NMH305 cannot start Media Server
I just bought a NMH305 and have updated the firmware to 3.18.4. I implemented such that provided and all right and the Media Server worked and could be detected by the media players on my local network. I then added a second 500gig SATA drive and it was quickly recognized. I put the linear Raid 2 configuration (for a total of 930gigs). I was able to move files on the disk configuration and everything seems OK.
However I'm unable to activate the Configuration Server / media to on. When I click on activate the media server small pop - up appears, but the options to "Find media shared on my network" is grayed out. If I then click 'Submit' nothing happens for a few moments and then upcomes another popup saying ' Media Server is disabled. GoTo settings/Services to enable your media server... "
I can enable and disable the itunes, ftp and other options in the page configuration, one Server - the only Media that interests me really wont one more.
Can anyone offer any help? Thank you very much
Thank you, Wilins377, that did the trick. The machine has reset itself to factory firmware, and my files are all intact. I can now update the sile system and the media server is running. The system is asking me to upgrade the firmware later, but since everything seems OK, I'm inclined to leave well alone.
Thanks again.
Tags: Linksys Media
Similar Questions
-
Cannot start web server on the executable file
Hello
We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.
As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.
I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.
When executing:
- The code will sit in the while loop until I press stop.
- Web server: Active Server = FALSE
- Out error = ERROR No.
In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">50ms>
It's the ini file to the executable file:
[WebTest]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
server.tcp.serviceName = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.Enabled = True
WebServer.TcpAccess = "' + * '"
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = FalseAnd it is the Web server configuration file:
ErrorLog "$LVSERVER_ROOT/logs/error.log".
LogLevel 3
The default server name
DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
Listen 8000
ThreadLimit 10
TypesConfig "$LVSERVER_ROOT/mime.types»
DirectoryIndex index.html
LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
LoadModule LVAuth lvauthmodule
LoadModule LVSnapshot lvsnapshotmodule
LoadModule LVRFP lvrfpmodule
LoadModule dir libdirModule
LoadModule copy libcopyModuleAddHandler LVAuthHandler
AddHandler LVSnapshotHandler .snap
AddHandler LVRFPHandlerAddHandler dirHandler
AddHandler copyHandler"CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
KeepAlive on
KeepAliveTimeout 60
Timeout 60As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?
I tried the things:
- Copy a new default configuration file before the entry into force
- Writing a predefined file (encoded) before initializing config
- Definition to root before initializing directory (it actually generates an error because the server is not active...)
- Set WebServer.Active = TRUE several times inside the while loop
- Toggle the web server in the ini file
System:
- LabVIEW 2010
- PC with Windows 7 running
Thanks for any help, because it makes me crazy slow!
Ben
Hi Marco, thanks for the reply.
I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!
If anyone is interested, here's the problem:
The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!
This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.
AND
You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.
The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup
-
SDELETE and now I cannot start my server.
I ran SDELETE last night and now I have no space on my VMDK and cannot start a virtual machine. Unfortunately it is a VMDK 1.9 on a LUN 1.9 TB tuberculosis. I had 450 GB free before the SDelete. This morning, my VM showed 75GB but funded space shows 4 TB. The SAN now shows 0bytes available and my vmdk looks like it's running a cliché, but I don't have everything clings to remove.
Someone at - it suggestions?
If the virtual disk, two of which appear in the settings of the virtual machine is ' EGI - GMEDIIS.vmdk ' and ' EGI - GMEDIIS_1.vmdk ", so I guess that"EGI-GMEDIIS_1 - 000002.vmdk"has been one of the virtual disks that you have replaced in the settings of the virtual machine, and so it is obsolete now. However, in order to ensure that it is being used more you can stop the virtual machine, move back "EGI-GMEDIIS_1 - 000002.vmdk" to a new subdirectory and power on the virtual machine. If it works, you can safely delete the subdirectory with the now obsolete hard file.
André
-
C855-1VT satellite - cannot start media recovery disk
Hello
I have the laptop above that was dumped on its edge causing the hard drive to the jam and fail.
This means no access to the system recovery, so I ordered arvato shop Toshibas Recovery Media recovery media.I installed a new HARD drive has slipped into the recovery disc and boom, no bootable media insert system disk.
