No audio I have. MI PC are UN dell inspiron 1420

Similar Questions

• Dell Inspiron 1420 none audio internal speakers.

  Good day, everyone.

  I have Inspiron 1420 Vista 32 of my brother as a gift. He had before and said he had sound from the moment he bought, but later (he doesn't remember when) the sound just disappeared. I reinstalled the system to the factory settings (press F8 and then restored from the recovery D: drive). No audio through loudspeakers. However, I can hear everything if I connect my headphone via jacks-audio connectors. I reinstalled the drivers for the "drivers and utilities" DVD. Same result. I downloaded the two drivers from the download page of Dell (R157031 and R167846) and tried one by one. Same thing. I ran diagnostic test (F12 >... > system > Custom > Audio Analog test and can hear the sound on the speakers.) I tried to remove the driver, and then restart the computer, so Vista can catch the new material and solve the problem, but after that the new hardware has been detected, Windows driver installed, the result is the same. I checked if the speakers are cut and they were not. I checked the control panel > sounds and saw 2 options on the digital playback, and speakers/headphones (with a green check mark) output device. Tried all the options, but still can't hear anything through speakers, but can through the headphones.

  Guys, before I will let fall and broke it laptop, help. Please, I beg you. I'm sure the solution is close, just need advice.

  Jimco

  I don't know about 1420. The 1520 has a taken audio daughterboard here, Reference Dell: RT882.

  It says Vostro 1500, which is the same as the Inspiron 1520. There is a phone number you can call (1-800-357-3355) to see if it is also for the 1420.

  Good day Jimco,.

  I am very happy and proud of me, because I did.  I did it. I did it.

  I fixed the sound. Yesterday, I spent almost an hour talking with Dell customer service, technical department and * knows who else and I got I need to replace my motherboard ($299). I couldn't find any info on the site of Dell Inspiron 1420 Audio Jack Daughterboard as you have shown to me, so I decided to see him personally.

  Today, I disassembled my laptop complete with MANUAL DELL for INSPIRON 1420. NOTE from the ADMIN: Broken link has been removed / replaced this post by Dell > after I pulled out the mother board, I could find (YES!) Audio Jack daughter Board. I started to chat with Dell and spent an hour trying to explain to them, this girl for Inspiron card exists and that I hold in my hand... I showed them your link... I wanted to just buy the card Audio Jack daughter at home, but they have checked my service tag, asked me if I have waranty, where have I bought this laptop... So, accordingly, I have no help from Dell.

  After that I gave up on them, I put up any piece of aluminum foil, touch my problematic jack and then assemble everything back. And VOILA! Everything is fine. I have a sound input of the internal speaker, I have a jack for headphones, a disabled jack and a microphone jack. TADA!

  Thanks Jim, for your attention and support.  I am really grateful for your help.

  Thanks again. And good luck.

• I have no sound after upgrading to Windows 7. I have a Dell Inspiron 1420

  So I sound after upgrading to Windows 7. At one point, I get sound in my headphones. Now I have nothing. I have a Dell Inspiron 1420.

  [Moved from comments]

  Go to the website of Dell, put in your service tag, and download the driver for your audio.

  Good luck.

• Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  Hello

  See how you go with this great piece of software.

  http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

  Concerning

  GT4U

• Microphone Realtek audio driver fails in Skype on 2015 DELL Inspiron 15 7000 series

  Hello world

  I'm having a problem with the Realtek microphone in Skype.

  The symptoms are:

  Shortly after the beginning of the conversation, the other party can not hear my voice. Video is fine, the voice of the other party is also very good.

  When it produced the green bar microphone in the Options settings / audio will not be seen speaking into it.

  However, I can hear what is said into the microphone from the speakers the.

  I uninstalled the microphone in the Manager, re-installed the driver, did not help.

  Uninstalled Realtek hi def audio driver. This helped first but then after 4 minutes speaking the problem comes back again.

  I can see that in this case the speaker icon in

  Control Panel\Hardware and Sound\manage devices\recording\microphone\microphone audio properties\levels

  is barred. If I uncross it and put increased and a level higher than zero the other party can hear me again.

  This happens spontaneously, by himself. Even without running Skype, it is so why I think it might be a driver problem.

  Any ideas? (please no advice "reinstalled the driver" - did several times)

  It seems to me that it is resolved. A ran malware bytes, stuff cleaned, rebooted.

  Works now.

  PS. This is my dad's computer... McAffee doesn't help much, especially when 'you are your best antivirus' strategy is not respected :)

• I've upgraded to Windows 7 and now have no sound. I have a Dell Inspiron 1420

  At one point, I had sound through headphones, but now I have no sound at all (after downloading the latest driver from Dell)

  Uninstall the driver, reboot the system. The attempt to install the same driver for Windows Vista using Windows troubleshooting. Make a right click on the file executable/installer driver-> properties and select the Compatibility tab. Click on the box to check run this program in compatibility mode for option and select Windows Vista from the drop-down list. then try to install the device driver using run as administrator.

