L2201x laptop computer connection hdmi/VGA

Similar Questions

• No audio HDMI laptop computer connecting VAIO from Sony Soundbar

  There is no audio signal when connecting my VAIO SVF14N13CXB win 8.1 race to a bar of his Sony SA-CT26OH.

  Video works very well, and it worked when I "upgraded" to windows 10.  However when I returned to Windows 8.1 it wouldn't work. I tested the cable connecting it to a different TV and audio/video works great.  I've updated all the drivers and showed ' disconnected/disabled' features in the sound settings, but it shows same never a HDMI output for me device allow the way it does on the other TV.

  Bingo!  I thought about it!

  The only way that it would recognize the attached device was if I restarted the laptop and booted up it with the already connected HDMI cable.

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.

• XP SP3 laptop computer connects to various WiFi hotspots but not to an individual.

  Just upgraded to Verizon MiFi 2200 MiFi 4620 the personal hotspot.  Our other Office XP SP3 computer, a Windows 7 laptop and Tablet Android ASUS everything automatically detected and entering the network key/password, all connected to the hotspot and the WWW.

  Fortunately, the XP SP3 laptop connects to other WiFi hotspots and will always connect to the MiFi 2200 old if it is powered even if, of course, he cannot access the WWW, because Verizon's network no longer recognizes the 2200 due service is transferred to the new 4620 MiFi.

  The XP SP3 laptop detects the new hotspot very well.  The command 'View available wireless networks' shows the new hotspot, but when 'Connect' is attempted he goes just in the cycle to appear in the connection, but returned eventually to view available wireless networks.  The 'Connect' button is available, implying that it would connect so click on new.

  Use the same settings (SSID, password, encryption, etc) for the device problem than others who work as they should.  It seems to be an incorrect setting or adjustment in the laptop but I can not understand that one.  I compared the services running on two XP machines and have found no obvious inadequacy.

  Advice?

  Thank you!

  When you say that the new device has the same encryption, do you mean that you know that both old and new devices use the same type of encryption (for example, WPA2, WPA, WPA-TKIP, etc.)?

  I noticed the following two statements in the Guide of the user for the MiFi 4620 L (page 30)

  • WPA/WPA2 Personal joint (safer, less compatible with older devices)
  • IMPORTANT you must use the profile secured with WPA/WPA2 Personal Mode security settings mixed when possible.

  Suggesting that the MiFi 4620 can by default that set... and that the hardware in your computer laptop problem is one of the 'old' devices that is not compatible with this setting.

  Just as an experiment, temporarily configure the MiFi to 'Open' (see pages 30 et seq.) and see if your laptop can connect.

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• Atrix HDMI to laptop computer Vaio HDMI connection does not

  I adapted my Atrix on the multimedia dock, connected power and then connected to the mm HDMI cable anchor on my laptop Vaio HDMI, I have read and understood the firefox browser should be launched directly, but did not, I missed something?

  By the way, I have the kit multimedia motorola set.

  Advise me please.

  Thank you

  There are few things mingle here:

  1. the webtop is initiated when the Atrix is connected to the HD multimedia dock and the dock is connected to the TV via HD.

  2. the webtop includes the full version of Firefox running a customized version of Ubuntu

  3. connect multimedia dock via HDMI to laptop will not work because this HDMI connection on the laptop, the output not in. Also, why put phone firefox on laptop? Just open firefox on the laptop.

  4. connection from computer to phone via USB will launch all apps on the phone. Which allows to "Motorola Phone Portal" (when USB connected) will cause the computer's browser to open and gives you access to some data of the phone - Contacts, SMS, photos and let you handle these things via the computer.

  5 Motorola has another application - Motorola Media Link; You can download and use to manage music and movies.

  6. If you want to use the webtop application when it is connected to a TV, you can, but it takes the phone to have turned on WiFi or an approved carrier data plan - if you want to use internet applications.

