laptop computer connection tv s-video / rca cable

Similar Questions

• Difficulties of laptop computer connection LG HDTV with VGA cable... Help please

  Hi, I'm looking to plug:

  Toshiba laptop - PSC08E-03M001EN http://www.toshiba.co.uk/discontinued-products/satellite-c650-1ct/
  (Windows 7-64 bit)

  LG HDTV - 42LS3400 link to TV-http://www.ebuyer.com/product/367615

  Cable is VGA to red, blue & green cable (don't know name sorry) image of cable here:: http://www.google.co.uk/imgres?um=1&safe=off&client=firefox-a&hs=Y2a&sa=N&rls=org.mozilla:en-GB:official&biw=1366&bih=627&hl=en&tbm=isch&tbnid=urskVAMn94lrQM:&imgrefurl=http://www.alibaba.com/product-gs/631055727/SVGA_VGA_to_Red_Green_Blue.html&docid=2pwndXSQ14pf8M&imgurl=http://i01.i.aliimg.com/img/pb/056/749/507/507749056_659.jpg&w=600&h=453&ei=wvihUbujHvCR0QXx5oH4DA&zoom=1&ved=1t:3588,r:23,s:0,i:162&iact=rc&dur=1185&page=2&tbnh=191&tbnw=253&start=17&ndsp=24&tx=158&ty=123.

  Connections are correct & safe, I have:
  Display settings - 1 | 2 shows multiple monitors, duplicate.
  RES - 1366 x 768, landscape of the screen, displays duplicate.  If I'm reading - 'another view undetected. "

  Graphics settings - Intel Graphics & Media Control Panel-display:
  General: Built-in-Display SEC5641, Res: 1366 x 768, color number: 32 bits, refresh rate: 60 Hz, Rotation: turn to normal, scale: scale full screen
  Several screens: Mode of operation: Clone screens, the main screen: built in display SEC5641, second screen: monitor
  Monitor/TV settings - not supported.

  Sorry about all this info, just want to provide as much as possible help to identify any problems.

  PROBLEM-

  My TV displays a picture of sorts however we jumpy/fragile & show three (vertical) versions of the same image on my TV.  Black & white, its sometimes a offline.

  I have the wires on connected TV where I got my Wired Xbox, the option on my TV to input is the component, when I turn on my laptop & the entry has the value component that I see the image on the screen & clearer, however, after logging in screen disappears & said that there is no signal.  The only way I can see anything either again is by ctrl, alt & del.

  If I switch to AV2 on the choice of appetizer menu on my TV, it shows the description of the jumpy/fragile image, ctrl alt del - although the picture improves slightly & is not fragile, its still very black & white & duplicated in three patrs.

  Any help would be appreciated?

  Thanks in advance

  Cameron

  Hey Cameron,

  I suggest you to change the display settings on the computer and check.

  Get the best display on your monitor

  Connect your computer to a TV

  You can also try to update the latest version of the drivers on the site Web of Toshiba display adapter and check.

  Please post back with the State of the question, so that we can help you further.

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

• Satellite P300 - 18 M - VGA to S-video / RCA cable - no picture on the TV

  Hello

  First of all, I am trying to use my other laptop (Dell Lattitude D630) I have with my TV, however, this other laptop has only a VGA output.

  So I bought a VGA adapter S-video and RCA e - Bay: [photo: http://members.lycos.co.uk/jtfearnley/Hosting/Images/RCA%20To%20S-Video%20RCA.jpg]
  However, this does not work, the laptop in question has 'TV Out through VGA', so it should work according to various Web sites and the seller...

  However, I then tried to test it with my Satellite P300 - 18M and it does not work with this, I tried the composite (yellow port) and S-video port, in three different TV, and there is no picture.

  I tried to change settings in the ATI Catalyst Control Center, for example, force TV detection and it detects the TV, but there is no picture on the TV, only the gray lines.

  If I cange the resolution and refresh rate I can kind of get an image: [image TV | http://members.lycos.co.uk/jtfearnley/Hosting/Images/TV.jpg]
  But it's the best thing.

  In the past, I have used all three TVs with my P300 using direct S-video, so I don't understand why it will not work with this card.

  Also, I know this isn't a forum for Dell, but I am not a Member here, and this question is also on my Toshiba laptop, because it would be useful to be able to use instead of S-video RCA adapter.

  Thank you

  Hello

  To my knowledge the VGA port can be used only in connection with an external monitor/LCD but not with the TV.
  The point is that the common PAL TV (not LCD or plasma) supports a maximum resolution of 720 X 576px 50 Hz (NTSC 720 X 480 at 60 Hz).

  As far as I know that the s-video port provides such a resolution.
  The VGA port offers higher resolutions are supprted by more external monitors.

  However, I never connected the laptop to the TV via the VGA port so I can provide only some assumptions.

  Sure, it might be possible that the S-video and RCA adapter VGA is not fully compatible.
  I read on the different pages that at low cost without name adapters don't work as it should.

• Laptop can connect wirelessly, but not through cable utp to the internet. Help!