I tried the disc on other laptops, same thing, with no bootable media, but back to arvato who kindly sent me disks replacement... you guessed it... exactly the same thing so I put in my windows 7 install cd and it read the disc properly.
Arvato said they asked toshiba to check the image which they did and found no errors, but the stock of arvato could be faulty, I thought. in any case, they offered a refund which doesn't really help.
I may be missing something so this post hoping tosh guru of you might be able to help :)
Thanks in advance,
Night...
Hello
Maybe the image is OK, but the CD/DVD drive cannot read the disc of Arvato.
What you could do is to copy this recovery disk to another disk using another computer.
Then you could try to start the device using the new disc copied.
May be worth a try.In addition, you can try after workaround:
Go to BIOS and check secure boot settings and the boot mode.
What are the settings appear in the BIOS?I m application because you said you could boot from Win 7 disk, in this case secure boot must be disabled and the boot mode must be set between UEFI and MSC mode.
In case you want to install Win 8 secure boot must be enabled a UEFI should be used
-
You cannot start managed server.
Hi all
After you create a cluster supported SOA with scripts DOMAIN_HOME/bin/config.sh, we started the managed server, butThe managed server cannot be started correctly with the following errors.
In addition, the Member Server 10.232.9.3 mentioned in the error log is not configured in my group and I don't know where is the machine.
Please give me a helping hand for this problem. Thank you.
< 21 April 2011 1:13:51 AM PDT > < error > < coherence > < BEA-000000 > < 2011 - 04 - 21 01:13:51.007 Oracle coherence GE 3.3.2/391 < error > (thread = Cluster, Member = n/a): this member was unable to join the cluster due to incompatibility between the Protocol of cluster used by this member and one used by the rest of the cluster. This is probably caused by an incompatibility of versions of coherence or protocol filters do not match (for example compression or encryption). Rejected by Member(Id=2, Timestamp=2011-03-24 16:35:05.581, Address=*_10.232.9.3:8088_*, MachineId=60163, Location=site:us.oracle.com,machine:adc6260153,process:7787, Role=WeblogicServer). >
< 21 April 2011 1:13:51 AM PDT > < error > < oracle.integration.platform.blocks.deploy.coordinator > < BEA-000000 > < Cluster communication initialization failed. If you are using multicast, please make sure that multicast is enabled on your network and that there is no interference on the address in use. See the documentation for more details.
java.lang.RuntimeException: could not start the Service 'Cluster' (ServiceState = SERVICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:73)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:317)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:5)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:951)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:707)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:679)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:864)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:277)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:689)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:667)
at oracle.integration.platform.blocks.cluster.CoherenceClusterInterfaceImpl.getNamedCacheForCluster(CoherenceClusterInterfaceImpl.java:140)
to oracle.integration.platform.blocks.cluster.CoherenceClusterInterfaceImpl. < init > (CoherenceClusterInterfaceImpl.java:84)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:100)
at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:61)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:877)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:839)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:440)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.ConstructorResolver.instantiateUsingFactoryMethod(ConstructorResolver.java:287)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateUsingFactoryMethod(AbstractAutowireCapableBeanFactory.java:903)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:817)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:440)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.aop.framework.ProxyFactoryBean.freshTargetSource(ProxyFactoryBean.java:577)
at org.springframework.aop.framework.ProxyFactoryBean.getSingletonInstance(ProxyFactoryBean.java:306)
at org.springframework.aop.framework.ProxyFactoryBean.getObject(ProxyFactoryBean.java:243)
to org.springframework.beans.factory.support.FactoryBeanRegistrySupport$ 1.run(FactoryBeanRegistrySupport.java:121)
at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.doGetObjectFromFactoryBean(FactoryBeanRegistrySupport.java:116)
at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.getObjectFromFactoryBean(FactoryBeanRegistrySupport.java:91)
at org.springframework.beans.factory.support.AbstractBeanFactory.getObjectForBeanInstance(AbstractBeanFactory.java:1288)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:275)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.getBeansOfType(DefaultListableBeanFactory.java:308)
at org.springframework.context.support.AbstractApplicationContext.getBeansOfType(AbstractApplicationContext.java:947)
at org.springframework.context.support.AbstractApplicationContext.registerListeners(AbstractApplicationContext.java:701)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:377)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
Published by: zjw April 21, 2011 01:37
Published by: zjw April 21, 2011 02:08
Published by: zjw April 21, 2011 02:13In your setDomainEnv.sh, you have to:
-Dtangosol.coherence.clusteraddress and - Dtangosol.coherence.clusterport?
