
  

• How to get to the newly added line in the advanced table

  Hello
  
  I moved to table. In the table contain actions, add a line button. After adding the new line how to access the new line to the runtime so any solution.

  That's why I suggest you take a sequence of database and the following value whenever you create a new line. Many Oracle Applications follow this approach and I would highly recommend you to do the same thing.

  Concerning
  Sumit

• How to fill a column with numbers and maintain when adding or deleting lines?

  So far, I've discovered two ways to fill a column with the number:

  1. Enter '1' in a single cell, '2' in the one below, select both, and then use the yellow dot to drag down - it will do the rest.

  2 create a formula such as 'A2 + 1' and drag also.

  However, in both cases it will work if I manually this continues to do for each newly added line at the bottom. Now, that alone would not be that big of a problem if it wasn't for the fact that I'm working with a table where the lines can be added among other rows in the future.

  Having said that, could someone please tell me how to create a column with a number that will increase automatically? I mean - if I add a new line between line 56 and 57, I want the new line to have a '57"in it, and the" old 57 "would now be"58"and so on." " I don't want to drag the whole column, which can be hundreds if not more than a thousand lines.

  Try to put this in the cells in the column:

  = ROW()

  In the formula, you can add or subtract a number if necessary to get the starting number that you need.

  SG

• Newly added music will not play

  My rocket is pretty well loaded with music (no videos or pictures), and I keep on mixing random almost constantly. One day I realized that he y a few songs I've never heard, I went into my library on the device and checked each album. Some of them belong and when I tried to play them it just showed the title of the song and immediately jumped to the next track without ever playing the songs. I plugged my camera into my PC and deleted the faulty albums.

  After reloading them they would not play again, and any other music newly added won't play either. Please tell me that I don't have to erase my library and reformat this stupid thing.

  Jump across titles as it means that the music is in a format of the "rocket" don't play - like iTunes'.m4a or .aac files. You will have to convert to .mp3.  You can do it with iTunes.

• How to create the default user interface is newly added to the columns in the table

  I added the new columns to the database table existed who got the default values for the user interface to the columns existed.

  How to create the default UI for the new columns.

  I couldn't see the newly added columns change the default UI (object browser-> database-> default UI - Edit-> Table).

  Using APEX 5.0.3

  Can you please help.

  Thank you.

  Find the option "Synchronize with database" under tasks on the interface's default user - Edit

• Newly added column is reflected only not in interactive report.

  Hello
  

  
  

  I created a report of iteration by using the APEX Wizard, later I changed the table of database of IR to have a new column to capture other data. Now I want to show the newly added column in IR to achieve this, I modified the region of origin (that is, the SQL query) of the IR newly added column is not automatically get reflected in IR, but when I run the page.

  Can someone help me .

  
  

  
  

  Thank you
  

  Hello

  It is here:

  

  concerning

  J

• I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  I'm trying to change my slideshow, and the 'Parts' section is grayed out so I can't change the captions on my newly added slides.  How can I change the captions?

  Hello

  In slideshow options, please enable 'Show lightbox parts while editing', under the editing section.

  Thank you

  Sanjit

• Look at a newly added staorage in ESX 3.5

  Hi all

  I need help regarding the following:

  Evironment:

  HP Proliant DL380 G5

  8x146GB the SAS RAID5 (internal)

  18 GB memory

  RAID P400 512 MB with BBWC controller

  2 x quad-core 2.7ghz processor

  Foundation of the VMware Infrastructure (ESX Server 3.5), NO VirtualCenter Server

  NO SAN, only local drives

  I just added two additional drives and successfully completed a table "expand" using HP ACU.  The ACU presents the new space at the Logicaldrive 1. Successfully, I expanded the ability of the Logicaldrive 1 of 539 Go Go 839. By using the VI client current storage capacity shows still 539GB. I use vmkfstools to expand the capacity of current storage in ESX or how about the newly added staorage ESX.  I have all of the options available by selecting Add storage in the VI client.

