NIC teaming + with leaves HP VirtualConnect and Cisco load balancing

Similar Questions

• How can I buy Photo shop so that I can re-branded to Member of the team with their own username and password

  I would buy Photo shop and have it show that I can assign to a member of the team with their own username and password. I bought it once before, and it would allow only the administrator user name and password to access. would it be controlled by the cloud team account so that I can assign to a user and have all my products Adobe controlled by a single account. Photo shop will be for a single user.

  Thank you

  Doug

  Team license links that can help

  - https://creative.adobe.com/plans?plan=team team plans

  -http://www.adobe.com/creativecloud/buy/business.html

  -https://helpx.adobe.com/contact/creative-cloud-teams.html using the team

  -manage your account http://forums.adobe.com/thread/1460939?tstart=0 team

  -Team Installer http://forums.adobe.com/thread/1363686?tstart=0

• How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

  How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

  Check your descriptor file to make sure that it shows the updated version, too.

• NIC teaming on ESX 5.1 and NGC failover

  Hi all

  A quick question. I know I read it before, but I can't find the reference again once. What is the recommended setting between allow vNic activate failover on cisco UCS and strategy setting on ESX 5.1 of the network?

  I know that I had read somewhere when the grouping of network cards is configured on ESX failover authorized UCS, ESX goes haywire if a path is lost the UCS.

  Our installation program running on UCS 2.04 Manager has with a mixture of blades M2 and M3 with M81kr and 1240/1280 cards respectively.

  Never use a fabric with a hypervisor vswitch failover. Let the failover of the vSwitch handle network failure mechanism.

  For ESX once you have two NICs attached to the vSwitch or a DVS it will automatically load balance and failover. You don't want you combine this with the UCS fabric failover.

  Louis

• NIC teaming with the IP hash load balancing

  Hi guys

  I have a virtual machine with a VMXNET3 10 Gbps. It is usually have a heavy traffic with a special server and saturate one of my two physical NIC of 1 Gbps in its PortGroup. I want to know what's going to happen if I turn on "NIC Teaming for this portgroup with basic IP hash load balancing". In my case the source IP address and destination are not change so the aggregates of traffic between my two physical network adapters?

  To avoid saturating completely the two 1GbE NIC, it can also be useful to look in charge based on the grouping and the NIOC. It will ensure that the other streams of traffic VM are not crushed by this machine a virtual when it saturates a network card. The disadvantage is that it requires Enterprise Plus licenses (using a dvSwitch).

• Override the port NIC teaming with powercli group?

  Hi all

  Any chance you could lend a hand?

  I have a powercli script that goes out to all of my ESX 4.0 host and add a new port group to vswitch1 with a new VLAN ID. That works well, but I also need to override the NIC teaming on this port group, to set an active NIC and the other to be the backup. (we put NIC failover port groups not the vswitches).

  I see ways to change NIC vswitches grouping settings, but am yet to find a way to change the settings of the NIC collection for groups of ports themselves with powercli?

  Can someone shine a light?

  Thank you

  Try something like:

  Get-VirtualPortGroup-name '' | Get-NicTeamingPolicy | Game-NicTeamingPolicy - MakeNicActive "vmnic1" - MakeNicStandby "vmnic0".

  I hope this helps!

• Problem with WISN LAP-1131 and Cisco

  Hello

  I have a Cisco WISN running the 7.0.116.0 version and it works very well with a lot of access Cisco 1131/1232/1242 points. But with one I have a problem. He has worked and loaded the flash image and got the ip address controller and began to show the below error:

  * 12:26:40.001 June 8: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 12:26:41.386 June 8: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.23.2.244 peer_port: 526

  * 12:26:41.388 June 8: % CAPWAP-5-SENDJOIN: send request to join 172.23.2.244

  * 12:26:41.388 June 8: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 12:26:41.577 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 12:26:41.583 June 8: % DTLS-5-ALERT: WARNING received: close notify alert from 172.23.2.244

  * 12:26:41.583 June 8: % DTLS-5-PEER_DISCONNECT: Peer 172.23.2.244 has closed the connection.