  Resources:

  If your computer has problems play a sound, try using the Audio playback problems resolution to solve the problem. For measures and additional information, see o ink below.

  Open the troubleshooting of Audio playback

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-troubleshooterOpen

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx?type=hardware

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

  Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
  
  I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

  ipconfig/all statements

  Hostname...: wayne-PC
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  That's all. Windows gives errors two errors:

  (1) the card network knows of driver or hardware problems

  (2) check that your Internet Protocol connections are Correct

  I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

  I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

  Hi MButIer,

  -How long have you had this problem?
  -Was any change in software because the computer before the show?

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

   

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• My wife and I bought hundreds of iTunes movies and music over the years. I have a terminal illness and won't last long. The account is in my name. How can I ensure that films and the songs that she and I have paid for are accessible for her after I spend

  My wife and I bought hundreds of iTunes movies and music over the years. I have a terminal illness and won't last long. The account is in my name. How can I ensure that films and the songs that she and I have paid for are accessible for her after I die?

  She needs to have your Apple ID and password. Your iCloud ID and the password if you have your own iOS device, so it can have access to these facilities. Even if she wanted to sell, it would need this information to remove the lock of activation before the sale.

• Why have we not areas for DVD playback?

  ORIGINAL TITLE: generalcomplaint

  Why have we not areas for DVD playback? I find it extremely shocking when you lock my machines. How dare you treat me this way. Do you think that it is productive? jerk like more. Fool I would classify as. Please explain.

  Best regards
  Tony Miller

  Microsoft did not parts of DVD. You can read about the regions of DVDs and their justification in the links below.

  DVD regions:
  http://www.hometheaterinfo.com/DVD3.htm

  Why can I play DVD movies, but not others:
  http://www.HowStuffWorks.com/question474.htm

• After compacting emails, all my emails from September 2011 until now have disappeared. Are there opportunities that I get back them?

  After compacting emails, all my emails from September 2011 until now have disappeared. Are there opportunities that I get back them? I use Outlook Exprees and he suggested that I should compact messages. I've done it several times before and everything was OK until

  Two reasons the most common for what you describe is disruption of the compacting process, (never touch anything until it's finished), or bloated folders. More about that below.
   
  Why OE insists on compacting folders when I close it? :
  http://www.insideoe.com/FAQs/why.htm#compact
   
  Why mail disappears:
  http://www.insideoe.com/problems/bugs.htm#mailgone
   
  Recovery methods:
   
  If you are running XP/SP3, then you should have a backup of your dbx files in the Recycle Bin (or possibly the message store), copied as bak files.
   
  To restore a folder bak on the message store folder, first find the location of the message store.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the .dbx files are by default marked as hidden. To view these files in the Solution Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder options | View.
   
  Close OE and in Windows Explorer, click on the dbx to the file missing or empty file, then drag it to the desktop. It can be deleted later once you have successfully restored the bak file. Minimize the message store.
   
  Open OE and, if the folder is missing, create a folder with the * exact * same name as the bak file you want to restore but without the .bak. For example: If the file is Saved.bak, the new folder should be named saved. Open the new folder, and then close OE. If the folder is there, but just empty, continue to the next step.
   
  First of all, check if there is a bak file already in the message. If there is, and you have removed the dbx file, go ahead and rename it in dbx.
   
  If it is not already in the message, open the trash and do a right-click on the file bak for the folder in question and click on restore. Open the message store up and replace the .bak by .dbx file extension. Close the message store and open OE. Messages must be in the folder.
   
  If messages are restored successfully, you can go ahead and delete the old dbx file that you moved to the desktop.
   
  If you have not then bak copies of your dbx files in the Recycle Bin:
   
  DBXpress run in extract disc Mode is the best chance to recover messages:
  http://www.oehelp.com/DBXpress/default.aspx
   
  And see:
  
  http://www.oehelp.com/OETips.aspx#4
   
  A general warning to help avoid this in the future:
   
  Do not archive mail in default OE folders. They finally are damaged. Create your own folders defined by the user for mail storage and move your mail to them. Empty the deleted items folder regularly. Keep user created folders under 300 MB, and also empty as is possible to default folders.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  And backup often.
   
  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx  

• I have 2 OS' are (win 7 & 10) in 2 drives I want two boot he haw can simultaneously do...?

  I have 2 OS' are (win 7 & 10) in 2 drives I want two boot he haw can simultaneously do...?

