NI Vision run-time license

Similar Questions

• Vision Development Module run-time license?

  Hello everyone, I want to install an application to the University, I built on a laptop computer for use at another University. The application uses the driver NOR-IMAQdx for acquiring 2 USB, as well as various screw cameras since the vision development module. I know that there is no legal issue with Labview Run Time of distribution engine, but I would like to know where I stand with the side of the vision of the things. To install this application on the laptop I need to purchase the Vision Development Module Run Time License and software Acquisition of Vision for this laptop, if yes, how could I inculde it in installation? I noticed that the GUI installation gives me the possibility to include engines of execution and drivers, but I don't know how it works without the permit? Also, any idea on the cost? Any advice would be great, best regards, Joe

  Hey Joe,

  First the license covers the Module's development of Vision so should cover all the required drivers.

  You can download the runtime separately from here:

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav:, n8:13, ssnav:sup.

  You will need the license to activate it on the installation.

  Whether if it is a better idea completely, it depends on how you want to distribute your application.

  I hope this helps!

• License OR VISION Run-Time Engine

  Hello

  I send you this question because despite the number of doc that I could find in relation to my question, I have not had a clear answer to my pb:

  I have an application that has been developed with LV 8.2.1 using NI IMAQ 3.7 from functions. (Very briefly the program acquires images from a camera, performs simple operations on images and saves the results of these operations, so other images).

  I would like to know what are the licenses I need to purchase pour installer of the compiled version of my prog on client pc (which does not have LV). (I know I'll have to buy for each client PC licensed IMAQ 3.7 but regarding the treatment of these images can I just no VISION Run - Time Engine 8.2.1 which seems to me is free in the same way that NEITHER LABVIEW Run-Time Engine 8.2.1)

  Pour your response thanks in advance that I help him nothing I hope to see more clearly between the IMAQ vision, vision performance, VISA Run-time...

  Normal 0 21 false false false FR X-NONE X-NONE MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Tableau Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Hello fabrice91,

  The Runtime of NOR-VISION is available to download for free, however during the installation you have to activate it. When you create an executable LabVIEW AAFC is not automatically run time engine, this is why you need to create an installer that will contain the TENS of LabVIEW and NI of VISION. If you run the executable on the development computer it is normal that your application turns car you have all the necessary Runtime on this post. However if you try to run your application on a machine where there is no software OR your executable will not have to work and that's your Installer. Pour the know National Instruments programs installed on a PC you have several opportunities either through Measurement & Automation Explorer either start > Control Panel > Add/Remove Programs > software from National Instruments.

• LabVIEW RT and VeriStand run-time license

  Hello

  There is something, I want to clarify.

  VeriStand full development license includes a license to run LabVIEW RT?

  For example, if I intend to run on a desktop PC VeriStand became a target of RT, (as usual) should I buy a license of execution for LabVIEW RT or the run-time license is already included in the package VeriStand?

  I think we need to buy a license of execution in all cases, do you confirm?

  Thanks for your reply, have a good day.

  Kind regards

  After talking with the right people, I can confirm that the licenses Full Dev and operator agree indeed licensed LV RT Runtime (one per license NIVS). The license PC Dev has however not.

  Pardon confusion Da Helmut.

• NI Vision Run - Time Engine (incompatible with already installed products)

  Hi people - I created an installer for a simple application using LabVIEW and Vision 2010 SP1 64-bit.  The application works fine in Win7/64-bit OS development environment.  Failed to install on another computer with the same operating system, which gives the following message is displayed.

  

  The additional setup only I checked is the Vision Run-time Engine 2010 SP1.  I've completely updated all my products OR with the last set level DVD, which is for 32-bit products.  I can send the LLB from the source code if someone from NI Vision support staff needs this.

  Help!

  Thank you

  Don

  In prior OR components unistalling and then put it back, we have able to install this application.

  NOR can give a message more informative than the screenshot, I showed, as try uninstalling some components OR already residing on the machine, so we know where to start.

  Thank you

  Don

• I am too blind to find the download of the SP1 2015 Vision Development Module Run-Time?