  * 12:26:41.583 June 8: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.23.2.244:5246

  * 12:26:42.270 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:26:42.271 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:26:42.340 June 8: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 12:26:42.340 June 8: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

  * 12:26:42.341 June 8: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 12:26:42.370 June 8: State of WLC voice_diag_test is false

  * 12:26:42.371 June 8: % LINK-3-UPDOWN: Interface Dot11Radio1, changed State to

  * 12:26:42.372 June 8: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to down

  * 12:26:42.377 June 8: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset

  * 12:26:42.398 June 8: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 12:26:53.000 June 8: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.23.2.244 peer_port: 5246

  * 12:26:53.001 June 8: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 12:26:54.389 June 8: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.23.2.244 peer_port: 526

  * 12:26:54.390 June 8: % CAPWAP-5-SENDJOIN: send request to join 172.23.2.244

  * 12:26:54.390 June 8: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 12:26:54.577 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 12:26:54.584 June 8: % DTLS-5-ALERT: WARNING received: close notify alert from 172.23.2.244

  * 12:26:54.584 June 8: % DTLS-5-PEER_DISCONNECT: Peer 172.23.2.244 has closed the connection.

  * 12:26:54.584 June 8: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.23.2.244:5246

  * 12:26:54.642 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:26:54.642 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:26:54.738 June 8: State of WLC voice_diag_test is false

  * 12:27:05.000 June 8: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 172.23.2.244 peer_port: 5246

  * 12:27:05.001 June 8: % CAPWAP-5-CHANGED: CAPWAP changed State to

  * 12:27:06.384 June 8: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 172.23.2.244 peer_port: 526

  * 12:27:06.385 June 8: % CAPWAP-5-SENDJOIN: send request to join 172.23.2.244

  * 12:27:06.385 June 8: % CAPWAP-5-CHANGED: CAPWAP changed State to ADHERE

  * 12:27:06.569 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state CFG

  * 12:27:06.574 June 8: % DTLS-5-ALERT: WARNING received: close notify alert from 172.23.2.244

  * 12:27:06.574 June 8: % DTLS-5-PEER_DISCONNECT: Peer 172.23.2.244 has closed the connection.

  * 12:27:06.575 June 8: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 172.23.2.244:5246

  * 12:27:06.635 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:27:06.636 June 8: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY

  * 12:27:06.704 June 8: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively

  * 12:27:06.705 June 8: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively

  * 12:27:06.706 June 8: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to

  * 12:27:06.735 June 8: State of WLC voice_diag_test is false

  * 12:27:06.735 June 8: % LINK-3-UPDOWN: Interface Dot11Radio1, changed state

  Thank you, Vincent a.

  Edit:

  When I look on the controller message logs, I see this line:

  * apfMsConnTask_0: 16:04:47.822 Jun 08: % LOG-6-Q_IND: spam_lrad.c:1517 application discovery elements in LWAPP 00:23:33:78:df:80 AP supporting CAPWAP

  Hi Vincent,.

  in this case, if the regulatory domain of the APs is different, consider that the WLC accept associations from the country set APs:

  http://www.Cisco.com/en/us/docs/wireless/controller/7.0/Configuration/Guide/c70lwap.html#wpxref84219

  You will see this in him debugs I sent you before.

  So, if you manage APs EI (ETSI, European) and - a (FCC, US) APs on the same WLC, you need to enable at least two country codes, one for each regulatory domain.

  Please also remember that the APs should be used on the countries they have been approved to in order to comply with local regulations.

  Thank you

  Federico

• Vary the size of the host and the load balancing

  I have a 4 4-host ESX cluster that is almost the maximum ability to manage virtual machines ~ 80 (and growing).  The hosts are configured with 4 to 8 cores and 32 GB of RAM each.  RAM is currently the bottleneck; Processor is not far behind.  I plan to replace one of the hosts with a much larger machine, 12 cores, 96 GB of RAM.  If a host is significantly larger than the other hosts in a cluster, DRS will still do a good job of load balancing?  I guess the DRS will place multiple virtual machines on the host to the largest.  Is there a risk of DRS. putting too many virtual machines on the largest node?

  Until the cluster is in CVS mode, or processors are compatible vmotion, you can vary the size of the resource of physical machines in the cluster.  DRS will try to balance the load, the better it can over all cluster resources.  Depending on your level of DRS aggressive, improving to a particular machine in terms of past performance is considered, so more that likely, that you will have more vm on the host of the largest.