  I tried to connect my computer laptop windows 7 to the internet using a utp cable. Unfortunately, without success. Works with wireless, but in my dorm, I cannot use internet via cable. I tried to turn off the wireless, but that did not work either the comouter does not recognize that the cable is already connected. Please help me solve this problem.

  Thanks for your help in advance! :)

  I would check the cable carefully.  Sometimes, some of the wires are loose from the plug.  See if the laptop can connect to cables in other places.  If possible, the problem is with the cable and not on your computer.

  Good luck.

• XP SP3 laptop computer connects to various WiFi hotspots but not to an individual.

  Just upgraded to Verizon MiFi 2200 MiFi 4620 the personal hotspot.  Our other Office XP SP3 computer, a Windows 7 laptop and Tablet Android ASUS everything automatically detected and entering the network key/password, all connected to the hotspot and the WWW.

  Fortunately, the XP SP3 laptop connects to other WiFi hotspots and will always connect to the MiFi 2200 old if it is powered even if, of course, he cannot access the WWW, because Verizon's network no longer recognizes the 2200 due service is transferred to the new 4620 MiFi.

  The XP SP3 laptop detects the new hotspot very well.  The command 'View available wireless networks' shows the new hotspot, but when 'Connect' is attempted he goes just in the cycle to appear in the connection, but returned eventually to view available wireless networks.  The 'Connect' button is available, implying that it would connect so click on new.

  Use the same settings (SSID, password, encryption, etc) for the device problem than others who work as they should.  It seems to be an incorrect setting or adjustment in the laptop but I can not understand that one.  I compared the services running on two XP machines and have found no obvious inadequacy.

  Advice?

  Thank you!

  When you say that the new device has the same encryption, do you mean that you know that both old and new devices use the same type of encryption (for example, WPA2, WPA, WPA-TKIP, etc.)?

  I noticed the following two statements in the Guide of the user for the MiFi 4620 L (page 30)

  • WPA/WPA2 Personal joint (safer, less compatible with older devices)
  • IMPORTANT you must use the profile secured with WPA/WPA2 Personal Mode security settings mixed when possible.

  Suggesting that the MiFi 4620 can by default that set... and that the hardware in your computer laptop problem is one of the 'old' devices that is not compatible with this setting.

  Just as an experiment, temporarily configure the MiFi to 'Open' (see pages 30 et seq.) and see if your laptop can connect.

• Computer laptop-TV connection: no TV video

  Inspiron 1505 - Windows Vista Home Premium - Media Center

  I use an S-video cable with three RCA jacks, plus an audio adapter to connect my TV to my laptop. When I tried this connection two months ago, he had great sound but not picture... So I just put the pending question...

  .. up to - this a week ago, when I clicked on the screen "in THE" on my TV (required for a connection to the computer) and seen the screen of my laptop by mistake! To watch Media Center, I enlarged it in my LCD and boom: beautiful, clear video and live TV I could pause, record, watch in slow-mo... I really thought that I had done!

  Yesterday, however, all this happened to one unfortunate stop after I decided to rearrange the furniture and left the where it is initially set my TV a paltry foot and a pivot 90 degrees. Apparently something happened in this gesture to break the connection because when I lit the game later, what came through was scientifically. There was no video.

  ISo, am right back where I started.

  To be sure I didn't tire/loose anything, I meticulously disconnected, reconnected and shook each cable (on TV, laptop, modem, tuner). Nothing. I have even went into Media Center and handed to zero for the configuration of the TV. Once again, nothing.

  While Googling and spreading by forum, I learned that my few days of joy of Media Center were not even from official Media Center connection, but rather a display of additional office configuration (Btw, I tried FN + F8 to pass the poster and once again - nothing).

  I don't have what could happen - or what to do next.

  Help would be so appreciated.

  
  

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• Equium laptop computer connects cable but not wireless

  Hello

  I m hoping someone can help. I have a laptop Toshiba Equium and it has been connected wireless for centuries. All of a sudden last night it stopped working.
  I have 2 of these laptops and it works fine and all my phones in the House and consoles are connect wireless fine so I know that this is not a problem with the hub.

  I try to make a new connection and it says unable to connect and when I click the diagnose button, it says "windows received no response from the access point or wireless router.

  I can use the net fine with a wired connection to the hub.
  When I check for available wireless connections it shows my super blank hub with excellent signal
  I tried updating drivers and also uninstall the card network wireless and re install but this nature does nothing.

  Please can someone help. more necessary info just reply.

  Thanks in advance to all those who help

  If I understand you right WLAN adapter is installed and enabled correctly, your laptop can detect WLAN but cannot connect to it, right?
  Have you tried to reboot your router?

  What operating system do you use?

• Old TV to laptop computer connection

  I would like to connect my old TV with a s-video cable to my Windows Vista laptop.  I plug both devices and connect the monitor via the display settings, but the screen is still blank.  Any suggestions? Do I need a new driver update, maybe a converter box?

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

  PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• No picture on the channel from PC to TV laptop computer connecting Panasonic Plasma tv?

  Original title: connect the computer laptop panasonic plasma tv

  I have a laptop presario V3645AU, connected to the plasma panasonic tv with vga cable. I have no picture on the channel of pc on the TV [via a separate sound cable] should I update my grapics card or drivers for this problem

  Hi Urititi,

  You can try to change the display settings and check. .

