Newly built pc works well but programs take up to hours open!

Similar Questions

• VPN client works well, but I am not able to open the desktop remotely

  Hi all

  I configured a router 877 with features of firewall and VPN and DDNS, when the user connects his WAN pc via VPN all works well (mail, telnet, ping, LAN access) but the Remote Desktop feature is not available. I traced with wireshark and saw that the request to port 3389 was correctly sent to the destination server, but the response to the VPN client has been abandoned by the router... and I have no idea how to solve this problem.

  Can someone help me...? Thank you very much.

  Ilaria.

  In room router attached.

  Your problem is the NAT-config. First of all, the next line is not necessary that RDP does not have UDP ober:

  IP nat inside source static udp 192.168.10.136 3389 3389 Dialer0 interface

  Then, the following command causes problems:

  IP nat inside source static tcp 192.168.10.136 3389 3389 Dialer0 interface

  With which the router assumes that the server 192.168.10.136 must always be reached through the IP address of dialer0 and made a translation.

  There are two ways to solve the problem, but they all have some disadvantages...

  (1) only access the server through VPN. For that you can just remove the NAT statement above (the one with tcp) and you should be able to reach the server via VPN.

  (2) restrict the NAT for not doing a translation if a VPN-peer's access to the server.

  To do this, you must attach a roadmap to the NAT statement. But who does not work with the "interface" - keyword in the NAT Statement. But you can use it if you get a fixed IP address from your provider.

  (3) assign a second IP address to the RDP server. The period of the original INVESTIGATION that is used in the NAT statement is used to access the server without VPN, the second IP address is used to access the server through VPN.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP

• I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  This error message you see?

• My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  Hi Pedro,

  Make sure that when you design the phone and tablet version to keep in mind the limits of dimensions.

  Please share the url of your site for further analysis.

  Kind regards

  Akshay

• I installed lr6 & photoshop cc & these two apps are not in features & pannel - control program. both work well, but I want to uninstall cc photoshop, how do I do

  I installed photoshop cc & lr6 in win 7 64 bit.
  These two applications work well & are not in features & pannel - control program.
  How to uninstall photoshop cc if it is not in the pfogram list & features?

  Try tool Adobe Cleaner running:

  Locate the Photoshop option and remove it.

  Do not select clean all the option, it will remove all Adobe applications

  https://helpx.Adobe.com/content/help/en/creative-cloud/KB/CC-cleaner-tool-installation-Pro d/_jcr_content/hand-Sea/support_section_0/section-Sea/section_content/section-content t-main/filter_content/section-content-main/procedure/proc_par/step_5/step_par/download/wire e.res/AdobeCreativeCloudCleanerTool.zip

• TC and AE cable network works well, but some settings seem odd

  I was stumped by this for some time.  Despite the fact that everything works well, a setting on my TC seems inconsistent with what would be expected.  Here is a summary of my network:

  1 modem of the IAF was WIFI and DHCP active off the COAST, and it connects to the TC with ethernet.  The IP address is 192.168.1.1.

  2 TC reportedly made all DHCP and NAT functions and peripheral PSI is simply a relay for the incoming connection to broadband.  IP address is 192.168.1.2, ethernet and it is connected using static.

  3 AE network extends the network.  IP address is 192.168.1.3, ethernet, connected using static.

  4 Apple TV 4 does its thing.  192.168.1.4, ethernet static IP address.

  5. I have DHCP reservations for Beach 192.168.1.2 - 192.168.1.10 for these devices, as well as the rest - iMac and MacBook Pro, ethernet, static.

  6 DHCP set temperature 192.168.1.11 to 192.168.1.200 for mobile devices.

  The TC acts as the hub for all the rest and that is why he would hold DHCP and NAT functions, these are disabled on device of the ISP.  However, for my life, I can't not DHCP and NAT to work as router Mode.  DHCP is the only one that works.  I certainly do not have an IP given by the ISP, and there is nothing to indicate that it performs NAT functions.  If I try to change the DHCPand NAT router Mode, I get errors that there is a conflict and that the range is incorrect.  Conflicts of DHCP-range for the base station WAN address.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  Any suggestions are appreciated.

  DHCP not seems to work very well, but my question is which device running NAT if the TC disobeys.

  NAT is handled by the device of the ISP that you call the 'modem'... but this is very probably a device modem/router or gateway... that despite what you think, does not as a simple modem.

  If it were, it must provide a public IP address of the time Capsule and instead provides a private IP address (192.168.1.2) of the time Capsule.