  Your computer can only work one at a time, unless it has several CPU (no longer)

• The Audio tracks have disapearred from my calendar

  Can Hello someone help me? I just started editing that I have the latest version with all the updates on a computer based on windows wizzy I'm edition fortunately far away and my audio tracks have completely disappeared from my schedule, I can still hear audio but can not see the tracks. I have no idea how get them thank you Heather back

  Place your cursor on the right baseline of V1 at the bottom of the blue box that says V1.

  You will see the cursor change to a line with and up and down arrow.

  When it goes to this slider, click down and hold the mouse button down, move the bottom of the video tracks to the top of the timeline panel. That should reveal the audio tracks.

  MtD

• My paragraph styles have disappeared and are now appearing as the character styles

  Working on a new site because my old site muse become buggy...

  and now, my paragraph styles have disappeared and are now appearing as the character styles

  

  Thank you for sending the files. One of the files does not contain any character or paragraph Styles. In the other, I see the character styles named as paragraph styles. All indications from within the file are that they were created as character styles. The file format includes indications of the type of the style as well on everything that they are applied and in the list displayed in the palette. All of these styles are indicated by styles of characters in both places. The attributes that are in the styles are limited to what is allowed in a character style.

  In some places where the styles are applied, they are applied to the blocks of text or widget and replacements parts for paragraph-level attributes (i.e. h1 tag, space before and after, etc.). This leads me to suspect that they have can be created from blocks of text pointer tool selections (or other elements of text in widgets) and it was perhaps accidental that they have created using character Styles where paragraph Styles Panel rather than the Panel?

• I reinstalled my CS5 on my new laptop and it shows updates to day, but everytime I try to download it is said that they do not have? they are old? Help!

  I reinstalled my CS5 on my new laptop and it shows updates to day, but everytime I try to download it is said that they do not have? they are old? Help!

  Hello

  What operating system do you use?

  You can download and install the updates manually from: http://www.adobe.com/downloads/updates.edu.html

  Kind regards

  Rave

• All workers have failed or are pending

  Hi I'm applying corrective maintenance R12.0.6 on the Oracle Apps R12.0.0 on platform linux 5.4.
  I got the error
  All workers have failed or are pending
  
  I had seen utility adctrl and I am
  Control
  Status of worker Code context Filename
  ------ -------- ----------------- -------------------------- --------------
  1 run waiting AutoPatch R120
  2. run AutoPatch R120 MigrateCauseEffectToDB.cla failed
  3. start waiting AutoPatch R120
  4 perform wait AutoPatch R120
  5. run waiting AutoPatch R120
  6 run AutoPatch R120 Wait
  7 run waiting AutoPatch R120
  8 run waiting AutoPatch R120
  
  and I restart a worker on the current computer
  
  and my log file is visible
  Start of session AD worker *.
  Version of worker AD: 12.0.0
  Worker AD began: Tuesday, December 21, 2010 10:48:06
  
  APPL_TOP is set to/bkp/oracleApps/apps/apps_st/appl
  
  
  Restart worker.
  
  
  Restart worker 8.
  -Change control code to "wait".
  -Start-up of the process.
  -Worker say to read the file of todo is restarted.
  Start of session AD worker *.
  Version of worker AD: 12.0.0
  Worker AD began: Tuesday, December 21, 2010 10:48:13
  
  APPL_TOP is set to/bkp/oracleApps/apps/apps_st/appl
  
  
  Restart worker.
  
  and it takes a lot of time and the status of workers is the same

  Control
  Status of worker Code context Filename
  ------ -------- ----------------- -------------------------- --------------
  1 run waiting AutoPatch R120
  2. run AutoPatch R120 MigrateCauseEffectToDB.cla failed
  3. start waiting AutoPatch R120
  4 perform wait AutoPatch R120
  5. run waiting AutoPatch R120
  6 run AutoPatch R120 Wait
  7 run waiting AutoPatch R120
  8 run waiting AutoPatch R120

  and I restart a worker on the current computer

  and my log file is visible
  Start of session AD worker *.
  Version of worker AD: 12.0.0
  Worker AD began: Tuesday, December 21, 2010 10:48:06

  APPL_TOP is set to/bkp/oracleApps/apps/apps_st/appl

  Restart worker.

  Restart worker 8.
  -Change control code to "wait".
  -Start-up of the process.
  -Worker say to read the file of todo is restarted.
  Start of session AD worker *.
  Version of worker AD: 12.0.0
  Worker AD began: Tuesday, December 21, 2010 10:48:13

  APPL_TOP is set to/bkp/oracleApps/apps/apps_st/appl

  Restart worker.

  and it takes a lot of time and the status of workers is the same

  You must review the error in the file adwork002.log in $APPL_TOP/admin / $TWO_TASK/log and determine what the error is running this class file. Fix the problem and then use adctrl to restart worker 2 only.