If you have not changed these values, then probably your server is trying to join some other cluster consistency. Your values must be unique.
-
Title says it all... Lost 3 days finding what the problem was.
The version of Eclipse plug-ins, Oracle 1.3.0.200909171310
is completely impossible to a 10.3.1.0 Server version.
The server starts correctly on the command line.
In Eclipse the server instance and the runtime are created correctly, but when you
try to start from bang eclipse!
Cannot commit the WebLogic domain. Please ensure that the Runspace of WebLogic is a Management Server
java.lang.Exception:
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.validateRemote(WlsJ2EEDeploymentHelper.java:1670)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.validateRemote(WeblogicServerBehaviour.java:2647)
at oracle.eclipse.tools.weblogic.server.internal.ServerWatcher.runOnce(ServerWatcher.java:574)
at oracle.eclipse.tools.weblogic.server.internal.ServerWatcher.run(ServerWatcher.java:482)
at java.lang.Thread.run(Thread.java:619)The message instantly, as in 0.5 seconds, it seems anything is still carried out.
StackTrace in the eclipse Log tree: another server is detected.You have a server running in the background, WLS who happens to have the same port as the new admin server.
Try to find the Java process using the Windows taskbar, or better, Manager Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx)
Kill it and try to restart the new server. -
Cannot start Windows Server R2 2012 after sysprep
Hello!
I wanted to create a complete picture of my operating system (Windows Server 2012 R2) with installed applications and configuration done, so I ran sysprep to prepare my system for Imaging. But I chose a reboot instead of the stop option option and now my system is unable to start. Basically it stuck on the location screen (with adjustment for keyboard and so on), when I click on 'Next' nothing happens, what I can see "apply these settings" but it looks like she never applies.
What can I do to solve this problem without reinstallation of the system?
P.S. I have no backup :( I know, it's really stupid and maybe my fatal mistake, but now it's a good lesson for me...
Thanks in advance!
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
He was executed last night but guess it crashed and now if I try to start using applmgr account I get error in the log file.
the database and listener are on the rise.
/ ebs/oracle/SCREWS/inst/apps/VIS_sunny/admin/scripts CD.
departure de./adapcctl.sh $
You are running version 120.7.12010000.2 adapcctl.sh
From OPMN managed instance Oracle HTTP Server (OHS)...
adapcctl.sh: exit with status 150
adapcctl.sh: check the logfile /ebs/oracle/VIS/inst/apps/VIS_sunny/logs/appl/admin/log/adapcctl.txt for more information...
-log file States
09/05/13-13: 59:07: adapcctl.sh version 120.7.12010000.2
09/05/13-13: 59:07: adapcctl.sh: from OPMN if it does not work
opmnctl: opmn is already running.
09/05/13-13: 59:07: adapcctl.sh: Startup OPMN managed instance OSH
opmnctl: from opmn managed the process...
================================================================================
opmn sunny = id: 6200
No process or applications corresponding to this request
09/05/13-13: 59:08: adapcctl.sh: exit with status 150
================================================================================
Please make sure you have the password correct apps when you run the automatic configuration service.
If R12 is installed on Solaris and your client host name is "sunny.localdomain" so why you used "sunny.localdomain" in the URL of the application?
Once you run the AutoConfig successfully, bouncing the services and then check.
Thank you
Hussein
-
Cannot start Essbase Server 11.1.2.1.0 deployment
I just deployed and configured successfully Hyperion EPM Foundation services, planning and Essbase 11.1.2.1.0 on 1 computer with Windows 2008 R2 x 64. However I don't find Hyperion Essbase service in the Windows services window.
Why the service was not created and how to create a service of Essbase in Windows?