  Please see the attached screenshot for more information.

  All advice appreciated.

  Thank you

  Do not forget to leave points for useful messages / correct.

  -KjB

  VMware vExpert

• Newly added partition consume perceivable space in the tablespace

  Hello
  
  I added a new partition to an already existing partitioned table. This table has been partitioned by composite that is range and hash partitioning. After you add the new partition, I checked the relevant tablespaces and I realized that the % of each relevant tablespace has been increased to a few percent (8% to 10%) and in terms of size of 1 GB of space total was consumed/occupied by this newly added partition.
  
  My question is that is - this normal? If this isn't the case, then what could be the problem occurred? The important thing is that I completely did the same on the other two instances of the same database running on two different machines, and here I do not see a significant consumption of space in the relevant tablespaces only 0.01% space was occupied it.
  
  I would be grateful to the subject to help in this problem.
  
  Arshad.

  Hello

  FIPCA_RESULTS_PART0X tablespace size is close to 6500 M.
  The size of each partition is then 64 to create time.
  This means that each partition would almost 64/6500 * 100 = 1%

  That's why since it's composite partitioning know not how many partition you add both. If you add a partition 4 at the same time, there is a 4% increase in the use of space.
  It was only for the segment of the table. If you also have indexes on these tables then they would also occupy little space and I guess it would be 4% again so you see a 8% increase whenever a partition is created.

  If you do not see the same phenomena of another tablespace means one or both
  (1) storage spaces are very huge (since you're calculating percentage)
  (2) the initial and next extent of this table is less than what it is in this database.

  Concerning
  Anurag

• Not see the newly added line

  I want to at the time of execution after emptyrowset() object in view.
  and add the new row to view the subject adding values to new row object.
  
  I checked all values already added to the new line.
  
  but in adf set table does not see the new line.
  
  below is the code of my
  
  BindingContext, bc is BindingContext.getCurrent ();
  Japp JUApplication =
  (JUApplication) bc.getCurrentBindingsEntry () .get ("AMDataControl");
  Am = AMImpl
  (AMImpl) japp.getApplicationModule ();
  
  CCBSViewObjectImpl = voDetailsVO
  Am.getDetailsVO ();
  
  voDetailsVO. executeEmptyRowSet().
  
  NewRow row = voDetailsVO.createRow ();
  newRow.setNewRowState (Row.STATUS_INITIALIZED);
  newRow.setAttribute ("Id", next_seq);
  newRow.setAttribute ("No" "3569");
  newRow.setAttribute ("Time", "15");
  newRow.setAttribute ("Agent", "Manon");
  newRow.setAttribute ("Type", "SA");
  newRow.setAttribute ("Status", "VF");
  newRow.setAttribute ("BackType", "N");
  newRow.setAttribute ("notes", "NOT CLEAR");
  newRow.setAttribute ("UpTime", new Date());
  newRow.setAttribute ("ResolvedTime", new Date());
  voLastCallDetailsVO.setCurrentRow (newRow);

  Hello

  did you missed the line:

  After you have defined all attributes

  vo.insertRow (newROw)+.

• How to set a Total sum only for the newly added lines

  Hi Experts,

  JDeveloper 12.1.3.0.0

  Hi I have a table and above, I have an Add button. During the click on Add I only show new lines using CreateWithParams.

  Existing or rescued lines that I went under certain conditions as false. So, how can I calculate the sum of the salary only for new lines and display it in the column Footer.

  Thank you

  Roy

  One approach would be to browse all lines and sum of lines in the getter for the variable 'total '.

  http://adfcodebits.blogspot.com/2010/04/bit-4-iterating-view-object-using.html

  Dario

• Validation of line in a table

  Hello

  Can someone help me please

  On the form of tables when the user clicks on several add lines. and enter the same values on all lines.

  system must by a validation error when they click on the "submit" button.

