You cannot start managed server.
Hi allAfter you create a cluster supported SOA with scripts DOMAIN_HOME/bin/config.sh, we started the managed server, butThe managed server cannot be started correctly with the following errors.
In addition, the Member Server 10.232.9.3 mentioned in the error log is not configured in my group and I don't know where is the machine.
Please give me a helping hand for this problem. Thank you.
< 21 April 2011 1:13:51 AM PDT > < error > < coherence > < BEA-000000 > < 2011 - 04 - 21 01:13:51.007 Oracle coherence GE 3.3.2/391 < error > (thread = Cluster, Member = n/a): this member was unable to join the cluster due to incompatibility between the Protocol of cluster used by this member and one used by the rest of the cluster. This is probably caused by an incompatibility of versions of coherence or protocol filters do not match (for example compression or encryption). Rejected by Member(Id=2, Timestamp=2011-03-24 16:35:05.581, Address=*_10.232.9.3:8088_*, MachineId=60163, Location=site:us.oracle.com,machine:adc6260153,process:7787, Role=WeblogicServer). >
< 21 April 2011 1:13:51 AM PDT > < error > < oracle.integration.platform.blocks.deploy.coordinator > < BEA-000000 > < Cluster communication initialization failed. If you are using multicast, please make sure that multicast is enabled on your network and that there is no interference on the address in use. See the documentation for more details.
java.lang.RuntimeException: could not start the Service 'Cluster' (ServiceState = SERVICE_STOPPED, STATE_ANNOUNCE)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:73)
at com.tangosol.coherence.component.net.Cluster.onStart(Cluster.CDB:317)
at com.tangosol.coherence.component.net.Cluster.start(Cluster.CDB:11)
at com.tangosol.coherence.component.util.SafeCluster.startCluster(SafeCluster.CDB:3)
at com.tangosol.coherence.component.util.SafeCluster.restartCluster(SafeCluster.CDB:5)
at com.tangosol.coherence.component.util.SafeCluster.ensureRunningCluster(SafeCluster.CDB:26)
at com.tangosol.coherence.component.util.SafeCluster.start(SafeCluster.CDB:2)
at com.tangosol.net.CacheFactory.ensureCluster(CacheFactory.java:951)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:707)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:679)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:864)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:277)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:689)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:667)
at oracle.integration.platform.blocks.cluster.CoherenceClusterInterfaceImpl.getNamedCacheForCluster(CoherenceClusterInterfaceImpl.java:140)
to oracle.integration.platform.blocks.cluster.CoherenceClusterInterfaceImpl. < init > (CoherenceClusterInterfaceImpl.java:84)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:100)
at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:61)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:877)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:839)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:440)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.ConstructorResolver.instantiateUsingFactoryMethod(ConstructorResolver.java:287)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateUsingFactoryMethod(AbstractAutowireCapableBeanFactory.java:903)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:817)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:440)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveManagedList(BeanDefinitionValueResolver.java:287)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:126)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.aop.framework.ProxyFactoryBean.freshTargetSource(ProxyFactoryBean.java:577)
at org.springframework.aop.framework.ProxyFactoryBean.getSingletonInstance(ProxyFactoryBean.java:306)
at org.springframework.aop.framework.ProxyFactoryBean.getObject(ProxyFactoryBean.java:243)
to org.springframework.beans.factory.support.FactoryBeanRegistrySupport$ 1.run(FactoryBeanRegistrySupport.java:121)
at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.doGetObjectFromFactoryBean(FactoryBeanRegistrySupport.java:116)
at org.springframework.beans.factory.support.FactoryBeanRegistrySupport.getObjectFromFactoryBean(FactoryBeanRegistrySupport.java:91)
at org.springframework.beans.factory.support.AbstractBeanFactory.getObjectForBeanInstance(AbstractBeanFactory.java:1288)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:275)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveReference(BeanDefinitionValueResolver.java:269)
at org.springframework.beans.factory.support.BeanDefinitionValueResolver.resolveValueIfNecessary(BeanDefinitionValueResolver.java:104)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyPropertyValues(AbstractAutowireCapableBeanFactory.java:1245)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.populateBean(AbstractAutowireCapableBeanFactory.java:1010)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:472)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
at org.springframework.beans.factory.support.DefaultListableBeanFactory.getBeansOfType(DefaultListableBeanFactory.java:308)
at org.springframework.context.support.AbstractApplicationContext.getBeansOfType(AbstractApplicationContext.java:947)
at org.springframework.context.support.AbstractApplicationContext.registerListeners(AbstractApplicationContext.java:701)
at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:377)
at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255)
at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199)
at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45)
to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1863)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3126)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1512)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:486)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:1267)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:409)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
Published by: zjw April 21, 2011 01:37
Published by: zjw April 21, 2011 02:08
Published by: zjw April 21, 2011 02:13
In your setDomainEnv.sh, you have to:
-Dtangosol.coherence.clusteraddress and - Dtangosol.coherence.clusterport?