How can I run Essbase server manually? Beats which file I should start to do this?
Thank you very much!Just to add, you should see a service like - http://4.bp.blogspot.com/__2AaArK5lW8/S9XELHQIjpI/AAAAAAAACQc/lYrFpiqKJIk/s1600/18.png
You can also control the essbase using OPMN agent for example http://4.bp.blogspot.com/__2AaArK5lW8/S9XDu1xtpgI/AAAAAAAACPE/s4YWo2GlNHw/s1600/29.pngAnd you can use the following commands
opmnctl startproc ias-component = EssbaseInstanceName
opmnctl restartproc ias-component = EssbaseInstanceName
opmnctl stopproc ias-component = EssbaseInstanceNameIf you type opmnctl, then you should see all available commands
See you soon
John
http://John-Goodwin.blogspot.com/ -
Cannot start OM Server Administrator (entry point not found)
All of a sudden when I try to open the Dell server administrator, I get the following message:
omastart.exe - Entry Point not found
The procedure entry point xmlParseFile could not be located in the dynamic link library libxml2.dll.
I can browse to the server administrator manually entering an address bar https://localhost:1311.
I tried to install the latest version over the existing version with no luck.
Any ideas?
Thank you.
If you don't want to waste his time with the new shortcuts or by setting the PATH variable, here's a possible solution:
Access \shared\bin [Server Administrator installation folder].
Copy the files in this folder to % windir%\system32.
Brian
-
He cannot start Admin Server!
I installed Essbase 11.1.2.1 on my laptop
window 7 ulitmate 4 GB of ram and 500 GB hard drive
I turn off the firewall
I could see the essbase database
then I rebooted the laptop
back on the fire wall
and now
When I add the server administrator
localhost
It does not connect =
localhost arrested
Stopped Nextlevel-pc
Nextlevel - pc:1521 Stopped
When I use the command line Client
the error I get is
CPL - commucation network with server failed
sys - jave.net.commectException: Connection Refused: Connect
I again this morning tried to connect and am unable
Please notify
Published by: level following November 10, 2011 16:21
Published by: level following November 11, 2011 03:10Have you checked the logs of the EAS,
user_projects\epmsystem1\diagnostics\logs\services See you soon
John
http://John-Goodwin.blogspot.com/ -
I install the spilitter of bandwidth for isa server 2006 after the stoped.i of the microsoft firewall service cannot start this service and I take the error 1068-how do I do?
Hello
Your question is beyond the scope of these forums.
Please use the following links for that matter.
Network Infrastructure servers Forum:
http://social.technet.Microsoft.com/forums/EU/winserverNIS/threadsCategory of the Windows Server:
http://social.technet.Microsoft.com/forums/EU/category/WindowsServerConcerning
-
Windows Media Center Gets error: invalid Application - cannot start
Windows Media Center (of the month last Vista 32-Bit)
I have problems to make internet TV, news and Netflix to connect to the internet when you use Windows Media Center. They are all under the TV + movies option during the WMC. I get an error saying [invalid Application - cannot start "" ""]. Not sure if this is because the internet connection that I use is not one that has a user name or password. Not know how to configure it for this version of Windows. I don't get this problem when you use Windows Media Center in Windows 7.
At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).
http://social.answers.Microsoft.com/forums/en/vistapictures/thread/ea536e68-5903-444C-8d10-6bd9fa936dc9"Invalid application-unable to launch" Windows Media Center - MSNBC.com
http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/18c69d9b-e93d-4350-A17C-15ef9ae7d76f"Has anyone, using windows vista ultimate media center, was a 'failed to launch'"demand invalid." »
http://Askville.Amazon.com/Windows-Vista-Ultimate-Media-Center-unable-launch-invalid-application/AnswerViewer.do?RequestId=2894719I guess that set up WMC is identical in both Vista and Windows 7?
http://www.Microsoft.com/Australia/Windows/Windows-Media-Center/Your firewall is blocking access to the WMC?
-
Original title: Media sharing between Samsung Galaxy Tab and Windows Media Player 11
Why my Windows Media Player 11 share media with my Samsung Galaxy Tab? As soon as it connects and I try to play a movie, I get an error message no connection or connection to server lost. What can I do to share multimedia files on my Galaxy Tab without getting this message?
