No actualiza algo en windows don't update sale UN error por favor ayuda

Similar Questions

• Windows XP pro update page 0x8024400A error number

  I'm on my pc Windows XP pro and since I format, distribution it over and over and then re install Windows XP pro again and again (9 or 10 times) in the last week.,.

  I can't work Windows XP update page.

  I get "" error number: 0x8024400A this website has encountered a problem and cannot display the page you are trying to show. ' "

  All suggestions on this site of Microsoft points people he difficulty page.

  How to practice, this will not work unless Windows XP SP3 is installed.

  Is there something silt, then this thing stupid construction of Microsoft, to find the solution on how to solve an error with windows XP pro updates?

  I just don't feel the HD reformatting and waisting my time again and again when I have the same problem each time.

  BTW, someone read this if you have to re install windows XP and plus size your time by signing up immediately as you will certainly have to start over and over again!  MONEY IS good TIME BILL! Laughing out loud

  Hi phoe_nix,

  (1) what is the update that you are trying to install? I would like to the KB article number.
  (2) what are the troubleshooting steps you have tried to solve this problem?
  (3) did you change on your computer recently?

  I suggest to try the steps in the following link and check if it helps.
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144

  Hope this information helps.

• Windows don't update also cannot access the websites for microsoft in normal mode.

  Original title: windows update doesn't

  I just reformated my computer and installed windows xp service pack 1 and my computer will not let me acsess any microsoft Web site unless in safe mode and my updater says I'm not connected to the internet when I use internet explore to navigate the case (except microsoft) I don't have any idea how to solve this

  Start all over again. Follow the instructions in this post of mine in another forum (to-the-letter & in order!) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows don't update not install microsoft updates and I get an error code 643 and I can't install thyem. Can any on help

  It is said that this is a prob with Windows.net framework or microsoft office 2003 thre are updated 3 (kb2533523) (kb2468871) and (kb2539636)

  See Ted_W; s solution

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/kb2539636-fails-to-install-on-Windows-2008-R2-SP1/21b67c10-27be-4336-8745-59f5fb6bc3f3>

  09:20:02 UTC 08/17/11

• iPhone 4 crashed, has entered into recovery mode and don't update or restore (error 4013)

  Hi all

  So, the other day, while watching a YouTube video, my iPhone 4 became unresponsive and turns off. Since then, he has been slain in recovery mode, only showing the "connect to iTunes screen.

  iTunes gives me two options: update or restore. As I wanted to save my data (I have been so sloppy as to not have backed up the device for about a year!) I tried to update a bunch of times. However, it keeps me gives error 4013. Then, having given up this possibility, I also tried to restore the device several times, but unfortunately exactly the same phenomenon occurs.

  What happens is: iTunes downloads and extract the software, says "waiting for iPhone" for a few seconds, then it said "Preparing iPhone software update" because I think little about exactly 15 minutes. Then he said "Waiting for iPhone" still for a few seconds, after which it gives me error 4013.

  My guess is the iPhone automatically leaves the recovery mode so that it gives me this error because after 15 minutes and restarts alone, leaving iTunes to "think" that there is some kind of connection problem or do not recognize the device as being the same when it turns off and turns back on after 15 minutes. If this is the case, perhaps restarting interrupts the update/restore process. Or maybe just crashes in this state of preparation for 15 minutes because he is unable to do what he needs because of a sort of damaging the material.

  What I've tried so far:

  -Update iTunes to the latest version (12.2.2)

  -Updated the software on my Mac (although I must say that it is an old MacBook with OS X 10.7.5; I don't know if it's any factor here)

  -Restarting my computer

  -Switch to the other USB port

  -Using another USB cable (although the one alternative that I have is not in very good condition)

  -Try on a friend's computer (a much newer MacBook; I don't know what operating system well)

  -Force the device to restart a package of time (now the power and the home buttons)

  -A few third-party applications that claim to be able to get the iPhone out of recovery mode

  Any of you have ideas, ideas or suggestions on what is the cause and how can I get my phone back to life again? Recover my data would be obviously ideal, but I would also be very happy with just equipped with a device of work once again. I know it's an obsolete phone but it has always worked well.

  Thank you in advance for your help!

  Anyone? I could really use some help. Thank you!

• (KB2378111, 12.0 MB, published 12/10/10) for Windows Vista security update failed with error 800b0100.

  Update of security (KB2378111, 12.0 MB, published 12/10/10) for Win Vista failed with the error 800b0100. Failure of several attempts, power, played external parser M.S., downloaded System Update Readiness Tool, saved the file on the desktop to install proxy server disabled by bike. Nothing has worked.

  Start a help tickethttp://support.microsoft.com/common/international.aspx?rdpath=1&gprid=9860>

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:https://support.microsoft.com/oas/default.aspx?gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  OPTION has:

  • 1. open IE 32-bit (only) to https://consumersecuritysupport.microsoft.com/

    2. click on security updates aren't installed properly

    3. on the resulting page, click CONTINUE

    4. Select an appropriate country and language, and then click CONTINUE

    5. click on the option support by PHONE or email.

    OPTION B:

    Start an email from Windows Update support incident request for free

    https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

• Windows 7 insstallation updates fail. Error code 80070643

  Hello. My new laptop has just 8 days with Windows 7 Premium. Now, updates fail with the error code 80070643.
  Service packs: Office 2003 SP3. KB907417. KB975958.
  Until yesterday, updates have been working well and I have sucessfully made many updates when I first got 29. Nov.
  I have re-installed C: drive from a backup created on 2 December when updates have been successful, but still do not work.
  How can I get going again?
  Really need help.
  Thank you. Stoker Wilson.