If you have not changed these values, then probably your server is trying to join some other cluster consistency. Your values must be unique.
Tags: Fusion Middleware
Similar Questions
-
Problem starting managed server and Node Manager
Hello
I created the WebLogic domain with 2 managed servers. I use Jdevevloper11.2.3 integrated WebLogic server. I can't start the servers ManagedWebLogic. On the console, I get an error stating:
"For the server Server1, the Node Manager associated with new_Machine_1 of the machine is not accessible."
Nor any of the management server is started through the startManagedWebLogic.cmd. Any help on this?
Hello
To start the managed from the console server, you must first start the node Manager process and then you can start managed based on the console server.
Find the link to the screenshot of how to configure Nodemanager and start the managed server.
NODE MANAGER configuration and starting managed server from Console - weblogicexpert
To start the managed break with start-up follow the link below Scrip.
Starting/Stoping Weblogic Managed Server - weblogicexpert
It may be useful
-
SE PermSize: Memorry error starting managed server
Dear all,
I have installed SOA 11.1.1.3 version on my PC (running windows XP sp2, 4 GB of Ram). Installtion is filled sucesfully. I started weblogic Admin server and Server Manager. Admin Server is started successfully. "" But server manager does not start, and in the newspapers, it is shwoing as Momery "PermSize: Cache.
So can you please someone help me to solve this problems.
Kind regards
yearsYes that's correct.
You can start the server like this: startManagedServer.cmd
If you have set the JAVA_VENDOR as Oracle, then you should have installed JRockit. Otherwise it will fail to start.
-
Title says it all... Lost 3 days finding what the problem was.
The version of Eclipse plug-ins, Oracle 1.3.0.200909171310
is completely impossible to a 10.3.1.0 Server version.
The server starts correctly on the command line.
In Eclipse the server instance and the runtime are created correctly, but when you
try to start from bang eclipse!
Cannot commit the WebLogic domain. Please ensure that the Runspace of WebLogic is a Management Server
java.lang.Exception:
at oracle.eclipse.tools.weblogic.server.internal.WlsJ2EEDeploymentHelper.validateRemote(WlsJ2EEDeploymentHelper.java:1670)
at oracle.eclipse.tools.weblogic.server.internal.WeblogicServerBehaviour.validateRemote(WeblogicServerBehaviour.java:2647)
at oracle.eclipse.tools.weblogic.server.internal.ServerWatcher.runOnce(ServerWatcher.java:574)
at oracle.eclipse.tools.weblogic.server.internal.ServerWatcher.run(ServerWatcher.java:482)
at java.lang.Thread.run(Thread.java:619)The message instantly, as in 0.5 seconds, it seems anything is still carried out.
StackTrace in the eclipse Log tree: another server is detected.You have a server running in the background, WLS who happens to have the same port as the new admin server.
Try to find the Java process using the Windows taskbar, or better, Manager Process Explorer (http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx)
Kill it and try to restart the new server. -
Cannot start web server on the executable file
Hello
We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.
As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.
I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.
When executing:
- The code will sit in the while loop until I press stop.
- Web server: Active Server = FALSE
- Out error = ERROR No.
In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">50ms>
It's the ini file to the executable file:
[WebTest]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
server.tcp.serviceName = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.Enabled = True
WebServer.TcpAccess = "' + * '"
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = FalseAnd it is the Web server configuration file:
ErrorLog "$LVSERVER_ROOT/logs/error.log".
LogLevel 3
The default server name
DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
Listen 8000
ThreadLimit 10
TypesConfig "$LVSERVER_ROOT/mime.types»
DirectoryIndex index.html
LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
LoadModule LVAuth lvauthmodule
LoadModule LVSnapshot lvsnapshotmodule
LoadModule LVRFP lvrfpmodule
LoadModule dir libdirModule
LoadModule copy libcopyModuleAddHandler LVAuthHandler
AddHandler LVSnapshotHandler .snap
AddHandler LVRFPHandlerAddHandler dirHandler
AddHandler copyHandler"CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
KeepAlive on
KeepAliveTimeout 60
Timeout 60As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?
