no backup copy of "access"\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy53"was denied.

Similar Questions

• How to make a backup copy of Access 2007 in Windows XP?

  I bought a copy of Access 2007 through internet download and I need to make a backup copy.  I have Windows XP Home Edition with S/P 3 installed.  How can I make my backup?  Thank for your time and answers you, you may be able to give me.

  Kay

  Yes, it looks like this.

  its been a while for me that I dealt with iso files.

  However, I would try to just copy this file (like) on the CD.    then in the future, copy him on the hard drive to install msaccess, if necessary.

  but just in case, the foregoing does not (or if this is the case) can also use the methods described here:

  http://www.Petri.co.il/how_to_write_iso_files_to_cd.htm

  so, it would not hurt to keep a couple of disks for each method above.

  also, I learned that our House in discs last as long as commercial.  in order to have a number of CDs for the costly program is a good thing to have.   store one of them inside an old bood to keep out the light.

• How to make a backup copy of my Sansa Fuze 2 GB

  Hello! Can someone tell me how to make a backup copy of my Sansa Fuze 2 GB. I'm going to replace because the wheel is not working properly and I ask (the agent on the Technical Support) on all my music that I have on my MP3 and they tell me to make a copy, but whenever I downloaded on Windows Media Player, I can listen to, but as soon as I disconnect my MP3, I can't play anymore. Can someone help me please, I don't want to lose all my music. Or as a matter of fact again downloaded (too many site to visit again)

  You can manually copy your music from the device to the computer using Windows Explorer, often referred to as 'My Computer' or just 'computer' in different versions of Windows by drag-and-drop, or open the Windows Media Player and "copy of the device" after clicking on the tab sync.

  It is also possible to copy works by using an application like Media Monkey too.

  Many people confused if the Sansa was initially loaded using never WiMP, many are realizing that the application works in both directions.

  Remember, it is important to always have a backup of your music!  It will save you grief!

  Bob

• Copy files to USB devices with iPhone

  I wonder about USB on the go a get lost in the search for information understandable for beginners with regard

  -having a drive hard usb connected

  -have a connected memory card reader

  -copy files between these devices

  Any suspicion of you guys would like to know

  Peter

  Dear Peter

  There are third-party products on the market that help with the files to copy / paste data from your iphone to a memory. (not sure to transfer data to a memory card)

  This is made possible thanks to a unique double-ended USB + a (usually free) soft key working hand in hand to set the formatting. Since this key you can move the data to your PC.

  some of these gadgets must be loaded and can offer additional storage of 256 GB.

  I hope that answers your question?

  Best wishes

• I want to be the format of my hard drive, but have a backup copy of the information of Firefox and passwords and bookmarks so retrieved after formatThank you

  I want to format my hard drive, but have a backup copy of the Firefox information and passwords and bookmarks so recovered after format
  Thank you

  To save bookmarks, see restore bookmarks from a backup or move them to another computer

  If you want to save passwords, you must use an extension like password exporter. It is located at https://addons.mozilla.org/en-US/firefox/addon/2848/ .

• Finals 30 playlist songs fail to copy on an external device.

  How can I get the balance of my playlist music to copy on an external device, an SD card. About 80% of the way through the songs of task 30 last impossible to copy. All had "an error has occurred. Windows media player cannot find the specific file. Make sure the path is correctly entered... etc.
  These files are exactly the same as the 120 first in the playlist. No files have been moved from my library or edited. All were torn off in the same format, wma 192 Kbps. None is protected against copying. They all exist in the library and can be "double click" to play in the "reading list for copy" window media play #9. I even tried to delete a few problem of the library and computing tracks, tearing again to my CD but still no luck. It is also not a question of space from the SD card still has a concert to go left. Clues?

  Hi sirot S V and volunteer j.

  First of all, I want to thank you for taking the time to add your expertise to help solve my problem.

  After trying a lot of research and your suggestions, I think I solved the problem. The SD card has been formatted in the windows default XP in BOLD. Even if there were still 1 gig of so-called room available on this new map he had effectively maxed out using this format.

  Which was also confusing when all the songs in the playlist have been selected to be copied to the device it was not the warning "may not match' usual for the last 30-40 songs. All I kept getting was the opinion of "year error occurred" as they came at last to copy.

  After a lot of frustration and of searching on the web I tried to reformat the card in FAT32. I was completely ignorant of all the different formats and their benefits & cons. After changing the formats, problem solved Bingo. Yes I know. It was a bit of a Homer Simpson moment "Doh!" Oh well all good ends well I guess. Thanks again guys.

• I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system? It is not working properely

  I have an acer aspire one with windows xp preinstalled ~ y at - it a way to get a backup copy of the operating system?  It does not work correctly

  See http://acer.custhelp.com/app/answers/detail/a_id/2631/kw/factory%20restore%20windows%20aspire%20one/related/1

• Can't access the "devices and printers" in Windows 7

  I'm unable to access the "devices and printers" menu in windows 7 (32)

  When I click on the menu, it crashes just a white screen and never load.  I checked the print spooler service and it is running...

