Similar Questions

• Screen HP Blue that fades to black screen when trying to boot to the desktop.

  Original title: 'black screen '.
  I downloaded something and now when I try to start it ythe HP blue screen gives the fades to black.  Is there a way to restore from a command the DOS screen?

  Hello

  You receive an error message?

  Method 1:
  If you are not able to boot, then try to start in safe mode.
  How to start in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  If you are able to start in safe mode, and then perform the clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  Method 3:
  Also, try checking and startup repair.
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Method 4:
  If the problem persists, you can perform a restore of the system to WinRe (Windows recovery)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Window 7: Screen fades to black

  My computer is a laptop ASUS with Intel (r) Core i7-2630QM CPU @ 2.00GHz 2.00 GHz

  12.0 GB of RAM

  64-bit operating system

  And of course, running Windows 7.

  Well, then, I have a problem where my screen turns black.

  The computer does not turn off and none of the programs stop working, because I can still hear the audio of them continuing to play, but I can't ctrl + alt + del, tab, or prevent it from happening, I have to do a manual valve to the bottom of the computer. Once or twice it is simply cut to black, but most of the time it fades just for her.

  Then, sometimes, it will start to fade to black, then reduced, but then melted in the black again and stay that way. (Makes Me think THAT it is a screen saver, power booking glitch, but I checked that already, but if you have any other suggestions for this, far to offer).

  It is melted unrelated my battery or power cards, since I already have the game forever when you don't use, etc.

  I thought it had something to do with the graphics card with playing the games, as it is when it first, maybe burn, but it happens when I'm just on the desktop or on the internet too. It seems to be completely random.

  As a potential note which may have caused the it, which I doubt, but he started to happened after I did so it is possible, having had this laptop for almost two years I finally undid the bottom of things to clean dust (there a lot, kind of a surprise, it didn't ignite at any given time.)

  I used a computer dust spray, did not move anything about this, didn't remove anything, I just dusted. Made sure everything was in order and he has closed.

  Other then that, I have NO IDEA what could be causing this.

  Help would be VERY appreciated.

  Hello Pierre,.

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the black screen of discoloration in the computer.

  I would like to know some more information on this issue to help you better.

  (1) you get an error message while, the screen fades black?

  (2) the particular bland black while, to access the screen application?

  In the meantime, please follow the following suggestions to solve the problem.

  Method 1: You can try to check the below suggestions to shut down the computer.

  Turn off a computer: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/turn-off-computer-FAQ#1TC=Windows-7

  Method 2: If the above does not help then, try to follow the link below to change the power management and see if that helps.

  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/is-is/Windows/change-create-delete-power-plan-scheme#1TC=Windows-7

  Also refer to:

  Power plans: daycare TLY asked

  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• CSS image opacity fades to black transition

  In December, I created an image of transition with css. During the rollover image is transparency/opacity would go to zero, while the image behind it would show through. It worked, so now (in the last 2 weeks) it turns black, appears to zero opacity, showing the image in and then made another fade from black to the image. In my research to find an answer, I came across this same problem happening on other sites as well. Opera, Chrome and IE (no just transition Exchange images) works correctly.
  http://www.thelifebalance.com
  Place the cursor on the image of the top of the flowers

  Have you tried disabling hardware acceleration to see if that is the cause?

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Fade to black - start at 50%

  I always start my fade ins at 50% and ends with 100%.  Which means it gradually transitions black to the clip throughout the entire selection of transition.  By default, the first defines the appearance at 0% and ends at 100%, hereby making it black for the first half of the video then transitions into the clip.

  The problem is that even if I start the transition at 50%, the clip still in total black until the middle of the transition, hereby ignoring my controls.  In fact, if I put it to start at 50% and ends at 50%...it plays still the default transition.

  Is it a problem that I have to live with?  Basically, I'll have to double my sizes of transition in compensation, which is stupid.  Any advice?

  Ann,

  What you witness is not the problem; It is indeed the case in how Dip to black should work. The start and end values are not the degrees/percentage of opacity, but are rather the percentages of "completeness" of the transition. Dip to black going to 0% opacity to 100% opacity to 0% opacity (compared to black, not outgoing or incoming video), 50% upon completion of the transition MUST be 100% black. Here is a graphical representation (I had no time to paint or build it to scale):

  

  White represents an opacity of 0% of the black of the transition, where black represents an opacity of 100%. Think of the transition as a solid black which has the duration of the transition. By default, the transition starts with 0% opacity of this solid black, ramps to 100% opacity in the middle and then ramp down to 0%. That is why, in general, if you start the transition at 50% (as does the OP) you are effectively create a fade to black. Is it nature, Dip to black (or white) is a transition to both sides and therefore requires this re-posting of the start or end value for the effect.

