Nikon D810 CC cannot read the .nef files...

Similar Questions

• I have lightroom 6 and just got a nikon d7200, lightroom now reads the tiff file so I can not download my pictures on lightroom

  I have lightroom 6 and just got a nikon d7200, lightroom now reads the tiff file so I can not download my pictures on lightroom

  You really produce TIFF files? If you are, no matter what version of LR read them. Files NAVE, not so much. For NEF files out of this camera, you can either upgrade to the latest 6.4 or CC 2015.4, or you can download the latest free Adobe DNG converter software and use it to convert your files to DNG and import those into LR 5.7.

  Back to TIFF format. If you are trying to import those and get a message that the files cannot be read. You will need to change the permissions on the folder that you copy the image to. Change the permissions if you have read and write access.

• Cannot delete files from 0 KB Word 2003 "cannot read the source file or disk.

  Original title: how remove the files from Word 2003 0 Kb which can not be read - file cleaner empty and an empty folder solvent do not work - "cannot read the source file or disc!

  I have a number of Word 2003 files that I'm unable to delete, since the message "Source file can not be read"appears when I try to delete.
  I have tried vacuum cleaner and Remover empty folder, also delete - file but cannot delete what cannot be recognized. Can anyone help please? Must be an easy way to do what I forgot, because I can't send files that contain some of these bulk files in my backup hard drive, the process stops when it reaches the 0 kb file!

  Hello

  1. where are the files located?
  2. are you able to open this file?

  This can happen if the file is used by some programs / demand or is corrupt.

  Follow these steps:

  Method 1: Check if you are able to delete the files in safe mode.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2: Ownership of files and check if you are able to delete.
   http://support.Microsoft.com/kb/308421

• Cannot delete file: cannot read the source file or disk

  When you try to delete a specific folder which shows on the list, I get a dialog box saying: error deleting file or folder... Cannot delete file: cannot read the source file or disk

  Is the path to the really long folder?

  Any file or folder has a space beginning or end?

  Click Start, run, type cmd , and press ENTER to open a command prompt. In the command prompt...

  For a file test

  DEL \\.\driveletter:\path\filename

  For a test folder

  RD \\.\:\\
   
  If this doesn't help not please let us know the full path (and the name of the file if it is a file).

  Tricky

• Impossible to remove a file from the desktop, get the error message "cannot read the source file or disk.

  I can't delete a file from my counter top. Error message: cannot read the source file or disk. He is an Adobe file with logo in white box.

  Boot into safe mode and see if it will remove. If this is not the case, try this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

• cannot read the source file or disc for install.wim when file copying.

  I'm doing a windows 7 bootable from a USB key, and when copying files every thing goes more except for the install.wim

  I get the error message "cannot read the source file or disk.

  I checked there is enough space on the disk, and I also tried copying from disk to my office, same question.

  I tried using the command line to move the file and get an "Access denied" error message, which I believe is the root cause as to why I can't move the file in the first place.

  Hello

  try to run the System File Checker.

  Here is the link:

  http://support.Microsoft.com/kb/929833

  It will be useful.

• Computer cannot read the .vp3 files needed for my embroidery software

  Title: original .vp3

  I try to install the embroidery software that came with my new sewing machine and although pilots seem to have installed ok I can't access embroidery designs, because the computer says that it cannot read the .vp3 files.  Why he cannot read, and how do I read that I can use on the machine.  Someone told all the answers no computer talk please.

  Unfriendly computers Hello,

  I'm not very familiar with the .vp3 extension but do not know that it is an extension that Pfaff is normally used. Look at the link below, because it gives the means of obtaining the .vp3 on a Windows machine.
  http://www.PFAFF.com/ca/en/media/CA/PF_INSTRUCTIONS.PDF

  Your program is not compatible with Windows 7. Check and see if you can use compatibility mode.
  Compatibility mode is incorporated on your computer, when you right-click on any application or program and select it properties, you have a Compatibility tab.
  In compatibility mode, we have options to manually change the settings.

  If you have problems with a program that worked correctly on an earlier version of Windows, select the compatibility mode that corresponds to this version.
  Run this program in compatibility mode for:
  Select the Compatibility tab: you can choose to run the program in Windows XP compatibility mode, or even all the way back to Windows 95 compatibility

  See the below link for more information about the same:make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows

  Please let us know if this helps solve your problem.

  Sincerely,

  .

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Cannot read the source file or disk" when copying photos

  I am train back to top/save families photographs stored on the C drive in the folder 'My photos' on an external HARD drive.
  Whenever I am trying to copy and to, I get a message saying "cannot read the source file or disk.  If I keep on pressing the button 'Try Again', he eventually some of the files copy the external HARD drive and fails on some.  There are times when I hit the "try again" Button to 30 times before it complies.
  I am logged on as administrator and am running Windows 7 on a HP laptop.  Could you help me debunk this?  I am beyond frustrated with this since I want to save precious family memories, but I am upset about windows on each attempt.
  Thank you
  Sandrine

  Hi JasjitRehsia,

  I've seen some posts where it is perhaps due to an error on the hard disk. See the article after some troubleshooting:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  I hope this helps!

• Error copying file or folder: cannot read the source file or disk.

  My problem occurs when you try to copy on the same computer I am on (or to a remote drive).  I get one of these messages in the dialog "error copying file or folder.

  box:

  Impossible to copy 'Filename': data error (cyclic redundancy check).
  Impossible to copy 'Filename': cannot read the source file or disk.