  -KjB

• Monitoring of Tuxedo 9.1 and RAC load balancing?

  Hi all
  
  I wrote this question in the old forum that BEA [http://forums.bea.com/thread.jspa?threadID=300006084] and now I have more question about monitoring in a tuxedo with RAC load balancing:
  
  How can I control in a tuxedo with RAC load balancing?
  How can I verify that the tuxedo load balancing is running correctly?
  How can I know that this group using my requests?
  
  We need to know if the query uses the instance ORARAC1 (groups of GRP_A1 and GRP_A2) or
  use failure ORARAC2 (groups of GRP_B1 and GRP_B2).
  
  There is a tool (same txrpt) that displays this information in a Tuxedo 9.1?
  
  Thanks in advance
  
  P.D.: Excuse my English

  Hello

  How can I control in a tuxedo with RAC load balancing?

  You can use the tmadmin pq and ESP see work queue of orders and the work done by each server.

  How can I verify that the tuxedo load balancing is running correctly?

  What do you mean by properly? This is an area where many clients think that Tuxedo isn't the load balancing, but in fact it is. In general, Tuxedo will select the first server offering a service that does all work queued to it. If all servers have jobs queued, then Tuxedo will select the server with the least amount of work waiting in line. Specifically, this means that if the system is not enough charge, the first server in the list of servers offering service will receive all applications. Note that this is what happens in a single machine and no data dependent routing and routing CARS in the picture. With data dependent routing or TUXRACGROUPS defined, the algorithm is similar, but the possible servers to consider are limited according to the setting of data dependent routing or TUXRACGROUPS as explained in the note on the other.

  How can I know that this group using my requests?

  Without TSAM (Tuxedo system) and Application Monitor, it will be nearly impossible to tell which groups and servers a particular request was sent to. What you trying to accomplish?

  We need to know if the query uses the instance ORARAC1 (groups of GRP_A1 and GRP_A2) or
  use failure ORARAC2 (groups of GRP_B1 and GRP_B2).

  Without changes to the application or using TSAM, it's going to be very hard to say. Why is it important for your application?

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• Windows 2008 VM and NIC teaming with ether channel

  Hello

  I installed ESXi on an IBM ThinkServer TD100x and that you have created two VM, Windows 2003 Std (32 bit) and Windows Server 2008.

  Both were works well on the network and the ping requests until I have configure Cisco Channel ether using the road based on the source mac hash. The Windows 2003 VM worked very well and was still on the network, but the Windows 2008 VM loses network connectivity, couldn't out ping.

  Are there known issues with Windows 2008 and grouping of NETWORK cards?

  You will need to use the hash of the IP with Etherchannel (manual), LACP (static) or 802.3ad (static) trunking.

  Kind regards

  Collin C. MacMillan

  SR Infrastructure Consultant.

  VMware & Cisco certified

  cell: 205.960.3031 | Fax: 205.822.9650

  [email protected] | http://blog.Solori.NET

• NIC Teaming with PowerEdge R410

  I'm trying to configure the grouping on the 2 network cards on the server, I read things on the BINS (Broadcom Advance Control Suite) and it assumes that, have the BASP (Broadcom Advanced Server Program) incorporated, but has not, I try to download the utility on the site of Broadcom, but when I try to install they throw me the following error :
  
  and the same error appears when you try to install the driver.

  
  What should I do?

  Hello osunar

  Use the driver on our download page. BINS installed with the driver. If you have problems installing the driver so please provide the name of the file you are trying to install, the operating system and model of network card.

  http://www.Dell.com/support/drivers/us/en/04/product/PowerEdge-R410

  Thank you

• Problems with dvSwitch cluster with leaves HP G6 and G7

  Hi all

  We have an active EVC cluster (vCenter 4.1 /. ESXi4.1) with 490c G6 HP blades. Now, we want to add new 490c G7 HP blades.

  It works without problem in clusters without dvSwitches. In clusters with a dvSwitch, as soon as we add the new host of the dvSwitch, or do any other operation dvSwitch, the new blade Gets a GROUP:

  "#PF exception in the world 4129:helper11 - 0 IP addr 0x417f8011000 0x41802656686c 14.

  If you start the server it CMTF again. If you remove the pole one ESX departure once again, it works, until you try to do an operation on the side the dvSwitch ESX. You will need to do a fresh install on this blade for the ESX Server.