• Difficulties of laptop computer connection LG HDTV with VGA cable... Help please

  Hi, I'm looking to plug:

  Toshiba laptop - PSC08E-03M001EN http://www.toshiba.co.uk/discontinued-products/satellite-c650-1ct/
  (Windows 7-64 bit)

  LG HDTV - 42LS3400 link to TV-http://www.ebuyer.com/product/367615

  Cable is VGA to red, blue & green cable (don't know name sorry) image of cable here:: http://www.google.co.uk/imgres?um=1&safe=off&client=firefox-a&hs=Y2a&sa=N&rls=org.mozilla:en-GB:official&biw=1366&bih=627&hl=en&tbm=isch&tbnid=urskVAMn94lrQM:&imgrefurl=http://www.alibaba.com/product-gs/631055727/SVGA_VGA_to_Red_Green_Blue.html&docid=2pwndXSQ14pf8M&imgurl=http://i01.i.aliimg.com/img/pb/056/749/507/507749056_659.jpg&w=600&h=453&ei=wvihUbujHvCR0QXx5oH4DA&zoom=1&ved=1t:3588,r:23,s:0,i:162&iact=rc&dur=1185&page=2&tbnh=191&tbnw=253&start=17&ndsp=24&tx=158&ty=123.

  Connections are correct & safe, I have:
  Display settings - 1 | 2 shows multiple monitors, duplicate.
  RES - 1366 x 768, landscape of the screen, displays duplicate.  If I'm reading - 'another view undetected. "

  Graphics settings - Intel Graphics & Media Control Panel-display:
  General: Built-in-Display SEC5641, Res: 1366 x 768, color number: 32 bits, refresh rate: 60 Hz, Rotation: turn to normal, scale: scale full screen
  Several screens: Mode of operation: Clone screens, the main screen: built in display SEC5641, second screen: monitor
  Monitor/TV settings - not supported.

  Sorry about all this info, just want to provide as much as possible help to identify any problems.

  PROBLEM-

  My TV displays a picture of sorts however we jumpy/fragile & show three (vertical) versions of the same image on my TV.  Black & white, its sometimes a offline.

  I have the wires on connected TV where I got my Wired Xbox, the option on my TV to input is the component, when I turn on my laptop & the entry has the value component that I see the image on the screen & clearer, however, after logging in screen disappears & said that there is no signal.  The only way I can see anything either again is by ctrl, alt & del.

  If I switch to AV2 on the choice of appetizer menu on my TV, it shows the description of the jumpy/fragile image, ctrl alt del - although the picture improves slightly & is not fragile, its still very black & white & duplicated in three patrs.

  Any help would be appreciated?

  Thanks in advance

  Cameron

  Hey Cameron,

  I suggest you to change the display settings on the computer and check.

  Get the best display on your monitor

  Connect your computer to a TV

  You can also try to update the latest version of the drivers on the site Web of Toshiba display adapter and check.

  Please post back with the State of the question, so that we can help you further.

• Display problem laptop computer connecting to the TV via HDMI

  I have a Satellite L500 - 19 X and when I connect the laptop to my Sony's Bravia TV, the screen is constantly restless.

  I tried to change the refresh rate, but that did not help. The HDMI cable should not be the problem, because it works very well with my Xbox. The problem is there for both in dual display and expand options display.

  Someone else has the same problem and found a solution?

  Thank you

  > That's the problem for both in dual display and expand options display.
  And when you see the desktop on the TV only?

• HP Pavilion DV6500: TV laptop computer connection

  Hello

  I just installed Windows 7 and am trying to connect my laptop to my TV. However, when I go to control Panel\Appearance and Personalization\Connect to an external monitor, I don't see the second monitor. (Have used an HDMI cable to connect to the TV).

  p / n: KB341EA #B1A

  Can you provide any help?

  Thank you

  Ioannis

  Here's what I suggest you do.

  Go to the Device Manager, expand the category graphics cards.  Right-click on the graphics card from nvidia and select uninstall and check the box uninstall driver.

  Restart and use the Vista of making driver in charge of your laptop and driver as follows page...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-59557-1&cc=us&DLC=en&LC=en&OS=2100&product=3642170&sw_lang=

  Download and run the above driver.  You can get an error not supported operating system.

  Conclusion of any windows error.

  Go to Device Manager, click to expand the category graphics cards, click on the VGA Standard card.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  This file will be located in C:\SWSetup\sp38834.

  Make sure that the include sub and the driver should install.

  Restart, and I hope that you will now be able to connect to your TV.

  If this isn't the case, then it will not happen.

• No picture on the channel from PC to TV laptop computer connecting Panasonic Plasma tv?

  Original title: connect the computer laptop panasonic plasma tv

  I have a laptop presario V3645AU, connected to the plasma panasonic tv with vga cable. I have no picture on the channel of pc on the TV [via a separate sound cable] should I update my grapics card or drivers for this problem

  Hi Urititi,

  You can try to change the display settings and check. .