  Personally, I never use Dip to black in that goal, even if it worked correctly with the MPE material, as it is simply too tedious. However, regardless of the aspect practice technique, he reveals a problem with the MEPS hardware.

  To the OP: as noted by Craig (shooternz), the following creates a blend of several layers without altering the slides of different layers (which are a common problem, given that many people just throw dissolves on each layer fade in/out):

  

• Screen fades to black

  I have the series g of HP Pavilion G7-1281nr computer laptop (Windows 7) I bought the Black Friday of 2011. I have not abandoned or spilled something on it so she just a little more than a year of normal wear and tear.

  Last week, he has started doing something that I worry can cause a few problems. I would like to stress that I change all the settings and it does when it has a full battery, plugged or not.

  When the screen goes black after inactivity and returns to the login screen, I just move my touch mouse and the screen comes back. I log in and then the screen goes black again. Then I move the mouse and the screen returns but then the screen goes black again. Then I move the mouse and then the screen goes black again. It usually does this somewhere between 3 - 5 times.

  I'm worried that it might have something to do with the screen out or could worsen at the level of other computers I've seen where the screen turns off for longer periods of time. I really hope someone can help me with this before that. Unfortunately, I'm beyond my warranty if this feels like my best game.

  Thank you for reading.

  Hello

  The first thing I would try is to use Recovery Manager to reinstall your driver graphic original - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 7

  After reinstalling, restart the computer and check if it helped the issue.

  Kind regards

  DP - K

• fade to black (pink flash middle managers) in first pro cc

  Hello

  When I melted black, I get a pink transparent flash between frames as the effect is happening.  The film has a white background that makes the very sensitive color.

  I tried framing key opacity and using a level, and have produced the same result.

  Any thoughts?  Thanks to you all

  I use a mac 2008 tour with four cores and 32 GB of ram.  OS X.8.5

  Eric

  CC 2014, source is 1080mts and was the open CL.  I think that's the issue, as well as other things how transparency and blacks are in interaction, after disabling mercury reading, he fixed the blackheads.  have not been on this project for a while check if this roses bars fixed as well, however.

• Captivate 5 - Quiz fades to black when the file is published

  Hi all

  I am using Captivate 5 and I am trying to publish a quiz as an exe, however once it is published and I see - screen screen turns black and nothing happens. I have to interrupt the session.

  I also tried to copy and paste the questionnaire into another project and run as a SWF in this project, I joined in and now the entire project crashes.

  Do know that if someone else did the experiment - I joined a picture like on the mask of the slides in my quiz, this might be the reason why it crashes?

  Thanks in advance!

  ~ K

  Do you by chance animations of text in your project?  If Yes, try to remove them.  It works now?

• How the auto fade or fade to black for most or all the clips?

  I'm working on the credits, 50 +, and next page gets old fast. I just wish all select and apply a dip or fade, suggestions?

  Select all clips, then go to the sequence > apply default Transitions to selection. This assumes that you have set your default transition and duration of the transition.

  Do not remember if it is default (I think), but the keyboard shortcut is Ctrl + Alt + Shift + D.

• Peut only the boot without failure; A regular boot freezes on the 'Welcome' screen and fades to black

  I use an ASUS laptop and everything was smooth until yesterday earlier.  I tried to start in class and it took a little longer (stopping at the 'Welcome' screen) but I'm starting up normal and thought nothing of him.  I'm going to the House an hour later and try to start and I can just connect to Windows 7 unless I Boot safe with networking.

  I have no idea how to fix this, I have no CD, I have no Windows CD that's at my parents (and anyway was a CD to upgrade), I spent 5 hours essentially pulling my hair out try everything last night and this morning still will not work.  I am now in safe mode.

  I would like to know all the details you guys need and how to get them and I'll probably get them to you immediately because I really need my computer today.  Thank you

  Driver card mother/Chipset should solve this problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Cannot dissolve white - it keeps going to black in half way through. WTH?

  Hey Gang, puzzled again.

  I have a sequence where I want a scene to turn white, which is then followed by the title of the film. Unfortunately, when I use the dissolve with the white (under video Transitions/dissolution), it begins to fade to white, and then to half way through fades to black. I'm stumped trying to understand him.

  It does this, regardless of what follows the clip, whether the title or nothing at all. He begins to fade white, then fades black.

  Here is the sequence, which is twelve seconds long.

  http://www.YouTube.com/watch?v=3w7_wQYZX2A

  Any advice?