I tried the things:
- Copy a new default configuration file before the entry into force
- Writing a predefined file (encoded) before initializing config
- Definition to root before initializing directory (it actually generates an error because the server is not active...)
- Set WebServer.Active = TRUE several times inside the while loop
- Toggle the web server in the ini file
System:
- LabVIEW 2010
- PC with Windows 7 running
Thanks for any help, because it makes me crazy slow!
Ben
Hi Marco, thanks for the reply.
I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!
If anyone is interested, here's the problem:
The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!
This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.
AND
You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.
The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup
-
SDELETE and now I cannot start my server.
I ran SDELETE last night and now I have no space on my VMDK and cannot start a virtual machine. Unfortunately it is a VMDK 1.9 on a LUN 1.9 TB tuberculosis. I had 450 GB free before the SDelete. This morning, my VM showed 75GB but funded space shows 4 TB. The SAN now shows 0bytes available and my vmdk looks like it's running a cliché, but I don't have everything clings to remove.
Someone at - it suggestions?
If the virtual disk, two of which appear in the settings of the virtual machine is ' EGI - GMEDIIS.vmdk ' and ' EGI - GMEDIIS_1.vmdk ", so I guess that"EGI-GMEDIIS_1 - 000002.vmdk"has been one of the virtual disks that you have replaced in the settings of the virtual machine, and so it is obsolete now. However, in order to ensure that it is being used more you can stop the virtual machine, move back "EGI-GMEDIIS_1 - 000002.vmdk" to a new subdirectory and power on the virtual machine. If it works, you can safely delete the subdirectory with the now obsolete hard file.
André
-
Logging.XML file resets after you restart the managed server
Hi all
I modified the logging.xml file because I implemented a Logger.But ADF custom after you restart the server, SOA, logging.xml file get automatically back to the unmodified state, all this means that I modified was not.
Am I missing something?
Please suggest!
Kind regards
ShahHi Shah
In the EPS group, usually there is a set of Configuration files are synchronized to all of AdminServer breaks the run. A simple example is like file config.xml and some files of data sources, files, ldap, etc. Whenever we reboot the Soa or bam managed servers, they go to AdminServer and obtain a copy of these files. So, if you make any changes directly on the managed server computers, then can be is getting crushed when you restart the servers. Check the timestamp of all these files. Make the changes on the side means Admin on the machine where you have AdminServer running. If all goes well, soa/bam should get these files at startup.Thank you
Ravi Jegga -
From CC (photoshop etc) revealed the Adobe Application Manager
Application of sign-in
Sign - managed
Thank you for the screen and continiue...
To the Adobe Application Manager
Demand never starts
Registration and payments are OK, it worked before.
Someone an idea?
Hi all
Could you please try the following steps, depending on your operating system:
Windows:
- Uninstall Acrobat (whether as a standalone installation or as a component of your Creative Suite installation)
- Run the Acrobat cleaning tool to remove remnants of the request.
- Reinstall Acrobat X via Adobe Application Manager (creative cloud subscribers) or your Installer CS6
Mac:
- Uninstall Acrobat (Please check the Applications\Adobe Acrobat\Uninstall and Applications\Utilitaires installers for Acrobat uninstall programs available)
- Run the CSCleaner tool and remove Acrobat.
- Reinstall Acrobat X via Adobe Application Manager (creative cloud subscribers) or your Installer CS6
Concerning
Baudier
-
He was executed last night but guess it crashed and now if I try to start using applmgr account I get error in the log file.
the database and listener are on the rise.
/ ebs/oracle/SCREWS/inst/apps/VIS_sunny/admin/scripts CD.
departure de./adapcctl.sh $
You are running version 120.7.12010000.2 adapcctl.sh
From OPMN managed instance Oracle HTTP Server (OHS)...
adapcctl.sh: exit with status 150
adapcctl.sh: check the logfile /ebs/oracle/VIS/inst/apps/VIS_sunny/logs/appl/admin/log/adapcctl.txt for more information...
-log file States
09/05/13-13: 59:07: adapcctl.sh version 120.7.12010000.2
09/05/13-13: 59:07: adapcctl.sh: from OPMN if it does not work
opmnctl: opmn is already running.
09/05/13-13: 59:07: adapcctl.sh: Startup OPMN managed instance OSH
opmnctl: from opmn managed the process...
================================================================================
opmn sunny = id: 6200
No process or applications corresponding to this request
09/05/13-13: 59:08: adapcctl.sh: exit with status 150
================================================================================
Please make sure you have the password correct apps when you run the automatic configuration service.