  Step 1:

  a. open "display settings" in your computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  b. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Check out the link.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP250G4 (M9S81EA): the laptop computer does not see the usb cable

  Hello, have a problem with HP250G4 (M9S81EA), doesn't want to install cable diagnostics. After you install the cable drivers, win10-64 cannot define it. All the drivers are installed on your laptop and work properly. The cable is the same worker checked on another laptop. None of the Google tips help not hurt for 3 days with this problem. I hope for your help.

  USB device not recognized
  Works Yusb last device connected to your computer, and windows cannot identify him.

  The request failed usb device descriptor

  I installed on this laptop Win 7.8.10 and the unit still does not work, I think it's a hardware problem of the laptop. But at the same time, other usb devices are working properly on...

  < feature name = 'Application' type = 'Description' sequence-id = "3" >
  < attribute name = "a0" value = "HPAdvSysDiag_USBPort" / >
  < attribute name = "a1" value="5.9.0.0"/ >
  < attribute name = "a2" value = "2" / >
  < attribute name = "p1" value = "09/11/2015" / >
  < attribute name = "p2" value = "F.1A" / >
  < attribute name = 'p3' value = "96.39" / >
  < attribute name = "p5" value = "" / >
  < attribute name = "p15" value = "2" / >
  < attribute name = "p16" value = "0" / >
  < attribute name = "p17" value = "0" / >
  < attribute name = "p20" value = "00000001" / >
  < attribute name = "p4" value = "1" / >
  < attribute name = "p0" value = "2015-12-26 22:45:56" / >
  < attribute name = "p10" value = "0" / >
  < attribute name = "d15" value = "F3" / >
  < attribute name = "a4" value="00.00.00.34"/ >
  < attribute name = "d0" value = "3" / >
  < attribute name = "z0" value = "94L7PW-7R07T8-XD7WMF - 8 d" 7403 "/ >
  < attribute name = "e0" value = "434" / >

  Help someone or not?

• HP Pavilion DV6500: TV laptop computer connection

  Hello

  I just installed Windows 7 and am trying to connect my laptop to my TV. However, when I go to control Panel\Appearance and Personalization\Connect to an external monitor, I don't see the second monitor. (Have used an HDMI cable to connect to the TV).

  p / n: KB341EA #B1A

  Can you provide any help?

  Thank you

  Ioannis

  Here's what I suggest you do.

  Go to the Device Manager, expand the category graphics cards.  Right-click on the graphics card from nvidia and select uninstall and check the box uninstall driver.

  Restart and use the Vista of making driver in charge of your laptop and driver as follows page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-59557-1&cc=us&DLC=en&LC=en&OS=2100&product=3642170&sw_lang=

  Download and run the above driver.  You can get an error not supported operating system.

  Conclusion of any windows error.

  Go to Device Manager, click to expand the category graphics cards, click on the VGA Standard card.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp38834.

  Make sure that the include sub and the driver should install.

  Restart, and I hope that you will now be able to connect to your TV.

  If this isn't the case, then it will not happen.

• Laptop computer connection HDTV

  Try to connect my HDTV to my laptop to watch porn TV. Connected via a HDMI cable and selected the right input. My basic desktop with no icons, but everything that I select on the laptop, that I have only the sound and my desctop base coming through my TV, TV series. Can someone tell me what I am doing wrong. Superscrew.

  Hello

  You can upgrade the graphics card and check.

  I suggest you to see the link below:

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Also try changing your screen resolution

  http://Windows.Microsoft.com/en-in/Windows-Vista/change-screen-resolution

  To learn more about the TV connection problem, I suggest you post it here:

  Reference:

  Windows/entertainment and connected home
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

  Hope this information helps.

• WRT320N laptop computer connection issues

  Hi all

  I decided to upgrade my router today to WRT320N. I connect 2 computers wired, wireless 3 computers and a printer of HP Network on a home network. I was able to get the wired machines and the printer goes very well with Windows Vista and the Linksys software. I could not connect wireless laptops. I used the Network Magic program, the Vista network program and the HP Wireless asst without success. I tried using auto detect it on the router, to connect directly from the computer to a wireless network and using the magic network programs, including manual connect and the parameters on a loading USB device and try this on the computer to connect. I'm at my wit's end! Ideas by steps out there on what to do? I rebooted the router and Comcast cable modem x 2 x 4 and all computers at least once. Thank you.

  Tom Brown

  Using Comcast surfboard Motorola Modem (phone, internet) Multi model SBV5220

  Network Magic 5.5.9195.0 - Pure0.LinksysRouterSetup Version

  Operating system is Windows Vista Home Premium w / SP1 32-bit

  Windows Firewall in use

  AVG 9.0 antivirus

  SuperAntiSpyware 4.29. 1004, core 4046 track 1986

  Router WRT320N, firmware 1.0.03 build 010, address Internet IP = 76.103.67.182

  I hope this helps.

  Hi, do you have Network Lock active?  If so, disable it, and then try to connect to your laptop.