  Thank you. I uninstalled Office 2003, then began to re - install the modules one by one, from Outlook. Update was necessary after that one facility and took place normally.  Do not know why. I will keep your information in case the problem comes up again. Thank you.

• When I try to download sp1a for windows xp to update I get error message cannot conect to the server. What can I do

  I have windows xp. She badly needs updating. What is the most simple and quick way to update?

  Hi Lynmiller,

  ·         You install the service pack through Windows Update?

  If so, you can try to install the update manually and check if it helps. In addition, it is important that you install SP3 because this update contains several other important updates and security updates.

  Step 1: To install SP3, you must first have Windows XP Service Pack 1a (SP1a) or Service Pack 2 (SP2) installed.

  Download details: Windows XP Service Pack 1a Express installation

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=19751

  Step 2: Follow this link to install Service Pack 3.

  Learn how to install Windows XP Service Pack 3 (SP3)

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  I hope this helps.

• Windows keep stop updates of certificate errors. How should I do?

  I can't update Windows Vista. I can not down load security software. I can't display a page about half the time without certificate errors.

  What should I do to fix this?

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  _______________________________________________________________

  and make sure that your computer is malware free

  an anti-virus can not find any problems

  you need to scan with a good anti-malware program

  Download update and scan with the free malwarebytes anti-malware version

  http://www.Malwarebytes.org/MBAM.php

  _________________________________________________________________

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Windows defender-implementation update KB915597 (8007007E error code)

  My windows Defender does not work either I can enable my control panel. There is the message error code 8007007E. I have a Dell Studio 64-bit computer. Windows 7. How can I activate my windows Defender. My browsers are Firefox and IE. Thank you for your attention to this issue.

  You use AVG, McAfee, MSE or Norton antimalware?  If so, Windows Defender must be disabled on the Vista or Win 7 operating system and should be uninstalled on a Win XP OS.  If you try to activate Windows Defender and it has been disabled by one of these programs, this is what is causing your error code.

  The following thread made refers to using MSE and Windows Defender, but also applies to the AVG, McAfee and Norton:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/Windows-Defender-and-Microsoft-Security-Essentials/5309cb8d-02e1-40E8-974f-0dcedb9ab9fd

• Windows Vista says that it cannot install updates and quote error code 800070490 - please advise.

  I have Windows Vista and get a message saying that Windows cannot install updates, citing the error code 800070490.   Can advise you on a solution, please?

  http://support.Microsoft.com/kb/958044

• Windows don't get actualiza y appears error code 80070005 cuando trato search plots

  Windows don't get actualiza y appears error code 80070005 cuando trato search plots

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  I had a windows update error 800736B 3... and I've done sfc scan I got error WFP resourse found corrupt files but unable to fix some problem... so please me cum on this problem

  If the SFC does not a repair installation should work.
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.HTML?filter>

• What happens if I don't update updated security in my Windows Update

  I had a lot of conflicts with windows update in the past and got these errors B.S without reason and had to spend days on end, trying to fix it. Help tech responds that he fixed, but now, years later, I can't update Java, I can't update Adobe Air, now it's 6 update windows with a stupid mistake again. I have no idea to solve my problem, and the response received is now shadow.

  I mean you go there, I'm sure that you can choose your answer choice tech but they automatically connect an and then some have no profile pictures, most have so long to TALK? and then some just do shady stuff when they distance controlling me. I must be paranoid or something. Everything what I need to know if it is ok to go without updates because I'm done. Period. Tired of all this, I don't want to waste time trying to solve this Bull.

  So please tell me, I can live without these updates.

  Not really according to your settings update only important updates are necessary, but often the recommended updates are mixed in Important updates due to a simple setting is checked when it should be disabled.

  

  It is expected by M$
  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

  Switch your windows update setting to never check the updates temporarily

  Restart the machine
  Then you download this from your download folder run from there.
  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not
  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check
  updates before running from the downloads folder.

  Once it installs and restarts
  You can reset your updates affecting everything you had before default =...
  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,
  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You need to scroll down to the poster of Joel SC is the last answer on this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• Audio not working do not after Windows 8.1 update

  Hello
  
  A few days ago that I have updated Windows 8.1 evaluation to the full version 8.1 and since then my audio doesn't work. In Control Panel, "Digital Audio display (AMD high definition Audio Device)" is listed as disconnected. The audio icon on the taskbar is XE out and clicking on it works the finder error in vain. Speakers no longer appear in the list of devices well now that nothing works I don't know if they have ever or if the audio comes through display Digital Audio. Headphones do not present as playback device and the volume on the keyboard controls and the taskbar are not accessible. I've never used external speakers.
  
  Windows 8.1 update seemed to wipe all my software HP and AMD came with the laptop so I reinstalled the HP support center and looked for a driver updated and all that jive, but all also shows to date. I don't know what else to look for because most of the forums I've seen seem to speak of their output HDMI sound does not work when it is connected to a TV and I just try to have sound, period.

  HP ENVY Notebook PC m6

  D1C68UA #ABA

  8.1 Windows 64-bit
  APU A10 - 4600M AMD with graphics Radeon (TM) HD
  AMD Radeon HD 7660G
  AMD High Definition Audio Device
  
  Thanks in advance to anyone who can help you. It has been a few days and it's quite annoying when all was dandy just before the update.
  
  Chris

  Hi Chris,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59861.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  If you see a very similar entry for (or entry of IDT) IDT HD Audio , right click on the device and select uninstall - you should also get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.  If there is no input IDT, go just below.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K