No audio HDMI laptop computer connecting VAIO from Sony Soundbar

Similar Questions

• Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

  I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

  * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

  Hi jsserrano68,

  Read the following article about the product keys for Windows:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

  In addition, if you need to contact Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

  Thank you

  Deb

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

• HP Pavilion DV6500: TV laptop computer connection

  Hello

  I just installed Windows 7 and am trying to connect my laptop to my TV. However, when I go to control Panel\Appearance and Personalization\Connect to an external monitor, I don't see the second monitor. (Have used an HDMI cable to connect to the TV).

  p / n: KB341EA #B1A

  Can you provide any help?

  Thank you

  Ioannis

  Here's what I suggest you do.

  Go to the Device Manager, expand the category graphics cards.  Right-click on the graphics card from nvidia and select uninstall and check the box uninstall driver.

  Restart and use the Vista of making driver in charge of your laptop and driver as follows page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-59557-1&cc=us&DLC=en&LC=en&OS=2100&product=3642170&sw_lang=

  Download and run the above driver.  You can get an error not supported operating system.

  Conclusion of any windows error.

  Go to Device Manager, click to expand the category graphics cards, click on the VGA Standard card.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp38834.

  Make sure that the include sub and the driver should install.

  Restart, and I hope that you will now be able to connect to your TV.

  If this isn't the case, then it will not happen.

• hdmi TV/computer connection

  How you connect your computer to a TV to view the photo. I have the hdmi connector

  Moved from feedback

  Original title: tv/computer connection

  Hello

  To help you better, please answer these questions.

  1 Windows operating system work?

  2. What is the brand and model of the TV?

  I suggest you follow the provided articles speaking to connect the computer to the TV using a HDMI cable.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

  Digital cable tuners: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/digital-cable-tuners-frequently-asked-questions

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• WRT320N laptop computer connection issues

  Hi all

  I decided to upgrade my router today to WRT320N. I connect 2 computers wired, wireless 3 computers and a printer of HP Network on a home network. I was able to get the wired machines and the printer goes very well with Windows Vista and the Linksys software. I could not connect wireless laptops. I used the Network Magic program, the Vista network program and the HP Wireless asst without success. I tried using auto detect it on the router, to connect directly from the computer to a wireless network and using the magic network programs, including manual connect and the parameters on a loading USB device and try this on the computer to connect. I'm at my wit's end! Ideas by steps out there on what to do? I rebooted the router and Comcast cable modem x 2 x 4 and all computers at least once. Thank you.

  Tom Brown

  Using Comcast surfboard Motorola Modem (phone, internet) Multi model SBV5220

  Network Magic 5.5.9195.0 - Pure0.LinksysRouterSetup Version

  Operating system is Windows Vista Home Premium w / SP1 32-bit

  Windows Firewall in use

  AVG 9.0 antivirus

  SuperAntiSpyware 4.29. 1004, core 4046 track 1986

  Router WRT320N, firmware 1.0.03 build 010, address Internet IP = 76.103.67.182

  I hope this helps.

  Hi, do you have Network Lock active?  If so, disable it, and then try to connect to your laptop.

• XP SP3 laptop computer connects to various WiFi hotspots but not to an individual.

  Just upgraded to Verizon MiFi 2200 MiFi 4620 the personal hotspot.  Our other Office XP SP3 computer, a Windows 7 laptop and Tablet Android ASUS everything automatically detected and entering the network key/password, all connected to the hotspot and the WWW.

  Fortunately, the XP SP3 laptop connects to other WiFi hotspots and will always connect to the MiFi 2200 old if it is powered even if, of course, he cannot access the WWW, because Verizon's network no longer recognizes the 2200 due service is transferred to the new 4620 MiFi.

  The XP SP3 laptop detects the new hotspot very well.  The command 'View available wireless networks' shows the new hotspot, but when 'Connect' is attempted he goes just in the cycle to appear in the connection, but returned eventually to view available wireless networks.  The 'Connect' button is available, implying that it would connect so click on new.

  Use the same settings (SSID, password, encryption, etc) for the device problem than others who work as they should.  It seems to be an incorrect setting or adjustment in the laptop but I can not understand that one.  I compared the services running on two XP machines and have found no obvious inadequacy.

  Advice?

  Thank you!

  When you say that the new device has the same encryption, do you mean that you know that both old and new devices use the same type of encryption (for example, WPA2, WPA, WPA-TKIP, etc.)?