  Everyone makes the same expirience?

  Concerning

  Hideyori

  Have you tried to update the driver for the FlexFabric be2net? The version included in the HP ESXi (Dec 2010) image has some problems, but there are two available VMware now the most recent version.

  -Andreas

• Problema de Nic Teaming with blades Hp

  Hola a todos.

  I have a problema in una instalacion con unos blades HP BL460.

  OS as tengo lo cuento.

  • 1 chassis C3000.

  • 3 con BL460 4 red cards.

  • 2 Gbe2c Ethernet switches

  • 1 Cisco switch para toda the electronica.

  Las Vmnic0 Tarjetas y Vmnic1 estan conectadas a primer of al Gbe2c.

  Vmnic2 y estan conectadas al segundo Gbe2c, UN gráfico transcontine os Vmnic3.

  Created HE UN VSwitch para las Máquinas con VM Red

  cards:

  • Vmnic0 - Activo

  • Vmnic1 - Activo

  • Vmnic2 - passivo

  1 - if deshabilito los puertos del Gbe2c products con prueba las tarjetas Vmnic0 y

  Vmnic1, las comunicaciones pasan a Vmnic2 sin problemas.

  Prueba 2 - If deshabilito los enlaces between el primer Gbe2c y el Cisco, to corta Comunicación, no pasa a Vmnic2.

  Test 3 - if in turn to the config dejo esta earlier:

  • Vmnic0 - Activo

  • Vmnic2 - passivo

  Al cortar los enlaces

  between el primer GBe2c y el Cisco, conmuta correctamente

  a Vmnic2, are what should pasar back promotion prueba en are only dejan ver el Gateway.

  How puedo hacer para as having Vmnic0 y Vmnic1 running en

  Activo, any one Vmnic2 in case of failure?

  A greeting.

  Hola,

  Te lo cuento memoria, porque estos dias viaje estoy, pero la cosa era asi:

  Deshabilitas los puertos 17 y 18 (no se TR en el clase C so Tambi estos los puertos del crosslink)

  say/cfg/port 17

  say/cfg/port 18

  Al deshabilitar estos ports, there is no industry of nada el protocolo protocols spanning tree, por lo that yo lo deshabilitaria

  / cfg/STP 1/off

  / cfg/UFD/FDP ena (enable the funcion)

  LTM (link to follow)

  addtrnk o Add a port nn (idicar el puerto o trunk ports a monitorizar)

  / cfg/UDF/FDP/Ltd

  Add a port nn (mallards ports that you want to disable in the case of los indicados en ltm caida)

  If need more information, aqui me tienes

• UCS C200 and NIC Teaming/FailOver

  As UCS C200 with management of a 10/100 and 10/100/two interface 1000 interfaces and PCIe with 4NIC

  I want to install CUCM 8.5 is the NIC Teaming/failover supported by UCS C200 and how to set up the NIC Managment interface with failover?

  Thank you.

  Hello

  As you install apps from the CPU on the server of the UCS, speech application team listed their recommendations here.

  http://docwiki.Cisco.com/wiki/QoS_Design_Considerations_for_Virtual_UC_with_UCS#Guidelines_for_Physical_LAN_Links.2C_Trunking_and_Traffic_Sizing

  You can create a NIC teaming in the ESXi via vSphere client software for traffic from from / destined for virtual machines.

  For C200, we have only one management port and if you use the management for MMIC traffic port, switch option is not available.

  However, if you choose to use host for MMIC traffic NETWORK ports, you can set up CIMC NIC mode for 'LOM shared' which provides the NIC teaming options.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/GUI/config/Guide/1.4.1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01000.html#concept_AC4EC4E9FA3F4536A26BAD49734F23D0

  HTH

  Padma

• C200 M2 Windows 2008 R2 NIC Teaming question

  I have a c200 M2 Server with a map of map NETWORK Broadcom addon (N2XX-ABPCI01).  I would like to create a NIC team with all 4 cards (2 on board and 2 Broadcom).

  I found the enictool on the CD, but when I run it, it is not announce adapters or teams.

  How can I create a team on this server?

  Thank you

  Dave Harrold

  Hi Dave,.

  Utlities CD/.iso, you can find the BINS utlity for broadcom. This should help you.

  . / Afonso