NILOX NIGHTVISION WEBCAM XP DRIVER

Similar Questions

• HP Pavilion g6 - disconnected webcam / hand driver missing?

  Product name: HP Pavilion g6

  Product number: A3A09EA #ABU

  Dear HP support,

  My problem is as follows:

  A day that I realized that I can't use my built in camera more. I tried reinstalling original preinstalled software Cyberlink Youcam, but as you might assume if it worked - I wouldn't be here. Then I tried according to HP troubleshooting guide. The problem is that there is no category called "Imaging devices" at all.

  I can place two bets on what might actually happen:

  (a) I managed to remove the HP webcam 101 driver base. Is the exact name of the device: USB\VID_05C8 & PID_021E & MI_00

  (b) internal unit itself broke down (it has not disconnected issue of cord - made sure that myself)

  I think I could try to install base driver for the camera, the problem is I can't find a / can't find a reliable source. Can you send me / download for me? How to proceed in this case, do you have any suggestions?

  Hey @RacA ,

  Welcome to the HP Forums!

  I understand that the webcam no longer works on your laptop.

  Make sure that when you are in Device Manager you are hidden display devices. (View > show hidden devices.) If the webcam is missing, it is possible that the Acquisition of Image Windows service is damaged or does not work. To ensure that this service is on a start-up automatic and non-disabled.

  The CyberLink YouCam software only allows an extended webcam support and does not contain real pilots. Drivers are generic enough and come directly from Windows.

  I suggest you restore the laptop to a time where he worked, and if it does not reinstall Windows before you replace the webcam. To restore or recover tap the F11 key, while the portable lights to access the HP Recovery Manager.

  Hope this helps!

• problems with webcam and driver...?

  my laptop is dell core i3 model vostro 1540, there the camera problem, the result of the camera is black and white... I can't really know how to fix this problem... .and I found there's a driver named lexmark x 422 is not proceed with the installation correctly how fix me both issues? decline me as soon as possible...

  Hello

  Start a separate thread on the Lexmark driver that is your printer. Don't forget to register your
  Version of Windows and other information that we need us help to help you. Use the forum
  for your version of Windows.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  ===============================================================

  Don't forget to check with support from the manufacturer of your system, drivers, and documentation online and ask
  their forums (if any) where there would be others with the same model if a WebCam integrated or the
  Real WebCam manufacturer if a separate device. Links to the Dell Support below.

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with Dell Support, online documentation and drivers (update or reinstall), and
  their forums.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• {A} Alienware M18X R2 Webcam software/driver

  Hello

  I am new to dell community and this forum. I had a little problem with my M18x laptop after formatting and loading Win 7 Ultimate. I can't find the driver/software that will allow me to use my webcam.

  I can't find it on the dell Web site or on the resourse disc came with the laptop. I made an account of dell and I can't find it under "My downloads" as well. I have the topic my downloads are "Media Suite Essentials BD and DVD", i.e. for Windows 8 and "Media Suite Essentials DVD/BD" which is for windows 8.

  Can someone help me with this please? Or at least to guide me on the correct path.

  Sorry if I'm on the wrong page, or if my English is not at the height because it is not my first language.

  Thank you.

  OK guys,

  Just post this answer that I had this problem the other day where I couldn't see the dissemination of the Webcam in the list of devices etc..
  In this case you follow the steps below:

  Step 1: Press and hold down the Fn key and then press F9 (the button with the small camera on the subject).

  Job done. You should now see imaging devices in your device manager, and if you were opening the software Dell Webcam your face should suddenly appear on the screen...  Enjoy.

  Ben Camilleri
  Ben [at] camotec.com.au

• Not properly installed webcam device driver

  My laptop Sony Vaio VPCF232FX incorporates a webcam which worked fine until today. Now it says that the device driver has not been installed successfully and appears as an unknown USB device in Device Manager. I tried to uninstall the driver and restart a system restore and manually locate the driver successfully. There is no available driver software.

  Hello
  
  Because reinstall the driver and the system restore did not work. It could be a hardware problem. Then I suggest you to contact Sony support for assistance.
  
  http://eSupport.Sony.com/
   

• R400 - looking for webcam software &amp; driver

  I have a laptop computer Lenovo R400 7439 v54 with integrated webcam

  in Device Manager, it is not shown

  I nee to install software and drivers

  Can U help?