  If you have installed McAfee software that can block the enumeration of objects in devices and printers.  Make sure that the Bluetooth service works also if you have any compatible bluetooth devices. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Client needs to access the devices on the existing site to site tunnels

  Hello and thanks in advance.

  We use ASA5510 in respect to the vpn appliance and currently have 90 + vpn tunnels (site to site tunnels) ipsec connected to this ASA.

  Recently, we configure a tunnel for one of our customers (site in tunnel).

  Now, this client must have access at least 10 existing tunnels a site that I have.

  They must be able to access the devices on this segment.

  How should I proceed with this application?

  Can I update all existing tunnels site at 10 to add this range of ip addresses of places (clients)?

  Yes, you need to add this new subnet as interesting traffic on all 10 tunnels (on card crypto ACL) If you need two-way communication.

  Kind regards

  Averroès.

• How to make a backup copy of the emails from Inbox?

  How to make a backup copy (on a memory stick) of all e-mail messages in my Inbox?

  Hello. How to do an export of the new Webmail Outlook?

  Thank you!
  Jacqui.

• VPN connects but can't access internal devices

  Thanks in advance for any help that can be provided.

  I use AnyConnect to create a VPN with an ASA 5505.  Once connected, the client needs to access a device behind a router in 1941.

  Internally, (without using VPN), all my itinerary runs correctly.  My VPN client can connect and when I put a route on my router from 1941, I am able to ping this particular device.  But my VPN client cannot appear ping all the remaining devices on the same internal range as the ASA 5505 or whatever happened on 1941.

  Device far router VPN Client ASA 5505 1941 Workstation

  192.168.201.20---> outside IP x.x.x.x / / internal 192.168.101.1 192.168.101.56 192.168.101.2 / / 192.168.8.1 192.168.8.150

  Client connects and get the IP address of the ASA

  Cannot ping it cannot ping

  Can ping the internal IP address of 1941

  * (after creating a static route)

  I was playing with my setup intensively to try to make this work.  Split tunneling is enabled and is required.

  Here is my current config:

  hostnameMYHOST

  activate mUUvr2NINofYuSh2 encrypted password

  UNDrnIuGV0tAPtz2 encrypted passwd

  names of

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  switchport access vlan 7

  !

  interface Vlan1

  nameif inside

  security-level 100

  192.168.101.1 IP address 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.0.0

  !

  interface Vlan7

  prior to interface Vlan1

  nameif DMZ

  security-level 20

  IP 137.57.183.1 255.255.255.0

  !

  passive FTP mode

  clock timezone STD - 7

  DNS domain-lookup outside

  the obj_any_dmz object-group network

  192.168.101.0 IP Access-list extended sheep 255.255.255.0 allow all

  192.168.201.0 IP Access-list extended sheep 255.255.255.0 allow all

  tunneling split list of permitted access standard 192.168.101.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 DMZ

  mask 192.168.101.125 - 192.168.101.130 255.255.255.0 IP local pool Internal_Range

  IP local pool vpn_pool 192.168.201.20 - 192.168.201.30 mask 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (DMZ) 10 137.57.183.0 255.255.255.0

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  Route inside 192.168.8.0 255.255.255.0 192.168.101.2 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  the ssh LOCAL console AAA authentication

  http server enable 64000

  http 0.0.0.0 0.0.0.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto ca trustpoint ASDM_TrustPoint1