If R12 is installed on Solaris and your client host name is "sunny.localdomain" so why you used "sunny.localdomain" in the URL of the application?
Once you run the AutoConfig successfully, bouncing the services and then check.
Thank you
Hussein
-
Cannot start Windows Server R2 2012 after sysprep
Hello!
I wanted to create a complete picture of my operating system (Windows Server 2012 R2) with installed applications and configuration done, so I ran sysprep to prepare my system for Imaging. But I chose a reboot instead of the stop option option and now my system is unable to start. Basically it stuck on the location screen (with adjustment for keyboard and so on), when I click on 'Next' nothing happens, what I can see "apply these settings" but it looks like she never applies.
What can I do to solve this problem without reinstallation of the system?
P.S. I have no backup :( I know, it's really stupid and maybe my fatal mistake, but now it's a good lesson for me...
Thanks in advance!
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
IP has changed, you cannot start the listener
Hi all
I went to the machine that manages a quick installation of Ebiz R12.1.1 recently, which means that a new IP address has been assigned.
I've updated the hosts file, but now when I try to set up the listener that I get an error message indicating the name of the listener is missing in the listener.ora file.
AMT-01151: lack of name of the listener, SCREWS, listener. ORA
Hosts
192.168.56.101 oel63.localdomain oel63
127.0.0.1 localhost.localdomain localhost
Listener.ora
SCREW =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST) = oel63.localdomain) (PORT = 1576))
)
)
SID_LIST_VIS =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = u01/ebs/R12VIS/db/tech_st/11.1.0)
(SID_NAME = SCREW)
)
)
tnsnames.ora
SCREW =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp (PORT = 1576))(HOST=oel63.localdomain))
(CONNECT_DATA =
(SID = SCREW)
))
Don't know what else I'm supposed to do. For me, the TNSNAMES and RECIPIENT have the correct information. Nothing has changed since it worked correctly until now.
Any help would be greatly appreciated.
See you soon,.
Russell H.Russell H. wrote:
Hello
Oracle Linux 6 on a virtual machine, Windows 7 64 bit host
The virtual machine itself is always on the same server computer, but the router it's IP has changed and new ranges if necessary.
Thinking about it now, I could have gotten the same IP address, but now I have a new, and I don't remember the old IP that has been assigned.I did update the file hosts with the new IP address.
See you soon,.
Russ Hhttps://forums.Oracle.com/forums/search.jspa?threadID=&q=change+and+IP+and+address&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
https://forums.Oracle.com/forums/search.jspa?threadID=&q=change+and+IP+and+address+and+FND_NODES&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001Thank you
Hussein -
Cannot start Essbase Server 11.1.2.1.0 deployment
I just deployed and configured successfully Hyperion EPM Foundation services, planning and Essbase 11.1.2.1.0 on 1 computer with Windows 2008 R2 x 64. However I don't find Hyperion Essbase service in the Windows services window.
Why the service was not created and how to create a service of Essbase in Windows?
How can I run Essbase server manually? Beats which file I should start to do this?
Thank you very much!Just to add, you should see a service like - http://4.bp.blogspot.com/__2AaArK5lW8/S9XELHQIjpI/AAAAAAAACQc/lYrFpiqKJIk/s1600/18.png
You can also control the essbase using OPMN agent for example http://4.bp.blogspot.com/__2AaArK5lW8/S9XDu1xtpgI/AAAAAAAACPE/s4YWo2GlNHw/s1600/29.pngAnd you can use the following commands
opmnctl startproc ias-component = EssbaseInstanceName
opmnctl restartproc ias-component = EssbaseInstanceName
opmnctl stopproc ias-component = EssbaseInstanceNameIf you type opmnctl, then you should see all available commands
See you soon
John
http://John-Goodwin.blogspot.com/ -
argument null for classes starting managered Server start
Hello world
We have a cluster Weblogic 10.3.5 environment. the environment seems to work very well. I am able to have servers (Admin and managed) and deployed applications that run without any problem. However, I just noticed, every time when I run servers Managered, I got the following in the system log. It seems that they are the classes start, but with the null argument. Are they normal or not?