  I noticed the following two statements in the Guide of the user for the MiFi 4620 L (page 30)

  • WPA/WPA2 Personal joint (safer, less compatible with older devices)
  • IMPORTANT you must use the profile secured with WPA/WPA2 Personal Mode security settings mixed when possible.

  Suggesting that the MiFi 4620 can by default that set... and that the hardware in your computer laptop problem is one of the 'old' devices that is not compatible with this setting.

  Just as an experiment, temporarily configure the MiFi to 'Open' (see pages 30 et seq.) and see if your laptop can connect.

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• No picture on the channel from PC to TV laptop computer connecting Panasonic Plasma tv?

  Original title: connect the computer laptop panasonic plasma tv

  I have a laptop presario V3645AU, connected to the plasma panasonic tv with vga cable. I have no picture on the channel of pc on the TV [via a separate sound cable] should I update my grapics card or drivers for this problem

  Hi Urititi,

  You can try to change the display settings and check. .

  Step 1:

  a. open "display settings" in your computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  b. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Check out the link.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Display problem laptop computer connecting to the TV via HDMI

  I have a Satellite L500 - 19 X and when I connect the laptop to my Sony's Bravia TV, the screen is constantly restless.

  I tried to change the refresh rate, but that did not help. The HDMI cable should not be the problem, because it works very well with my Xbox. The problem is there for both in dual display and expand options display.

  Someone else has the same problem and found a solution?

  Thank you

  > That's the problem for both in dual display and expand options display.
  And when you see the desktop on the TV only?

• I'm trying to connect my Sony Vaio from Sony TV with an HDMI cable but repeat myself "out of range".

  I was able to connect a day ago.

  Try these:

  1. right click on the desktop-> output to-> Dual Display Clone.
   
  2. press on the on your laptop keyboard shortcut that turns on an additional display. The function (FN) FN + F5 keyboard shortcut is used for this purpose on many laptops. On others, it is F4 (HP) or F8 (Dell), usually the F key the monitor on that image.

  3. open Windows Mobility Center by clicking the Start button, click on the Panel, clicking Mobile PC, and then click Mobility Center Windows. And then, on the external display tile, click display of connection, even though it says its connected.

  4. in customizing display settings, try to change the resolution to a setting down like 1024 x 768 and see one that works.
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors

  5. you can also try to change the refresh rate of the screen display, settings, advanced, monitor tab settings.

• L2201x laptop computer connection hdmi/VGA

  What do need me to make this work?

  Hello sevletch,

  In short no it will not work. This Display port FAQ explains that the adapters don't work one way, unfortunately for you is not how your installation is.

  FAQ display port

• No sound when laptop computer connecting to the HDTV

  I used to be on windows vista and often connected my laptop to my HD TV and the sound would play through its speakers. Since the same laptop upgrade to windows 7, now plays the video through the TV and the sound on the speakers to laptop. She did something to my sound card and how to fix it? Have tried all the suggestions on the windows support and no luck. Thank you

  You also pass your specific audio devices to W7 drivers when you went from Vista to W7?

  Assuming that your mobile phone is compatible W7: go to the manufacturer's website, find your particular computer download page and install the correct audio drivers W7.
  If it isn't, then there will be none, then download and install in compatibility mode Vista drivers. You may (or may not) recover some features more.
  See you soon,.
  Jerry

• Laptop computer connection HDTV

  Try to connect my HDTV to my laptop to watch porn TV. Connected via a HDMI cable and selected the right input. My basic desktop with no icons, but everything that I select on the laptop, that I have only the sound and my desctop base coming through my TV, TV series. Can someone tell me what I am doing wrong. Superscrew.

  Hello

  You can upgrade the graphics card and check.

  I suggest you to see the link below:

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Also try changing your screen resolution

  http://Windows.Microsoft.com/en-in/Windows-Vista/change-screen-resolution

  To learn more about the TV connection problem, I suggest you post it here:

  Reference:

  Windows/entertainment and connected home
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

  Hope this information helps.

• laptop computer connection tv s-video / rca cable

  I want to connect my laptop to my tv so I can watch movies from my laptop on my tv.

  I have an Inspiron 700 m mobile and a symphonic TV.  The TV does not have a s video port, just the rca (red, white, and yellow) port.  My laptop has s video port.  So I purchased a s-video / rca cable to connect the two, but it didn't work.  I don't think the laoptop reconizes the tv.  Every time I did something on the laptop, the TV would flicker a few times. Can someone give me instructions step by step on how to connect the two.  I'm kind of a computer dummy so I don't know much; If detailed step by step direstions would be great.  Thank you!