  registration auto

  name of the object CN = MYHOST

  ClientX_cert key pair

  Configure CRL

  string encryption ca ASDM_TrustPoint1 certificates

  certificate 0f817951

  308201e7 a0030201 30820150 0202040f 0d06092a 81795130 864886f7 0d 010105

  05003038 31173015 06035504 03130e41 494d452d 56504e2d 42415455 53311d 30

  1b06092a 864886f7 0d 010902 160e4149 4d452d56 504e2d42 41545553 301e170d

  31333036 32373137 32393335 5a170d32 33303632 35313732 3933355a 30383117

  30150603 55040313 0e41494d 452-5650 4e2d4241 54555331 1d301b06 092 d has 8648

  86f70d01 0902160e 41494d 45 2d56504e 424154 55533081 9f300d06 092 2d has 8648

  86f70d01 01010500 03818d 30818902 00 818100c 9 ff840bf4 cfb8d394 2 c 940430

  1887f25a 49038aa0 1299cf10 bda2a436 227dcdbf f1c5566b c35c2f19 8b3514d3

  4e24f5b1 c8840e8c 60e2b39d bdc0082f 08cce525 97ffefba d42bb087 81b9adb9

  db0a8b2f b643e651 d17cd6f8 f67297f2 d785ef46 c3acbb39 615e1ef1 23db072c

  783fe112 acd6dc80 dc38e94b 6e56fe94 d59d5d02 03010001 300 d 0609 2a 864886

  8181007e f70d0101 05050003 29e90ea0 e337976e 9006bc02 402fd58a a1d30fe8

  b2c1ab49 a1828ee0 488d1d2f 1dc5d150 3ed85f09 54f099b2 064cd 622 dc3d3821

  fca46c69 62231fd2 6e396cd1 7ef586f9 f41205af c2199174 3c5ee887 42b684c9

  7f4d2045 4742adb5 d70c3805 4ad13191 8d802bbc b2bcd8c7 8eec111b 761d89f3

  63ebd49d 30dd06f4 e0fa25

  quit smoking

  crypto ISAKMP allow outside

  crypto ISAKMP policy 40

  preshared authentication

  aes-256 encryption

  sha hash

  Group 5

  life 86400

  Telnet timeout 5

  SSH 0.0.0.0 0.0.0.0 inside

  SSH 0.0.0.0 0.0.0.0 DMZ

  SSH timeout 10

  Console timeout 0

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL encryption rc4 - md5, rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1

  SSL-trust outside ASDM_TrustPoint1 point

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image

  enable SVC

  internal ClientX_access group strategy

  attributes of Group Policy ClientX_access

  4.2.2.2 DNS server value

  VPN-tunnel-Protocol svc

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunneling

  access.local value by default-field

  the address value vpn_pool pools

  IPv6 address pools no

  WebVPN

  SVC mtu 1406

  generate a new key SVC time no

  SVC generate a new method ssl key

  username privilege 15 encrypted password ykAxQ227nzontdIh ClientX

  ClientX username attributes

  VPN-group-policy ClientX_access

  type of service admin

  tunnel-group ClientX type remote access

  attributes global-tunnel-group ClientX

  address pool Internal_Range

  Group Policy - by default-ClientX_access

  type tunnel-group SSLClientProfile remote access

  attributes global-tunnel-group SSLClientProfile

  Group Policy - by default-ClientX_access

  type tunnel-group ClientX_access remote access

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:da38065247f7334a5408b7ada3af29ae

  : end

  OK, lets go on... ;-)

  Split tunneling: the ACL must include all the networks you want to join via the VPN:

  tunneling split list of permitted access standard 192.168.101.0 255.255.255.0

  tunneling split list of permitted access standard 192.168.8.0 255.255.255.0

  NAT: Do not use 'everything' in the nat exemption, but specify all the traffic that should not be natted:

  IP 192.168.101.0 allow Access-list extended sheep 255.255.255.0 192.168.201.0 255.255.255.0

  IP 192.168.8.0 allow Access-list extended sheep 255.255.255.0 192.168.201.0 255.255.255.0

  Routing: The 1941 needs a route for the vpn-pool pointing on the SAA (just in case there is no default route to the ASA)

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Cannot depend on protection against analog copying to the output device so I need to install an updated version.

  original title: I had windows xp and I've upgraded to windows 7 and he said: he cannot depend on protection against analog copying to the output device so I need to install an updated version.

  can you help me please

  Hello

  Thanks for posting your query in the Microsoft Community.

  The problem you are experiencing is not clear. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) when you get this error?

  (3) what exactly you are trying to do?

  (4) that you get an error code?

  (5) did you do changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I would have you look at the article-

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Do get back to us and let us know. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• I need help to disable Adobe CS6 on a device that was stolen and I have more access to what I can reinstall on a new computer. Can you please help?

  I need help to disable Adobe CS6 on a device that was stolen and I have more access to what I can reinstall on a new computer. Can you please help?

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

• Horizon Access Point device - glibc patch

  All,

  I'm trying to get the fix from glibc installed (listed here: https://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2144090) on the access point device 2.0.1. However, I find that rather difficult since SSH does not work. The sshd is present on the device, but even after the service started, trying to SSH to the device does not work. I tried to fix PermitRootLogin Yes , on the/etc/ssh/sshd_config file, but the SSH connection prevents error'ing with the message "software caused the abandonment of the connection.

  I found that iptables is not set to block anything on the device. Nothing is blocking the SSH on my internal network port to the place where the unit sits. How am I supposed to get the installed glibc fix if I can't get the rpm file downloaded on the device?

  Thank you

  Ended up using an internal web server (WSUS server) to host the rpm file and then used wget to retrieve the file on the device. It is now installed.

• Windows can not access the device, the path, or the specified file. you don't have the appropriate permissions to access the item

  Hello

  Can someone tell me how to rule this problem. Windows cannot access the device, to the path or specified file. you peut not have the appropriate permissions for access to item

  You must provide DETAILS... version of Windows and what program do you use?

  Do run as Administrator http://forums.adobe.com/thread/969395 [says again and also to Adobe all emissions] will sometimes fix errors "weird" or "authorization".

  IF a former program and Windows 10

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html