  A public IP address cannot start with 192.x, 172.x or 10.x

  When you have your modem/router configured properly as a simple modem... then... you will be able to configure the time Capsule as the main router to your network using the DHCP and NAT correct setting, without seeing errors like Double NAT or incompatible IP address range.

  Some modems/routers and gateways can be configured to operate as a simple modem, and some may not. If your modem/router provided by your ISP, you may need to check with them to see if the device can be configured to operate as a mode modem simple bridge, providing a public IP address unique to the time Capsule.

  Moreover, when the Capsule is configured as a router, the default IP address range that he uses is 10.0.1.x.  The Capsule will be 10.0.1.1 on the LAN and devices will be at 10.0.1.x.

• W8 works well, but keeps asking me to activate (already done) - but then won't let me activate

  Windows 8 active and still works fine, but the activation window continues to appear, but will not let me turn it back on. computer works fine, but when I first starts it or when the monitor comes back from his sleep, upward the activation window appears. When I click Activate, it says that it cannot do at the moment. I have then to clear the screen and continue the calculation until next time. How can I fix it?

  Try the phone activation:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Hello. I installed the trial versions of 2014 CC Photoshop and Lightroom 5.6 (ie the plan of photography) on a desktop computer that I've added a new drive in Windows 7. Everything works well, BUT it's an old computer, and I think he could pack up unexpe

  Hello. I installed the trial versions of 2014 CC Photoshop and Lightroom 5.6 (ie the plan of photography) on a desktop computer that I've added a new drive in Windows 7. Everything works fine BUT it's an old computer and I think he could pack up unexpectedly. These things are happening. I want to sign up for the plan of photography but I also a Windows Vista laptop, and it's old too so I can put apps on a new office and a new laptop computer, after you have already installed on my desktop. That is why three activations. Am I allowed to do? See you soon. Paul

  You can't have three activations. It is simply not possible technically. If and when the time comes, just disable you / disconnect is on one of the old systems and install it on the new. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and resist it.

  Mylenium

• Application works well but IBOTS fails with unresolved table nqserror:27004

  Hello
  
  We have a clustered environment and when we run applications through he answers works fine but
  When the same application is run by Ibots we get the NqsError: 27004
  
  We as administrator in both cases, the pointers would be much appreciated.
  
  Thank you

  Check the authorization of your webcatalogs... chances are that records catalog for users are not picking up the correct authorization...
  Read article sawrepa and also refer to this id of metalink:
  BUG 8316638

• I created 'language bar' for 5 languages. All 4 works well, but "Korean" does not work when selected. My system is windows 7 ultimate.

  I use a few different languages in communication with others.

  So I implemented 'language bar' on my new windows 7, just like I used to do it on windows xp.
  I followed through all the suggestions to make trouble, but it still does not work.
  "Korean" does not work when selected.  He types English instead of Korean.
  Maybe "Korean" was not installed.
  Is it possible to make my language bar works correctly?

  Hi John Kim_775,.

  Please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• can't get photos to share facebok, email etc. Worked well but tried today and will not share ffrom photo app.

  Not able to share your photos of Photo on Facebook, email, etc. Was working fine until yesterday. Tried to share more older photos to Facebook and e-mail but I just an error message. All the photos are in the same format so ideas?

  I tried a few different things, but ended up talking to a Microsoft guy named Mathew. He was extremely helpful and patient, and after the download of many updates (67), the system seems to work very well. I don't know what the cause was but will present Bravo to Mathew to support tech Surface for its helpfulness and professionalism.

• ImageClass MF4350d. printer works well, but the scanner does not work.

  Canon Toolbox4.9 cannot connect it. Each time, I followed the instructions and put back driver and Toolbox (in the process, I have to restart my computer twice), it works for a while. But when I restart my computer once more, no link once again, and I need to uninstall and install all driver and toolbox4.9 again to make it work temperarily.

  I use windows 10.

  Thank you

  This simple fix I found online worked for me:

  Start > in the Run dialog box type. Services.msc

  Scroll down to Windows Image Acquisition (WIA)

  Right click, select Properties

  Verify that the startup type is set to automatic

  Click the journal tab of

  Make sure that Local System account and allow service to interact with desktop is activated. Hit apply.

  Click on recovery... Click on the window next to the first failure, scroll to restart the Service. Hit apply.

  As a MF Toolbox work and stay working even after a reboot. Only problem is Windows Fax Scan no longer works, but I can't use MF Toolbox.

  I hope that helps!