  Hello

  You can find the drivers in our support site:
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS003038

  I hope this helps.

  Kind regards

  Cleo

• Acer aspire 431p webcam unknown driver v5

  My webcam does not work, whenever I have try my applications that have need of the camera, it says please connect the camera in Device Manager, the webcam is unknown with a yellow fr on it and I really need my webcam help will be much appreciated and also ive tried system restore but I haveno points of restoration before I installed updates the win8 (implementing webcam updated couldve been the problem) thanks

  Hey Riki,

  Thank you for the update.

  What is the exact error message you get associated with Photos app?

  Earlier you got the error code 43 for the device, which means one of the motors controlling the unit notified the operating system that the device has failed in some way. In other words, that there is a possibility of defective material. We tried to uninstall and reinstall the drivers for the device, and then he worked for a while and it stopped working again. Now, I suggest you to check if the same error code is listed in the Device Manager. If she says the same error code means that the device is defective. Thus, it would be better if you contact Acer hardware support for assistance.

  http://community.Acer.com/T5/Acer-Forum-discussions/CT-p/boards

  You are always welcome in our community for other issues related to Windows.

• I get no cd for the graphic card drivers, webcam &amp; bluetooth driver with g6-1139tx.

  HP Pavilion G6-1139tx

  Win-7 32-bit

  need hardware accelerators on or last update of installed drivers.

  Hello

  Drivers and software for your laptop downloads do not exist on your Product Support page here.

  Kind regards

  DP - K

• Satellite Pro L450 - 13 M - Webcam driver open failed

  I am running Windows 7 with a Satellite Pro L450 - 13M.

  My webcam just stopped being recognized by one of the programs on my system. Skype, Toshiba camera etc etc. One day it was fine, a little later when I tried to use it again once it is stopped. I only use it for Skype usually, so I have no weird imaginative bit of software that could get in the way.

  Uninstalled the Toshiba camera software, uninstalled the drivers. Reinstalled the software of the camera - although there seems to be about 400 slightly different versions. I think I have the right one. TC30049700E.

  Windows 7 has resolutely reinstalling the drivers by itself when I boot. He puts on Sonix 5.8.54.1 driver. If I look at the details, there is a list of 6 files, which look reasonable.

  Checked the device manage, who says "this device is functioning correctly. The problem is, this is a lie!

  Curiously, the microphone works well (I thought this was an integral part of the webcam).

  What I would really like to do is to separately install the device driver, without the software package any camera.

  But to be honest all ideas are welcome. It is very irritating and I'm running out of ideas and I'm about to go far company for 2 weeks and I use Skype to talk to my children. I'm kind of semi technically as you can see, but are not fluent, and Windows 7 is new to me. The laptop came with it, and the webcam was working fine when I bought it at the end of February.

  Hi tsgcjcs,

  At the moment, I can t imagine that this is linked to the new version of BIOS... Usually new versions of BIOS fix problems so I think it was just no chance with the BIOS update and webcam
  But if you want an older version of BIOS, you can get it from an authorized service provider. As far as I know, they have all the old versions of BIOS.

  But before that, try to update the webcam software/driver. First delete and restart your laptop. Then use CCleaner to clean the Windows registry and reboot again. Now, you download and install the latest driver from here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  As far as I know your model belongs to the series of PSLY1E, then check the page and try this!

• Portege M800: webcam does not work with Win 7 64 bit - webcam driver open failed

  Hey guys

  just got my companion to upgrade me for win 7 64 bit.
  Now, my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?

  "driver open webcam fail. Please restart camera or computer.

  See you soon

  Hello

  Seems that you used the wrong webcam software/driver or is not compatible
  You must use a webcam Chicony Win 7 64 bit software.

  > Now my camera does not work. I had to reinstall the drivers (they only had vista drivers) - can anyone help?
  The Portégé M800 Win 7 drivers are available on the European driver Toshiba page.
  You will also find the driver of Webcam Win 7 64 bit 1.7.260.0526

  Please remove first the old driver, and then restart the unit clean to the BONE using CCLeaner, reboot the device again and then install Chicony webcam software.