  Apex. Oracle.com

  w/u/p: nani5048/test/test1

  • Request 92603
  • Page 7

  Thank you

  Nani

  Here's a thread to learn ORACLE APEX

  Learn Oracle APEX

  in any case, I added a unique validation date in your application in your workspace

  see for yourself

• AS3/Fx3, if no 'save' between several lines added, all the lines contain the last modified value.

  Hi all

  I'm a sucker for creating problems. I'm working on adding role and content to a client website management. Currently, I have problems with the management of the role page.

  It is a legacy application and the customer is unwilling to upgrade to Coldfusion 8 and Flex Builder 3 Professional, so 'use the new stuff' is not enough for a response. No, I did not select the colors and I don't have the power to change their .

  It is a populous example:

  

  Here's the situation:

  1. The management of roles (mxml) page receives its data from a pair of files xml, siteManagement.xml, and roleManagement.xml through cffile calls via a cfc
  2. The xml data is stored locally in vars XML until the clerk.
  3. If I click once on the button 'Add', change the 'Save Changes' and fields immediately (the changes to the file through cfc is validated), everything works as expected, except that resets the combobox of roles. This normally isn't a problem - it is often exactly the behavior you want, but I can't stop reset.
  4. If I click on "Add control" more than once between save changes, changin any field on a new line causes all other lines have the same value for the same domain. (problem 2)
     1. This behavior can be fixed by saving and reloading the xml data between each click on 'add a control '. the problem with this solution is that it clears the Combobox of roles, adding unnecessary clicks to add (sometimes several) controls for the datagrid control.

  Controls are added by adding a new child element var XML:

  private function btnAddControl_click (): void

  {

  var tempXML:XML = new XML;

  tempXML = controlXMLTemplate;

  If (ensureFileExistsForRole ())

  {

  rolesXML.role [cbRolePicker.selectedIndex] .filename. (@fileName == cbChosenFile.selectedLabel).controls.appendChild (tempXML);

  }

  on the other

  {

  Alert.Show ("something does not work...", "Error Control adding :");)

  }

  dgcControlLabel.editable = true;

  dgcControlID.editable = true;

  dgcControlType.editable = true

  updateControls();

  supposed selects new line - this isn't

  dgControls.selectedIndex = rolesXML.role [cbRolePicker.selectedIndex] .filename. (@fileName == cbChosenFile.selectedLabel).controls.control.length ();        xmlDisplay.text = rolesXML;

  saveRoles();

  where controlXMLTemplate is:

  < control controlID = "Control ID' controlLabel ="Label control"controlType ="type"editable ="false"visible ="false"/ >

  and is added to the filename element:

  < canAccess filename = "true" fileName = "" friendlyName = "" > "

  < controls >

  < / controls >

  < / name of the file >

  I don't know what is causing the problem with the datagrid control where a line edit causes changes in others. My first thought was that it is caused by all the changes and selections via xml calls for example;

  dgControls.dataProvider = rolesXML.role [cbRolePicker.selectedIndex] .filename. (@fileName == cbChosenFile.selectedLabel).controls.control;

  So I added the code to add a number to the values that feed the datafields hoping that have unique data would cure the problem. There can be no.

  It's the function/code that causes the role Combobox to reset but prevents the datagrid problem:

  private function loadSiteInfo (): void

  {

  cursorManager.setBusyCursor ();

  roleManager.RO.loadSiteData.addEventListener (ResultEvent.RESULT, loadSiteData_resultsHandler);

  roleManager.RO.loadSiteData ();

  }

  private void loadRoles_resultsHandler(re:ResultEvent):void

  {

  cursorManager.removeBusyCursor ();

  roleManager.RO.loadRoles.removeEventListener (ResultEvent.RESULT, loadRoles_resultsHandler);

  rolesXML = re.result in XML format;

  }

  I don't know how much information you need to help. I can post the code if necessary, but I have to be careful - it's something health.

  This line is suspect:

  tempXML = controlXMLTemplate;

  This means that you may re-use of the same instance for multiple lines.  Probably, you need to copy the template rather than just use it.