Hi SylviaSkeeter,
(1) if it works well before?
(2) remember to make changes?
(3) how you try to sync or share media?
(4) what is you receive the exact error message?
You can use the software provided by Samsung to sync media, or you can use Windows Media Player.
Method 1: Disable the security software and verify afterwards; Follow the steps mentioned in the link below
Disable the antivirus software
If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.
Important: Re activate security software once everything is done.
Method 2: See the steps mentioned in the link below that relates to a similar question
The problems of synchronization
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-sync-problems
For more information, please visit the links below
Set-up-a-device-to-sync-in-Windows-Media-Player
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player
You cannot share media between Windows Media Player 11 and DMR such as Xbox 360
-
No sound, cannot start Windows Audio Endpoint Builder service, RPC server not available
I had the audio works fine, so I checked a few services that are sure to value manual, and now I have problems with my audio. I went to all the necessary services that should be started and all have the value automatic and running except for the Audio service of builder endpoint, windows audio service and service audio creative.
When you try to start the audio endpoint Builder service windows I get error 1722: the RPC server is unavailable.
I can't start the service windows audio either. I get an error 1068: the dependency service or group could start.
I tried to change the local system account log in info and now I get a different error message: 1079 the account specified for this service is different from the account specified for other services running in the same process.
I tried to uninstall my sound card drivers (creative audigy 2), my pilots on board her (AC97) then reinstalling both, no chance.I am running Win 7 Ultimate 64
I am also having a problem with my USB keyboard goes dead. the backlight stays on, but none of the buttons will respond. I have to unplug the USB and use it to hold back in order to reinstall. It seems that if I do not use the keyboard for a while it turns off, but the lighting. I disabled in the power of USB energy saving profile, and the problem persists. My mouse does not turn, so I think it is not related to my power profile. It's a keyboard Saitek Gamers (USB).
Any help would be appreciated.
Thank you
AlexETA *.
DCOM Server process Launcher started, automatic
Plug-and-Play started, automatic
Multimedia class Scheduler started, automatic
Remote procedure call (RPC) started, automatic
Windows Audio Endpoint Builder not started, automatic (error message 1722)Update #2 that I was able to get the right connection info to get rid of the error msg 1079.
I typed in NT AUTHORITY\LocalService and left the empty password.
now, I get the same msg of error as a generator of endpoint... RPC server is unavailable.Edit # 3
I turned on the power and everything started working as usual.
except that I still have the problem of keyboard.
Thank youI guess the problem with the Windows Audio endpoint builder, it's that you have disabled the Windows on Windows 7 power management. For some reason, the audio services cannot start if power management is disabled.
I was going to install the software for my UPS APC power management and requires that the Windows power management is disabled. I disabled the service and rebooted the system and noticed that the audio services is not started. You try to start their hand gave the errors you mentioned. When I started the service of power management, I was able to start audio services.
Microsoft does not mark as services that depend on it, but there is a relationship. I know that in Windows 7, which they said he optimized use of energy for the audio and I guess audio services are looking at power management to see what type of profile is in use. Because power management does not work, it is unavailable and terminate the audio services. Again, this is just a guess, and I can't find definitive answers to this topic.
Maybe you are looking for
-
How can I use other companion DAQmax and data acquisition in labview code?
Hello I'm new in labview and want to combine four different codes of labview and run them at the same time. I use my data acquisition PCI-6071E and BNC-2120. I want to send an analog output (flat DC signal) to control a blower, an analog volmetre to
-
If I have 2 routers when I connect 2 LAN to LAN or WAN router connection LAN router?
If I have 2 routers when I connect 2 LAN to LAN or WAN router connection LAN router?
-
Original title: my internal MIC does not work... .. I get a message saying that my sound card is not detected... all of a sudden... Is - fixable without buying anything?
-
My laptop does not completely load
I have windows vista and the computer starts up and goes to my homescreen but finish loading so I can't really do anything. I tried to restore but made sure he will not load even that much more. What should I try now?
-
C:\Users\owner\AppData\Local\egaluxocaciris.dll
I get this error message after Windows starts.