  Step 1:

  a. open "display settings" in your computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  b. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Check out the link.

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Laptop computer connection HDTV

  Try to connect my HDTV to my laptop to watch porn TV. Connected via a HDMI cable and selected the right input. My basic desktop with no icons, but everything that I select on the laptop, that I have only the sound and my desctop base coming through my TV, TV series. Can someone tell me what I am doing wrong. Superscrew.

  Hello

  You can upgrade the graphics card and check.

  I suggest you to see the link below:

  Connect your computer to a TV

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Also try changing your screen resolution

  http://Windows.Microsoft.com/en-in/Windows-Vista/change-screen-resolution

  To learn more about the TV connection problem, I suggest you post it here:

  Reference:

  Windows/entertainment and connected home
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

  Hope this information helps.

• WRT320N laptop computer connection issues

  Hi all

  I decided to upgrade my router today to WRT320N. I connect 2 computers wired, wireless 3 computers and a printer of HP Network on a home network. I was able to get the wired machines and the printer goes very well with Windows Vista and the Linksys software. I could not connect wireless laptops. I used the Network Magic program, the Vista network program and the HP Wireless asst without success. I tried using auto detect it on the router, to connect directly from the computer to a wireless network and using the magic network programs, including manual connect and the parameters on a loading USB device and try this on the computer to connect. I'm at my wit's end! Ideas by steps out there on what to do? I rebooted the router and Comcast cable modem x 2 x 4 and all computers at least once. Thank you.

  Tom Brown

  Using Comcast surfboard Motorola Modem (phone, internet) Multi model SBV5220

  Network Magic 5.5.9195.0 - Pure0.LinksysRouterSetup Version

  Operating system is Windows Vista Home Premium w / SP1 32-bit

  Windows Firewall in use

  AVG 9.0 antivirus

  SuperAntiSpyware 4.29. 1004, core 4046 track 1986

  Router WRT320N, firmware 1.0.03 build 010, address Internet IP = 76.103.67.182

  I hope this helps.

  Hi, do you have Network Lock active?  If so, disable it, and then try to connect to your laptop.

• Old TV to laptop computer connection

  I would like to connect my old TV with a s-video cable to my Windows Vista laptop.  I plug both devices and connect the monitor via the display settings, but the screen is still blank.  Any suggestions? Do I need a new driver update, maybe a converter box?

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

  PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

• INTERNET CONNECTION PROBLEM - laptop computer connects is the DNS through the modem to broadband gateway to resolve the address of Web site

  Regardless of the browser that I use on my VISTA laptop, navigation stops... which means the laptop connects is no longer the DNS through the modem to broadband gateway to resolve the address of the Web site.

  However internet is on and some applications that Act on the internet are connected and okay. for example: Skype

  Hello

  Try this process.

  WinSock and TCP/IP

  When parasites get installed on your computer, they might create hooks in the system computer activities related to the program "Junk" files  When you get rid of the 'Junk' hooks could remain in the system, in the absence of target files (they cleaned) problems are created in the network and Internet related activities.

  If after uninstalling the "Junk", the Internet connection does not work as it should, you will need to restart the operating system parts which get trashed by the process.

  WinSock and TCP/IP update.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh int reset

  And the sam to do this.

  ipconfig/flushdns

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Laptop computer connection directly to a projector and cannot see the screen of my laptop

  I'm trying to figure out how to display the screen of my laptop via a projector and also be able to see the screen of my laptop.  When I hit the function key for display on the big screen, my laptop darkens.  I found a post on this forum on the connection of additional views or projector (Set Up Multiple displays). When I go to Mobile PC and display to choose settings listed in the answer (mirrored, extended, etc.) aren't there.  My laptop is running Vista Business Service Pack 2 and two weeks.  Thanks for any help you can provide.

  Hello Shawn,

  Thanks for posting on the Community Forums of Microsoft Vista.

  It should probably be shortened on your laptop keyboard to turn on the visible screen (for example Fn + F5). Try these until you can see the image on the laptop monitor.

  Also, follow the steps and try to set the screen parameter as follows:

  (1) right click on the desktop, click Properties, and on the display settings, choose monitor as your main graphics card 1.

  (2) setup that monitor the as a 2nd external display (projector).

  (3) click on apply and Ok.

  Restart the computer to see if you are able to see the screen on laptop and projector.

  You can also check with the computer manufacturer to check if they have additional parameters to be changed.

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think