problems with webcam and driver...?

Similar Questions

• Qosmio G40: problems with webcam and start

  Hi everyone, am always lift start 50-50 with webcam when using messenger, even with the tv tuner off. Also get the laptop mystery don't turn on in battery mode, which is cured by reinstalling the battery. Toshiba has indicated that its been to the workshops.
  But no miracles at least that any one out there knows everything?

  A big thanks Steve H

  I read many comments on webcam problems run the Microsoft messenger. Only this Messenger made a few worries and is not entirely supported by the driver for the webcam.
  An update could therefore help;
  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=105364

  With regard to the battery issue.

  Well, it seems in your BIOS options supports the wrong settings.
  WAKE-UP ON BATTERY must be checked!

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28045

  Best regards

• Pavilion dv6 problem with webcam and microphone

  Hello
  I have a HP Pavilion dv6-6156ea, which is a little more than a month.  It runs Windows 7 Home Premium.
  Today, tried to use the webcam and microphone for the first time, a Skype call, but none of them does not seem to work.
  The webcam is not displayed in Device Manager, but the microphone is.
  When I opened Cyberlink Youcam, it does not recognize that there is an internal webcam.
  What should I do to activate the microphone and the cam?

  I followed the link below and follow the instructions.  But the webcam is not displayed in Device Manager.

  http://support.HP.com/us-en/document/c02452221

  Because is not find the device, I don't know how to update the drivers.

  I don't know how to solve the problem with the microphone.  I don't know if these things are likely to be associated.

  Any help appreciated

  Thank you

  Feel a little silly answering myself, but no one responded and I thought it is best to share what I found out.

  The webcam was defective, straight out of the box.

  And the microphone is connected to these features, but uses a different driver - if your microphone works, it could be a sign that your problem is with the driver for the cam.

  I bought the PC world a month ago, so there was although it is very busy.  It was the second faulty webcam in HP they had returned today - most early was a dv7.  There was no problem with replace - they took a glance, considered to be the installation of the drivers on a disc, but when it was not displayed in Device Manager and the microphone works not more, they knew right away.

  It really shows control of very poor quality of Hewlett-Packard.  It's a shame that in the first weeks, I was really happy with this model, but realistically, now I know that this is what looks like their QC, when my company needs its next piece I'll go with anything other than HP.

• Problems with webcam and microphone on the Satellite with Windows 7

  Hello
  I installed Windows 7 on my Toshiba Satellite and all of a sudden the webcam and the microphone does not work.
  I tried to find the appropriate drivers, but I can't seem to find.

  Could someone please help?

  Best regards
  Teresa

  Hello

  The webcam software is designed by Chicony.
  This model of laptop s independent and, therefore, the use of the webcam software that has been released for other models of laptops may not be a problem.

  I recommend you the driver for Toshiba Satellite L500 series area.
  There you can download the drivers for Win 7 32 bit and 64 bit OS.

  Welcome them

• 4 desire 1015dx: problem with webcam and microphone windows 10

  Hi all

  I bought a 4 craving and I upgraded to win10, webcam and microphone are not working now, it displays unknown device in Device Manager, I tried to install the drivers for win8 and win7, but it doesn't seem to work, I am trying to downgrade to win7 now, but it seems that I lost the recovery partition I tried to get from HP, but he told me to buy it for $49.99, what kind of support is.

  If anyone has a solution for this please help me with this (problem or demotion to windows7 webcam).

  Kind regards.

  Hello @November12,

  Welcome to the HP Forums!

  I read your message and understand that the webcam and MIC do not work on your HP Envy Ultrabook 4-1015dx. I have studied the issue and have developed a possible resolution. First of all, please perform a reset. Once this is done, please follow the steps described in these documents:

  1. HP PC - Webcam troubleshooting (Windows, 10, 8)

  2 HP Notebook PC - test a Webcam using YouCam (Windows 10, 8, 7)

  3. HP PCs - troubleshoot microphone (Windows, 10, 8)

  If the document does not have you helped to solve the problem, try to restore the BIOS , then check the updates of windows.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• Problems with WebCam? YouCam allows to test your WebCam

  Software using YouCam to solve your Notesbook WebCam problems

  Problems with your computers webcam portable? You can use the YouCam software to solve problems with your webcam. It was really only a few questions, which can cause problems with webcam. Driver problems, bad video configuration and software issues. YouCam will be able to identify these two problems for you.