  Create a color matte

• iMac screen plunges into the black when using Safari

  When you use Safari on my end 2014 27 "iMac, the screen will often randomly, fade to black.  Pressing the space bar will revive it, but it will sometimes immediately repeat the same thing.  When he exhibit this behavior, the Console message is:

  8:50:52.295 AM WindowServer [185]: device_generate_lock_screen_screenshot: authw 0x0 (0) [inf, inf, 0, 0] shield 0x7f9be085d600 (2001), dev [2048,1152]

  It's the second machine that to happen, the first was a late 2009 27 "iMac.  He can't get on my laptop. The system is:

  iMac (retina 5K, 27 inches, end of 2014)

  3.5 GHz Intel Core i5

  32 GB 1600 MHz DDR3

  AMD Radeon R9 M290X 2048 MB

  Any help you can offer with this deeply frustrating problem is appreciated gratefully.

  Hello captainlarrydart,

  Thank you for using communities of Apple Support.

  If I understand your message that your Mac is apparently going to sleep on his own, sometimes immediately after waking up.  To help solve this problem, please follow the steps below.

  If your Mac goes to sleep in an unexpected way

  Make sure that this energy saver is set up as you wish: choose the Apple menu > System Preferences, and then click energy saver. Adjust one or more of the following affect when controls your Mac goes to sleep. Some of these controls are not available on your Mac model.

  • Cursor 'turn off display after.
  • Cursor "display sleep".
  • Slider 'the computer sleep.
    If a slider is set to 'Never', sleep is disabled for this feature.
  • Schedule button

  Make sure you that you do not put your Mac to sleep accidentally:

  • Pressing on the button / stop can put your Mac to sleep.
  • Move your mouse pointer into a hot corner can put your Mac to sleep, depending on your settings from Mission control. Choose the Apple menu > System Preferences, and then click Mission control. Click on the button active corners, then see if any of the corners are set to "Display Put sleep."
  • Using magnets near your Mac laptop can put your Mac to sleep.

  If the previous steps do not work

  These additional steps can help identify or resolve the problem:

  • Reset the SMC.
  • Reset the NVRAM.
  • Disconnect external devices other than your Apple keyboard, mouse, and screen. If that solves the problem, gradually reconnect your devices, testing each time until you find the device that interferes with sleep. And then check the documentation that came with the device or contact the manufacturer of the device.
  • Start in Safe Mode to see if the problem is related to startup items not Apple, login items or kernel extensions.
  • Try to isolate the problem by using a different user account.

  If your Mac does not sleep or wake up when expected

  Have a good.

• 2015 Macbook screen unexpectedly to black discolouration

  Hello world!

  My brand new Macbook 2015 (just out of the box) has this funny quirk where the screen fades to black in an unexpected way. After a bit of aggressive mice that she Wiggles wakes up upward. It's as if the machine goes in mode 'sleep', even if I'm in the middle of using it (in typing, etc.)

  Is this a fault? Or is - can I enter a command that is switching off? Or she interacts with my iPhone somehow?

  My last mac is 7 years old, I'm still getting used to a lot of the functionality.

  Thanks for your time.

  The guarantee gives the right to the free phone support for the first 90 days of ownership.

  If you bought the product in the United States directly from Apple (not a retailer), you have 14 days from the date of delivery where to Exchange or return it for a refund. In other countries, the return policy may be different. If you purchased from a reseller, its return policy applies.

• Screen goes black randomly and the mouse resumed normal functions

  My screen started to be empty at random. It seems to do a quick fade to black as if the power manager is turn off the screen. The PC stops not is and shake the mouse he brings.

  I checked my video driver, malware, power settings (currently any screen power off or power off is disabled). Went to powercfg and checked last wake-up factor, but it does not list everything. If it's just a removal of the power management screen, not sure it would be listed here because it is not a full power down.

  Is there a way to tell if it is the power Division of the screen Manager and if so, what is the cause of do?

  I begin to suspect my keyboard although it's just a hunch. It's an old v1.0 MS Comfort Curve Keyboard 2000. Keys become a little sticky, although there is no any button power on this issue (like the old buttons suspend) and from the keyboard Manager, he was very much tied to her. According to me, it came with a mouse since I replaced it with a mouse Spawn CMStorm. Perhaps there is an intervention of the strange?

  Original title: off dead zone screen

  It doesn't seem to be a thermal problem of graphics card. Seems not be related to what application is running, or at room temperature and it seems to come back with the movement of the mouse (and stay off without moving the mouse) this is why I suspect something to do with power management.

  Any suggestions?

  It looks like the mouse driver or firmware causing trouble...

• Black and white conversion.

  What is the best way to convert the colors in black and white in PS CC RAW.

  General Hi P,

  Please visit the following links: black and white conversion using Camera Raw | Black and white conversion using Camera Raw | Peachpit

  5 steps to convert the RAW files to B & W | Popular Photography

  Let me know if it helps.

  Concerning

  Tanuj