  Research on ni.com for 'Vision Development Module Run-Time 2015' brings me to a lot of results, but not "Vision Development Module Run - Time 2015 SP1".  Is this product late?

  The Vision Development Module 2015 SP1 has already been published a few days ago.

  Hello Guenter

  I could not find, too and study this.

  As a solution for the moment, you can use the

  Vision Development Module 2015 SP1 - National Instruments
  http://www.NI.com/download/vision-development-module-2015-SP1/5798/en/

  and when asked to choose what features must be installed uncheck everything except the TERM NI Vision 2015 SP1, see the attached picture.

  Best regards

  Kathrin

  Certified LabVIEW Developer (CLD)

• VI LabVIEW Report Generation Toolkit elements in a TestStand sequence does not work with a LabVIEW 8.5 run-time engine

  Hi all

  I'm using LabVIEW 8.5.1 and TestStand 4.1. I did a sequence TestStand with a VI in this document, which uses items Report Generation Toolkit. On my machine I use LabVIEW and TestStand development system license. On another machine I use TestStand with basic deployment license and I chose the LabVIEW 8.5 run-time engine in the Configuration of the adapter. Everything works well except this VI with elements of Report Generation Toolkit. The error message shows that the VI is not executable. It works well only after I installed with a trial license and selected LabVIEW LabVIEW 8.5 development system in the Configuration of the adapter.

  I found other posts and a document in the knowledge base with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9BD7B1986256F62006AD402?OpenDocument but I am not no EXE files in my sequence, so I do not know how to fix mine. Someone has an idea?

  
  

• LabVIEW 2011 Run time engine installation issue

  I try to install Labview 2011 Run time engine as downloaded here: http://joule.ni.com/nidu/cds/view/p/id/2534/lang/en

  on my laptop Windows 7 Pro. I have the hard drive shared in the C and D drive with plenty of space on each.

  Initially the office IT guy tried to do the installation as an administrator and for some reason any installed at "D:\Program NIUninstaller Instruments\" for some reason any. He went through the installation without error, but after restarting, it seems that some of the components are installed. I never installed anything else OR on this computer, but after installation I see NI License Manager and Datasocket under National Instruments in the start menu. If I re - run the installer it seems to think that everything is installed and there is something to remove, but it is obviously not.

  Subsequently the computer gave me administrative privileges on my account so I have been playing with various combinations of uninstall and reinstall myself but with the same result each time.

  Any ideas would be very appreciated.

  Hi Robert,.

  you have installed the RunTimeEngine.

  What else you expect to see in your Start menu after doing? What's missing?

• Creating a single setup program, including the DSC Run-Time module

  Hello

  I would like to know if it is possible to add the DSC run-time of an installer?

  I'm using LabVIEW and DSC 8.6 and I do not have the license for the DSC run-time.

  In the "Additional installers", I checked the health empty boxes:

  • OR Distributed System Manager
  • NEITHER deployment DSC increased support for LabVIEW 8.6
  • OR LabVIEW Run-Time Engine
  • NEITHER Measurement & Automation Explorer 4.5
  • Engine OR Variable

  When I open MAX after the installation, I do not see the database of the Citadel, and there is no trace of the execution from DSC module.

  How can I have a single installer that will do the work?

  Thanks in advance

  Hello

  Yes, as long as your customer has performance DSC system installed and enabled on their computer, they should be able to use your exe with Setup included. Then you wouldn't need an installer for it because it would be already installed and the computer should have MAX and the database of the Citadel. You will not be able to install the RTS as an extra Installer, unless you activate it on your machine. I hope this helps.

• After restoring the system, I get the error message "Hasp SRM run-time environment (H0033)" during the installation of the software that I downloaded.

  Original title: software download

  I did a restore on my laptop and had to re - install software.   He downloaded without problem, but now it doesn't let me open - error message is 'Hasp SRM run-time environment (H0033) can anyone tell me what it is and how to fix it.   I already ran a "solution" to the problem and it did not help.   This software has no problems prior to the restoration.