  Welcome them

• Satellite A300 - constant "Webcam Driver Open Fail' error

  I have searched and looked for solutions to this problem and feel like I've tried everything. Whenever I turn on my laptop or try to start my webcam I get the error "Webcam driver open fail." Please restart camera or computer. »

  I used to be able to use the webcam with no problems, but it just stopped one day of work. I recently reformatted my drive to operate the State out-of-the-box, but it always shows an error whenever I try to use my webcam. I am running Windows Vista Home Premium on an A300 model: PSA - GCA. I also tried updating the driver for the webcam (and the last update of the BIOS) section of the support from Toshiba, but without success. I also tried to use the webcam XP driver, but still no luck.

  Any idea on how to solve this problem?

  Post edited by: Replicant

  I also forgot to mention that in my device manager, I don't see my Chicony Webcam at all. There is no section for current imaging devices at all.

  Hello

  If you're looking for here in the forum you will find a sufficient number of threads on this problem but I founded a thread interesting with good detachment of user Akuma and mayb s useful for you:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=136549

  If it doesn t work I think you need assistance from an authorized service provider. Technicians can check your laptop and fix it if necessary s.

  Good luck!

• Webcam and internal microphone stopped working Satellite C660 - 1-7

  Hello

  I've had my laptop for several months and everything was fine until yesterday when the internal microphone no longer works so today I come to use the webcam, and it is said that he didn't and must be restarted (I did several times).

  I tried to download the latest driver that I have on my pc. I run the file but nothing happens nothing thereafter i.e. no installation wizard.
  Am I doing something wrong, that I have to delete the existing application?

  What's not here?

  Hello

  The webcam should be included under point: imaging devices
  You should see peripheral USB video.
  You see that?

  If you can see this, then uninstall the driver in Device Manager.
  Then, go to control panel of-> software and uninstall webcam software.
  Then clean the BONES and the registry using the CCleaner.
  Then restart the laptop and download the latest version of the software webcam Toshiba driver page.
  Install the webcam software and reboot the laptop.

  After that the laptop has started, start the webcam software and check if the webcam can be used.

• Satellite L500 - failed to initialize webcam

  Webcam always worked... all of a sudden, it will not open and I get the message:
  + "failed to initialize the webcam." Please check your device and restart the application or computer. » +

  The device is what is installed on this Satellite L500 laptop.

  No indication on how I can check (diagnose) the camera

  Can someone tell me how I can check the camera, or its driver, or something else to make it work again?

  Your contribution is appreciated.

  PS: there is no indication below all if I'm going to be notified of responses. If moderators can report what it is a small consideration for those of us who are not technically minded.

  Hello

  I think you should first update / reinstall the driver for the webcam / software.
  You will get the webcam software / driver for Win 7 of the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  before you would be stars the webcam driver installation, I recommend you to uninstall the pre-installed software (Control Panel-> programs and features)
  Then restart the laptop and install the new downloaded drivers

• Problem in installing the USB for HP 15-D009tu Windows 7 64-bit driver

  Hello

  PL. provide us with contracts for the installation of webcam & USB driver for laptops HP 15-D009TU in which after installation

  Readers USB in Windows 7 64 bit does not work and it has yellow question mark in front of the USB driver in Device Manager.

  Driver HP url does not work for the same. C. HP care too are not having solutions at the moment.

  @MT1971

  I asked HP. The official answer is that HP has no plans to release a USB driver 3.0 for your laptop computer to the Windows 7 operating system.

  You might want to consider reinstalling Windows 8, so you can enjoy all the features of your laptop.

• Webcam Skype does not work Desktop App, no metro App

  Skype desktop app works perfectly, but the metro app fails to open my webcam. I use Windows 8 64-bit with camera Logitech C920.

  The camera shows app launch: 'sorry. The camera cannot be used with this version of Windows. "I also tried installng Logitech Camera Controller app in App Store, but the problem persists.

  I managed to solve the problem of roll back my display driver. I repeat, * driver *, no webcam display driver. Video chat now works in the metropolitan area of Skype.