  Troubleshooting with YouCam

  
  First you want to make sure that all other applications are closed. Other applications can steal the priority of the YouCam software that could interrupt the troubleshooting. Then open the YouCam software. If there are problems with the WebCam, you will be alerted with an error message here.

   

  "Unable to connect to the video device" error:

  Hope this helps to solve many problems of webcam. Again, this is an informational message that should serve as a reference. If you have gone over these steps and are still problems please create a new thread and include your computer model, operating system, and any other information that would be helpful in resolving the issue.
  
  Thank you!
  Sean S

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• I bought a physical copy of Lightroom 5, but I'm having a problem with my disc drive (iMac - vintage 2009 - running os10.7.5).  I tried to download a trial of LR5 creative cloud and using the serial number of the box, but the license key is not vali

  I bought a physical copy of Lightroom 5, but I'm having a problem with my disc drive (iMac - vintage 2009 - running os10.7.5).  I tried to download a trial of LR5 creative cloud and using the serial number of the box, but the license key is not valid.  Is there a way I can download a copy so that my license key will work?

  A download of Cloud will not work for a licensed version.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Problem with webcam on Acer Aspire E1-532

  Hello guys,.

  Problem with webcam on Acer Aspire E1-532,

  I have installed new OS on my system and realized that my webcam no longer works, HD webcam, I tried the search for solutions on the net for the 2 last days but cudnt find something specific to the problem.

  I m running Windows 8.1 company on my system, help out me please my friends,.

  Kind regards

  Sushant

  @justin: thanks for your comments,.

  last week I fixed it fortunately, I kept on looking for HD webcam drivers and found a driver called "Realtek HD Audio drivers". I just uninstalled all previous drivers for webcam and audio too, then I installed the HD audio driver and then everything works fine now, indeed, acer crystal webcam is not necessary all, juice install this driver HD and everything works fine... Thank you.

• Pavilion Notebook PC 15-079er: problems with sleep and shutdown 15-n079er HP Pavilion Notebook PC.

  Hello world

  I have a huge problem with my Pavilion. I used Windows 8.1 earlier, and I decided to upgrade to Windows 10. I did not like something (can't remember what) and decided to return to Windows 8.1. Almost a year passed, I am again on Windows 10. But if I SLEEP my computer:

  • Screen goes black, everything seems normal.
  • No matter how long wait, fan keeps spinning and power LED, LED Wi - Fi on.
  • Keyboard input does not help. Does not meet what it is.
  • The only thing left to do - stop hard.

  And if I shut down the operating system:

  • Windows normally stops, close all applications, screen goes black.
  • Fan on, led on.

  I did not notice these problems with restarting and the hibernation.

  Two things I've done in this gap of the year:

  • Replacement screen. An old broke. Thanks to my cat...
  • Formatted the drive. I don't think it would do anything diffirent.

  So, any help would be appreciated.

  Thanks in advance,

  Kebab

  Hello

  On some machines, the pilot for 11 series IMEI has been known to cause that kind of question of the judgment, so it may be worth trying an earlier version.

  You can use the following method to install an earlier version of the driver IMEI.

  Download driver IMEI on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66228.exe

  Disable your wireless card (should be f12 ).

  Open your download folder and run the installer - it warns you that it is an earlier version, but simply continue.

  When finished, restart the laptop.

  If the computer shuts down correctly, turn on your wireless adapter and use the utility on the following link to prevent Windows 10 to update automatically the driver IMEI again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• Problem with webcam not fixed with Vista SP1 on Portege M700

  The Vista SP1 does nothing to the failure of Vista to recognize the built-in webcam Portege M700.
  The existing forum thread mark this question as a response, despite the link to the document toshiba mentioning the error messages entirely different from those cited by those of us with problems

  I find it strange that the M700 UK wouldn't have a built in webcam; is it really true?

  Hello

  I noticed a problem with webcam in time early Vista release, but it was linked to the Vista OS stroller and was solved by SP1.

  Sorry, but another problem with webcam into the unknown for me and as far as I know internal webcam works fine also on Portege M700.

  As you already suggested the internal webcam is not available on all Portégé M700 series. Toshiba notebooks, any series, are equipped with different hardware specifications and example to the webcam internal, in the light of the webcam and internal microphone are available on some models.

  Maybe no problem with a webcam, but some Portégé M700 does not really have an internal webcam ;)

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.