  Hey Norton victim,
  
  (a) what is your operating system?
  (b) what program file you are not able to copy?
  
  As the files are copied, Windows verifies that the data that has been copied are the same as the source files. The cyclic redundancy check (CRC) error occurs when the copied data does not match the original.
   
  This could be down to a mistake of the DVD, the disc goes wrong and has failed to 'read' the file properly or the file was placed on a bad sector on your hard drive. (Could be just down to a scratch or some marks on the dvd, maybe clean it if necessary and try again).
   
  I would run a check disk (CHKDSK) against the drive to rule that, although lacking - you have another dvd player to try the disc again? If so, try the dvd in another drive, or even a completely different machine to try to pin-point the problem.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
  
  FOR INFO:
   
  Data error (cyclic redundancy check)"Error Message When Outlook downloads E-mail
  http://support.Microsoft.com/kb/319128
   
  Aziz Nadeem - Microsoft Support

• Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk.

  Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
  I'm going crazy because of this

  Hello

  1. What is the format of the file system on the external hard drive?

  2. are you able to copy or move files into the computer?

  You can follow the suggestions mentioned below and check with the question.

   
   
  Method 1:Delete CCG, prefetch files.
   
  Step 1: Delete Temp files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all Temp files in the Temp folder
   
  Step 2: Delete Prefetch files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all files in the Prefetch folder.

  Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.
   
  Follow the form of measures the following link: http://support.microsoft.com/kb/929833
  Method 3: Run the check disk then try to copy the files and check.
  
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Note: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.
   
  See also: http://support.microsoft.com/kb/976972
   
  I hope this helps!

• I have the latest downloadable version of the LR5.  It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it displays a message that LR has to leave because he cannot read the preview files and it will try to fix

  I have the latest downloadable version of the LR5.  It crashed while it was perceived 1:1 uttered during an import. After a restart of the Win764(), it shows a message that LR has to leave because he cannot read the preview files and it will try to fix it the next time's lance.  I get the same message to another and whenever he throws so I can't launch LR at all now.

  I get the preview of a file has been corrupted somehow.  Is it possible to fix this without having to build a new catalog?

  Use Windows Explorer to open the folder containing your catalog. You will see a folder with the extension .lrdata. You must remove this folder, and then restart the Lightroom. Lightroom will generate a new folder of previews.

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• Cannot read the PDF files created by the FTP adapter

  Hello

  I cannot read the pdf files generated by the FTP adapter with its default settings.

  Can someone guide me how to proceed with him. I guess I have to change something in the mechanism of coding in the FTP adapter outbound connection Pool, but do not know what is to be.

  Thank you

  Richa

  Hi all

  I got the solution. I was unable to read .pdf files because the FTP adapter send files just by changing the extension of .xml to .pdf .txt is the reason why it was not readable.

  We had to write a java code to convert the .xml file .pdf and then PAA to the FTP adapter.

  Thank you

• 12.1.1 new install: AC-00402: cannot read the driver file: addbtmpl.drv

  Hello
  
  Im making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.
  
  I did the pre-installation steps according to metalink 761566.1
  He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. This is step 2 of 5-> database configuration 92% (RW50004). I can't proceed immediately.
  
  /U01/app/Oracle/DB/tech_st/11.1.0/appsutil/log/VIS_ < servername > 09171403.log
  
  Logfile located at /u01/app/oracle/db/tech_st/11.1.0/appsutil/log/VIS__ < servername > ApplyDatabase_09180926.log
  
  
  | 0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
  
  Cannot run configuration database using RapidClone
  
  RW-50010: error:-script returned an error: 1
  RW-50004: Error Code when you run the external process. Check the log file for more details.
  Install the driver of database running for instance SCREWS
  
  Thank you

  Im making a new 12.1.1 install the new test server and unziped downloaded media on the disc (not not using DVD). I ran not adautostg.pl because I felt is was not necessary because the downloaded media.

  You don't need to run the intermediate script if you have downloaded the site Web e-Delivery - in the electronic help files fast delivery to install in Oracle E-Business Suite Release 12 [406138.1 ID]

  I did the pre-installation steps according to metalink 761566.1
  He did uncompress drives then I get the following error and I can't file: addbtmpl.drv anywhere. It is step 2 of 5--> (RW50004) database configuration 92%. I can't proceed immediately.

  0% completed AC-00402: cannot read the driver file: /u01/app/oracle/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv

  It seems that the file is missing.

  Please run md5sum according to (checksums MD5 for R12.1.1 Quick Install Media [802195.1 ID]) to check the integrity of the domain stage directory before running the quick installation.

  Thank you
  Hussein

• 6.6 Lightroom cannot read Raw (Nef) files.

  Up to a few days, I was using portable window. I got a new Macbook Pro 13 "."

  I installed LR6 on my new Mac and the catalogue LR transfer above the window for mac laptop. My photos are in the external hard drive. Open the LR catalog and work on my already imported and convert to DNG very well. But when I try to import new photos, I shot today with Nikon D800, LR message saying it cannot convert the raw file because it cannot have their loan.

  I also download and install the latest DNG Converter and try to convert them with it and it won't be.

  Any help would be appreciated.

  Thank you

  SOM:

  Make sure the folder that you copy into a read & write permissions. In the LR import dialog box, the Destination Panel on the right should be open with the file highlighted. The full file path must appear at the top of the right panel.