  Hello

  This error occurs when the 'HASP License Manager"service no longer works correctly, stopped or not allowed in your environment. Before you continue with the troubleshooting steps, I would like to know some information about this problem.

  1. what security software is installed on your computer?

  2 What problem confined to a specific software or with any other software?

  3. are you referring to the resolution of problems by running to solve the problem?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Make sure that the HASP License Manager Service is started. Try the following steps to check whether the service is started or not.

  a. press Windows + R keys, type Services.msc and press enter.

  b. Locate the Hasp License Managerservice.

  c. double-click the 'Hasp License Manager' service and check if the Start button is grayed out or not.

  d. If the Start button is gray, then click the Start button to start the service.

  e. click on apply then Ok to save the changes.

  Method 2:

  If you use a security software and firewall on your computer, then try turning it off temporarily and check if the problem persists.

  Note: Antivirus/firewall software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus/firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please reply with the status of the issue so that we can better help you.

• Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

  Hello world!

  I don't know how, but I have a problem when my windows Vista from (running)
  The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
  I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

  And another question...
  There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

  It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
  Thanks for the replies, nd sorry about my English :-) skills
  Best wishes from the Bulgaria and have a nice day!

  Post edited by: me

  null

  Hello

  I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

  Kody is good. Reinstall the VAP and check if this helps solve this problem.

  With regard to the question of the other;
  You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
  However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

  You must install all the drivers available if you want to use all the features of the laptop.

  Concerning

• Satellite A200 battery run time

  G ' Day, I have an A200 series PC laptop which is about 2 to 2.5 years, since the original battery died. I bought a new battery - one more (in other words, he had to last longer than the original). The new battery is not completely charged after charging for 6 hours, while the machine stops and only lasts 2 to 2.5 hours on battery. The power settings are balance and I especially don't work only with the word doc and sometimes the media player in the background.
  The original battery (small capacity) used to last 2-3 hours on these parameters.
  The manufacturer said tht, it may be a driver issue any.

  If anyone has had a similar dilemma, and there, anyone know how I could fix this problem apart from return to the manufacturer of the battery?

  Concerning
  Rgtom

  2.5 hour battery run time on the Satellite A200 is OK for me and it's the same as on my Satellite A300.
  I think 2.5 hours DURATION is just average for this model of laptop.

  Can you please tell us exactly what battery you bought?
  Can you send us exact Toshiba part number?

• deploy the run-time engine

  Hello everyone,

  I'm trying to deploy my application of teststand to a target computer. My teststand application uses: TestStand 2014 (32 bit), LV 2014 SP1 (32-bit).

  Here's the problem I encounter while using the deployment tool.

  1. in the attempt to include RTE LV in my Installer, the deployment utility requires that I provided LV 2015 Installer. See the attached picture.

  I wonder why she asked median LV-2015-64 bit Installer. If I ignore the request, the build process failed.

  

  2. I use the shared variable to communicate with the compactRIO controller. The compactRIO controller is hosting EVS. My question is,

  a. I have to "deploy" my variable library shared, even though my system is not an EVS?

  b. I read in the manual that I can deploy the variable Fanny shared through the LV utility deployed the lilbrary step. So I added this step in the test sequence. Whenever I run the sequence, this step deploys the shared variables. On the target, I wonder if it is necessary to deploy the shared variable on each run of the test sequence. I think it should only be deployed only once on the system target. Am I wrong? If so, how to remove this utility LV deploy step of the library of the test on the target sequence, since there is no development testbed on the target system.

  3. I use a database to record test results after each execution of test sequences. I can export the schema of the table data and copy it to the target computer. My question is, how to import the schema of the database in the target table, since there is no system development teststand on it (no way to call configure it-> result-> database to import the schema of the treatment table)?

  I hope that teststand experts out there can give me some help tips to help me understand the whole deployment process. Thank you.

  Yours,

  lhuckj

  (1) make sure that LabVIEW 2015 Run time is NOT slected to install options-> drivers and components

  (2) I don't know

  3.