Thanks in advance,
John
# < 22 February 2012 11:28:27 EST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928107258 > < BEA-000256 > < Invoking oracle.dms.wls.DMSShutdown.main (null) >
# < 22 February 2012 11:28:27 EST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928107769 > < BEA-000256 > < Invoking oracle.ias.cache.Shutdown.main (null) >
# < 22 February 2012 11:40:08 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928808600 > < BEA-000256 > < Invoking oracle.jrf.wls.JRFStartup.main (null) >
# < 22 February 2012 11:40:08 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928808682 > < BEA-000256 > < Invoking oracle.security.jps.wls.JpsWlsStartupClass.main (null) >
# < 22 February 2012 11:40:08 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928808790 > < BEA-000256 > < Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main (null) >
# < 22 February 2012 11:40:17 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928817314 > < BEA-000256 > < Invoking oracle.jrf.AppContextStartup.main (null) >
# < 22 February 2012 11:40:17 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928817318 > < BEA-000256 > < Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main (null) >
# < 22 February 2012 11:40:17 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928817432 > < BEA-000256 > < Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main (null) >
# < 22 February 2012 11:40:17 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928817492 > < BEA-000256 > < Invoking oracle.ias.cache.Startup.main (null) >
# < 22 February 2012 11:40:17 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928817493 > < BEA-000256 > < Invoking oracle.dms.wls.DMSStartup.main (null) >
# < 22 February 2012 11:40:18 CEST > < Info > < management > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928818207 > < BEA-141278 > < Java configuration entropy is: property system "java.security.egd = null; File JRE java.security "securerandom.source = file:/dev/urandom" property Blocking of the Config = false; Version of the JDK = 1.6.0_26; Operating system = Linux. >
# < 22 February 2012 11:40:48 CEST > < Info > < WebLogicServer > < entwl2u - vm.co.pinellas.fl.us > < Pinellas1uCluster1MS2 > < ExecuteThread [ASSET]: '2' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1329928848987 > < BEA-000256 > < Invoking oracle.security.audit.ajl.loader.JEEAuditLoader.main (null) >Hi John,.
It's Ok. These are only information messages. THERY are not warnings or errors, so nothing to worry.
If the classes are called arguments null and no exception is thrown, and then is means that the class is able to have a null argument, so nothing to worry about again.
Kind regards
Cree -
How Flash the BIOS if you cannot start Windows
Hello
I have a BIOS virus which prevents ANY version of any operating system Windows to boot at all.
(Linux will start and run fine)
So, to solve this problem, I need re-flashing the BIOS.
Problem is... HP offers only the BIOS as an executable Windows utility.
Can someone help me figure out a way to Flash the BIOS WITHOUT Windows?
THX
Now, in response to this topic, I discovered a solution...
HPBIOSFILE.exe - writeromfile /-writehexfile /-writehdrfile
I hope this helps some of you.
To use this...
(1) download the executable file (.exe) for BIOS update for your motherboard
(2) a copy of the program flashing of Award Bios BACK (Google it, easy to find)
(3) obtain a downloadable copy of the BACK 6.22 (of Microsoft) and create files to start this one. (possibly another computer to do this).
(4) start your computer affected in BACK 6.22
(a) copy the files in a directory
"(b) using the bold line above... type the name of your BIOS instead of the HPBIOSFILE.exe file ' and run the command.
You will find yourself with a ROM file, a BIN file and a header file.
You can now re-Flash your BIOS on your HP computer outside of a Windows environment.
ENJOY!
-
How can you put a missing dll file when you cannot start
system32\hal.dll on windows xp home sp3
system32\hal.dll on windows xp home sp3
1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
6. at the end of the output of scan type > press ENTER.
7 restart your computer.If you do not have a Windows Xp disk, follow the instructions HERE to create a drive of the Windows Xp Recovery Console.
Maybe you are looking for
-
I want to top it keep my old passwords, locked out of Bank
My machine keeps my old password. I'm locked out of my Bank. They send me a new password, but I get locked again because it has kept the old one. John Calthorpe
-
I have a HP Pavilion g6 with a game password. As soon as you start looking for a password. I've seen other posts where you have provided a code to bypass the password. My system code is 55268991. Can anyone help with my system?
-
Hello, I need help now. Trying to fix a HP Mini 210-1094NR running Windows 7 Starter. Boots to the Windows error recovery screen that gives me two options. 1. run the Startup Repair tool 2 start Windows normally Well you can guess which do not work.
-
I need to upgrade the CPU on my 6510 b and want to know if it is a relatively simple exercise, swap processors, or if more is involved and needs a "expert" installation Will be the new processor automatically felt. The latest version of the bios inst
-
Help with M6348 connecting to a Cisco network
Hello Can someone help me with best practices by putting R710 via a M6348 stacked with a cisco network. Our configuration is the following M1000e 2 x 1 GB pass-through fabric a 2 x M6348 wired in a pile in the B fabric 6 x popular R710 with four NIC