  Generally, I put my data link in a UDL file and include that in my distribution.  I set the Connection string to use a relative to this udl path and make sure that the UDL is copied to the same location on the targer

  I have also included in my repertoire of the Application of TestStand CFg:

  TestStandDatabaseSchemas.ini

  TestExec.ini

  Users.ini

  StationGlobals.ini (attention if you do not want to replace the existing one, I use it to store the addresses of the instrument)

• Can we load and unload the files in the run time?

  Can we load and unload the files in the run time?

  For example, there are four files named 'test1.h & test1.c' and another series 'test2.h & test2.c' (I have attached as an attachment to this post).

  test1.h contains the code:

  int variable; variable declared as integer

  test1.c contains the code:

  variable = 1; variable a value assigned

  test1.h contains the code:

  char * variable. variable declared as string

  test1.c contains the code:

  variable = "EXAMPLE"; a string that is assigned to variable

  So here, in this case can I dynamically load / unload first & second group files so that the same variable "variable" name can be used as an integer and string? And if so, how to do?

  Hi pa1majeti,

  You cannot simply consider that some code is loaded into memory or not: all code in a compiled application is permanently in memory unless you divide your application into DLLs that you dynamically load if necessary and remove if is no longer necessary.

  But as I understand from your description, you're better given the amount of memory occupied by the data (i.e. the contents of the variables) rather than the code. If this is the case, your only option is to allocate memory for variables dynamically and free it after it has been used. Now, even if this option is useful if you are using large networks of data, there is little or no effect on the unique variables.

  A final Council, given the huge memory installed on modern computers, are you sure you really need that extra work? I mean, the dynamic allocation of memory involves some additional precautions in programming: check the errors on each function malloc or calloc, check that the pointer is valid before each use, freeing pointers before reassignment in order to avoid memory leaks and so forth, so a balance must always be sought between the memory and the difficulty in programming.

• Improved LabVIEW 8 to 2013 and VI asked now to find the installation package for Run-Time Engine 7.0

  I recently installed LabVIEW 2013 on a computer (running Windows XP 32-bit).  The machine has also of LabVIEW 8 is installed, which is what I used before the upgrade.  I opened a VI has been created in LV8 and then saved it and all its subVIs in LV2013.  Now when I open the VI in LV2013 and try to run it, a window opens asking me to find the installation package 'lvruntimeeng.msi' for LabVIEW Run-Time Engine 7.0.  If I cancel this dialog box, and the subsequent message, indicating that the installion files were not, the VI appears (at least of the initial inspection) to function normally.

  I have closed LabVIEW, downloaded Run-Time Engine 7.0 on the site of NOR and tried to install it, but I received a message saying that it is already installed (as I had suspected).  How can I determine what part of the VI and/or its subVIs tries to make use of Run-Time Engine 7.0?  If not, how can I get LabVIEW to use instead the Run-Time Engine 2013 that was installed when I upgraded to LabVIEW 2013?

  Bob_Schor wrote:

  You run your VI of a project?  If so, you can watch the dependencies and get an idea of what live "in charge", you might have.  There may be "something old" in your code in LabVIEW 8, which was replaced in 2013, but ' plane still around "-If you can identify it, you can probably replace it with its"more modern"equivalent

  If you do not have the VI in a project, you can simply open LabVIEW, create a blank project and add your first level VI.  If all of your relevant screws are in a single folder, add the entire folder.  Now look in the dependencies.

  BS

  Yes, I run the VI from within a project of LV.  After some more research in the knowledge base OR I could solve the problem by using the following procedure:

  1. use the measurement and Automation Explorer to uninstall Run-Time Engine 7.0

  2. restart the PC

  3. open the project, close the project by choosing "save all".

  4. restart the PC

  5 reinstall the Run-Time Engine 7.0 using a file downloaded from ni.com

  6. restart the PC

  7. open the project, close the project by choosing "save all".

  8. open the project and run the VI.  No more messages on LabVIEW, trying to find the Run-Time Engine 7.0.